aboutsummaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2022-01-07imx8mn_beacon_2g: Switch to binmanAdam Ford1-1/+1
The standard 1GB Nano was converted to binman, but the 2G version was neglected. Convert it to binman as well. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Adam Ford <aford173@gmail.com>
2022-01-07imx8mn_beacon: Fix booting hang and switch to binmanAdam Ford1-2/+6
Somewhere along the line, the board stopped being able to boot. Rather than just fixing the issue, let's fix the issue and migrate to binman to eliminate a warning when using custom imx tools for generating the binary. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07imx8mm_beacon: Switch to binman for generating imageAdam Ford1-1/+1
To eliminate a warning when using custom imx tools for generating a binary, use binman to generate flash.bin. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-07udoo_neo: Enable support for USB and storagePeter Robinson1-0/+7
Enable support for USB and USB storage on the UDOO Neo. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07udoo_neo: Fix ethernetPeter Robinson1-1/+1
The ethernet has a RMII not RGMII, also needs DM_MDIO and finally initialise it later in the process as it's not needed that early on and not everything is ready so it locks up the device. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07udoo_neo: Fixes for booting from the mSD cardPeter Robinson1-0/+1
This fixes booting from the mSD card from both SPL and when using it for the OS booting. It also cleans up a few mmc booting bits that are no longer needed. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07configs: khadas-vim3{l}_android_ab: enable A/B supportMattijs Korpershoek2-0/+4
meson64_android.h also relies on CMD_AB_SELECT so enable that as well. Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211122152207.219023-5-mkorpershoek@baylibre.com
2022-01-07configs: prepare khadas-vim3{l}_ab_android for AOSP supportMattijs Korpershoek2-0/+214
In AOSP, both VIM3 and VIM3L have 2 bootloader flavors, depending on A/B enablement. For example, for vim3l, the naming is: - u-boot_kvim3l_noab.bin : legacy support - u-boot_kvim3l_ab.bin : A/B support Prepare a defconfig to support u-boot_kvim3_ab.bin and u-boot_kvim3l_ab.bin. This is identical to khadas-vim3{l}_ab_android but will be updated in the next commit. Also update partitioning tables for A/B support. Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211122152207.219023-4-mkorpershoek@baylibre.com
2022-01-07configs: add khadas-vim3{l}_android for AOSP supportMattijs Korpershoek2-0/+214
The Khadas VIM3 and VIM3L board are well supported in AOSP[1]. However, there is no mainline U-Boot support for it. The U-Boot used in AOSP is based on a vendor tree [2] Add all the necessary bits to flash and boot Android for both Khadas VIM3 and VIM3L boards. For Android instructions, refer to [1] [1] https://source.android.com/setup/build/devices#vim3_and_vim3l_boards [2] https://gitlab.com/baylibre/amlogic/atv/u-boot Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211122152207.219023-3-mkorpershoek@baylibre.com
2022-01-07configs: amlogic: Disable CONFIG_NET_RANDOM_ETHADDR when unnecessaryNeil Armstrong23-23/+0
On Meson GXL, GXM, AXG, G12A, G12B & SM1 SoCs, we can generate an unique MAC address if none valid found in the eFuses storage. Only the GXBB based boards doesn't have a fallback way to generate an unique MAC address, so we rely on CONFIG_NET_RANDOM_ETHADDR to have a valid one. An exception is the Radxa Zero board who doesn't have Ethernet on board so depends on an (or multiple) eventual USB adapters, so leaving the CONFIG_NET_RANDOM_ETHADDR configs seems safer. Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Vyacheslav Bocharov <adeep@lexina.in> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211122110710.1038893-1-narmstrong@baylibre.com
2022-01-04configs: iot2050: Drop unused CONFIG_OF_LIST from defconfigJan Kiszka1-1/+0
DTBs are explicitly listed in the image source file for this board, and this list already became outdated. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2022-01-04vexpress64: Clean up BASE_FVP boot configurationPeter Hoyes1-1/+1
Move env var address values to #defines so they can be reused elsewhere. Rename env var names to those recommended in the README and modify addresses to allow more space for the kernel. Fix issue where fdt is called with invalid arguments when booting without a ramdisk. Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2021-12-28Merge tag 'video-next-20211228' of ↵WIP/28Dec2021-nextTom Rini42-0/+44
https://source.denx.de/u-boot/custodians/u-boot-video into next - various fixes to the sandbox display support - support for showing a logo without splash screen config - support for BMP drawing to depths other than 16bpp - tests for the different types of supported BMP images - support showing a logo when running coreboot via qemu
2021-12-27configs: Resync with savedefconfigTom Rini27-42/+27
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_JFFS2_DEV et al to KconfigTom Rini5-0/+11
This converts the following to Kconfig: CONFIG_JFFS2_DEV CONFIG_JFFS2_LZO CONFIG_JFFS2_NAND CONFIG_JFFS2_PART_OFFSET CONFIG_JFFS2_PART_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_KIRKWOOD_GPIO to KconfigTom Rini19-0/+19
This converts the following to Kconfig: CONFIG_KIRKWOOD_GPIO Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_SYS_KWD_CONFIG to KconfigTom Rini39-0/+39
This converts the following to Kconfig: CONFIG_SYS_KWD_CONFIG Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_88F5182 et al to KconfigTom Rini10-10/+7
This converts the following to Kconfig: CONFIG_88F5182 CONFIG_BOARD_IS_OPENRD_BASE CONFIG_BOARD_IS_OPENRD_CLIENT CONFIG_BOARD_IS_OPENRD_ULTIMATE CONFIG_D2NET_V2 CONFIG_FEROCEON CONFIG_FEROCEON_88FR131 CONFIG_INETSPACE_V2 CONFIG_KW88F6192 CONFIG_KW88F6281 CONFIG_KW88F6702 CONFIG_NET2BIG_V2 CONFIG_NETSPACE_LITE_V2 CONFIG_NETSPACE_MAX_V2 CONFIG_NETSPACE_MINI_V2 CONFIG_NETSPACE_V2 CONFIG_SHEEVA_88SV131 At this point mv-plug-common.h is now only an include of mv-common.h so remove that indirection. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_CPU_FREQ_HZ to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_CPU_FREQ_HZ Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_83XX_PCICLK to KconfigTom Rini7-0/+7
This converts the following to Kconfig: CONFIG_83XX_PCICLK Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Finish conversion of CONFIG_SYS_CLK_FREQ to KconfigTom Rini92-0/+92
In order to finish moving this symbol to Kconfig for all platforms, we need to do a few more things. First, for all platforms that define this to a function, introduce CONFIG_DYNAMIC_SYS_CLK_FREQ, similar to CONFIG_DYNAMIC_DDR_CLK_FREQ and populate clock_legacy.h. This entails also switching all users from CONFIG_SYS_CLK_FREQ to get_board_sys_clk() and updating a few preprocessor tests. With that done, all platforms that define a value here can be converted to Kconfig, and a fall-back of zero is sufficiently safe to use (and what is used today in cases where code may or may not have this available). Make sure that code which calls this function includes <clock_legacy.h> to get the prototype. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_SYS_NAND_U_BOOT_OFFS to KconfigTom Rini14-0/+28
This converts the following to Kconfig: CONFIG_SYS_NAND_U_BOOT_OFFS Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_TPL_TEXT_BASE to KconfigTom Rini11-0/+11
This converts the following to Kconfig: CONFIG_TPL_TEXT_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_ZYNQMP_PSU_INIT_ENABLED to KconfigTom Rini7-0/+7
This converts the following to Kconfig: CONFIG_ZYNQMP_PSU_INIT_ENABLED Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_TEGRA_NAND to KconfigTom Rini6-6/+6
This converts the following to Kconfig: CONFIG_TEGRA_NAND Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_SYS_PCI_64BIT to KconfigTom Rini4-0/+4
This converts the following to Kconfig: CONFIG_SYS_PCI_64BIT Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Finish CONFIG_VID et al conversion to KconfigTom Rini62-0/+268
This converts the following to Kconfig: CONFIG_VID CONFIG_VOL_MONITOR_INA220 CONFIG_VOL_MONITOR_IR36021_READ CONFIG_VOL_MONITOR_IR36021_SET CONFIG_VOL_MONITOR_LTC3882_READ CONFIG_VOL_MONITOR_LTC3882_SET To finish this migration, we first need to introduce CONFIG_SPL_VID as some platforms only use this code in full U-Boot while others use it in SPL as well. To make the Kconfig logic clearer, guard all of the sub-options with a if VID || SPL_VID check. Finally, add Kconfig options for the remaining related options that did not previously have one. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_SYS_IMMR to KconfigTom Rini2-2/+0
This converts the following to Kconfig: CONFIG_SYS_IMMR We do this by consolidating the SYS_IMMR options we have and providing defaults. We also, in the few places where M68K was also sharing code with these platforms, define it within the file to CONFIG_SYS_MBAR to match usage. This should be cleaned up longer term. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_WATCHDOG_TIMEOUT_MSECS to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_WATCHDOG_TIMEOUT_MSECS Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Finish converting CONFIG_WATCHDOG, HW_WATCHDOG and WDT to KconfigTom Rini6-4/+2
Because of how these symbols work, and the remaining board config.h file uses, we need to do these at the same time. In some cases we just get to move rather directly to the defconfigs. A few cases require manual intervention. For the case of the eb_cpu5282 we need to select HW_WATCHDOG for the target, given how it's implemented. For the cases of m53menlo, dh_imx6, display5, and display5_factory we disable SPL watchdog support as the particular combination of options they want would require either more symbols or enabling SPL_DM. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT to KconfigTom Rini2-0/+2
This converts the following to Kconfig: CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT In order to do this conversion, expose this option to the user and use "save" not "safe" in the text. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_SUPPORT_EMMC_RPMB to KconfigTom Rini9-0/+9
This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_RPMB This fixes a few platforms where the option was not taking effect as intended. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_CONS_INDEX et al to KconfigTom Rini297-5/+451
This converts the following to Kconfig: CONFIG_CONS_INDEX CONFIG_DEBUG_UART_CLOCK CONFIG_FSL_TZPC_BP147 CONFIG_GENERIC_ATMEL_MCI CONFIG_IDENT_STRING CONFIG_LIBATA CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_LPC32XX_GPIO CONFIG_MP CONFIG_MPC8XXX_GPIO CONFIG_MTD_PARTITIONS CONFIG_MVGBE CONFIG_MXC_GPIO CONFIG_NR_DRAM_BANKS CONFIG_OF_BOARD_SETUP CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_OF_SYSTEM_SETUP CONFIG_PREBOOT CONFIG_ROCKCHIP_SERIAL CONFIG_RTC_ENABLE_32KHZ_OUTPUT CONFIG_RTC_MV CONFIG_SCSI_AHCI CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_SPEED CONFIG_SOFT_SPI CONFIG_SPI_FLASH_EON CONFIG_SPI_FLASH_MACRONIX CONFIG_SPI_FLASH_MTD CONFIG_SPI_FLASH_SPANSION CONFIG_SPI_FLASH_SST CONFIG_SPI_FLASH_STMICRO CONFIG_SUPPORT_RAW_INITRD CONFIG_SYS_ARCH_TIMER CONFIG_SYS_BOARD CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE CONFIG_SYS_DCACHE_OFF CONFIG_SYS_FDT_SAVE_ADDRESS CONFIG_SYS_FLASH_CFI CONFIG_SYS_FSL_ERRATUM_ESDHC135 CONFIG_SYS_HAS_SERDES CONFIG_SYS_L2CACHE_OFF CONFIG_SYS_LITTLE_ENDIAN CONFIG_SYS_LOAD_ADDR CONFIG_SYS_MMCSD_FS_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR CONFIG_SYS_NS16550 CONFIG_SYS_PLLFIN CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_TIMER_SYS_TICK_CH CONFIG_USB_EHCI_FSL CONFIG_U_QE CONFIG_VERSION_VARIABLE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_SD_BOOT et al to KconfigTom Rini15-15/+14
This converts the following to Kconfig: CONFIG_SD_BOOT CONFIG_SD_BOOT_QSPI Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_ENV_SPI_BUS et al to KconfigTom Rini82-178/+2
This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE As part of this, we use Kconfig to provide the defaults now that were done in include/spi_flash.h. We also in some cases change from using CONFIG_ENV_SPI_FOO to CONFIG_SF_DEFAULT_FOO as those were the values in use anyhow as ENV was not enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Clarify CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW in KconfigTom Rini6-6/+0
This is a "hex" prompt but the default value was given as an int. Switch the default to hex (0x0) and remove the defconfigs that were using the default, but as hex before. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-26video: Show the U-Boot logo by defaultSimon Glass2-0/+2
Enable this for boards with a display, unless they are using the SPLASH feature. This shows a U-Boot logo on boards with a display, which seems like a useful thing. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26video: Convert CONFIG_VIDEO_LOGO to KconfigSimon Glass38-0/+38
This converts the following to Kconfig: CONFIG_VIDEO_LOGO Note that this option depends on CONFIG_DM_VIDEO now, since cfb_console is deprecated. The only relevant code is now in splash.c Drop the check for DM_VIDEO in that file. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26video: theadorable: Use RGB565 for BMP blittingSimon Glass2-0/+2
At present this uses RGB555 format for blitting to a display. Sandbox uses 565 and that seems to be more normal for BMP as well. Update the code accordingly and add a test. Note that this likely breaks the theadorable board so we may need to discuss supporting both formats. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26video: Add a test for 16bpp BMP filesSimon Glass2-0/+2
Add a compressed 16bpp BMP file and a test to cover this. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-24configs: rock-pi-4: Enable rockchip efuse supportSjoerd Simons2-0/+2
Enable efuse support for reading the cpuid#, serial# and generate a board unique mac address Signed-off-by: Sjoerd Simons <sjoerd@collabora.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24engicam: px30: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OFJagan Teki1-0/+108
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. C.TOUCH 2.0 is a general purpose carrier board with capacitive touch interface support. 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions. PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged 10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24arm64: dts: rockchip: Sync px30 from linux-nextJagan Teki2-4/+4
Sync the px30 devicetree files from linux-next tree. commit <14ce8069f48b> ("lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup3") Note, this path even sync rk3326 files as it depends on px30. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24rockchip: Kconfig: Enable SPL support for rk3568Nico Cheng1-1/+24
Enable SPL support in Kconfig and add some related option in rk3568_common.h Signed-off-by: Nico Cheng <nico.cheng@rock-chips.com> Signed-off-by: Jason Zhu <jason.zhu@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-23fdt: Enable OF_HAS_PRIOR_STAGE for most boards with OF_BOARDSimon Glass27-27/+0
Use this new Kconfig instead of OF_BOARD, so we know for sure which boards obtain their devicetree from a prior stage. Leave sandbox alone since it does not. Also don't touch xilinx_versal_virt since it does not have a specific TARGET Kconfig. This option implies OF_BOARD for now, but with future work standard passage may be used instead. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add rpi_4_32b and rpi_arm64 to the list of boards converted] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-23fdt: Make OF_BOARD a bool optionSimon Glass3-0/+4
This should not be a separate option from OF_SEPARATE. It is a run-time option to override the devicetree, even if present. Move the option out of the choice. Disable BINMAN_FDT for a few boards which don't actually use it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-23arm: highbank: Add devicetree filesSimon Glass1-0/+1
Add an empty version of this file, so that we can at least build this board when devicetrees are required. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-23arm: qemu-ppce500: Add a devicetree fileSimon Glass1-0/+1
This uses QEMU virt which creates its own devicetree. Add an empty version of this file, so that we can at least build this board when devicetrees are required. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-23arm: bcm7xxx: Add a devicetree fileSimon Glass2-0/+2
Add an empty devicetree file for these boards. It seems to be possible to obtain a real one from another bootloader called 'bolt' but I will leave this to the maintainer. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-23arm: xilinx_versal_virt: Add a devicetree fileSimon Glass1-0/+1
Add an empty file to prevent build errors when building with CONFIG_OF_SEPARATE enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-07-14 21:29:32 +0000