aboutsummaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2022-06-06configs: Resync with savedefconfigWIP/06Jun2022-nextTom Rini71-92/+24
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06riotboard, syzygy_hub: Disable SPL_FALCON_BOOT_MMCSDTom Rini2-4/+0
Looking at the git history and values used for the raw kernel/args location, it's clear these platforms only ever did Falcon Mode via filesystem images and not raw MMC/SD locations. Disable CONFIG_SPL_FALCON_BOOT_MMCSD. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR et al to KconfigTom Rini34-0/+68
This converts the following to Kconfig: CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_NAND_SPL_KERNEL_OFFS to KconfigTom Rini15-0/+15
This converts the following to Kconfig: CONFIG_SYS_NAND_SPL_KERNEL_OFFS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_SPL_ARGS_ADDR to KconfigTom Rini31-1/+30
This converts the following to Kconfig: CONFIG_SYS_SPL_ARGS_ADDR In doing so, we also consistently use this variable for SPL_OS_BOOT and not CONFIG_SYS_FDT_BASE in some cases. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_TARGET to KconfigTom Rini52-0/+52
This converts the following to Kconfig: CONFIG_SPL_TARGET Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_GD_ADDR to KconfigTom Rini43-0/+43
This converts the following to Kconfig: CONFIG_SPL_GD_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to KconfigTom Rini290-0/+706
This converts the following to Kconfig: CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_SPL_MALLOC_START We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to control if we have a malloc pool or not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_BSS_START_ADDR to KconfigTom Rini236-0/+440
This converts the following to Kconfig: CONFIG_SPL_BSS_START_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_RELOC_TEXT_BASE et al to KconfigTom Rini52-9/+207
This converts the following to Kconfig: CONFIG_SPL_RELOC_TEXT_BASE CONFIG_SPL_RELOC_STACK CONFIG_SPL_RELOC_MALLOC_ADDR CONFIG_SPL_RELOC_MALLOC_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06imx7: Update CONFIG_SPL_STACK defaults in KconfigTom Rini8-16/+0
Update the Kconfig entry to have the correct defaults for i.MX7 platforms, and move the existing large comment from imx7_spl.h to doc/imx/common/imx7.txt so that it's not lost. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06imx6: Update CONFIG_SPL_STACK defaults in KconfigTom Rini54-108/+0
Update the Kconfig entry to have the correct defaults for i.MX6 platforms, and move the existing large comment from imx6_spl.h to doc/imx/common/imx6.txt so that it's not lost. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_STACK to KconfigTom Rini486-0/+812
This converts the following to Kconfig: CONFIG_SPL_STACK Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.hTom Rini539-0/+1076
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_COMMON_INIT_DDR to KconfigTom Rini36-0/+45
This converts the following to Kconfig: CONFIG_SPL_COMMON_INIT_DDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06ppc / layerscape: Clean up CONFIG_SYS_CCSR_DO_NOT_RELOCATE usageTom Rini52-0/+52
A number of PowerPC platforms define this, for SPL. To move this to Kconfig, it needs to be CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE, so use CONFIG_IS_ENABLED() to check for usage. A number of layerscape platforms bring this logic from PowerPC, but only need a small part of it, for the fman driver. Remove their unused portion at least. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_SYS_MALLOC_SIMPLE to KconfigTom Rini10-0/+10
This converts the following to Kconfig: CONFIG_SPL_SYS_MALLOC_SIMPLE The problem here is that a few platforms have been doing: #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_MALLOC_SIMPLE #endif instead of defining CONFIG_SPL_SYS_MALLOC_SIMPLE directly. Correct this and update the documentation in a few places to match usage. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_BSS_MAX_SIZE et al to KconfigTom Rini325-0/+367
This converts the following to Kconfig: CONFIG_SPL_BSS_MAX_SIZE CONFIG_SPL_MAX_FOOTPRINT Note that the da850evm platforms were violating the "only use one" rule here, and so now hard-code their BSS limit. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_PAD_TO et al to KconfigTom Rini390-6/+513
This converts the following to Kconfig: CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE CONFIG_TPL_PAD_TO CONFIG_TPL_MAX_SIZE Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the existing places. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_FS_LOAD_PAYLOAD_NAME et al to KconfigTom Rini39-0/+43
This converts the following to Kconfig: CONFIG_SPL_FS_LOAD_ARGS_NAME CONFIG_SPL_FS_LOAD_KERNEL_NAME CONFIG_SPL_FS_LOAD_PAYLOAD_NAME Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_NAND_RAW_ONLY et al to KconfigTom Rini6-0/+11
This converts the following to Kconfig: CONFIG_SPL_NAND_RAW_ONLY CONFIG_SPL_NAND_SOFTECC Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_INIT_MINIMAL et al to KconfigTom Rini52-0/+77
This converts the following to Kconfig: CONFIG_SPL_INIT_MINIMAL CONFIG_SPL_FLUSH_IMAGE CONFIG_SPL_SKIP_RELOCATE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_CFI_FLASH_STATUS_POLL to KconfigTom Rini9-0/+9
This converts the following to Kconfig: CONFIG_SYS_CFI_FLASH_STATUS_POLL Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_FLASH_CFI_WIDTH to KconfigTom Rini34-0/+34
This converts the following to Kconfig: CONFIG_SYS_FLASH_CFI_WIDTH Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_BOOTPARAMS_LEN to KconfigTom Rini56-0/+57
This converts the following to Kconfig: CONFIG_SYS_BOOTPARAMS_LEN Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_BARGSIZE to KconfigTom Rini5-0/+5
This converts the following to Kconfig: CONFIG_SYS_BARGSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_CBSIZE to KconfigTom Rini333-0/+333
This converts the following to Kconfig: CONFIG_SYS_CBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_PBSIZE to KconfigTom Rini976-0/+977
This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_MAXARGS to KconfigTom Rini558-0/+558
This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06configs: fsl: add missing SYS_FMAN_FW_ADDR definesCamelia Groza2-0/+2
Two defconfigs were missed when transitioning the SYS_FMAN_FW_ADDR symbol to Kconfig. CONFIG_SYS_FMAN_FW_ADDR is currently initialized to 0 by default on these builds, which prevents the firmware from loading. Add the correct symbols to these defconfigs. Fixes: a97a071d10d2b ("configs: fsl: migrate FMAN/QE specific defines to Kconfig") Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
2022-06-03imx: imx8mq: select CONFIG_CMD_CLKPeng Fan1-0/+1
select CONFIG_CMD_CLK to enable dump clk in uboot shell Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-05-27Merge https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini4-0/+4
2022-05-26riscv: ae350: Fix OF_BOARD boot failureRick Chen4-0/+4
Disable BINMAN_FDT for ae350 boards which don't actually use it. Fixes: 836eac7c6fe3 ("fdt: Make OF_BOARD a bool option") Signed-off-by: Rick Chen <rick@andestech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-05-25Merge tag 'xilinx-for-v2022.07-rc4' of ↵WIP/25May2022Tom Rini4-4/+0
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2022.07-rc4 zynqmp: - Fix DP PLL configuration for zcu102/zcu106 and SOM - Fix split mode for starting R5s - DT fixes - Remove firmware node for mini configurations - Wire TEE for multi DTB fit image xilinx: - Handle board_get_usable_ram_top(0) properly phy: - Extend psgtr timeout mmc: - Fix mini configuration which misses zynqmp_pm_is_function_supported()
2022-05-24Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiWIP/24May2022Tom Rini2-2/+1
The bulk of it is (finally!) some DT sync from the kernel. We refrained from syncing one incompatible change, as this would spoil booting Linux kernels before v5.13 with U-Boot's DT (via UEFI, for instance). I test booted Linux v5.18 and v5.4 with that new DT on some boards, and the headless peripherals (MMC, USB, Ethernet) seemed to work. The rest are fixes: - silencing missing clock warnings due to the new pinctrl driver - fixing "UART0 on PortF", allowing UART access through the SD card pins - add an F1C100s clock driver, to enable MMC support (SPI comes later) - some cleanups for CONS_INDEX_n in Kconfig Tested on BananaPi-M1, Pine64-LTS, Pine-H64, X96-Mate (H616) and OrangePi-Zero.
2022-05-23arm: socfpga: Add the terasic de10-standard boardHumberto Naves1-0/+66
Use the de10-nano files as templates for the de10-standard board. The files in qts directory are generated by quartus from the GHRD design. Signed-off-by: Humberto Naves <hsnaves@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de>
2022-05-23configs: Resync with savedefconfigTom Rini32-41/+7
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-23ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2Marek Vasut1-0/+244
Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-23ARM: imx: mx5: Convert MX53 Menlo board to DM I2C and DM RTCMarek Vasut1-6/+2
Convert the board to DM I2C and DM RTC. This leads to removal of board side iomuxc configuration, which is now done using pin control driver, and conversion of board side legacy I2C accessors to DM ones. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2022-05-23Revert "sunxi: f1c100s: Drop SYSRESET to enable reset functionality"Andre Przywara1-1/+0
The original Allwinner F1C100 .dtsi imported from the Linux kernel tree used the wrong compatible string for the watchdog timer, so the Allwinner DM reset driver was not working properly. We worked around this by disabling the SYSRESET driver, so the hardcoded SPL reset driver took over. Now the issue was fixed in the DTs in mainline Linux, and we synced the fixed .dtsi file into U-Boot, so drop the hack and use the normal U-Boot proper reset infrastructure. This reverts commit cfcf1952c11e6ffcbbf88eb63c49edca2acf1d5e. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-05-23ARM: dts: sunxi: A13/A31/A23/A33: Sync from Linux v5.18-rc1Samuel Holland1-1/+1
Copy the devicetree source for the A10s/A13/GR8, A31(s), and A23/A33/R16 SoCs and all existing boards from the Linux v5.18-rc1 tag. These changes are combined into one commit due to interdependencies: - The unit addresses were removed from bitbanged I2C buses, which drives a Kconfig default change. This affects sun5i-a13-utoo-p66.dts and sun6i-a31-colombus.dts. - The pinctrl nodes were renamed, including some used by the shared header sunxi-reference-design-tablet.dtsi. To maintain ABI compatibility with existing LTS kernels, one change moving some IP blocks to the r_intc interrupt controller is excluded. This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2. This commit renames the file sun8i-r16-nintendo-nes-classic-edition.dts to sun8i-r16-nintendo-nes-classic.dts to match the Linux tree. This commit also adds the following new board devicetrees: - sun5i-a13-licheepi-one.dts - sun5i-a13-pocketbook-touch-lux-3.dts - sun5i-gr8-evb.dts - sun8i-a23-ippo-q8h-v1.2.dts - sun8i-a23-ippo-q8h-v5.dts - sun8i-a33-et-q8-v1.6.dts - sun8i-a33-ippo-q8h-v1.2.dts - sun8i-r16-nintendo-super-nes-classic.dts As with the other SoCs, updates of note are conversion of GPIO pull-up from pinconf to GPIO flags and renaming the detection GPIO properties in the USB PHY nodes. Signed-off-by: Samuel Holland <samuel@sholland.org>
2022-05-20ARM: dts: imx: Migrate iMX6QDL picoITX DTs from LinuxPhilip Oberfichtner1-1/+1
Migrate DH picoITX device trees from Linux commit 42226c989789 (tag v5.18-rc7). No changes have been made, the DTs are exact copies. Furthermore add the DTB to dh_imx6_defconfig. Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-05-20ARM: dts: imx: Migrate iMX6QDL DRC02 DTs from LinuxPhilip Oberfichtner1-1/+1
Migrate DH DRC02 device trees from Linux commit 42226c989789 (tag v5.18-rc7). No changes have been made, the DTs are exact copies. Furthermore add the DTB to dh_imx6_defconfig. Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-05-20imx: imx8mp_rsb3720a1: convert to DM_SERIALPeng Fan2-0/+2
Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already marked with u-boot,dm-spl. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-05-20imx8mp_rsb3720a1: Enable cache in SPLFabio Estevam2-4/+0
There is no reason for disabling I-cache and D-cache in SPL. Remove the unneeded CONFIG_SPL_SYS_ICACHE_OFF and CONFIG_SPL_SYS_DCACHE_OFF options. Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-05-20cgtqmx8: Enable cache in SPLFabio Estevam1-2/+0
There is no reason for disabling I-cache and D-cache in SPL. Remove the unneeded CONFIG_SPL_SYS_ICACHE_OFF and CONFIG_SPL_SYS_DCACHE_OFF options. Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-05-20imx8mm-cl-iot-gate: Enable cache in SPLFabio Estevam2-4/+0
There is no reason for disabling I-cache and D-cache in SPL. Remove the unneeded CONFIG_SPL_SYS_ICACHE_OFF and CONFIG_SPL_SYS_DCACHE_OFF options. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
2022-05-20bosch: Add initial board support for ACCPhilip Oberfichtner1-0/+110
The Bosch ACC (Air Center Control) Board is based on the i.MX6D. The device tree is copied from Linux, see [1]. The only difference compared to the Linux DT is the removal of usbphynop properties. They are defined in the Linux version of imx6qdl.dtsi, but not in the u-boot version. [1] Commit 6192cf8ac082 from git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-05-20kontron-sl-mx8mm: Select the CONFIG_CMD_UNZIP optionFabio Estevam1-1/+1
Select the CMD_UNZIP option so that the 'gzwrite' command can be used to flash wic.gz image into the eMMC. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-05-20imx: imx8mp_evk: enable pinctrl_wdog in SPLPeng Fan1-1/+0
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code, The set_wdog_reset() function is not necessary as this is handled by the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property being set. Signed-off-by: Peng Fan <peng.fan@nxp.com>
generated by cgit v1.1 at 2024-08-12 02:34:55 +0000