aboutsummaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2022-07-05Convert CONFIG_KIRKWOOD_PCIE_INIT et al to KconfigWIP/2022-07-05-more-Kconfig-migrationsTom Rini3-0/+3
This converts the following to Kconfig: CONFIG_KIRKWOOD_EGIGA_INIT CONFIG_KIRKWOOD_PCIE_INIT CONFIG_KIRKWOOD_RGMII_PAD_1V8 CONFIG_KM_DISABLE_PCIE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_PCI_MSC01 to KconfigTom Rini4-0/+4
This converts the following to Kconfig: CONFIG_PCI_MSC01 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_SH7751_PCI to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SH7751_PCI Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_PCI_GT64120 to KconfigTom Rini4-0/+4
This converts the following to Kconfig: CONFIG_PCI_GT64120 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_PCI_SCAN_SHOW to KconfigTom Rini6-0/+6
This converts the following to Kconfig: CONFIG_PCI_SCAN_SHOW Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_PCIE_IMX to KconfigTom Rini9-0/+9
This converts the following to Kconfig: CONFIG_PCIE_IMX Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_PCIE1 et al to KconfigTom Rini146-0/+493
This converts the following to Kconfig: CONFIG_PCIE1 CONFIG_PCIE2 CONFIG_PCIE3 CONFIG_PCIE4 CONFIG_PCI1 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_LAYERSCAPE_NS_ACCESS to KconfigTom Rini75-121/+196
This converts the following to Kconfig: CONFIG_LAYERSCAPE_NS_ACCESS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_FSL_FIXED_MMC_LOCATION et al to KconfigTom Rini18-0/+18
This converts the following to Kconfig: CONFIG_FSL_FIXED_MMC_LOCATION CONFIG_ESDHC_HC_BLK_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05powerpc: Clean up CHAIN_OF_TRUST related optionsTom Rini1-5/+6
As things stand currently, there is only one PowerPC platform that enables the options for CHAIN_OF_TRUST. From the board header files, remove a number of never-set options. Remove board specific values from arch/powerpc/include/asm/fsl_secure_boot.h as well. Rework include/config_fsl_chain_trust.h to not abuse the CONFIG namespace for constructing CHAIN_BOOT_CMD. Migrate all of the configurable addresses to Kconfig. If any platforms are re-introduced with secure boot support, everything required should still be here, but now in Kconfig, or requires migration of an option to Kconfig. Cc: Peng Fan <peng.fan@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_SYS_FSL_SEC_MON et al to KconfigTom Rini16-0/+16
This converts the following to Kconfig: CONFIG_SYS_FSL_SEC_MON CONFIG_SYS_FSL_SEC_MON_BE CONFIG_SYS_FSL_SEC_MON_LE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_ESDHC_DETECT_QUIRK to KconfigTom Rini14-0/+14
This converts the following to Kconfig: CONFIG_ESDHC_DETECT_QUIRK Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05nxp: Make board/freescale/common/Kconfig safe to include once in arch/KconfigTom Rini5-0/+5
The way that we use this file currently means that we have to guard it in every platform Kconfig. But it is also required in all NXP platforms, including non-reference platforms. Make all options in it have appropriate dependencies so that we can include it a single time under arch/Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_SYS_DDR_RAW_TIMING to KconfigTom Rini47-0/+47
This converts the following to Kconfig: CONFIG_SYS_DDR_RAW_TIMING Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_SYS_SPD_BUS_NUM to KconfigTom Rini47-0/+47
This converts the following to Kconfig: CONFIG_SYS_SPD_BUS_NUM Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_USB_GADGET_DWC2_OTG_PHY to KconfigTom Rini6-0/+6
This converts the following to Kconfig: CONFIG_USB_GADGET_DWC2_OTG_PHY Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_USE_ONENAND_BOARD_INIT to KconfigTom Rini3-0/+3
This converts the following to Kconfig: CONFIG_USE_ONENAND_BOARD_INIT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_SAMSUNG_ONENAND to KconfigTom Rini3-0/+3
This converts the following to Kconfig: CONFIG_SAMSUNG_ONENAND Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-07-05Rename CONFIG_PWM to CONFIG_PWM_S5P and move to KconfigTom Rini2-0/+2
We rename the S5P specific "CONFIG_PWM" to CONFIG_PWM_S5P and move it to Kconfig. Given the usage of CONFIG_PWM_NX, we have that select this new symbol. Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-07-05Convert CONFIG_ENABLE_36BIT_PHYS to KconfigTom Rini81-0/+81
This converts the following to Kconfig: CONFIG_ENABLE_36BIT_PHYS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_DW_ALTDESCRIPTOR to KconfigTom Rini8-0/+8
This converts the following to Kconfig: CONFIG_DW_ALTDESCRIPTOR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-30Merge tag 'u-boot-at91-2022.10-a' of ↵WIP/30Jun2022-nextTom Rini3-0/+39
https://source.denx.de/u-boot/custodians/u-boot-at91 into next First set of u-boot-at91 features for the 2022.10 cycle: This feature set includes mostly fixes and alignments: DT alignment with Linux for sama7g5, removal of invalid eeprom compatibles, removal of extra debug_uart_init calls for all at91 boards, support for pio4 driver pioE bank, and other minor fixes and enhancements for sam9x60 and sama5d2_icp boards.
2022-06-30Merge tag 'versal-qspi-for-v2022.10' of ↵Tom Rini1-0/+2
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Versal QSPI/OSPI changes for v2022.10 - Add new flash types - Add cadence ospi driver for Xilinx Versal
2022-06-29Merge branch '2022-06-28-Kconfig-migrations' into nextTom Rini298-37/+503
- Convert a large number of CONFIG symbols to Kconfig. Of note is a large chunk of USB symbols (and dead code removal), ensuring all SPL/TPL/VPL symbols have an appropriate dependency, largely (but not entirely) removing the testing of CONFIG_SPL_BUILD in board headers, and allowing CONFIG_EXTRA_ENV_TEXT and CONFIG_EXTRA_ENV_SETTINGS to co-exist as this facilities migration of many platforms.
2022-06-29arm64: versal: Add versal specific cadence ospi driverT Karthik Reddy1-0/+2
Add support for cadence ospi driver for Versal platform. This driver provides support for DMA read operation which utilizes cadence qspi driver. If "cdns,is-dma" DT property is specified use dma for read operation from cadence_qspi driver. As cadence_qspi_apb_dma_read() is defined in cadence_ospi_versal driver add a weak function defination in cadence_qspi driver. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Link: https://lore.kernel.org/r/20220512100535.16364-3-ashok.reddy.soma@xilinx.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-28Complete migration of MTDPARTS_DEFAULT / MTDIDS_DEFAULT, include in environmentTom Rini8-0/+12
- Ensure that everyone setting mtdids= and mtdparts= is doing so via the CONFIG options. - If the CONFIG options are set, ensure that the default environment sets mtdparts / mtdids. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Rename CONFIG_SYS_AUTOLAOD to CONFIG_SYS_DISABLE_AUTOLOADTom Rini41-0/+41
The "autoload" environment variable is always checked with env_get_yesno as it can be set to any form of no. The default behavior of env_get_yesno is to return -1 on variables that are not set, which acts as true in general (we test for non-zero return). To convert CONFIG_SYS_AUTOLOAD to Kconfig, given that it was almost always used to set autoload to no, first rename to CONFIG_SYS_DISABLE_AUTOLOAD for consistency sake. Then, make it so that if enabled we set autoload=0 in the default environment. Migrate all platforms which set CONFIG_SYS_AUTOLOAD to non-true or that set autoload to false in their default environment to using CONFIG_SYS_DISABLE_AUTOLOAD Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_ENV_RANGE to KconfigTom Rini20-0/+20
This converts the following to Kconfig: CONFIG_ENV_RANGE Now that this is in Kconfig we can enforce a minimum size and so remove the check in C code to ensure range is larger than size. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_USB_MAX_CONTROLLER_COUNT to KconfigTom Rini71-0/+71
This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28mx6memcal: Remove SPL_USB_HOSTTom Rini1-1/+0
As this particular platform is intended to be loaded and run a specific set of routines in SPL, we do not need the ability to further use the USB as a host device in SPL. Disable this support. Cc: Eric Nelson <eric@nelint.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Eric Nelson <eric@nelint.com>
2022-06-28Convert CONFIG_FPGA_STRATIX_V to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_FPGA_STRATIX_V Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_ENV_MIN_ENTRIES et al to KconfigTom Rini2-0/+2
This converts the following to Kconfig: CONFIG_ENV_MIN_ENTRIES CONFIG_ENV_MAX_ENTRIES Cc: Michal Simek <michal.simek@amd.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_SYS_MPC85XX_NO_RESETVEC to KconfigTom Rini53-0/+85
This converts the following to Kconfig: CONFIG_SYS_MPC85XX_NO_RESETVEC Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28video: Migrate exynos display options to KconfigTom Rini4-0/+12
Following how it's done for the majority of drivers, add a new VIDEO_EXYNOS option and Kconfig file under drivers/video/exynos and list the current options there. Cc: Anatolij Gustschin <agust@denx.de> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2022-06-28arm: samsung: Migrate a number of symbols to KconfigTom Rini4-0/+4
- In a number of cases, use CONFIG_ARCH_EXYNOS[45] rather than CONFIG_EXYNOS[45] - In other cases, test for CONFIG_ARCH_EXYNOS or CONFIG_ARCH_S5PC1XX - Migrate specific SoC CONFIG values to Kconfig - Use CONFIG_TARGET_x rather than CONFIG_x - Migrate other CONFIG_EXYNOS_x symbols to Kconfig - Reference CONFIG_EXYNOS_RELOCATE_CODE_BASE directly as EXYNOS_RELOCATE_CODE_BASE - Rename CONFIG_S5P_PA_SYSRAM to CONFIG_SMP_PEN_ADDR to match the rest of U-Boot usage. Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_LBA48 et al to KconfigTom Rini128-0/+178
This converts the following to Kconfig: CONFIG_LBA48 CONFIG_SYS_64BIT_LBA Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_FSL_SATA_V2 to KconfigTom Rini44-0/+44
This converts the following to Kconfig: CONFIG_FSL_SATA_V2 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_TEGRA_GPU to KconfigTom Rini9-0/+9
This converts the following to Kconfig: CONFIG_TEGRA_GPU Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_EFLASH_PROTSECTORS to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_EFLASH_PROTSECTORS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_E1000_NO_NVM to KconfigTom Rini2-0/+2
This converts the following to Kconfig: CONFIG_E1000_NO_NVM Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28powerpc: mpc85xx: Set TEXT_BASE addresses to real base valuesPali Rohár44-108/+108
Currently CONFIG_SPL_TEXT_BASE and CONFIG_SYS_TEXT_BASE addresses are manually increased by 0x1000 due to .bootpg section. This section has size of 0x1000 bytes and is manually put by linker script before .text section (and therefore before base address) when CONFIG_SYS_MPC85XX_NO_RESETVEC is set. Due to this fact lot of other config options are manually increased by 0x1000 value to make correct layout. Note that entry point is not on CONFIG_SPL_TEXT_BASE (image+0x1000) but it is really on address CONFIG_SPL_TEXT_BASE-0x1000 (means at the start of the image). Cleanup handling of .bootpg section when CONFIG_SYS_MPC85XX_NO_RESETVEC is set. Put .bootpg code directly into .text section and move text base address to the start of .bootpg code. And finally remove +0x1000 value from lot of config options. With this removal custom PHDRS is not used anymore, so remove it too. After this change entry point would be at CONFIG_SPL_TEXT_BASE and not at address -0x1000 anymore. Tested on P2020 board with SPL and proper U-Boot. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-06-28configs: at91: sama5d2_icp: enable QSPI and SF commandSergiu Moga1-0/+13
Add the configurations required for enabling QSPI and the SF command to allow changes to be made dynamically to serial flash devices from the command line interface. Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2022-06-28configs: at91: sam9x60ek: enable QSPI and SF commandSergiu Moga2-0/+26
Add the configurations required for enabling QSPI and the SF command to allow changes to be made dynamically to serial flash devices from the command line interface. Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2022-06-27qemu_arm64: Enable CONFIG_ARMV8_CRYPTO supportWIP/2022-06-27-add-armv8-sha1-sha256-supportTom Rini1-0/+1
Now that we can make use of CPU features for sha1/sha256, enable in QEMU so that we get some test coverage. Cc: Loic Poulain <loic.poulain@linaro.org> Cc: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-27Merge tag 'xilinx-for-v2022.10' of ↵WIP/27Jun2022-nextTom Rini4-0/+8
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2022.10 cpu: - Add driver for microblaze cpu net: - Add support for DM_ETH_PHY to AXI emac and emaclite xilinx: - Switch platforms to DM_ETH_PHY - DT chagnes in ZynqMP and Zynq - Enable support for SquashFS zynqmp: - Add support for KR260 boards - Move BSS from address 0 - Move platform identification from board code to soc driver - Improve zynqmp_psu_init_minimize versal: - Enable loading app at EL1 serial: - Setup default address and clock rates for DEBUG uarts pinctrl: - Add support for tri state and output enable properties relocate-rela: - Clean relocate-rela implementation for ARM64 - Add support for Microblaze microblaze: - Add support for runtime relocation - Rework cache handling (wiring, Kconfig) based on cpuinfo - Remove interrupt support timer: - Extract axi timer driver from Microblaze to generic location
2022-06-27xilinx: Enable support for SquashFSMichal Simek3-0/+3
Enable SquashFS for all xilinx platforms. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/dbe85afda8cd90ebfc537979d382808ff9bec160.1655982259.git.michal.simek@amd.com
2022-06-24microblaze: Enable REMAKE_ELFMichal Simek1-0/+1
Enable u-boot.elf recreation from u-boot.bin to prepare for removing manul relocation. Enable option for big endian configuration but it is not used too much that's why it is completely untested. By supporting this system there is a need to define LITTLE/BIG endian Kconfig options to pass -EL/-EB flags. Full command line for u-boot.elf recreation looks like this: microblazeel-xilinx-linux-gnu-objcopy -I binary -B microblaze \ -O elf32-microblazeel u-boot.bin u-boot-elf.o Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/7e242a519fcd1c693b9103c5599b515af555ca43.1655299267.git.michal.simek@amd.com
2022-06-24xilinx: Add CONFIG_DM_ETH_PHY configT Karthik Reddy4-0/+4
Enable CONFIG_DM_ETH_PHY to utilize shared MDIO bus support on all xilinx platforms. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Acked-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Link: https://lore.kernel.org/r/965981eb324d13a98aad8bd88eb8b50bc5147a7e.1652181968.git.michal.simek@amd.com
2022-06-22configs: ast2600: Move SPL bss section to DRAM spaceChia-Wei Wang1-1/+5
The commit b583348ca8c8 ("image: fit: Align hash output buffers") places the hash output buffer at the .bss section. However, AST2600 by default executes SPL in the NOR flash XIP way. This results in the hash output cannot be written to the buffer as it is located at the R/X only region. We need to move the .bss section out of the SPL body to the DRAM space, where hash output can be written to. This patch includes: - Define the .bss section base and size - A new SPL linker script is added with a separate .bss region specified - Enable CONFIG_SPL_SEPARATE_BSS kconfig option Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> Reviewed-by: Neal Liu <neal_liu@aspeedtech.com>
2022-06-22configs: gxp: add gxp_defconfigNick Hawkins1-0/+60
This is the initial very basic config that enables the U-Boot console on the hpe gxp soc. Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
generated by cgit v1.1 at 2024-09-12 00:10:10 +0000