aboutsummaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2021-06-17Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqWIP/17Jun2021Tom Rini10-2/+427
- fsl-qoriq: Bug fixes related pfe, eth, thermal node, vid.c, cpu release, mmc, usb, env, etc for Layerscape boards - powerpc: Update Maintainers for some boards.
2021-06-17board: freescale: t208xrdb: add a config option for rev D dts fixupsCamelia Groza4-0/+352
Under DM, we rely on u-boot's device tree to provide the correct PHY addresses. The board_fix_fdt callback is intended to be used for device tree fixups before relocation. Unfortunately, this isn't an option when booting from flash since the device tree isn't writable before relocation. This patch introduces the CONFIG_T2080RDB_REV_D option to signal that a board revision D or up is the target. The config option is used to set the correct Aquantia PHY address in the board's u-boot device tree. Defconfig files with the option enable explicitly are added for convenience. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17board/km: add support for expu1 design based on nxpAleksandar Gerasimovski1-0/+70
The EXPU1 design is a new 40G capable ethernet service unit card for Hitachi-Powergrids wired-com product lines. The base SoC is same as for already added SELI8 card, consequently the already added u-boot support for SELI8 is reused. Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> [Fixed new line error at EOF] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17configs: seli8: set envsize to 0x4000Aleksandar Gerasimovski1-1/+1
During the mainlining of the board this was by mistake set to sector size. Our user space env scripts are expecting envsize of 0x4000, and setting this differently will break our cross-platform compatibility. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17configs: ls2088aqds: fix synchronous exceptionBiwen Li1-1/+1
IFC NOR flash base address of ls2088a is 0x580000000, and offset of env crc is 0x500000, so fix the macro CONFIG_ENV_ADDR to fix synchronous exception(access illegal address) Fixes: 59071804c1 ("configs: ls2080a: Correct ENV_ADDR value") Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17configs: ls1088a: Enable CONFIG_SYS_RELOC_ENV_ADDRKuldeep Singh2-0/+2
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-16Merge tag 'u-boot-imx-20210616' of ↵WIP/16Jun2021Tom Rini12-1/+448
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20210616 ------------------- - imxrt : fixes, USB, imxrt1020-evk - imx8m: fix for verdin-imx8mm Add conga-QMX8 board - imx6 : documentation for pico-imx6: Add SeeedStudio NPI-IMX6ULL Support ventana: DM PCI - imx7d: added SMEGW01 board CI : https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/7765
2021-06-16configs: ls1046afrwy: Add secure boot configManish Tomar1-0/+1
Add required CONFIG_NXP_ESBC for ls1046afrwy to enable ESBC Chain of Trust. Signed-off-by: Manish Tomar <manish.tomar@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-11Merge tag 'xilinx-for-v2021.07-rc5' of ↵WIP/11Jun2021Tom Rini1-1/+0
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2021.07-rc5 zynqmp: - Fix ANALOG_BUS value after powerup - Disable EFI_CAPSULE_ON_DISK_EARLY zynqmp-gqspi: - Fix write issue
2021-06-11arm64: zynqmp: Disable EFI_CAPSULE_ON_DISK_EARLYMichal Simek1-1/+0
Sata/scsi and usb based devices are not started at this stage that's why disks are not found and early update can't happen. It is because of deficiency in the UEFI implementation which is not able to deal with block devices which are added or removed after initialization. EFI capsule on disk early feature needs to be fixed first to be able to enable this feature properly. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-10arm: mvebu: turris_mox: enable options for Turris network bootMarek Behún1-0/+8
Enable configuration options to support Turris network boot. This includes FIT support and some crypto commands. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-10arm: mvebu: turris_mox: add support for board rescue modeMarek Behún1-0/+6
Add necessary config options and board code to support board factory reset / rescue mode on Turris MOX. In order to also support invoking rescue mode from U-Boot console, without having to press the factory reset button, put the rescue command into `bootcmd_rescue` default environment variable. When factory reset button is pressed, invoke rescue mode via distroboot by setting `boot_targets` to `rescue`. Rescue boot from console can be invoked by running run bootcmd_rescue Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-09mx7d: Add Storopack's SMEGW01 boardFabio Estevam1-0/+63
Add support for Storopack's SMEGW01 board, which is an IoT gateway based on the i.MX7D SoC. Based on the original U-Boot work done by Phytec. Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-06-09imx8mn: configs: add support for distro boot commandsAndrey Zhizhikin2-0/+2
Supported boot device types in iMX8MN: MMC, DHCP. Add DISTRO_DEFAULTS config option and include the distro boot command header file to enable full support of distro boot on i.MX8M Nano EVK (both DDR and LPDDR derivatives). Drop previous environment, which was targeting customized boot commands and boot order. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-06-09imx: Add SeeedStudio NPI-IMX6ULL SupportNavin Sankar Velliangiri1-0/+80
CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 49C Reset cause: POR Model: Seeed NPi iMX6ULL Dev Board with NAND Board: Seeed NPi i.MX6ULL Dev Board DRAM: 512 MiB NAND: 512 MiB MMC: FSL_SDHC: 0 In: serial@2020000 Out: serial@2020000 Err: serial@2020000 Net: FEC0 Working: - Eth0 - MMC/SD - NAND - UART 1 - USB host Signed-off-by: Navin Sankar Velliangiri <navin@linumiz.com> Note: Changes in v2: * removed unnecessary space in imx6ull-seeed-npi-imx6ull-dev-board.dts file. * Used SZ_2M for CONFIG_SYS_MALLOC_LEN size allocation.
2021-06-09imx: support for conga-QMX8 boardOliver Graute1-0/+86
Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2021-06-09imx: ventana: enable dm support for PCI and FEC ethernetTim Harvey3-0/+15
Enable driver model support for FEC ethernet which allows us to remove the iomux and board_eth_init function. Replace the toggling of the ethernet phy reset with dt configuration. Enable driver model support for PCI which allows us to remove the eth1000_initialize() call. Additionally enable PCI_INIT_R to scan for PCI devices on init such as the e1000 that is present on the GW552x. Convert board_pci_fixup to use dm callback and remove pcidisable env variable which is not supported for DM_PCI and thus leave PCI always enabled during init. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-06-09Add EV-iMX280-NANO-X-MB boardOleh Kravchenko1-0/+91
A simple prototyping board with one microSD port, one Ethernet port, 2 USB ports, I2C, SPI, GPIO, and UART interfaces. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Cc: Stefano Babic <sbabic@denx.de>
2021-06-09Add out4.ru O4-iMX-NANO boardOleh Kravchenko1-0/+103
Board designed for quick prototyping and has one microSD port, 2 Ethernet ports, 2 USB ports, I2C, SPI, CAN, RS-485, GPIO, UART interfaces, and 2 RGB LEDs. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Cc: Stefano Babic <sbabic@denx.de>
2021-06-09configs: imxrt1050-evk: enable host usb support and its commandGiulio Benetti1-1/+6
Now that usb host is supported let's enable it on this board. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09configs: imxrt1050-evk: enable imx gpt timer as tick-timerGiulio Benetti1-0/+1
Let's enable imx-gpt-timer in imx1050-evk defconfig. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09configs: imxrt1020-evk: enable imx gpt timer as tick-timerGiulio Benetti1-0/+1
Let's enable imx-gpt-timer in imx1020-evk defconfig. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-07configs: Resync with savedefconfigTom Rini12-68/+13
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-05pico-imx6ul: disable video after DM_VIDEO conversion deadlineAnatolij Gustschin3-6/+6
These boards were not converted to DM_VIDEO before deadline, so disable video support for now. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Richard Hu <richard.hu@technexion.com> Cc: Fabio Estevam <festevam@gmail.com>
2021-06-05brxre1: disable video after DM_VIDEO conversion deadlineAnatolij Gustschin1-2/+2
The board was not converted to DM_VIDEO before deadline, so disable video support for now. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2021-06-05mx28evk: disable video after DM_VIDEO conversion deadlineAnatolij Gustschin4-12/+12
The board was not converted to DM_VIDEO before deadline, so disable video support for now. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Fabio Estevam <festevam@gmail.com>
2021-06-05siemens: pxm2: disable video after DM_VIDEO conversion deadlineAnatolij Gustschin1-2/+2
The board was not converted to DM_VIDEO before deadline, so disable video support for now. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2021-06-05siemens: rut: disable video after DM_VIDEO conversion deadlineAnatolij Gustschin1-3/+2
The board was not converted to DM_VIDEO before deadline, so disable video support for now. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2021-05-31board: sifive: add HiFive Unmatched board supportGreen Wan1-0/+54
Add defconfig and board support for HiFive Unmatched. Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-05-28configs: stm32mp: Enable UNZIP on STMicroelectronics stm32mp15 boardsPatrick Delaunay2-0/+2
The CMD_UNZIP provides the 'gzwrite' command, which is convenient for writing e.g. gz-compressed images to eMMC from U-Boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-05-28ARM: stm32: Enable UNZIP on DHSOM by defaultMarek Vasut2-0/+2
The CMD_UNZIP provides the 'gzwrite' command, which is convenient for writing e.g. gz-compressed images to eMMC from U-Boot. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-05-27Merge tag 'ti-v2021.07-rc4' of ↵WIP/27May2021Tom Rini1-0/+1
https://source.denx.de/u-boot/custodians/u-boot-ti - Fix reset for AM64 platforms - Enable networking PHY driver for AM64 - Fix default R5F cluster setting in J7
2021-05-27configs: am64x_evm_a53_defconfig: Enable DP83867 PHY driverVignesh Raghavendra1-0/+1
AM64x GP and SK EVM have DP83867 PHY connected to CPSW external port0. Enable the driver in order to use ethernet at U-Boot prompt. CONFIG_PHY_TI is selected by CONFIG_PHY_TI_DP83867 and thus can be dropped. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-25configs: Resync with savedefconfigTom Rini19-23/+16
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-25MIPS: remove deprecated qemu_mips boardDaniel Schwierzeck4-114/+0
Remove qemu_mips boards because DM migration doesn't make sense. The board support for qemu_mips is already marked as deprecated in Qemu in favour of the Malta board. Also qemu_mips support has been removed from Linux a long time ago. The official replacement is the Malta board. The same Malta U-Boot image can be used with Qemu and on physical hardware. All combinations of Big Endian and Little Endian as well as 32 bit and 64 bit are supported. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-05-25mips: octeon: octeon_ebb7304_defconfig: Fix CFI flash setupStefan Roese1-2/+3
This patch makes the necessary adjustments in the defconfig to fully support the CFI flash on the Octeon EBB7304. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-05-24ARM: enable LTO for some boardsMarek Behún14-0/+14
Enable LTO for some boards that were tested by people on U-Boot Mailing List. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Adam Ford <aford173@gmail.com> Tested-by: Pali Rohár <pali@kernel.org> Tested-by: Tim Harvey <tharvey@gateworks.com>
2021-05-20Merge https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini6-0/+10
2021-05-19riscv: ae350: Increase malloc size for binman spl flowRick Chen4-0/+4
It will need larger heap size for u-boot-spl to load u-boot.itb which be generated from binman than USE_SPL_FIT_GENERATOR. Signed-off-by: Rick Chen <rick@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-19riscv: Drop USE_SPL_FIT_GENERATORBin Meng7-7/+0
Now that we have switched to binman to generate u-boot.itb for all RISC-V boards, USE_SPL_FIT_GENERATOR is no longer needed and can be dropped. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-19riscv: ae350: Switch to use binman to generate u-boot.itbBin Meng4-0/+8
Use the new BINMAN_STANDALONE_FDT option for AE350 based SPL defconfigs, so that binman is now used to generate u-boot.itb. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Rick Chen <rick@andestech.com>
2021-05-19riscv: qemu: Switch to use binman to generate u-boot.itbBin Meng2-0/+4
By utilizing the newly introduced BINMAN_STANDALONE_FDT option, along with a new dedicated device tree source file for the QEMU virt target used for binman only, we can now use binman to generate u-boot.itb. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-19riscv: sifive: unleashed: Switch to use binman to generate u-boot.itbBin Meng1-0/+1
At present SiFive Unleashed board uses the Makefile to create the FIT, using USE_SPL_FIT_GENERATOR, which is deprecated as per the Makefile warning. Update to use binman instead. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-19xilinx: zynqmp: Enable DM_RTC/emul driver/cmd date/gettime and efi settimeMichal Simek1-0/+4
Right now U-Boot is not aware about date/time that's why enable it by default also with EFI runtime service for setting time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-19xilinx: versal: Enable CONFIG_POSITION_INDEPENDENTT Karthik Reddy1-0/+1
U-Boot expects to be linked to a specific hard-coded address and to be loaded to and run from that address. CONFIG_POSITION_INDEPENDENT config lifts that restriction & allowing the code to be loaded to and executed from almost any address. As we enabled CONFIG_POSITION_INDEPENDENT, CONFIG_INIT_SP_RELATIVE is enabled by default, where it will set the early stack pointer at runtime by adding an offset value to &_bss_start. The offset value is taken from SYS_INIT_SP_BSS_OFFSET. SYS_INIT_SP_BSS_OFFSET offset should be large enough so that the early malloc region, global data (gd), and early stack should fit. With commit d8fabcc424bd ("arm64: versal: Increase SYS_MALLOC_F_LEN") SYS_MALLOC_F_LEN is increased from 32KB to 1MB, so we need to accommodate this space with SYS_INIT_SP_BSS_OFFSET. Hence increasing SYS_INIT_SP_BSS_OFFSET to 1.5MB. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Acked-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-19arm64: zynqmp: Add description for SOM/Kria boardsMichal Simek1-1/+1
The patch contains several DT files for SOM platform. Carrier card is sck-kv (KV260) revA/B. SMK-K26 is description for starter kit which doesn't have EMMC populated. And SM-K26 is full som with EMMC. Files are divided in this way to make sure that SOM can be plugged to different carrier card and all peripherals on SOM (or defined by a spec) can be used by U-Boot. Full DT for SOM+CC can be merged together as overlays. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-16arm: octeontx2: Add Octeon TX2 CN913x DB supportKonstantin Porotchkin1-0/+89
This patch adds the base support for the Marvell Octeon TX2 CN913x DB. Only one defconfig is added with this patch. Other board variants are available (NAND, MMC booting) and images for these boards can be generated by following the documentation added in the included README. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-05-16mvebu: x530: Reduce SPL image sizeStefan Roese1-1/+1
Currently, building U-Boot for x530 fails since the SPL image is too big. This patch reduces the SPL size by changing the following Kconfig options: Enable CONFIG_SPL_TINY_MEMSET Disable CONFIG_SPI_FLASH_BAR By disabling CONFIG_SPI_FLASH_BAR, the tiny SPI NOR framework can be used. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Pratyush Yadav <p.yadav@ti.com> Cc: Tom Rini <trini@konsulko.com> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Pratyush Yadav <p.yadav@ti.com>
2021-05-15configs: Resync with savedefconfigTom Rini10-32/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-14riscv: Enable AI ram on K210Sean Anderson1-0/+2
We just need to initialize all the clocks pre-reloc. The clock driver creates a bunch of devices, so we need to increase the pre-reloc malloc arena. Signed-off-by: Sean Anderson <seanga2@gmail.com>
generated by cgit v1.1 at 2024-10-12 08:00:17 +0000