aboutsummaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2022-06-14imx: kontron-sl-mx8mm: enable DM_SERIALPeng Fan1-0/+1
Enable CONFIG_DM_SERIAL. uart and its pinmux was already marked with u-boot,dm-spl. Move preloader_console_init after spl_init to make sure driver model work. Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@denx.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-06-14imx: imx8mn_var_som: enable DM_SERIALPeng Fan1-0/+1
Enable CONFIG_DM_SERIAL. uart and its pinmux was already marked with u-boot,dm-spl. Move preloader_console_init after spl_init to make sure driver model work. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-06-14imx: imx8m[m/p]_phycore: Enable DM_SERIALPeng Fan2-0/+2
Enable CONFIG_DM_SERIAL. uart and its pinmux was already marked with u-boot,dm-spl. Move preloader_console_init after spl_early_init to make sure driver model work. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Teresa Remmet <t.remmet@phytec.de> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-06-14imx: imx8mm_icore: Enable SPL_DM_SERIALPeng Fan2-2/+0
Enable CONFIG_SPL_DM_SERIAL. uart2 and its pinmux was already marked with u-boot,dm-spl. Move preloader_console_init after spl_early_init to make sure driver model work. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-06-14imx: imx8mm-cl-iot-gate: Enable DM_SERIALPeng Fan2-0/+2
Enable CONFIG_DM_SERIAL. uart3 and its pinmux was already marked with u-boot,dm-spl. Move preloader_console_init after spl_early_init to make sure driver model work. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-06-14imx: imx8m[m/n]_beacon: Enable SPL_DM_SERIALPeng Fan3-3/+0
Enable CONFIG_SPL_DM_SERIAL. uart2 and its pinmux was already marked with u-boot,dm-spl. Move preloader_console_init after spl_init to make sure driver model work. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Adam Ford <aford173@gmail.com> #imx8mm_beacon Reviewed-by: Fabio Estevam <festevam@denx.de> Tested-by: Adam Ford <aford173@gmail.com> #imx8mn_beacon
2022-06-10configs: Add configs for AM62x SKVignesh Raghavendra2-0/+174
Add am62x_evm_r5_defconfig for R5 SPL and am62x_evm_a53_defconfig for A53 SPL and U-Boot support. To keep the changes to minimum. Only UART And SD boot related configs are included. This should serve as good starting point for new board bringup with AM62x. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> [trini: Migrate a number of CONFIG symbols, have re-tested] Tested-by: Georgi Vlaev <g-vlaev@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-10configs: am65_evm_r5_usb*_defconfig: Sync the checks for size of image and ↵Aswath Govindraju2-0/+10
stack from generic r5 defconfig Sync the configs required for enabling checks for size of image and stack from generic r5 defconfig file. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2022-06-10ARM: omap3: evm: Fix 'fitImage' bootingDerald D. Woods1-2/+5
This commit sets two additional variables in the default BOOTCOMMAND. Adding 'boot=mmc' and 'addr_fit=0x8b000000' removes the need for a special 'uEnv.txt' to be created. The 'addr_fit' variable is the key piece here. It is normally defined as 0x90000000, in the macro DEFAULT_FIT_TI_ARGS. For this OMAP34XX board, 0x8b000000 works without touching other varibles. This was tested with a 'fitImage' created using the following FIT source: ---------------------------------------------------------------------- /dts-v1/; / { description = "Simple image with single Linux kernel and FDT blob"; #address-cells = <1>; images { kernel { description = "Linux kernel: omap2plus"; data = /incbin/("./zImage"); type = "kernel"; arch = "arm"; os = "linux"; compression = "none"; load = <0x80008000>; entry = <0x80008000>; hash-1 { algo = "sha256"; }; }; fdt-omap3-evm.dtb { description = "FDT: omap3-evm.dtb"; data = /incbin/("./omap3-evm.dtb"); type = "flat_dt"; arch = "arm"; compression = "none"; load = <0x8ff00000>; hash-1 { algo = "sha256"; }; }; }; configurations { default = "conf-omap3-evm.dtb"; conf-omap3-evm.dtb { description = "Boot Linux kernel with FDT blob"; kernel = "kernel"; fdt = "fdt-omap3-evm.dtb"; }; }; }; ---------------------------------------------------------------------- Additionally, the default environment is now stored in "uboot.env" on the FAT partition of MMC '0'. Fixes: 11e2ab3f0b ("ARM: omap3: evm: Enable booting 'fitImage' with DEFAULT_FIT_TI_ARGS") Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2022-06-10ARM: omap3: evm: Complete DM_I2C migrationDerald D. Woods1-2/+2
This commits enables DM_I2C and sets the default bus to 0. Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2022-06-10arm: bcmbca: introduce the bcmbca architecture and 47622 SOCWilliam Zhang1-0/+21
This is the initial support for Broadcom's ARM-based 47622 SOC. In this change, our first SOC is an armv7 platform called 47622. The initial support includes a bare-bone implementation and dts with ARM PL011 uart. The SOC-specific code resides in arch/arm/mach-bcmbca/<soc> and board related code is in board/broadcom/bcmba. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Kursad Oney <kursad.oney@broadcom.com> Signed-off-by: Anand Gore <anand.gore@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-06-10configs: j721e_evm_defconfig: Add HBMC related configsVaishnav Achath3-0/+23
Enable HBMC and HyperFlash in R5SPL, A72 SPL and A72 U-Boot Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> [trini: Update j721e_hs_evm_a72 as well] Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-08test: Load mac address with i2c eepromSean Anderson1-0/+1
This uses an i2c eeprom to load a mac address using the nvmem interface. Enable I2C_EEPROM for sandbox SPL since it is the only sandbox config which doesn't enable it eeprom. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-08sandbox: Enable NVMEMSean Anderson5-0/+6
This enables NVMEM for all sandbox defconfigs, enabling it to be used in unit tests in the next few commits. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-06fdtdec: drop needlessly convoluted CONFIG_PHANDLE_CHECK_SEQRasmus Villemoes4-4/+0
Asking if the alias we found actually points at the device tree node we passed in (in the guise of its offset from blob) can be done simply by asking if the fdt_path_offset() of the alias' path is identical to offset. In fact, the current method suffers from the possibility of false negatives: dtc does not necessarily emit a phandle property for a node just because it is referenced in /aliases; it only emits a phandle property for a node if it is referenced in <angle brackets> somewhere. So if both the node we passed in and the alias node we're considering don't have phandles, fdt_get_phandle() returns 0 for both. Since the proper check is so simple, there's no reason to hide that behind a config option (and if one really wanted that, it should be called something else because there's no need to involve phandle in the check). Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by: Aswath Govindraju <a-govindraju@ti.com>
2022-06-06configs: Resync with savedefconfigWIP/06Jun2022-nextTom Rini71-92/+24
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06riotboard, syzygy_hub: Disable SPL_FALCON_BOOT_MMCSDTom Rini2-4/+0
Looking at the git history and values used for the raw kernel/args location, it's clear these platforms only ever did Falcon Mode via filesystem images and not raw MMC/SD locations. Disable CONFIG_SPL_FALCON_BOOT_MMCSD. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR et al to KconfigTom Rini34-0/+68
This converts the following to Kconfig: CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_NAND_SPL_KERNEL_OFFS to KconfigTom Rini15-0/+15
This converts the following to Kconfig: CONFIG_SYS_NAND_SPL_KERNEL_OFFS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_SPL_ARGS_ADDR to KconfigTom Rini31-1/+30
This converts the following to Kconfig: CONFIG_SYS_SPL_ARGS_ADDR In doing so, we also consistently use this variable for SPL_OS_BOOT and not CONFIG_SYS_FDT_BASE in some cases. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_TARGET to KconfigTom Rini52-0/+52
This converts the following to Kconfig: CONFIG_SPL_TARGET Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_GD_ADDR to KconfigTom Rini43-0/+43
This converts the following to Kconfig: CONFIG_SPL_GD_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to KconfigTom Rini290-0/+706
This converts the following to Kconfig: CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_SPL_MALLOC_START We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to control if we have a malloc pool or not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_BSS_START_ADDR to KconfigTom Rini236-0/+440
This converts the following to Kconfig: CONFIG_SPL_BSS_START_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_RELOC_TEXT_BASE et al to KconfigTom Rini52-9/+207
This converts the following to Kconfig: CONFIG_SPL_RELOC_TEXT_BASE CONFIG_SPL_RELOC_STACK CONFIG_SPL_RELOC_MALLOC_ADDR CONFIG_SPL_RELOC_MALLOC_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06imx7: Update CONFIG_SPL_STACK defaults in KconfigTom Rini8-16/+0
Update the Kconfig entry to have the correct defaults for i.MX7 platforms, and move the existing large comment from imx7_spl.h to doc/imx/common/imx7.txt so that it's not lost. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06imx6: Update CONFIG_SPL_STACK defaults in KconfigTom Rini54-108/+0
Update the Kconfig entry to have the correct defaults for i.MX6 platforms, and move the existing large comment from imx6_spl.h to doc/imx/common/imx6.txt so that it's not lost. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_STACK to KconfigTom Rini486-0/+812
This converts the following to Kconfig: CONFIG_SPL_STACK Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.hTom Rini539-0/+1076
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_COMMON_INIT_DDR to KconfigTom Rini36-0/+45
This converts the following to Kconfig: CONFIG_SPL_COMMON_INIT_DDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06ppc / layerscape: Clean up CONFIG_SYS_CCSR_DO_NOT_RELOCATE usageTom Rini52-0/+52
A number of PowerPC platforms define this, for SPL. To move this to Kconfig, it needs to be CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE, so use CONFIG_IS_ENABLED() to check for usage. A number of layerscape platforms bring this logic from PowerPC, but only need a small part of it, for the fman driver. Remove their unused portion at least. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_SYS_MALLOC_SIMPLE to KconfigTom Rini10-0/+10
This converts the following to Kconfig: CONFIG_SPL_SYS_MALLOC_SIMPLE The problem here is that a few platforms have been doing: #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_MALLOC_SIMPLE #endif instead of defining CONFIG_SPL_SYS_MALLOC_SIMPLE directly. Correct this and update the documentation in a few places to match usage. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_BSS_MAX_SIZE et al to KconfigTom Rini325-0/+367
This converts the following to Kconfig: CONFIG_SPL_BSS_MAX_SIZE CONFIG_SPL_MAX_FOOTPRINT Note that the da850evm platforms were violating the "only use one" rule here, and so now hard-code their BSS limit. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_PAD_TO et al to KconfigTom Rini390-6/+513
This converts the following to Kconfig: CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE CONFIG_TPL_PAD_TO CONFIG_TPL_MAX_SIZE Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the existing places. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_FS_LOAD_PAYLOAD_NAME et al to KconfigTom Rini39-0/+43
This converts the following to Kconfig: CONFIG_SPL_FS_LOAD_ARGS_NAME CONFIG_SPL_FS_LOAD_KERNEL_NAME CONFIG_SPL_FS_LOAD_PAYLOAD_NAME Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_NAND_RAW_ONLY et al to KconfigTom Rini6-0/+11
This converts the following to Kconfig: CONFIG_SPL_NAND_RAW_ONLY CONFIG_SPL_NAND_SOFTECC Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_INIT_MINIMAL et al to KconfigTom Rini52-0/+77
This converts the following to Kconfig: CONFIG_SPL_INIT_MINIMAL CONFIG_SPL_FLUSH_IMAGE CONFIG_SPL_SKIP_RELOCATE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_CFI_FLASH_STATUS_POLL to KconfigTom Rini9-0/+9
This converts the following to Kconfig: CONFIG_SYS_CFI_FLASH_STATUS_POLL Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_FLASH_CFI_WIDTH to KconfigTom Rini34-0/+34
This converts the following to Kconfig: CONFIG_SYS_FLASH_CFI_WIDTH Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_BOOTPARAMS_LEN to KconfigTom Rini56-0/+57
This converts the following to Kconfig: CONFIG_SYS_BOOTPARAMS_LEN Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_BARGSIZE to KconfigTom Rini5-0/+5
This converts the following to Kconfig: CONFIG_SYS_BARGSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_CBSIZE to KconfigTom Rini333-0/+333
This converts the following to Kconfig: CONFIG_SYS_CBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_PBSIZE to KconfigTom Rini976-0/+977
This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_MAXARGS to KconfigTom Rini558-0/+558
This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06configs: fsl: add missing SYS_FMAN_FW_ADDR definesCamelia Groza2-0/+2
Two defconfigs were missed when transitioning the SYS_FMAN_FW_ADDR symbol to Kconfig. CONFIG_SYS_FMAN_FW_ADDR is currently initialized to 0 by default on these builds, which prevents the firmware from loading. Add the correct symbols to these defconfigs. Fixes: a97a071d10d2b ("configs: fsl: migrate FMAN/QE specific defines to Kconfig") Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
2022-06-03imx: imx8mq: select CONFIG_CMD_CLKPeng Fan1-0/+1
select CONFIG_CMD_CLK to enable dump clk in uboot shell Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-05-27Merge https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini4-0/+4
2022-05-26riscv: ae350: Fix OF_BOARD boot failureRick Chen4-0/+4
Disable BINMAN_FDT for ae350 boards which don't actually use it. Fixes: 836eac7c6fe3 ("fdt: Make OF_BOARD a bool option") Signed-off-by: Rick Chen <rick@andestech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-05-25Merge tag 'xilinx-for-v2022.07-rc4' of ↵WIP/25May2022Tom Rini4-4/+0
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2022.07-rc4 zynqmp: - Fix DP PLL configuration for zcu102/zcu106 and SOM - Fix split mode for starting R5s - DT fixes - Remove firmware node for mini configurations - Wire TEE for multi DTB fit image xilinx: - Handle board_get_usable_ram_top(0) properly phy: - Extend psgtr timeout mmc: - Fix mini configuration which misses zynqmp_pm_is_function_supported()
2022-05-24Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiWIP/24May2022Tom Rini2-2/+1
The bulk of it is (finally!) some DT sync from the kernel. We refrained from syncing one incompatible change, as this would spoil booting Linux kernels before v5.13 with U-Boot's DT (via UEFI, for instance). I test booted Linux v5.18 and v5.4 with that new DT on some boards, and the headless peripherals (MMC, USB, Ethernet) seemed to work. The rest are fixes: - silencing missing clock warnings due to the new pinctrl driver - fixing "UART0 on PortF", allowing UART access through the SD card pins - add an F1C100s clock driver, to enable MMC support (SPI comes later) - some cleanups for CONS_INDEX_n in Kconfig Tested on BananaPi-M1, Pine64-LTS, Pine-H64, X96-Mate (H616) and OrangePi-Zero.
generated by cgit v1.1 at 2024-07-15 08:51:48 +0000