aboutsummaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2019-04-19usb: Select USB_MUSB_DSPS with USB_MUSB_TIAlex Kiernan8-8/+0
USB_MUSB_TI requires USB_MUSB_DSPS, failing at link time if it's not selected: drivers/usb/musb-new/built-in.o: In function `ti_musb_host_ofdata_to_platdata': drivers/usb/musb-new/ti-musb.c:193: undefined reference to `musb_dsps_ops' or if OF_CONTROL is not selected: arch/arm/mach-omap2/built-in.o:(.data.usb0+0x24): undefined reference to `musb_dsps_ops' Reviewed-by: Hannes Schmelzer <oe5hpm@oevsv.at> Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at> Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2019-04-18Merge tag 'arc-for-2019.07' of git://git.denx.de/u-boot-arcTom Rini2-0/+4
In this small series we migrate ARC boards to DM_MMC so we're hopefully are good now and our boards will be kept in U-Boot for some more time :)
2019-04-18ARC: [plat-axs10x]: migrate to DM_MMCEugeniy Paltsev1-0/+2
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-04-18ARC: [plat-hsdk]: migrate to DM_MMCEugeniy Paltsev1-0/+2
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-04-17arm: am57xx: cl-som-am57x: remove board supportUri Mashiach1-64/+0
U-Boot support for the CL-SOM-AM57x module is no longer required. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2019-04-17Merge tag 'xilinx-for-v2019.07' of git://git.denx.de/u-boot-microblazeTom Rini2-2/+2
Xilinx/FPGA changes for v2019.07 fpga: - Add support for external data in FIT - Extend testing for external data case - Inform user about a need to run post config on Zynq arm: - Tune zynq command functions - Fix internal variable setting arm64: - Add support for zc39dr decoding - Disable WDT for zcu100 - Small changes in reset_reason() - Some DT changes (spi) - Tune qspi-mini configuration - Remove useless eeprom setting - Fix two sdhci boot case spi: - Fix tap delay programming clk: - Enable i2c in SPL net: - Fix gem phydev handling - Remove phy detection code from gem driver general: - Correct EXT_DTB usage for MULTI_DTB_FIT configuration
2019-04-17Merge tag 'uniphier-v2019.07' of git://git.denx.de/u-boot-uniphierTom Rini1-0/+1
UniPhier SoC updates for v2019.07 - Sync DT with Linux 5.1-rc4 - Enable CONFIG_SUPPORT_EMMC_RPMB for uniphier_v8_defconfig
2019-04-17ARM: uniphier_v8: enable CONFIG_SUPPORT_EMMC_RPMBMasahiro Yamada1-0/+1
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-16arm64: xilinx: zynqmp: Remove unneeded configsSiva Durga Prasad Paladugu1-0/+2
Remove unneeded configs from mini qspi configuration so that it saves space for this mini configuration. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16arm64: zynqmp: Disable WDT for zcu100Michal Simek1-2/+0
Do not enable WDT by default on this target because distributions are not enabling watchdog driver to service it. Feature has been enabled by: "arm64: zynqmp: Enable cadence WDT for zcu100" (sha1: 767afebbcda59f3ccb04f6c94de8cab2fb7905b6) And WDT is still enabled in rebranded Avnet Ultra 96 board support. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-15Merge tag 'u-boot-imx-20190415' of git://git.denx.de/u-boot-imxTom Rini44-242/+237
Move to DM ----------- - DM support in sata - Toradex Board to DM - wandboard to DM - tbs2910 to DM - GE boards to DM - VHybrid boards to DM - DM_VIDEO for i.MX
2019-04-14board: tbs2910: Remove CMD_FDT support in defconfig to reduce u-boot sizeSoeren Moch1-0/+1
This fixes the build failure "u-boot.imx exceeds file size limit". Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-14Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini7-28/+0
Conflicts: arch/arm/dts/armada-385-amc.dts arch/arm/dts/armada-xp-theadorable.dts arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-13imx6: wandboard: fix dwc_ahsata build errors when DM enabledAnatolij Gustschin1-1/+2
Enable CONFIG_AHCI to fix errors: drivers/ata/dwc_ahsata.c: In function `ahci_init_one': drivers/ata/dwc_ahsata.c:868:21: error: `struct blk_desc' has no member named `priv' sata_dev_desc[pdev].priv = uc_priv; ^ drivers/ata/dwc_ahsata.c: In function `init_sata': drivers/ata/dwc_ahsata.c:891:30: error: `struct blk_desc' has no member named `priv' uc_priv = sata_dev_desc[dev].priv; ... Also enable DM_SCSI to fix migration build warning. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13config: colibri_vf: enable mtd partitions via dtStefan Agner1-0/+1
Use device tree to set MTD partitions of the NAND chip. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13colibri_vf: migrate fec, esdhc, nfc and usb to driver modelMarcel Ziswiler1-0/+5
Migrate FEC, ESDHC, NFC and USB to driver model. While at it also do no longer enable optional I2C clock in board file as the generic clock code now handles this. Note for space reason and as it is not required just for booting we do not enable I2C in U-Boot by default. While at it also update copyright period. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13colibri_vf: migrate pinctrl and regulators to dtb/dmMarcel Ziswiler1-0/+5
Migrate pinctrl and regulators to device tree resp. driver model: DDR, DSPI, ENET, ESDHC, I2C, NFC and UART. Enable CMD_DM, PINCTRL and DM_REGULATOR. While at it also update copyright period and sort include files. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13configs: colibri_vf: disable obscure optionsMarcel Ziswiler1-1/+9
Disable more obscure options to save another 26 KB in preparation of the upcoming driver model migration. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13configs: move CONFIG_MXC_OCOTP to KconfigMarcel Ziswiler2-2/+0
While commit 3e020f03e94f ("driver: misc: add MXC_OCOTP Kconfig entry") introduced a Kconfig entry it did not actually migrate all configurations to using it. As CONFIG_MXC_OCOTP was in mx{6/7}_common.h enable it by default on those architectures. Additionally, also enable it on ARCH_IMX8M and ARCH_VF610 where all current members enabled it through their legacy configuration header files. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-13configs: colibri_vf: limit size of malloc() pool before relocationMarcel Ziswiler1-0/+1
Limit the size of the malloc() pool before relocation (SYS_MALLOC_F_LEN). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13imx6: wandboard: convert to DM_MMCAnatolij Gustschin1-0/+1
Move SDHC init to SPL code since it is not required with DM_MMC. Enable DM_MMC support. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13imx6: wandboard: convert to DM_I2CAnatolij Gustschin1-0/+5
Allow building with DM_I2C enabled. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13imx6: wandboard: convert to DM_PMICAnatolij Gustschin1-0/+2
Enable DM_PMIC_PFUZE100 driver and add PMIC description to DTS. Rework power_init_board() code. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13imx6: wandboard: convert to DM_VIDEOAnatolij Gustschin1-1/+1
Enable DM_VIDEO in defconfig. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13imx6: wandboard: convert to DM_USBAnatolij Gustschin1-0/+1
Drop CONFIG_USB_MAX_CONTROLLER_COUNT and enable DM_USB in defconfig. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13imx6: wandboard: convert to DM_GPIO and enable pinctrl driverAnatolij Gustschin1-0/+3
Enable DM_GPIO and pinctrl in defconfig and add gpio_request() calls where required. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13imx6: wandboard: add device treeAnatolij Gustschin1-1/+2
Add device trees from Linux in preparation for driver model conversions. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13mx6sabreauto: convert to DM_VIDEOAnatolij Gustschin1-1/+1
Enable DM_VIDEO in defconfig. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13mx6sabresd: convert to DM_VIDEOAnatolij Gustschin1-1/+1
Enable DM_VIDEO in defconfig. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13colibri_imx6: convert to DM_VIDEOAnatolij Gustschin1-1/+1
Enable DM_VIDEO in defconfig. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13imx6: ge_bx50v3: convert to DM_VIDEOAnatolij Gustschin1-1/+1
Enable DM_VIDEO in defconfig. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13imx6: icore: convert to DM_VIDEOAnatolij Gustschin4-4/+4
Enable DM_VIDEO in defconfigs. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13apalis_imx6: convert to DM_VIDEOAnatolij Gustschin1-1/+2
Enable DM_VIDEO in defconfig. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13imx: move CONFIG_VIDEO_IPUV3 to defconfigsAnatolij Gustschin34-0/+35
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13board: tbs2910: Convert mmc to driver modelSoeren Moch1-0/+1
So we don't need to duplicate settings from the device tree in the board file. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13board: tbs2910: Convert sata to ahci driver modelSoeren Moch1-0/+1
While at it, also configure 64-bit LBA support. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13ata: dwc_ahsata: Add ahci driver model supportSoeren Moch1-0/+1
Disable this support for cm_fx6 to avoid breakage. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13board: tbs2910: Convert i2c and rtc to driver modelSoeren Moch1-1/+5
So we don't need to duplicate settings from the device tree in the board file. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13board: tbs2910: Convert usb to driver modelSoeren Moch1-0/+2
So we don't need to duplicate settings from the device tree in the board file. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13board: tbs2910: Add pinctrl driver and convert gpio to driver modelSoeren Moch1-0/+3
We need this for additional driver model conversions. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13board: tbs2910: Add device treeSoeren Moch1-1/+3
... as preparation for additional driver model coonversions. We use CONFIG_OF_EMBED here to keep u-boot.imx as final binary name. So we maintain compatibility with the original TBS u-boot and available HOWTOs for u-boot updates. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13board: tbs2910: Remove efi loader support in defconfig to reduce u-boot sizeSoeren Moch1-0/+1
Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13colibri_imx6: migrate usb to using driver modelMarcel Ziswiler1-0/+1
Migrate USB to using driver model. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri_imx6: migrate mmc to using driver modelMarcel Ziswiler1-0/+1
Migrate MMC to using driver model. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri_imx6: migrate pmic and regulator to using driver modelMarcel Ziswiler1-0/+7
Migrate PMIC and regulator to using driver model. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri_imx6: migrate i2c to using driver modelMarcel Ziswiler1-0/+1
Migrate I2C to using driver model. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri_imx6: enable pin control driverMarcel Ziswiler1-0/+2
Enable pin control driver as required for further driver model migration. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri_imx6: clean-up and migrate gpios to using driver modelMarcel Ziswiler1-0/+1
Migrate GPIOs to using driver model, properly request backlight, MMC/SD card detect and USB power enable GPIOs and also enable SION bit in pin muxing for auxiliary, backlight and USB power enable GPIOs. While at it also update copyright year, clean-up/re-order includes, add some comments clarifying ifdef scope and do some white-space clean-up. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri_imx6: migrate to using device treeMarcel Ziswiler1-1/+2
Migrate to using device tree required for further driver model integration. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri_imx6: enable fit image, gpt, imx thermal, efi loader supportMarcel Ziswiler1-1/+3
Enbale FIT image, GPT command, i.MX thermal and EFI loader support. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
generated by cgit v1.1 at 2024-08-12 17:28:26 +0000