aboutsummaryrefslogtreecommitdiff
path: root/configs/iot2050_defconfig
AgeCommit message (Collapse)AuthorFilesLines
2023-09-28configs: iot2050: Disable CONFIG_CONSOLE_MUXWIP/2023-09-28-assorted-minor-fixesJan Kiszka1-2/+1
We only have serial as console option, and leaving this on turns on SYS_CONSOLE_IS_IN_ENV which is also not true for these devices, leaving an ugly In: No input devices available! Out: No output devices available! Err: No error devices available! behind. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-07-28configs: iot2050: Enabled keyed autobootJan Kiszka1-0/+4
Only accept SPACE to stop autobooting. This is safer to avoid accidental interruptions on unattended devices. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-07-28boards: siemens: iot2050: Unify PG1 and PG2/M.2 configurations againJan Kiszka1-0/+150
This avoids having to maintain to defconfigs that are 99% equivalent. The approach is to use binman to generate two flash images, flash-pg1.bin and flash-pg2.bin. With the help of a template dtsi, we can avoid duplicating the common binman image definitions. Suggested-by: Andrew Davis <afd@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-03-29board: siemens: iot2050: Split the build for PG1 and PG2Su Baocheng1-145/+0
Due to different signature keys, the PG1 and the PG2 boards can no longer use the same FSBL (tiboot3). This makes it impossible anyway to maintaine a single flash.bin for both variants, so we can also split the build. A new target is added to indicates the build is for PG1 vs. PG2 boards. Hence now the variants have separated defconfig files. The runtime board_is_sr1() check does make no sense anymore, so remove it and replace with build time check. Documentation is updated accordingly. New binary artifacts are already available via meta-iot2050. Signed-off-by: Su Baocheng <baocheng.su@siemens.com> [Jan: refactor config option into targets, tweak some wordings] Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-03-27configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-02-17configs: Resync with savedefconfigTom Rini1-4/+3
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-10-21configs: Resync with savedefconfigWIP/2022-10-21-enforce-some-DM-migrationsTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-23configs: Resync with savedefconfigTom Rini1-2/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-25arm: mach-k3: Rename SOC_K3_AM6 to SOC_K3_AM654Andrew Davis1-1/+1
The first AM6x device was the AM654x, but being the first we named it just AM6, since more devices have come out with this same prefix we should switch it to the normal convention of using the full name of the first compatibility device the series. This makes what device we are talking about more clear and matches all the K3 devices added since. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to KconfigTom Rini1-0/+2
This converts the following to Kconfig: CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_SPL_MALLOC_START We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to control if we have a malloc pool or not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_BSS_START_ADDR to KconfigTom Rini1-0/+2
This converts the following to Kconfig: CONFIG_SPL_BSS_START_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.hTom Rini1-0/+2
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_BSS_MAX_SIZE et al to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SPL_BSS_MAX_SIZE CONFIG_SPL_MAX_FOOTPRINT Note that the da850evm platforms were violating the "only use one" rule here, and so now hard-code their BSS limit. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_PAD_TO et al to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE CONFIG_TPL_PAD_TO CONFIG_TPL_MAX_SIZE Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the existing places. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_PBSIZE to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_MAXARGS to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-22configs: Resync with savedefconfigTom Rini1-1/+0
Resync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-04configs: iot2050: Drop unused CONFIG_OF_LIST from defconfigJan Kiszka1-1/+0
DTBs are explicitly listed in the image source file for this board, and this list already became outdated. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2021-11-11boards: siemens: iot2050: Re-enable bootstage reportingJan Kiszka1-0/+2
This got lost while fixing up the condition in board/siemens/iot2050/board.c Fixes: b55881dd ("bootstage: Add SPL support") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-11-01configs: Resync with savedefconfigWIP/01Nov2021Tom Rini1-2/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-11board: siemens: iot2050: Adjust to changes in DT and configurationJan Kiszka1-2/+4
Account for the changes done between merge proposal and the final merge. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-10-03iot2050: Enable watchdog support, but do not auto-start itJan Kiszka1-0/+6
This allows to use the watchdog in custom scripts but does not enforce that the OS has to support it as well. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2021-10-03board: siemens: Add support for SIMATIC IOT2050 devicesJan Kiszka1-0/+130
This adds support for the IOT2050 Basic and Advanced devices. The Basic used the dual-core AM6528 GP processor, the Advanced one the AM6548 HS quad-core version. Both variants are booted via a Siemens-provided FSBL that runs on the R5 cores. Consequently, U-Boot support is targeting the A53 cores. U-Boot SPL, ATF and TEE have to reside in SPI flash. Full integration into a bootable image can be found on https://github.com/siemens/meta-iot2050 Based on original board support by Le Jin, Gao Nian and Chao Zeng. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
generated by cgit v1.1 at 2024-08-11 05:43:30 +0000