aboutsummaryrefslogtreecommitdiff
path: root/configs/imx8mn_venice_defconfig
AgeCommit message (Collapse)AuthorFilesLines
2022-09-19imx8m*_venice_defconfig: fix default bootcmdTim Harvey1-1/+0
commit 970bf8603b87 ("Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig") had an unintended side effect of resulting in a bootcmd env var change for boards like venice that did not have CONFIG_USE_BOOTCOMMAND defined and relied on it being defaulted in include/config_distro_bootcmd.h. Following that patch it instead got defaulted in tools/env/fw_env_private.h Fix this by enabling CONFIG_USE_BOOTCOMMAND for venice. Fixes: commit 970bf8603b87 ("Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig") Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-08-23configs: Resync with savedefconfigTom Rini1-2/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07Convert CONFIG_SYS_BOOTM_LEN to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_BOOTM_LEN As part of this, rework error handling in boot/bootm.c so that we pass the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not be available to host tools but we do know the size that we passed to malloc(). Cc: Soeren Moch <smoch@web.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to KconfigTom Rini1-0/+4
This converts the following to Kconfig: CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_SPL_MALLOC_START We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to control if we have a malloc pool or not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_BSS_START_ADDR to KconfigTom Rini1-0/+2
This converts the following to Kconfig: CONFIG_SPL_BSS_START_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_STACK to KconfigTom Rini1-0/+2
This converts the following to Kconfig: CONFIG_SPL_STACK Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_BSS_MAX_SIZE et al to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SPL_BSS_MAX_SIZE CONFIG_SPL_MAX_FOOTPRINT Note that the da850evm platforms were violating the "only use one" rule here, and so now hard-code their BSS limit. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_PAD_TO et al to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE CONFIG_TPL_PAD_TO CONFIG_TPL_MAX_SIZE Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the existing places. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_CBSIZE to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_CBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_PBSIZE to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_MAXARGS to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-20board: gateworks: venice: enable SPL_DM_SERIALTim Harvey1-1/+0
The uart2 and its pinmux are already marked with u-boot,dm-spl but we need to move the call to preloader_console_init() after spl_early_init() to avoid a board hang as dm can't be used until after spl_early_init() due to the uart driver not enabling the uart clock. Remove the manual config of the UART pinmux now that it is no longer needed. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-22configs: Resync with savedefconfigTom Rini1-1/+0
Resync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-21imx8m{m, n}_venice_defconfig: enable md5sum and crc32 commandsTim Harvey1-1/+3
Enable the md5sum and crc32 commands. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21imx8m{m,n}_venice_defconfig: add DT overlay supportTim Harvey1-0/+1
enable CONFIG_OF_LIBFDT_OVERLAY to support applying dt overlays in U-Boot. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21arm: dts: imx8m*-venice: add gpio hog supportTim Harvey1-0/+1
Add gpio hog support for board-specific gpio lines: - put hogs in u-boot.dtsi so as to keep the regular dts files in sync with the kernel. The hogs will not be put in the kernel as that makes them un-usable by userspace as well as re-initializes them to dt defaults overriding changes which may have been done by bootloader commands. - specify gpio names and initial config - enable GPIO_HOG Signed-off-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2022-04-21board: gateworks: venice: use common GSC driverTim Harvey1-0/+1
Use the common GSC driver. This allows us to do some additional cleanup: - rename gsc{.c,.h} to eeprom{.c.h} for clarity - collapse eeprom_get_dev - remove unnecessary header files and alphabatize includes Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21board: gateworks: venice: enable DM_SERIALTim Harvey1-0/+2
Enable DM_SERIAL. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21configs: imx8m{m,n}_venice_defconfig: add usb supportTim Harvey1-0/+20
Enable USB support for host controller and various USB ethernet devices. Example usage of USB Mass Storage (UMS) support: u-boot=> mmc list FSL_SDHC: 0 FSL_SDHC: 1 FSL_SDHC: 2 (eMMC) u-boot=> ums 0 mmc 2 UMS: LUN 0, dev mmc 2, hwpart 0, sector 0x0, count 0xe30000 Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21imx8m{m,n}_venice: update env memory layoutTim Harvey1-1/+1
Update distro config env memory layout: - loadaddr=0x48200000 allows for 130MB area for uncompressing (ie FIT images, kernel_comp_addr_r) - fdt_addr_r = loadaddr + 128MB - allows for 128MB kernel - scriptaddr = fdt_addr_r + 512KB - allows for 512KB fdt - ramdisk_addr_r = scriptaddr + 512KB - allows for 512KB script Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-08configs: Resync with savedefconfigTom Rini1-2/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01configs: Resync with savedefconfigTom Rini1-2/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18configs: Resync with savedefconfigTom Rini1-2/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_ETHPRIME to KconfigTom Rini1-0/+2
This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-19board: gateworks: venice: add imx8mn-gw7902 supportTim Harvey1-0/+116
The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring: - LPDDR4 DRAM - eMMC FLASH - Gateworks System Controller - LTE CAT M1 modem - USB 2.0 HUB - M.2 Socket with USB2.0, PCIe, and dual-SIM - IMX8M FEC - PCIe based GbE - RS232/RS485/RS422 serial transceiver - GPS - CAN bus - WiFi / Bluetooth - MIPI header (DSI/CSI/GPIO/PWM/I2S) - PMIC To add support for the i.MX8M Nano GW7902: - Add imx8mn-venice dts/defconfig/include - Add imx8mn-gw7902 dts - Add imx8mn-2gb lpddr4 dram configs - Add misc support for IMX8M Nano SoC - rename imx8mm-venice.c to venice.c as it is no longer imx8mm specific - update README with differences for IMX8MN vs IMX8MM Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
generated by cgit v1.1 at 2024-08-06 07:35:11 +0000