aboutsummaryrefslogtreecommitdiff
path: root/common
AgeCommit message (Collapse)AuthorFilesLines
2017-09-01Revert "Merge git://git.denx.de/u-boot-video"Tom Rini1-5/+0
This reverts commit 1d20170467b079642be96996dcd71db64c3c365c, reversing changes made to 6aee2ab68c362ace5a59f89a63abed82e0bf19e5. The mxc_ipuv3_fb.c changes introduce build failures on some targets. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-01Merge git://git.denx.de/u-boot-videoTom Rini1-0/+5
2017-09-01Merge git://git.denx.de/u-boot-imxTom Rini4-1/+45
Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: configs/imx6qdl_icore_mmc_defconfig configs/imx6qdl_icore_rqs_defconfig
2017-08-29spl: do not repeat timer init on i.MX6Anatolij Gustschin1-1/+1
The GPT timer was already initialised in board_init_f() as it is needed in dram init. Do not repeat timer init in board_init_r(). Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
2017-08-29splash_source: Verify FIT magicNiko Mauno1-0/+5
Before reading entire FIT image, add sanity check by testing image header against FDT_MAGIC. This should help avoid problems in situations where FIT is not yet available from storage device, for example when performing initial programming of device. Cc: Anatolij Gustschin <agust@denx.de> Acked-by: Tomas Melin <tomas.melin@vaisala.com>
2017-08-28bootvx_fdt: fix missing 'fdt_fixup_ethernet(...)' on vxWorks bootHannes Schmelzer1-0/+3
Before commit 26d6119 (fdt: Move fdt_fixup_ethernet to a common place) the fdt_fixup_ethernet(...) was called during do_bootvx_fdt(...). Afterwards the only (common) place for this fixup is during image_setup_libfdt(...) and this is only called, at least on ARM platform, from image_setup_linux(...). All this ends up in the fact, that the fdt_fixup_ethernet(...) is only called on booting a linux image and not on booting a vxWorks image. We fix this with adding the fdt_fixup_ethernet(...) call again to do_bootvx_fdt(...) Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-28common: console: Fix duplicated CONFIG in silent env callbackWilson Lee1-2/+2
The silent environment callback function does not update the silent flag during silent env set or unset. That is because of duplicated CONFIG keyword at preprocessor condition in silent environment callback function and cause silent env callback unable to work. This patch is to remove the duplicated CONFIG keywork in silent environment callback function. Signed-off-by: Wilson Lee <wilson.lee@ni.com> Cc: Keng Soon Cheah <keng.soon.cheah@ni.com> Cc: Chen Yee Chew <chen.yee.chew@ni.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2017-08-23spl: add serial download protocol (SDP) supportStefan Agner3-0/+44
Add USB serial download protocol support to SPL. If the SoC started in recovery mode the SPL will immediately switch to SDP and wait for further downloads/commands from the host side. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Łukasz Majewski <lukma@denx.de>
2017-08-21fb_mmc.c: Correct blk_dread() return value checksTom Rini1-2/+2
The function blk_dread will return -ENOSYS on failure or on success the number of blocks read, which must be the number asked to read (otherwise it failed somewhere). Correct this check. Cc: Lukasz Majewski <lukma@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-21common/fb_mmc.c: Fix warnings about castsTom Rini1-2/+2
When building the flash zImage code on aarch64 we see warnings about pointer size casts. Use uintptr_t instead to correct these. Cc: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-By: Sam Protsenko <semen.protsenko@linaro.org>
2017-08-20common/board_f.c: remove CONFIG_SYS_GENERIC_GLOBAL_DATAThomas Petazzoni1-27/+0
CONFIG_SYS_GENERIC_GLOBAL_DATA is no longer used by any board or platform, so support for it can be dropped. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-20spl: spl_mmc.c Correct blk_dread() return value checkTom Rini1-1/+1
The function blk_dread will return -ENOSYS on failure or on success the number of blocks read, which must be the number asked to read (otherwise it failed somewhere). Correct this check. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-20hash: Compile only hardware or software versions of SHA algorithmsTom Rini1-51/+44
Commit 089df18bfe9d ("lib: move hash CONFIG options to Kconfig") moved CONFIG_SHA1, CONFIG_SHA256, CONFIG_SHA_HW_ACCEL, and CONFIG_SHA_PROG_HW_ACCEL config options to Kconfig. So in the case of SPL, CONFIG_SPL_HASH_SUPPORT enables CONFIG_SHA1 and CONFIG_SHA256 which enables SHA SW library by default. But in the case of platforms with SHA HW library support, SHA SW library becomes redundant and increases size of SPL by approx 18K. Rework the code so that we have named members and only have either software or hardware versions of the algorithm, depending on the relevant config options. Update the comment around hash_algo to reflect this as well. Reported-by: Sumit Garg <sumit.garg@nxp.com> Cc: Sumit Garg <sumit.garg@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Sumit Garg <sumit.garg@nxp.com>
2017-08-19lcd: avoid possible NULL dereferencexypron.glpk@gmx.de1-1/+2
Do not dereference bmp before the check if it is NULL. The problem was indicated by cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-18Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini1-1/+1
2017-08-17spl: fix Makefile for NOR, XIP and YMODEMPhilipp Tomsich1-3/+3
During the the conversion to $(SPL_TPL_), the SPL_ fragment was left over for the NOR, XIP and YMODEM boot methods in SPL, making these unselectable. This commit fixes this by dropping the spurious 'SPL_' fragment from each line. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reported-by: Bo Shen <voice.shen@gmail.com> Fixes: f94e643 (spl: consistently use $(SPL_TPL_) to select features for SPL and TPL builds)
2017-08-17dm: sata: Support driver model with the 'sata' commandSimon Glass1-1/+1
Update this command to support driver model. This has a different way of starting and stopping SATA. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16env: Rename some other getenv()-related functionsSimon Glass3-13/+13
We are now using an env_ prefix for environment functions. Rename these other functions as well, for consistency: getenv_vlan() getenv_bootm_size() getenv_bootm_low() getenv_bootm_mapsize() env_get_default() Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16env: Rename eth_getenv_enetaddr() to eth_env_get_enetaddr()Simon Glass1-6/+6
Rename this function for consistency with env_get(). Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16env: Rename getenv_hex(), getenv_yesno(), getenv_ulong()Simon Glass4-8/+8
We are now using an env_ prefix for environment functions. Rename these for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16env: Rename getenv/_f() to env_get()Simon Glass26-64/+67
We are now using an env_ prefix for environment functions. Rename these two functions for consistency. Also add function comments in common.h. Quite a few places use getenv() in a condition context, provoking a warning from checkpatch. These are fixed up in this patch also. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16env: Rename common functions related to setenv()Simon Glass4-7/+7
We are now using an env_ prefix for environment functions. Rename these commonly used functions, for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16env: Rename setenv() to env_set()Simon Glass12-16/+16
We are now using an env_ prefix for environment functions. Rename setenv() for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-15Move environment files from common/ to env/Simon Glass21-4553/+1
About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-14common: Move CONFIG_BOOTARGS to KconfigSam Protsenko1-0/+16
Also introduce CONFIG_USE_BOOTARGS option so we can control if CONFIG_BOOTARGS defined at all. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [trini: Resync r8a779[56]_ulcb, various ls10xx targets] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14Merge branch 'master' of git://git.denx.de/u-boot-rockchipTom Rini5-38/+157
2017-08-13boot_fit: Change return value from FDT_ERROR to -EINVAL in fdt_offset()Nobuhiro Iwamatsu1-1/+1
FDT_ERROR is defined as unsigned long. However, since the return value of fdt_offset() is int, a warning will occur when compiling. Also, it is better to use -EINVAL than FDT_ERROR. This fixes this problem by change return value from FDT_ERROR to -EINVAL. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Franklin S Cooper Jr <fcooper@ti.com> Reviewed-by: Franklin S Cooper Jr <fcooper@ti.com>
2017-08-13dm: timer: normalise SPL and TPL supportPhilipp Tomsich1-8/+0
To fully support DM timer in SPL and TPL, we need a few things cleaned up and normalised: - inclusion of the uclass and drivers should be an all-or-nothing decision for each stage and under control of $(SPL_TPL_)TIMER instead of having the two-level configuration with TIMER and $(SPL_TPL_)TIMER_SUPPORT - when $(SPL_TPL_)TIMER is enabled, the ARMv8 generic timer code can not be compiled in This normalises configuration to $(SPL_TPL_)TIMER and moves the config options to drivers/timer/Kconfig (and cleans up the collateral damage to some defconfigs that had SPL_TIMER_SUPPORT enabled). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-13moveconfig: migrate TPL_STACK, TPL_TEXT_BASE and TPL_MAX_SIZEPhilipp Tomsich1-0/+1
We can finally drop TPL_STACK, TPL_TEXT_BASE and TPL_MAX_SIZE off the whitelist (this time it's really happening!) and migrate the setting (only used on the RK3368-uQ7 so far) into Kconfig. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-13spl: support TPL_STACK, TPL_MAX_SIZE and TPL_TEXT_BASE via KconfigPhilipp Tomsich1-0/+39
Let's clean up behind ourselves and move the (newly defined) TPL_STACK, TPL_MAX_SIZE and TPL_TEXT_BASE into Kconfig. Given that 0x0 might be considered to be valid values for TPL_TEXT_BASE and TPL_STACK, we need to introduce helper config options ("TPL_NEEDS_SEPARATE_...") to indicate that these symbols are used (and not inherited from their SPL variants) for any given target-platform. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-13spl: Kconfig: migrate $(SPL_TPL_)LDSCRIPT to KconfigPhilipp Tomsich1-0/+19
Now that we have split up SPL_LDSCRIPT into a SPL and TPL variant and have started to use the TPL-variant for the RK3368, it's time to clean up behind ourselves: move both variants into Kconfig and remove them from the whitelist. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-13spl: add TPL_DRIVER_MISC_SUPPORT optionPhilipp Tomsich1-0/+8
This adds the TPL_DRIVER_MISC_SUPPORT option to allow activation of DRIVER_MISC_SUPPORT for devices that need it in the TPL stage. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-13spl: consistently use $(SPL_TPL_) to select features for SPL and TPL buildsPhilipp Tomsich2-23/+23
To allow for a finer-grained control of features for TPL and SPL builds all modules/boot-methods/etc. need to be consistently selected based on the $(SPL_TPL_) macros. This allows splitting the associated config-options in Kconfig: we don't split the Kconfig options here and now, as this should happen on an as-needed basis, whenever someone needs a feature/boot-method/etc. in their TPL. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-13spl: Kconfig: split SYS_MALLOC_SIMPLE for TPL and SPLPhilipp Tomsich1-0/+9
As include/malloc.h already checks for SYS_MALLOC_SIMPLE using the CONFIG_IS_ENABLED macro, we need to move to having separate entries as we switch to fully separate configuration for SPL and TPL. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-13spl: dm: use CONFIG_IS_ENABLED to test for the DM optionPhilipp Tomsich1-2/+3
Even though there's now a TPL_DM configuration option, the spl logic still checks for SPL_DM and thus does not pick up the proper config option. This introduces the use of CONFIG_IS_ENABLED(DM) in spl.c to always pick up the desired configuration option instead of having a hard-coded check for the SPL variant. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-13spl: dm: Kconfig: fix help text for SPL/TPL confusionPhilipp Tomsich1-5/+5
TPL_NAND_SUPPORT, TPL_SERIAL_SUPPORT, TPL_SPI_FLASH_SUPPORT and TPL_SPI_SUPPORT refer to SPL in their help text. This fixes up the description to correctly reference TPL. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-13spl: use TPL_SYS_MALLOC_F_LEN for TPLPhilipp Tomsich1-1/+1
The (upstream) changes to break up SYS_MALLOC_F_LEN for the full U-Boot and the SPL stage, break TPL (if simple malloc is enabled in TPL). This adds support for a TPL-variant of SYS_MALLOC_F_LEN: - adds TPL_SYS_MALLOC_F_LEN - rewrites a test for CONFIG_SPL_SYS_MALLOC_F_LEN to access CONFIG_VAL(SYS_MALLOC_F_LEN) Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-13spl: configure 'return to bootrom' separately for SPL and TPLPhilipp Tomsich1-0/+11
On the RK3368, we want our TPL to use the 'return to bootrom' boot method (to have the bootrom load up the SPL stage) and then continue with different boot methods (MMC, SPI, etc.) from SPL. This adds the config option needed to control the availabily of the 'return to bootrom' boot-method separately for the TPL stage. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-13spl: add a 'return to bootrom' boot methodPhilipp Tomsich3-0/+39
Some devices (e.g. the RK3368) have only limited SRAM, but provide support for loading the next boot stage after our SPL performs basic setup (e.g. DRAM). For target systems like these, we add a boot device BOOTROM that will invoke a board-specific hook to return to the bootrom (if supported). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-04common/env_embedded.c: rename PPCENV/PPCTEXT macrosThomas Petazzoni1-6/+4
The environment has pretty much nothing to do with just "PPC", so rename the macros to just __UBOOT_ENV_SECTION__ which is more readable. In addition, only a single macro is needed: the environment now goes either to the default section (USE_HOSTCC is defined) or in the .text section. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-08-04common/env_embedded.c: drop support for CONFIG_SYS_USE_PPCENVThomas Petazzoni1-10/+3
CONFIG_SYS_USE_PPCENV is no longer used anywhere. It was used to put the environment in the special .ppcenv section, but the last architecture using this section (SuperH) has been changed to not use it. Therefore, this commit drops support for CONFIG_SYS_USE_PPCENV entirely. We only handle two cases: - We're building the host tool tools/envcrc, in which case the environment is place with no special section attribute (so it depends up in .data) - We're building U-Boot itself, in which case the environnement is placed in the .text section. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-08-04Merge tag 'xilinx-for-v2017.09' of git://www.denx.de/git/u-boot-microblazeTom Rini1-1/+1
Xilinx changes for v2017.09 Zynq: - Add Z-Turn board support fpga: - Remove intermediate buffer from code Zynqmp: - dts cleanup - change psu_init handling - Add options to get silicon version - Fix time handling - Map OCM/TCM via MMU - Add new clock driver
2017-08-02common: board_f: Make reserve_mmu a weak functionSiva Durga Prasad Paladugu1-1/+1
Make reserve_mmu a weak so that it provides an option to customize this routine as per platform need Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01Merge git://git.denx.de/u-boot-x86Tom Rini1-2/+0
2017-08-01x86: kconfig: Select ARCH_EARLY_INIT_R in the platform KconfigBin Meng1-1/+0
This is architecture-dependent early initialization hence should be put in the platform Kconfig. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01x86: kconfig: Let board select BOARD_EARLY_INIT_FBin Meng1-1/+0
CONFIG_BOARD_EARLY_INIT_F literally indicates board-specific codes and should be not 'default y' for all x86 boards. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01fdt: Correct fdt_get_base_address()Simon Glass1-5/+2
This function appears to obtain the value of the 'ranges' property rather than 'reg'. As such it does not behave as documented or expected. In addition it picks up the second field of the property which is the size (with prop += naddr) rather than the first which is the address. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-01dm: mmc: Allow disabling driver model in SPLSimon Glass1-2/+2
At present if U-Boot proper uses driver model for MMC, then SPL has to also. While this is desirable, it places a significant barrier to moving to driver model in some cases. For example, with a space-constrained SPL it may be necessary to enable CONFIG_SPL_OF_PLATDATA which involves adjusting some drivers. Add new SPL versions of the options for DM_MMC, DM_MMC_OPS and BLK. By default these follow their non-SPL versions, but this can be changed by boards which need it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-31dm: console: Check for serial devices properlySimon Glass1-1/+10
With driver model the serial device is often not called "serial". Mark driver-model stdio devices so that they can be detected and we can look up the uclass. This is a more reliable way of finding out whether the console is connected to a serial device or not. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-31console: Unify the check for a serial consoleSimon Glass1-2/+17
Put the check for whether a console is a serial device in a function so that we can share the code in the two places that use it. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-12 15:28:50 +0000