aboutsummaryrefslogtreecommitdiff
path: root/common
AgeCommit message (Collapse)AuthorFilesLines
2007-07-31ppc4xx: Update AMCC Bamboo 440EP supportEugene OBrien1-5/+5
Changed storage type of cfg_simulate_spd_eeprom to const Changed storage type of gpio_tab to stack storage (Cannot access global data declarations in .bss until afer code relocation) Improved SDRAM tests to catch problems where data is not uniquely addressable (e.g. incorrectly programmed SDRAM row or columns) Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules Fixed AM29LV320DT (OpCode Flash) sector map Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com> Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-26ppc4xx: Add support for AMCC 405EP Taihu boardJohn Otken1-0/+2
Signed-off-by: John Otken <john@softadvances.com>
2007-07-16Merge with /home/stefan/git/u-boot/u-boot-coldfire-freescaleStefan Roese2-1/+54
2007-07-13make show_boot_progress () weak.Heiko Schocher7-150/+110
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-07-11Fix some compile problems introduced by the latest CFG_CMD_xxx cleanupStefan Roese2-4/+3
Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-10Merge branch 'master' into u-boot-5329-earlyJohn Rigby10-93/+906
2007-07-10common/: Remove lingering references to CFG_CMD_* symbols.Jon Loeliger35-67/+69
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. Those always evaluated TRUE, and thus were always compiled even when IDE really wasn't defined/wanted. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-09Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!Jon Loeliger1-3/+3
All of the choices for CONFIG_BOOTP_ are now documented in the README file. You must now individually select exactly the set that you want using a series of #define CONFIG_BOOTP_<x> statements in the board port config files now. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-09Merge with /home/hs/Atronic/u-bootWolfgang Denk6-38/+113
2007-07-08common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDSJon Loeliger12-19/+19
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-08common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.Jon Loeliger11-23/+22
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-08common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.Jon Loeliger14-78/+60
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-08common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.Jon Loeliger22-63/+61
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-06[NAND] Bad block skipping for command nbootThomas Knobloch1-5/+32
The old implementation of command nboot does not support reading the image from NAND flash with skipping of bad blocks. The patch implements a new version of the nboot command: by calling nboot.jffs2 from the u-boot command line the command will load the image from NAND flash with respect to bad blocks (by using nand_read_opts()). This is similar to e.g. the NAND read command: "nand read.jffs2 ...". Signed-off-by: Thomas Knobloch <knobloch@siemens.com> Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-04common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).Jon Loeliger13-15/+15
This is a compatibility step that allows both the older form and the new form to co-exist for a while until the older can be removed entirely. All transformations are of the form: Before: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) After: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-04common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).Jon Loeliger25-71/+92
This is a compatibility step that allows both the older form and the new form to co-exist for a while until the older can be removed entirely. All transformations are of the form: Before: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) After: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-04common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).Jon Loeliger21-50/+51
This is a compatibility step that allows both the older form and the new form to co-exist for a while until the older can be removed entirely. All transformations are of the form: Before: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) After: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-03Merge with /home/wd/git/u-boot/custodian/u-boot-testingWolfgang Denk3-7/+719
2007-06-30Fix S-ATA support.Mushtaq Khan1-4/+4
Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
2007-06-22Coding stylke cleanup; rebuild CHANGELOGWolfgang Denk2-3/+3
2007-06-22Adapt log buffer code to support Linux 2.6Igor Lisitsin1-45/+71
A new environment variable, "logversion", selects the log buffer behaviour. If it is not set or set to a value other than 2, then the old, Linux 2.4.4, behaviour is selected. Signed-off-by: Igor Lisitsin <igor@emcraft.com> --
2007-06-22[PCS440EP] upgrade the PCS440EP board:Heiko Schocher6-38/+113
- Show on the Status LEDs, some States of the board. - Get the MAC addresses from the EEProm - use PREBOOT - use the CF on the board. - check the U-Boot image in the Flash with a SHA1 checksum. - use dynamic TLB entries generation for the SDRAM Signed-off-by: Heiko Schocher <hs@denx.de>
2007-06-18Added M5329AFEE and M5329BFEE PlatformsTsiChung Liew2-1/+54
Added board/freescale/m5329evb, cpu/mcf532x, drivers/net, drivers/serial, immap_5329.h, m5329.h, mcfrtc.h, include/configs/M5329EVB.h, lib_m68k/interrupts.c, and rtc/mcfrtc.c Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c, common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h, include/asm-m68k/io.h, include/asm-m68k/mcftimer.h, include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h, include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c, lib_m68k/time.c, net/eth.c and rtc/Makefile Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2007-06-12Change 'repeatable' attribute of some commands to sensible values.Detlev Zundel3-4/+4
Most prominently this changes 'erase' to be non-repeatable. Signed-off-by: Detlev Zundel <dzu@denx.de>
2007-06-12Fix 'run' not to continue after interrupted commandDetlev Zundel1-1/+1
Signed-off-by: Detlev Zundel <dzu@denx.de>
2007-06-08Fix config problems on SC3 board; make ide_reset_timeout work.Wolfgang Denk1-2/+2
2007-06-06Merge with /home/wd/git/u-boot/custodian/u-boot-armWolfgang Denk1-0/+3
2007-06-06USB event poll supportZhang Wei1-1/+5
This patch adds USB event poll support, which could be used in usbkbd and other usb devices driver when the asynchronous interrupt processing is supported. Signed-off-by: Zhang Wei <wei.zhang@freescale.com
2007-05-28Merge with /home/tur/git/u-boot#motionproWolfgang Denk1-0/+2
2007-05-27Fix: Add missing NULL termination in strings expanded by macros parser.Bartlomiej Sieka1-0/+2
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> Acked-by: Bartlomiej Sieka <tur@semihalf.com>
2007-05-18Merge with git://www.denx.de/git/u-boot.gitPeter Pearse2-1/+418
2007-05-17Merge with /home/git/u-bootWolfgang Denk2-1/+418
2007-05-16Fix compile problem cause my Microblaze mergeStefano Babic1-1/+1
Signed-off-by: Stefano Babic <sbabic@denx.de>
2007-05-15Minor coding style cleanup.Wolfgang Denk1-25/+27
2007-05-15Add driver for S-ATA-controller on Intel processors with Southmushtaq khan2-2/+712
Bridge, ICH-5, ICH-6 and ICH-7. Implementation: 1. Code is divided in to two files. All functions, which are controller specific are kept in "drivers/ata_piix.c" file and functions, which are not controller specific, are kept in "common/cmd_sata.c" file. 2. Reading and Writing from the S-ATA drive is done using PIO method. 3. Driver can be configured for 48-bit addressing by defining macro CONFIG_LBA48, if this macro is not defined driver uses the 28-bit addressing. 4. S-ATA read function is hooked to the File system, commands like ext2ls and ext2load file can be used. This has been tested. 5. U-Boot command "SATA_init" is added, which initializes the S-ATA controller and identifies the S-ATA drives connected to it. 6. U-Boot command "sata" is added, which is used to read/write, print partition table and get info about the drives present. This I have implemented in same way as "ide" command is implemented in U-Boot. 7. This driver is for S-ATA in native mode. 8. This driver does not support the Native command queuing and Hot-plugging. Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
2007-05-09New board SMN42 branchPeter Pearse1-0/+3
2007-05-08add: reading special purpose registersMichal Simek1-10/+33
2007-05-08add: FSL control read and writeMichal Simek1-72/+195
2007-05-08Merge git://www.denx.de/git/u-bootMichal Simek11-106/+1144
Conflicts: include/asm-microblaze/microblaze_intc.h include/linux/stat.h
2007-05-07fix: read and write MSR - repair number of parametersMichal Simek1-1/+1
2007-05-07new: add writing to msr registerMichal Simek1-4/+10
2007-05-05Merge with /home/git/u-bootWolfgang Denk1-1/+1
2007-05-05[PATCH] simplify silent consoleLadislav Michl2-40/+6
Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Stefan Roese <sr@denx.de>
2007-05-05[patch] setenv(...) can delete environmentalvariablesJeffrey Mann1-1/+4
update setenv() function so that entering a NULL value for the variable's value will delete the environmental variable Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> Acked-by: Stefan Roese <sr@denx.de>
2007-05-05Merge with git://www.denx.de/git/u-boot-testingWolfgang Denk3-47/+16
2007-05-05new: FSL and MSR support #2Michal Simek1-1/+1
2007-05-05new: FSL and MSR supportMichal Simek1-0/+265
2007-05-04Fix initrd length corruption in bootm command.Wolfgang Denk1-2/+1
When using FDT Images, the length of an inital ramdisk was overwritten (bug introduced by commit 87a449c8, 22 Aug 2006). Patches by Timur Tabi & Johns Daniel. Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-04-25[PATCH] simplify silent consoleLadislav Michl2-46/+12
Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Stefan Roese <sr@denx.de>
2007-04-23Fix file modeStefan Roese1-0/+0
Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit v1.1 at 2024-07-15 22:34:41 +0000