aboutsummaryrefslogtreecommitdiff
path: root/common/spl/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2020-10-22Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiWIP/22Oct2020Tom Rini1-3/+1
- sun8i emac changes (Andre) - SCP firmware (Samuel)
2020-10-22Kconfig: Use hex values for CONFIG_{SPL,TPL}_SIZE_LIMITOvidiu Panait1-4/+4
CONFIG_{SPL,TPL}_SIZE_LIMIT are defined as hex (SPL_SIZE_LIMIT was converted in b51882d0 ("spl: Convert CONFIG_SPL_SIZE_LIMIT to hex"), but there are still places that reference integer values. Change those to hex as well. Also, update the Makefile to check for 0x0 instead of 0. This also fixes the following build error when CONFIG_SPL_SIZE_LIMIT is set by menuconfig to 0x0: ... spl/u-boot-spl.bin exceeds file size limit: limit: 0 bytes actual: 0x80f0 bytes excess: 0x80f0 bytes Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22spl: fit: Minimally parse OS properties with FIT_IMAGE_TINYSamuel Holland1-3/+1
Some boards, specifically 64-bit Allwinner boards (sun50i), are extremely limited on SPL size. One strategy that was used to make space was to remove the FIT "os" property parsing code, because it uses a rather large lookup table. However, this forces the legacy FIT parsing code path, which requires the "firmware" entry in the FIT to reference the U-Boot binary, even if U-Boot is not the next binary in the boot sequence (for example, on sun50i boards, ATF is run first). This prevents the same FIT image from being used with a SPL with CONFIG_SPL_FIT_IMAGE_TINY=n and CONFIG_SPL_ATF=y, because the boot method selection code looks at `spl_image.os`, which is only set from the "firmware" entry's "os" property. To be able to use CONFIG_SPL_ATF=y, the "firmware" entry in the FIT must be ATF, and U-Boot must be a loadable. For this to work, we need to parse the "os" property just enough to tell U-Boot from other images, so we can find it in the loadables list to append the FDT, and so we don't try to append the FDT to ATF (which could clobber adjacent firmware). So add the minimal code necessary to distinguish U-Boot/non-U-Boot loadables with CONFIG_SPL_FIT_IMAGE_TINY=y. This adds about 300 bytes, much less than the 7400 bytes added by CONFIG_SPL_FIT_IMAGE_TINY=n. Acked-by: Patrick Wildt <patrick@blueri.se> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-14spl: Add SPL_SERIAL as requirement for SDP_USB_SDPOtavio Salvador1-0/+1
The USB SDP protocol require the SPL serial support to allow the build to succeed. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2020-09-23spl: Kconfig: Record proper dependency for SPL_ATFMichal Simek1-1/+1
ATF support was all the time based on FIT image support but this dependency is not recorded anywhere. For !SPL_FIT && SPL_ATF there is compilation error: common/spl/spl.c: In function 'board_init_r': common/spl/spl.c:689:26: error: 'struct spl_image_info' has no member named 'fdt_addr' 689 | spl_fixup_fdt(spl_image.fdt_addr); Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23fpga: kconfig: Rename SPL_FPGA_SUPPORT to SPL_FPGAMichal Simek1-1/+1
The patch does sed 's/SPL_FPGA_SUPPORT/SPL_FPGA/g' but also fixing Makefile and zynqmp.c to simplify if/endif logic in zynqmp.c. This change is mostly done to be able to use CONFIG_IS_ENABLED macro and obj-$(CONFIG_$(SPL_)FPGA) in Makefile. For them symbols need to be in sync. And removing one line from Topic Miami boards which is not needed because symbol is not enabled via Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-07fs/squashfs: new filesystemJoao Marcos Costa1-0/+9
Add support for SquashFS filesystem. Right now, it does not support compression but support for zlib will be added in a follow-up commit. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-03spi: Allow separate control of SPI_FLASH_TINY for SPL/TPLSimon Glass1-0/+10
In some cases SPL needs to be able to erase but TPL just needs to read. Allow these to have separate settings for SPI_FLASH_TINY. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-28Convert CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to KconfigAdam Ford1-0/+7
This converts the following to Kconfig: CONFIG_SYS_MMCSD_FS_BOOT_PARTITION Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_SPL_NAND_BASE et al to KconfigAdam Ford1-0/+12
This converts the following to Kconfig: CONFIG_SPL_NAND_BASE CONFIG_SPL_NAND_IDENT Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_SPL_NAND_DRIVERS et al to KconfigAdam Ford1-0/+14
This converts the following to Kconfig: CONFIG_SPL_NAND_DRIVERS CONFIG_SPL_NAND_ECC CONFIG_SPL_NAND_SIMPLE Signed-off-by: Adam Ford <aford173@gmail.com>
2020-06-29spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*Lukasz Majewski1-0/+20
This change allows more fine tuning of driver model based SPI support in SPL and TPL. It is now possible to explicitly enable/disable the DM_SPI support in SPL and TPL via Kconfig option. Before this change it was necessary to use: /* SPI Flash Configs */ #if defined(CONFIG_SPL_BUILD) #undef CONFIG_DM_SPI #undef CONFIG_DM_SPI_FLASH #undef CONFIG_SPI_FLASH_MTD #endif in the ./include/configs/<board>.h, which is error prone and shall be avoided when we strive to switch to Kconfig. The goal of this patch: Provide distinction for DM_SPI support in both U-Boot proper and SPL (TPL). Valid use case is when U-Boot proper wants to use DM_SPI, but SPL must still support non DM driver. Another use case is the conversion of non DM/DTS SPI driver to support DM/DTS. When such driver needs to work in both SPL and U-Boot proper, the distinction is needed in Kconfig (also if SPL version of the driver supports OF_PLATDATA). In the end of the day one would have to support following use cases (in single driver file - e.g. mxs_spi.c): - U-Boot proper driver supporting DT/DTS - U-Boot proper driver without DT/DTS support (deprecated) - SPL driver without DT/DTS support - SPL (and TPL) driver with DT/DTS (when the SoC has enough resources to run full blown DT/DTS) - SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have constrained environment with no fitImage and OF_LIBFDT support). Some boards do require SPI support (with DM) in SPL (TPL) and some only have DM_SPI{_FLASH} defined to allow compiling SPL. This patch converts #ifdef CONFIG_DM_SPI* to #if CONFIG_IS_ENABLED(DM_SPI) and provides corresponding defines in Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [trini: Fixup a few platforms] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-12Add support for SHA384 and SHA512Reuben Dowle1-8/+24
The current recommendation for best security practice from the US government is to use SHA384 for TOP SECRET [1]. This patch adds support for SHA384 and SHA512 in the hash command, and also allows FIT images to be hashed with these algorithms, and signed with sha384,rsaXXXX and sha512,rsaXXXX The SHA implementation is adapted from the linux kernel implementation. [1] Commercial National Security Algorithm Suite http://www.iad.gov/iad/programs/iad-initiatives/cnsa-suite.cfm Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
2020-06-04sifive: fu540: Add U-Boot proper sector startJagan Teki1-1/+2
Add U-Boot proper sector start offset for SiFive FU540. This value is based on the partition layout supported by SiFive FU540. u-boot.itb need to write on this specific offset so-that the SPL will retrieve it from here and load. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-05-15rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRATrevor Woerner1-2/+2
Have this symbol follow the pattern of all other such symbols. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-03spl: sdp: Add CONFIG_SPL_SDP_USB_DEV for USB deviceYe Li1-0/+8
Add a new configuration CONFIG_SPL_SDP_USB_DEV to specify the usb index for spl sdp driver, so that we change use different device. The default value is 0. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01Revert "imx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC boot on falcon ↵Harald Seiler1-9/+0
mode" The CONFIG_SPL_FORCE_MMC_BOOT config flag is not needed as its behavior is the correct one in all cases; using spl_boot_device() instead of the boot_device parameter will lead to inconsistency issues, for example, when a board_boot_order() is defined. In fact, this is the reason the parameter was introduced in the first place, in commit 2b1cdafa9fdd ("common: Pass the boot device into spl_boot_mode()"). This reverts commit 772b55723bcbe8ebe84f579d9cdc831d8e18579d. Link: https://lists.denx.de/pipermail/u-boot/2020-April/405979.html Signed-off-by: Harald Seiler <hws@denx.de>
2020-04-24spl: Kconfig: de-dup SPL_DM_GPIO definitionJoel Johnson1-6/+0
Two nearly concurrent commits (d4d65e112 and bcee8d676) added a SPL_DM_GPIO symbol. Resolve the duplication in favor of the version in drivers/gpio/Kconfig. Signed-off-by: Joel Johnson <mrjoel@lixil.net> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2020-03-16spl: Kconfig: Escape '$(ARCH)' in LDSCRIPT entriesTom Rini1-2/+2
The default SPL / TPL linker script is in the $(ARCH) directory. The way we use this today works but isn't ideal. With an update to Kconfig to re-sync with the Linux Kernel, we need to escape the '$' here so that it will end up being evaluated by make. Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-24sunxi: move CONFIG_SYS_SPI_U_BOOT_OFFS out of defconfigAndre Przywara1-0/+1
For Allwinner SoCs the CONFIG_SYS_SPI_U_BOOT_OFFS value is not really a board choice: The boot ROM only loads the SPL from offset 0 of the SPI NOR flash, and loads at most 32KB. This is a similar situation as on MMC, so consequently we create our "joint" image (SPL + U-Boot proper) with that 32KB offset during the build. So define the value of this symbol to be 32KB by default for every Allwinner SoC. This removes the definition of this symbol from the _defconfig files, and avoids every board to define this over and over again. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-16Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini1-0/+12
- Clearfog: Fix SD booting (Baruch) - Misc updates to MMC handling in SPL to support booting from main data partition (vs hardware boot partition) on MVEBU (Baruch)
2020-01-16spl: mmc: support uboot image offset on main partitionBaruch Siach1-0/+12
On Armada 38x platforms the ROM code loads SPL from offset 0 of eMMC hardware boot partitions. When there are no boot partitions (i.e. SD card) the ROM skips the first sector that usually contains the (logical) partition table. Since the generated .kwb image contains the main U-Boot image in a fixed location (0x140 sectors by default), we end up with the main U-Boot image in offset of 1 sector. The current workaround is to manually set CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x141 to compensate for that. This patch uses the run-time detected boot partition to determine the right offset of the main U-Boot partition. The generated .kwb image is now compatible with both eMMC boot partition, and SD card main data partition. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2020-01-15Kconfig: Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMAVignesh Raghavendra1-1/+1
Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA. This allows to use macros such as CONFIG_IS_ENABLED() that allow conditional compilation of code for SPL and U-Boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07spl: Allow cache drivers to be used in SPLLey Foon Tan1-0/+6
Add an option for building cache drivers in SPL. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-12-26configs: Enable SPL_FSL_PBL for some LayerScape platformsAlison Wang1-2/+6
In commit <db4080d56dec>, SPL_FSL_PBL is removed from the configs of some LayerScape platforms. Actually, SPL_FSL_PBL is needed for SD/NAND boot on LS1021A/LS1043A/LS1046A to create boot binary having SPL binary in PBI format concatenated with u-boot binary. SPL_FRAMEWORK is used on these platforms too. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-12-10spl: cache: Allow cache drivers in SPLRick Chen1-0/+7
When ax25-ae350 try to enable v5l2 cache driver in SPL configuration, it need this option for cache support in SPL. Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
2019-12-05spl: Introduce SPL_DM_GPIO Kconfig defineLukasz Majewski1-0/+6
This define indicates if DM_GPIO shall be supported in SPL. This allows proper operation of DM converted GPIO drivers in SPL, which use boards. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-12-03cosmetic: Fix spelling and whitespace errorsThomas Hebb1-3/+3
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-11-17spl: separate SPL_FRAMEWORK config for spl and tplHeiko Stuebner1-0/+8
Right now enabling SPL_FRAMEWORK will also enable it for the TPL in all cases, making the TPL bigger. There may be cases where the TPL is really size constrained due to its underlying ram size. Therefore introduce a new TPL_FRAMEWORK option and make the relevant conditionals check for both. The default is set to "y if SPL_FRAMEWORK" to mimic the previous behaviour where the TPL would always get the SPL framework if it was enabled in SPL. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-07spl: fix SPI config dependenciesSimon Goldschmidt1-10/+11
As SPL_SPI_FLASH_SUPPORT cannot work without SPL_SPI_SUPPORT, fix dependencies to prevent enabling SPI flash support without basic SPI support. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-11-03spl: Add a size check for TPLSimon Glass1-0/+8
We have the ability to enforce a maximum size for SPL but not yet for TPL. Add a new option for this. Document the size check macro while we are here. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-18spl: mmc: make eMMC HW boot partition configuration optionalAnatolij Gustschin1-6/+22
Loading U-Boot on i.MX8QXP MEK board is broken since recent changes in spl_mmc: U-Boot SPL 2019.10-00162-gff5bd397e4 (Oct 18 2019 - 15:50:45 +0200) Normal Boot WDT: Not found! Trying to boot from MMC2_2 Load image from MMC/SD 0x46400 spl: mmc partition switch failed SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### The newly added CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION option is selected automatically and overrides the EXT_CSC_PART_CONFIG configurations with default value, always selecting the eMMC boot partition 1. Boards which place U-Boot image in other partitions became not bootable. Fix this by making the eMMC HW boot partition selection optional. Fixes: 17241ea0543a (spl: mmc: Add option to set eMMC HW boot partition) Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-10-11spl: Introduce SPL_DM_SPI Kconfig defineLukasz Majewski1-0/+7
This define indicates if DM_SPI shall be supported in SPL. This allows proper operation of DM converted SPI drivers in SPL, which use #if !CONFIG_IS_ENABLED(DM_SPI) to also support not yet DM/DTS converted boards. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-11spl: mmc: Add option to set eMMC HW boot partitionMans Rullgard1-0/+6
This change allows setting pre-defined eMMC boot partition for SPL eMMC booting. It is necessary in the case when one wants to boot (through falcon boot) from eMMC after loading SPL from other memory (like SPI-NOR). Signed-off-by: Mans Rullgard <mans@mansr.com> [lukma: Edit the commit message] Signed-off-by: Lukasz Majewski <lukma@denx.de> Acked-by: Andreas Dannenberg <dannenberg@ti.com>
2019-10-11spl: add a generic function board_init_fPhilippe Reynes1-0/+9
This commit add a generic function board_init_f that only initialize some device (for example serial). It avoid to define a board function only to launch the serial configuration. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-10-09Merge tag 'xilinx-for-v2020.01' of ↵Tom Rini1-0/+1
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2020.01 FPGA: - Enable fpga loading on Versal - Minor fix Microblaze: - Fix LMB configurations to support initrds - Some other cleanups Zynq: - Minor config/dt changes - Add distro boot support for usb1 and mmc1 - Remove Xilinx private boot commands and use only distro boot ZynqMP: - Kconfig cleanups, defconfig updates - Update some dt files - Add firmware driver for talking to PMUFW - Extend distro boot support for jtag - Add new IDs - Add system controller configurations - Convert code to talk firmware via mailbox or SMCs Versal: - Add board_late_init() - Add run time DT memory setup - Add DFU support - Extend distro boot support for jtag and dfu - Add clock driver - Tune mini configurations Xilinx: - Improve documentation (boot scripts, dt binding) - Enable run time initrd_high calculation - Define default SYS_PROMPT - Add zynq/zynqmp virtual defconfig Drivers: - Add Xilinx mailbox driver for talking to firmware - Clean zynq_gem for Versal - Move ZYNQ_HISPD_BROKEN to Kconfig - Wire genphy_init() in phy.c - Add Xilinx gii2rgmii bridge - Cleanup zynq_sdhci - dwc3 fix - zynq_gpio fix - axi_emac fix Others: - apalis-tk1 - clean config file
2019-10-09Merge tag 'u-boot-imx-20191009' of ↵Tom Rini1-1/+11
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191009 ------------------- Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/595148532 - MX6UL / ULZ - Toradex board - Allow to set OCRAM for MX6Q/D - MX7ULP - MX8: (container image, imx8mq_mek), SCU API - fix several board booting from SD/EMMC (cubox-i for example) - pico boards [trini: display5 merged manually] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-08imx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC boot on falcon modeLukasz Majewski1-0/+9
This change tries to fix the following problem: - The board boots (to be more precise - ROM loads SPL) from a slow SPI-NOR memory. As a result the spl_boot_device() will return SPI-NOR as a boot device (which is correct). - The problem is that in 'falcon boot' the eMMC is used as a boot medium to load kernel from its partition. Calling spl_boot_device() will break things as it returns SPI-NOR device. To fix this issue the new CONFIG_SPL_FORCE_MMC_BOOT Kconfig flag is introduced to handle this special use case. By default it is not defined, so there is no change in the legacy code flow. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08ARM: imx: Support larger SPL size on IMX6DQRobert Hancock1-1/+2
Previously the SPL size on all iMX6 platforms was restricted to 68KB because the OCRAM size on iMX6SL/DL parts is only 128KB. However, the other iMX6 variants have 256KB of OCRAM. Add an option CONFIG_MX6_OCRAM_256KB which allows using the full size on boards which don't need to support the SL/DL variants. This allows for an SPL size of 196KB, which makes it much easier to use configurations such as SPL with driver model and FDT control. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Tested-by: Adam Ford <aford173@gmail.com> #imx6q_logic
2019-10-08arm64: zynqmp: Define default SPL_TEXT_BASE address in KconfigMichal Simek1-0/+1
Define default address via Kconfig. There is no need to change this address for most of the boards but it is also possible. This one line save a lot of lines in defconfigs that's why make sense to do it. The similar change has been done by commit 9340d8fe8beb ("sunxi: move CONFIG_SPL_TEXT_BASE from *_defconfig to Kconfig") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2019-10-08spl: Convert CONFIG_SPL_SIZE_LIMIT to hexSimon Glass1-1/+1
This is currently a decimal value which is not as convenient or meaningful. Also U-Boot tends to use hex everywhere. Convert this option to hex and add a comment for the size_check macro. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Acked-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: correct the typo in the commit title] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08spl: Allow tiny printf() to be controlled in SPL and TPLSimon Glass1-1/+1
At present there is only one control for this and it is used for both SPL and TPL. But SPL might have a lot more space than TPL so the extra cost of a full printf() might be acceptable. Split the option into two, providing separate SPL and TPL controls. The TPL setting defaults to the same as SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08spl: handoff: Correct Kconfig condition for SPL and TPLSimon Glass1-2/+2
At present these options can be enabled when bloblist is not enabled for SPL or TPL. This is incorrect as SPL handoff requires bloblist. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-26Merge branch '2019-08-26-master-imports'Tom Rini1-0/+1
- Assorted minor bugfixes
2019-08-26Kconfig: Varios: Fix more SPL, TPL dependenciesAdam Ford1-0/+1
Several options are presenting themselves on a various boards where the options are clearly not used. (ie, SPL/TPL options when SPL or TPL are not defined) This patch is not attempting to be a complete list of items, but more like low hanging fruit. In some instances, I wasn't sure of DM was required, so I simply made them SPL or TPL. This patch attempts to reduce some of the menuconfig noise by defining dependencies so they don't appear when not used. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-26Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini1-0/+17
- Support SPL and OpenSBI (FW_DYNAMIC firmware) boot. - Fix qemu kconfig build warning.
2019-08-26spl: support booting via RISC-V OpenSBILukas Auer1-0/+17
RISC-V OpenSBI is an open-source implementation of the RISC-V Supervisor Binary Interface (SBI) specification. It is required by Linux and U-Boot running in supervisor mode. This patch adds support for booting via the OpenSBI FW_DYNAMIC firmware. It supports OpenSBI version 0.4 and higher. In this configuration, U-Boot SPL starts in machine mode. After loading OpenSBI and U-Boot proper, it will start OpenSBI. All necessary parameters are generated by U-Boot SPL and are passed to OpenSBI. U-Boot proper is started in supervisor mode by OpenSBI. Support for OpenSBI is enabled with CONFIG_SPL_OPENSBI. An additional configuration entry, CONFIG_SPL_OPENSBI_LOAD_ADDR, is used to specify the load address of the OpenSBI firmware binary. It is not used directly in U-Boot and instead is intended to make the value available to scripts such as FIT configuration generators. The header file include/opensbi.h is based on header files from the OpenSBI project. They are recent, as of commit bae54f764570 ("firmware: Add fw_dynamic firmware"). Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-25Convert CONFIG_SYS_SPI_U_BOOT_OFFS to KconfigHannes Schmelzer1-0/+8
This converts the following to Kconfig: CONFIG_SYS_SPI_U_BOOT_OFFS Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> [trini: Expose this for SPL_SPI_SUNXI for now] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-23Kconfigs: Various: Fix some SPL, TPL and ARM64 dependenciesAdam Ford1-0/+2
Several options are presenting themselves on a various boards where the options are clearly not used. (ie, arm64 options on arm9, or SPL/TPL options when SPL or TPL are not defined) This patch is not attempting to be a complete list of items, but more like low hanging fruit. This patch attempts to reduce some of the menuconfig noise by defining dependencies so they don't appear when not used. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-11spl: implement stack usage checkSimon Goldschmidt1-0/+19
This implements a stack usage check in SPL. Many boards start up SPL to run code + data from one common, rather small SRAM. To implement a sophisticated SPL binary size limit on such boards, the stack size (as well as malloc size and global data size) must be subtracted from this SRAM size. However, to do that properly, the stack size first needs to be known. This patch adds a new Kconfig option: - SPL_SYS_REPORT_STACK_F_USAGE: memset(0xaa) the whole area of the stack very early and check stack usage based on this constant later before the stack is switched to DRAM Initializing the stack and checking it is implemented in weak functions, in case a board does not use the stack as saved in gd->start_addr_sp. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
generated by cgit v1.1 at 2024-08-03 12:52:35 +0000