aboutsummaryrefslogtreecommitdiff
path: root/cmd
AgeCommit message (Collapse)AuthorFilesLines
2016-05-17dm: scsi: Rename CONFIG_CMD_SCSI to CONFIG_SCSISimon Glass2-3/+3
This option currently enables both the command and the SCSI functionality. Rename the existing option to CONFIG_SCSI since most of the code relates to the feature. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: sata: Fix code style problems in cmd/sata.cSimon Glass1-5/+7
This file has a few coding style problems. Fix these to make future updates easier. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: ide: Remove the forward declarationsSimon Glass1-714/+682
Reorder the code to avoid needing forward declarations. Fix up code style as needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: ide: Correct various code style problemsSimon Glass1-28/+29
Adjust common/ide.c so that it passes most checkpatch.pl checks. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: scsi: Fix up code styleSimon Glass1-233/+226
Update the code style of this file so that it passes checkpatch.pl. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: scsi: Remove the forward declarationsSimon Glass1-332/+310
Reorder the code to avoid needing forward declarations. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-05Fix various typos, scattered over the code.Robert P. J. Day2-2/+2
Spelling corrections for (among other things): * environment * override * variable * ftd (should be "fdt", for flattened device tree) * embedded * FTDI * emulation * controller
2016-05-05mmc: Fix error in RPMB codeMarek Vasut1-1/+1
Since we do not build any board with CONFIG_SUPPORT_EMMC_RPMB , this piece of code evaded conversion. Fix the following compiler error: cmd/mmc.c: In function 'do_mmcrpmb': cmd/mmc.c:316:32: error: 'struct blk_desc' has no member named 'part_num' original_part = mmc->block_dev.part_num; ^ Signed-off-by: Marek Vasut <marex@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com>
2016-05-03i2c/eeprom: Always define I2C_RXTX_LENMario Six1-0/+4
I2C_RXTX_LEN from include/i2c.h is not defined if CONFIG_DM_I2C is enabled. This leads to a compilation error on boards that enable both CONFIG_CMD_EEPROM and CONFIG_DM_I2C. To avoid this, we define I2C_RXTX_LEN in cmd/eeprom.c if it is not already defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2016-05-02Fix spelling of "occurred".Vagrant Cascadian1-4/+4
Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-04-25cmd: Kconfig: Add a Kconfig options for a few CMDDinh Nguyen1-0/+70
Add the following CMD options to Kconfig: CMD_BOOTZ CMD_ASKENV CMD_GREPENV CMD_USB_MASS_STORAGE CMD_FAT CMD_MII CMD_CACHE CMD_DFU CMD_EXT2 CMD_EXT4 CMD_EXT4_WRITE CMD_FS_GENERIC CMD_MMC Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [trini: Don't make CMD_USB_MASS_STORAGE nor CMD_DFU depend on CMD_USB] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25configs: Re-sync almost all of cmd/KconfigTom Rini1-1/+1
This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-20cmd/usb_mass_storage.c: Rework ums_init() ret logic slightlyTom Rini1-13/+5
Previously, ret could be used uninitialized if blk_get_device_part_str() failed. Default to ret being set to -1 so that we always return an err up if we have a problem and then invert the logic on testing ums_count as when that is non-zero is the time we can return 0. Cc: John Tobias <john.tobias.ph@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-20Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini1-10/+29
Conflicts: configs/bcm28155_ap_defconfig configs/dra72_evm_defconfig configs/dra74_evm_defconfig configs/ma5d4evk_defconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-20usb: ums - expose selected partition/sJohn Tobias1-10/+29
By applying this patch, it will give us some flexibility to expose a selected partition/s. e.g: 1. To expose several partitions ums 0 mmc 0:1,0:6 2. To expose the all partitions ums 0 mmc 0:0 3. To expose multiple partititions on several devices ums 0 mmc 0:1,1:6 4. It support legacy format ums 0 mmc 0 Signed-off-by: John Tobias <john.tobias.ph@gmail.com>
2016-04-18efi_loader: Pass fdt address directly to bootefi cmdAlexander Graf1-20/+16
The bootefi cmd today fetches its device tree pointer from either the location appointed by "fdt addr" with a fallback to the U-Boot control fdt. This integration is unusual for U-Boot and diverges from the way we usually handle parameters to boot commands. So let's pass the fdt directly into the bootefi command instead and move the control fdt logic into the distro boot script. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Andreas Färber <afaerber@suse.de>
2016-04-18efi_loader: Put fdt into convenient locationAlexander Graf1-4/+26
The uEFI spec doesn't dictate where the device tree should live at, but legacy 32bit ARM grub2 has some assumptions that it may stay at its place when it's already loaded by the firmware. So let's put it somewhere where Linux that comes after would happily find it - around the recommended 128MB line. Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Andreas Färber <afaerber@suse.de>
2016-04-18efi_loader: Use system fdt as fallbackAlexander Graf1-6/+31
When the user did not pass any device tree or the boot script didn't find any, let's use the system device tree as last resort to get something the payload (Linux) may understand. This means that on systems that use the same device tree for U-Boot and Linux we can just share it and there's no need to manually provide a device tree in the target image. While at it, also copy and pad the device tree by 64kb to give us space for modifications. Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Andreas Färber <afaerber@suse.de>
2016-04-18efi_loader: Increase path string to 32 charactersAlexander Graf1-1/+1
Whenever we want to tell our payload about a path, we limit ourselves to a reasonable amount of characters. So far we only passed in device names - exceeding 16 chars was unlikely there. However by now we also pass real file path information, so let's increase the limit to 32 characters. That way common paths like "boot/efi/bootaa64.efi" fit just fine. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-04-18efi_loader: Pass file path to payloadAlexander Graf2-8/+27
The payload gets information on where it got loaded from. This includes the device as well as file path. So far we've treated both as the same thing and always gave it the device name. However, in some situations grub2 actually wants to find its loading path to find its configuration file. So let's split the two semantically separte bits into separate structs and pass the loaded file name into our payload when we load it using "load". Signed-off-by: Alexander Graf <agraf@suse.de>
2016-04-18efi_loader: Add el torito supportAlexander Graf1-0/+14
When loading an el torito image, uEFI exposes said image as a raw block device to the payload. Let's do the same by creating new block devices with added offsets for the respective el torito partitions. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-04-18cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDTMichal Simek2-1/+8
Create CMD_FDT Kconfig entry to have an option to disable fdt command which is not required for small configuration which requires libfdt only. Enable it by default for all targets which enables OF_LIBFDT. Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Fixup flea3/sandbox/id8313/siemens-am33xx/smartweb] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-18common: env: support sata devicePeng Fan1-1/+2
Introduce env support for sata device. 1. Implement write_env/read_env/env_relocate_spec/saveenv/sata_get_env_dev 2. If want to enable this feature, define CONFIG_ENV_IS_IN_SATA, and define CONFIG_SYS_SATA_ENV_DEV or implement your own sata_get_ev_dev. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Stuart Longland <stuartl@vrt.com.au> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-11cmd: blkcache: simplify sub-command handlingEric Nelson1-4/+2
Signed-off-by: Eric Nelson <eric@nelint.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2016-04-11cmd: blkcache: remove indentation from output of 'show'Eric Nelson1-5/+5
Signed-off-by: Eric Nelson <eric@nelint.com>
2016-04-10dm: usb: Do not reprobe usb hosts on "usb tree" commandHans de Goede1-2/+6
Some usb hosts may have failed to probe on "usb start", i.e. an otg host without an otg-host cable plugged in. "usb tree" would cause the probe method of these hosts to get called again, something which should only happen on "usb reset". This commit fixes this. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-10usb: kbd: Do not deregister usbkbd twice when using dmHans de Goede1-1/+1
The dm usb_kbd_remove function() will deregister the usb keyboard for us on a "usb reset" / "usb stop" so there is no need to manually call usb_kbd_deregister() in the dm case. This commit removes usb_kbd_deregister() in the dm case fixing the following "usb reset" errors: usb_kbd_remove: warning, ret=-6 device_remove: Device 'usb_kbd' failed to remove, but children are gone Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01sata: use block layer for sata commandEric Nelson1-2/+4
Call blk_dread, blk_dwrite, blk_derase to ensure that the block cache is used if enabled and to remove build breakage when CONFIG_BLK is enabled. Signed-off-by: Eric Nelson <eric@nelint.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-01mmc: use block layer in mmc commandEric Nelson1-3/+4
Call blk_dread, blk_dwrite, blk_derase to ensure that the block cache is used if enabled and to remove build breakage when CONFIG_BLK is enabled. Signed-off-by: Eric Nelson <eric@nelint.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-01drivers: block: add block device cacheEric Nelson3-0/+101
Add a block device cache to speed up repeated reads of block devices by various filesystems. This small amount of cache can dramatically speed up filesystem operations by skipping repeated reads of common areas of a block device (typically directory structures). This has shown to have some benefit on FAT filesystem operations of loading a kernel and RAM disk, but more dramatic benefits on ext4 filesystems when the kernel and/or RAM disk are spread across multiple extent header structures as described in commit fc0fc50. The cache is implemented through a minimal list (block_cache) maintained in most-recently-used order and count of the current number of entries (cache_count). It uses a maximum block count setting to prevent copies of large block reads and an upper bound on the number of cached areas. The maximum number of entries in the cache defaults to 32 and the maximum number of blocks per cache entry has a default of 2, which has shown to produce the best results on testing of ext4 and FAT filesystems. The 'blkcache' command (enabled through CONFIG_CMD_BLOCK_CACHE) allows changing these values and can be used to tune for a particular filesystem layout. Signed-off-by: Eric Nelson <eric@nelint.com>
2016-04-01arm64: booti: add missing unmap_sysmem()Masahiro Yamada1-0/+5
Make sure to call unmap_sysmem() for address allocated by map_sysmem() before leaving the function; however this patch gives no impact on the behavior because map_sysmem()/unmap_sysmem() does nothing except on Sandbox. Sandbox never runs this code because "booti" is a command for booting ARM64 kernel image. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2016-04-01Drop command-processing code when CONFIG_CMDLINE is disabledSimon Glass1-0/+4
Command parsing and processing code is not needed when the command line is disabled. Remove this code in that case. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27cmd: spi: check return value of strdupPeng Fan1-0/+2
Check return value of strdup. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com>
2016-03-27efi_loader: Add GOP supportAlexander Graf1-0/+3
The EFI standard defines a simple boot protocol that an EFI payload can use to access video output. This patch adds support to expose exactly that one (and the mode already in use) as possible graphical configuration to an EFI payload. With this, I can successfully run grub2 with graphical output. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-03-22Fix spelling of "transferred".Vagrant Cascadian1-1/+1
Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-22cmd: Fix license commandTom Rini1-3/+3
The license command isn't usually built and has a few problems: - The rules to generate license.h haven't worked in a long time, re-write these based on the bmp_logo.h rules. - 'tok' is unused and the license text size has increased - bin2header.c wasn't grabbing unistd.h to know the prototype for read(). Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-22Add an option to enable the command lineSimon Glass1-0/+12
Add a new Kconfig option for the command line. This is enabled by default, but when disabled it will remove the command line. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-22cbfs: Update a function to be staticSimon Glass1-4/+8
All command functions should be static. Update the CBFS functions to follow this rule. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-17gpio: Report errors when GPIOs cannot be readSimon Glass1-7/+27
Some controllers do not allow the output value to be read. Detect this and report the error in that case. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-17cpu: Add support for microcode version and CPU IDSimon Glass1-0/+7
Some CPUs use microcode and each core can have a different version of microcode loaded. Also some CPUs support the concept of an integer ID used for identification purposes. Add support for these in the CPU uclass. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16cmd: scsi: Group the command portion together, guard with !CONFIG_SPL_BUILDTom Rini1-21/+22
When we switch to including all linker lists in SPL it is important to not include commands as that may lead to link errors due to other things we have already discarded. In this case, the SCSI code needs a lot of attention so for now just guard the command portions. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-15efi_loader: Pass proper device path in on bootAlexander Graf2-9/+27
EFI payloads can query for the device they were booted from. Because we have a disconnect between loading binaries and running binaries, we passed in a dummy device path so far. Unfortunately that breaks grub2's logic to find its configuration file from the same device it was booted from. This patch adds logic to have the "load" command call into our efi code to set the device path to the one we last loaded a binary from. With this grub2 properly detects where we got booted from and can find its configuration file, even when searching by-partition. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-03-15efi_loader: Call fdt preparation functionsAlexander Graf1-0/+8
We have a nice framework around image fils to prepare a device tree for OS execution. That one patches in missing device tree nodes and fixes up the memory range bits. We need to call that one from the EFI boot path too to get all those nice fixups. This patch adds the call. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-03-15efi_loader: Add "bootefi" commandAlexander Graf3-0/+190
In order to execute an EFI application, we need to bridge the gap between U-Boot's notion of executing images and EFI's notion of doing the same. The best path forward IMHO here is to stick completely to the way U-Boot deals with payloads. You manually load them using whatever method to RAM and then have a simple boot command to execute them. So in our case, you would do # load mmc 0:1 $loadaddr grub.efi # bootefi $loadaddr which then gets you into a grub shell. Fdt information known to U-boot via the fdt addr command is also passed to the EFI payload. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> [trini: Guard help text with CONFIG_SYS_LONGHELP] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-14Merge git://git.denx.de/u-boot-dmTom Rini20-128/+125
2016-03-14Kconfig: Move CONFIG_FIT and related options to KconfigSimon Glass1-3/+3
There are already two FIT options in Kconfig but the CONFIG options are still in the header files. We need to do a proper move to fix this. Move these options to Kconfig and tidy up board configuration: CONFIG_FIT CONFIG_OF_BOARD_SETUP CONFIG_OF_SYSTEM_SETUP CONFIG_FIT_SIGNATURE CONFIG_FIT_BEST_MATCH CONFIG_FIT_VERBOSE CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_RSA Unfortunately the first one is a little complicated. We need to make sure this option is not enabled in SPL by this change. Also this option is enabled automatically in the host builds by defining CONFIG_FIT in the image.h file. To solve this, add a new IMAGE_USE_FIT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Note: Masahiro's moveconfig.py script is amazing. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add microblaze change, various configs/ re-applies] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-14Drop CONFIG_CRAMFS_CMDLINESimon Glass1-5/+0
This option doesn't do anything. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-14dm: sandbox: Add driver-model block-device support for sandboxSimon Glass1-1/+8
Update the host driver to support driver model for block devices. A future commit will remove the old code, but for now it is useful to be able to use it both with and without CONFIG_BLK. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14dm: block: Adjust device calls to go through helpers functionSimon Glass4-10/+8
To ease conversion to driver model, add helper functions which deal with calling each block device method. With driver model we can reimplement these functions with the same arguments. Use inline functions to avoid increasing code size on some boards. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14dm: block: Rename device number member dev to devnumSimon Glass9-21/+21
This is a device number, and we want to use 'dev' to mean a driver model device. Rename the member. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
generated by cgit v1.1 at 2024-09-07 19:05:25 +0000