aboutsummaryrefslogtreecommitdiff
path: root/cmd/mvebu
AgeCommit message (Collapse)AuthorFilesLines
2022-05-16cmd: mvebu: Hide bubt specific options when bubt is disabledPali Rohár1-0/+4
CONFIG_MVEBU_NAND_BOOT, CONFIG_MVEBU_SPI_BOOT, CONFIG_MVEBU_MMC_BOOT and CONFIG_MVEBU_UBOOT_DFLT_NAME are unused when CONFIG_CMD_MVEBU_BUBT is not enabled. So hide them. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-27Convert CONFIG_ENV_SPI_BUS et al to KconfigTom Rini1-2/+2
This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE As part of this, we use Kconfig to provide the defaults now that were done in include/spi_flash.h. We also in some cases change from using CONFIG_ENV_SPI_FOO to CONFIG_SF_DEFAULT_FOO as those were the values in use anyhow as ENV was not enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-28arm: mvebu: Fix comments about kwbimage structuresPali Rohár1-1/+1
kwbimage v1 is used on more SoCs. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28arm: mvebu: Update name of kwbimage v1 field at offset 0x2-0x3Pali Rohár1-1/+1
At this offset is stored nand page size. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-16Merge tag 'v2021.10-rc4' into nextTom Rini1-0/+1
Prepare v2021.10-rc4 Signed-off-by: Tom Rini <trini@konsulko.com> # gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # board/Arcturus/ucp1020/spl.c # cmd/mvebu/Kconfig # common/Kconfig.boot # common/image-fit.c # configs/UCP1020_defconfig # configs/sifive_unmatched_defconfig # drivers/pci/Kconfig # include/configs/UCP1020.h # include/configs/sifive-unmatched.h # lib/Makefile # scripts/config_whitelist.txt
2021-09-08common: Remove unused CONFIG_FIT_SHAxxx selectorsAlexandru Gagniuc1-0/+1
Originally CONFIG_FIT_SHAxxx enabled specific SHA algos for and only for hash_calculate() in common/image-fit.c. However, since commit 14f061dcb1 ("image: Drop IMAGE_ENABLE_SHAxxx"), the correct selector was changed to CONFIG_SHAxxx. The extra "_FIT_" variants are neither used, nor needed. Remove them. One defconfig disables FIT_SHA256, which is now changed to 'SHA256'. CMD_MVEBU_BUBT needs to select select SHA256 to avoid undefined references to "sha256_*()". bubt.c needs sha256, so this selection is correct. It is not clear why this problem did not manifest before. Note that SHA selection in SPL is broken for this exact reason. There is no corresponding SPL_SHAxxx. Fixing this is is beyond the scope of this change. Also note that we make CONFIG_FIT now imply SHA256, to make up for FIT_SHA256 previously being a default y option. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> [trini: Add imply SHA256 to FIT] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31Kconfig: Remove all default n/no optionsMichal Simek1-1/+0
default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-02global: Convert simple_strtoul() with hex to hextoul()Simon Glass2-3/+3
It is a pain to have to specify the value 16 in each call. Add a new hextoul() function and update the code to use it. Add a proper comment to simple_strtoul() while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-05-16cmd: mvebu: Rename rx_training to mvebu_comphy_rx_trainingStefan Roese3-11/+10
Rename the misleading cmd "rx_training" to "mvebu_comphy_rx_training" to avoid confusion and mixup with DDR3/4 training. This makes it clear, that this command is platform specific and handles the COMPHY RX training. Also depend this cmd on ARMADA_8K and not TARGET_MVEBU_ARMADA_8K to make is available for OcteonTX2 CN913x. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Pali Rohár <pali@kernel.org> Cc: Marek Behun <marek.behun@nic.cz> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Acked-by: Marek Behún <marek.behun@nic.cz> Acked-by: Pali Rohár <pali@kernel.org>
2021-04-29phy: marvell: add RX training commandIgal Liberman3-1/+65
This patch adds support for running RX training using new command called "rx_training" Usage: rx_training - rx_training <cp id> <comphy id> RX training allows to improve link quality (for SFI mode) by running training sequence between us and the link partner, this allows to reach better link quality then using static configuration. Change-Id: I818fe67ccaf19a87af50d4c34a9db7d6802049a5 Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Marcin Wojtas <mw@semihalf.com>
2021-04-29cmd/mvebu: fix the bubt commandKonstantin Porotchkin2-2/+2
- fix the dependency for MMC boot (add XENON to MVEBU_MMC) - fix the bubt destination assignment (missing # in "else" case) Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-02-08cmd: mvebu/bubt: Fix default options in helpPali Rohár1-3/+3
Default options depends on compile time defines. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-08-08Convert CONFIG_SYS_MMC_ENV_DEV et al to KconfigTom Rini1-4/+0
This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-06mvebu: bubt: Drop dead codeTom Rini1-15/+0
The code around CONFIG_SYS_MMC_ENV_PART has been untested since merge. This can be seen by it referencing 'mmc->part_num' which was migrated elsewhere prior to this code being merged. Cc: Joel Johnson <mrjoel@lixil.net> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-08-06cmd: mvebu/bubt: Drop unused SPI_FLASH_PROTECTIONJagan Teki1-7/+0
SPI_FLASH_PROTECTION config item is never used in anywhere in the U-Boot tree. Drop it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-05-18command: Remove the cmd_tbl_t typedefSimon Glass1-1/+1
We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop net.h from common headerSimon Glass1-0/+1
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop flash.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Fix up some style problems in flash.h while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-04cmd: mvebu: bubt: fix quoted string split across linesJoel Johnson1-2/+2
Update quoted string alignment to address checkpatch.pl warning originally introduced in commit f60a66ef5d7d ("cmd: mvebu: bubt: show image boot device"). Signed-off-by: Joel Johnson <mrjoel@lixil.net> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-22cmd: mvebu: bubt: show image boot deviceJoel Johnson1-1/+11
When a mismatch is found trying to write an image for one boot method to a different boot device, print an error message including the image header marked target boot device type. Signed-off-by: Joel Johnson <mrjoel@lixil.net> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-22cmd: mvebu: bubt: verify A38x target device typeJoel Johnson1-4/+48
Ensure that the device to which an image is being written includes header information indicating boot support for the destination device. This is derived from the support in the SolidRun master-a38x vendor fork. Signed-off-by: Joel Johnson <mrjoel@lixil.net> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-22cmd: mvebu: bubt: correct U-Boot spellingJoel Johnson1-3/+3
Replace "U-BOOT" text with correct spelling Signed-off-by: Joel Johnson <mrjoel@lixil.net> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-22cmd: mvebu: bubt: add A38x supportJoel Johnson1-1/+68
Add support for Armada 38x devices in bubt flashing utility. This is based on (and streamlined from) the support in the SolidRun master-a38x vendor fork. Signed-off-by: Joel Johnson <mrjoel@lixil.net> Reviewed-by: Stefan Roese <sr@denx.de>
2020-01-17common: Move the image globals into image.hSimon Glass1-0/+1
These three globals relate to image handling. Move them to the image header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17image: Rename load_addr, save_addr, save_sizeSimon Glass1-2/+4
These global variables are quite short and generic. In fact the same name is more often used locally for struct members and function arguments. Add a image_ prefix to make them easier to distinguish. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_get() to env.hSimon Glass1-0/+1
Move env_get() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini2-3/+2
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-12mmc: add a Kconfig option to enable the support for MMC write operationsJean-Jacques Hiblot1-1/+1
This allows using CONFIG_IS_ENABLED(MMC_WRITE) to compile out code needed only if write support is required. The option is added for u-boot and for SPL Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2017-08-16env: Rename getenv/_f() to env_get()Simon Glass1-1/+1
We are now using an env_ prefix for environment functions. Rename these two functions for consistency. Also add function comments in common.h. Quite a few places use getenv() in a condition context, provoking a warning from checkpatch. These are fixed up in this patch also. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-11cmd: mvebu: bubt: use get_nand_dev_by_index()Grygorii Strashko1-8/+6
As part of preparation for nand DM conversion the new API has been introduced to remove direct access to nand_info array. So, use it here instead of accessing to nand_info array directly. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2017-05-09arm64: mvebu: Fix the bubt comamnd NAND device supportKonstantin Porotchkin1-6/+7
Fix the NAND structures in bubt command according to latest changes in MTD API. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-01-25arm64: mvebu: Update bubt command MMC block device accessKonstantin Porotchkin1-3/+22
Update the MMC block device access code in bubt command implementation according to the latest MMC driver changes. Change-Id: Ie852ceefa0b040ffe1362bdb7815fcea9b2d923b Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com>
2016-12-12arm64: mvebu: Add bubt command for flash image burnKonstantin Porotchkin3-0/+827
Add support for mvebu bubt command for flash image load, check and burn on boot device. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit v1.1 at 2024-09-13 18:43:56 +0000