aboutsummaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)AuthorFilesLines
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass77-0/+78
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass257-2/+260
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18Fix some checkpatch warnings in calls to udelay()Simon Glass1-4/+4
Fix up some incorrect code style in calls to functions in the linux/time.h header, mostly udelay(). Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/stringify.h from common headerSimon Glass3-0/+3
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/bug.h from common headerSimon Glass2-0/+2
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop asm/ptrace.h from common headerSimon Glass2-0/+2
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass187-0/+189
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18Fix some checkpatch warnings in calls to debug()Simon Glass2-2/+2
Fix up some incorrect code style in calls to functions in the log.h header, mostly debug(). Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18command: Remove the cmd_tbl_t typedefSimon Glass97-152/+241
We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop init.h from common headerSimon Glass266-0/+266
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop image.h from common headerSimon Glass87-0/+92
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop bootstage.h from common headerSimon Glass10-0/+10
Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop part.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18part: Drop disk_partition_t typedefSimon Glass1-1/+1
We should not be using typedefs and these make it harder to use forward declarations (to reduce header file inclusions). Drop the typedef. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop net.h from common headerSimon Glass215-0/+218
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18arm: Don't include common.h in header filesSimon Glass13-0/+14
It is bad practice to include common.h in other header files since it can bring in any number of superfluous definitions. It implies that some C files don't include it and thus may be missing CONFIG options that are set up by that file. The C files should include these themselves. Update some header files in arch/arm to drop this. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop flash.h from common headerSimon Glass22-0/+23
Move this uncommon header out of the common header. Fix up some style problems in flash.h while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18flash: Tidy up coding style for flash functionsSimon Glass2-21/+22
Some functions use the wrong code style and generate checkpatch errors. Fix these. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-17configs: lx2160a: Add default config for lx2160a using StMM in OP-TEEIlias Apalodimas1-0/+1
Previous patches allow UEFI secure variables to be stored in an RPMB device using OPTEE. Add a config for the lx2160a hardware so the feature gets at least compiled. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Remove superfluous differences to lx2160ardb_tfa_defconfig. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-17efi_loader: round the memory area in efi_add_memory_map()Michael Walle1-2/+2
Virtually all callers of this function do the rounding on their own. Some do it right, some don't. Instead of doing this in each caller, do the rounding in efi_add_memory_map(). Change the size parameter to bytes instead of pages and remove aligning and size calculation in all callers. There is no more need to make the original efi_add_memory_map() (which takes pages as size) available outside the module. Thus rename it to efi_add_memory_map_pg() and make it static to prevent further misuse outside the module. Signed-off-by: Michael Walle <michael@walle.cc> Add missing comma in sunxi_display.c. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-15rename symbol: CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOODTrevor Woerner1-6/+6
Have this symbol follow the pattern of all other such symbols. This patch also removes a TODO from the code. Reviewed-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-14Merge tag 'u-boot-stm32-20200514' of ↵Tom Rini12-423/+733
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - stm32mp1: migrate MTD and DFU configuration in Kconfig - stm32mp1: add command stm32prog - stm32mp1: several board and arch updates - stm32mp1: activate data cache in SPL and before relocation - Many improvment for AV96 board and DHCOR SoM (add new defconfig, DDR3 coding on DHCOR SoM, split between board and SOM Synchronize DDR setttings on DH SoMs, setting for I2C EEPROM) - clk: stm32mp1: fix CK_MPU calculation - DT alignment of stm32mp1 device tree with Linux 5.7-rc2
2020-05-14Merge tag 'rpi-next-2020.07' of ↵Tom Rini2-1/+12
https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi - fix phy configuration for RPi4's bcmgenet - sync RPi4's env size with other RPi configs - add kconfig option to reserver more pages in the EFI mem map - add support for SDMA which is used by RPi4 - fix corner case boot bug for RPi3 32-bit
2020-05-14ARM: dts: stm32: Synchronize DDR setttings on DH SoMsMarek Vasut1-2/+6
Add custom DDR DRAM settings for the DHCOR and DHCOM SoMs and put them into use by the board file instead of the default ones. These new DRAM settings are a better fit for the SoMs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-14stm32mp1: Fix warning display when 1.5A power supply is usedPatrice Chotard1-1/+1
On DK1/2 board, when a 1.5A power supply is detected, a warning message is displayed. In this message, "1.5mA" is displayed instead of "1.5A". Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-14board: stm32mp1: add timeout for I/O compensation readyPatrick Delaunay1-4/+12
This patch avoids infinite loop when I/O compensation failed, it adds a 1s timeout to detect error. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14board: stm32mp1: remove bootdelay configuration for usb or serial bootPatrick Delaunay1-6/+0
It is not allowed to change the user setting of bootdelay, so remove the check of the boot-source to disable it dynamically in board_late_init() Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-14board: stm32mp1: set environment variable fdtfilePatrick Delaunay1-2/+11
For booting Linux in the generic distro mechanism and support of FDTDIR in extlinux.conf , cmd/pxe.c retrieves the FDT file name from "fdtfile" environment variable. Dynamically build this variable with compatible of STMicroelectronics boards. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14board: stm32mp1: gt9147 IRQ before reset on EV1Patrick Delaunay1-0/+35
Software workaround for I2C issue on EV1 board, configure the IRQ line for touchscreen before LCD reset to fix the used I2C address. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14board: stm32mp1: update management of boot-ledPatrick Delaunay1-17/+16
Force boot-led ON and no more rely on default-state. This patch avoid device-tree modification for U-Boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-14board: stm32mp1: Keep error led ON in case of low power detectionPatrice Chotard1-0/+1
Since commit commit dd2810851eb1 ("stm32mp1: board: support of error led on ed1/ev1 board") the attended behavior was no more respected in case of low power source detection on DK2. The expected behavior is either the error LED keeps blinking for ever, or blinks 2 or 3 times and must stay ON. Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-14stm32mp: stm32prog: adapt the MTD partitionsPatrick Delaunay1-2/+12
Dynamically adapt the MTD partitions in NOR/NAND/SPI-NAND when stm32prog command detects in the parsed flash layout files: - a fsbl partition in NOR. - a tee partition in NOR/NAND/SPI-NAND Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14stm32mp: add the command stm32progPatrick Delaunay1-0/+20
Add a specific command stm32prog for STM32MP soc family witch allows to program the boot devices with the tool STM32CubeProgrammer (http://www.st.com/STM32CubeProg). This command uses the same UART STM32 protocol than MCU STM32 with or USB with DFU protocol v1.1 (ithe MCU ST extension are no supported). The executed actions are based on a tab separated value file with a stm32 header, the FlashLayout file (https://wiki.st.com/stm32mpu/wiki/STM32CubeProgrammer_flashlayout). This file is parsed by the U-Boot command to: - initialize the devices - create the partition table on each device - initialize the DFU backend to access to not volatile memory (NOR/NAND/SD/eMMC) or to virtual device (OTP/PMIC) Up to STM32PROG_MAX_DEV (5) devices can be updated with a FlashLayout. The communication between U-Boot and STM32CubeProgrammer is done with the specific alternate configuration (see "AN5275: USB DFU/USART protocols used in STM32MP1 Series bootloaders" for details). The command stm32prog is executed when a boot from USB is detected (selected with bootpins) and we can program the boot devices with a simple command (on Windows or Linux): PC $> STM32_Programmer_CLI -c port=usb1 -w flaslayout.tsv 1/ the ROM code loads TF-A in embedded RAM (DFU or uart) 2/ TF-A loads flashlayout file and U-Boot in DDR (DFU or uart) 3/ U-Boot executes the stm32prog command (DFU or uart) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14board: stm32mp1: adapt MTD partition for BOOT from NOR or NANDPatrick Delaunay1-21/+60
Dynamically adapt the MTD partitions in NAND and SPI-NAND when boot from NOR or NAND/SPI-NAND is detected. This patch avoids to define the save MTD partition name for NOR and NAND devices and issue with latest kernel: only the needed MTD partitions are defined. For boot from NOR 1/ bootloader (TF-A, U-Boot and OP-TE) in NOR 2/ one large UBI partition in NAND For boot from NAND 1/ bootloader (TF-A, U-Boot and OP-TE) in MTD raw partition 2/ one large UBI partition Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14board: stm32mp1: support boot from spi-nandPatrick Delaunay1-0/+2
Manage BOOT_FLASH_SPINAND, with boot_device="spi-nand" and treat this value in bootcmd_stm32mp. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14configs: stm32mp1: remove optee defconfigPatrick Delaunay1-1/+0
As the op-tee presence is detected by U-boot, the stm32mp15_optee_defconfig is identical to stm32mp15_trusted_defconfig and can be removed. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14stm32mp1: dynamically detect op-tee presencePatrick Delaunay3-8/+6
Activate OP-TEE driver for trusted and optee defconfig. This driver allows detection of TEE presence for boot from flash; CONFIG_STM32MP1_OPTEE is also removed. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14stm32mp1: move MTDPART configuration in KconfigPatrick Delaunay2-46/+104
This patch reduces the stm32mp1 environment size and builds dynamically the MTD partitions with information from defconfig (CONFIG_MTDPARTS_...). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14stm32mp1: dynamically build DFU_ALT_INFOPatrick Delaunay3-28/+110
This patch reduces the stm32mp1 environment size and builds dynamically the DFU board configuration with gpt and mtd partitions and information from defconfig (CONFIG_DFU_ALT_RAM0). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14board: stm32mp1: move set_dfu_alt_info in st common directoryPatrick Delaunay5-195/+154
Move the stm32mp1 common code set_dfu_alt_info() in common directory, this patch reduce the maintenance effort on this generic part (not board dependent). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14board: stm32mp1: move board_get_mtdparts in st common directoryPatrick Delaunay5-191/+120
Move the stm32mp1 common code board_get_mtdparts() in common directory, this patch reduce the maintenance effort on this generic part (not board dependent). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14ARM: stm32: Implement DDR3 coding on DHCOR SoMMarek Vasut1-1/+25
The DHCOR board does exist in multiple variants with different DDR3 DRAM sizes. To cater for all of them, implement DDR3 code handling. There are two GPIOs which code the DRAM size populated on the SoM, read them out and use the value to pick the correct DDR3 config. Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com>
2020-05-14ARM: stm32: Implement board coding on AV96Marek Vasut4-1/+140
The AV96 board does exist in multiple variants. To cater for all of them, implement board code handling. There are two GPIOs which code the type of the board, read them out and use the value to pick the correct device tree from an fitImage. Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Change-Id: Iddb330b9a66500495885457cbe17edc0eacaaf43
2020-05-14ARM: stm32: Add default config for DHCORMarek Vasut1-0/+1
Add default U-Boot configuration for the DHCOR SoM on AV96 board. Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com>
2020-05-13ARC: HSDK: anounce state of BIM switchEugeniy Paltsev1-0/+7
Anounce state of BIM switch which defines if U-boot is loaded and started by preloader or not. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13rpi: use the newly-added RPI_EFI_NR_SPIN_PAGESKyle Evans1-1/+2
Some systems may use a slightly larger stub to do PSCI for booting the RPi family. The number of pages has been made configurable so that operating systems building U-Boot for use in these kinds of environments can reserve more memory in the EFI memory map. Signed-off-by: Kyle Evans <kevans@FreeBSD.org> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-13rpi: Kconfig option for initial page reservationKyle Evans1-0/+10
While the nearly-universal default for the Raspberry Pi family is to use spin tables and the spin table implementation provided by the Raspberry Pi Foundation, FreeBSD and others may use a PSCI implementation instead. Accommodate these setups by allowing them to configure for more than one page to be reserved in the initial reservation. The default reservation remains as one page. Signed-off-by: Kyle Evans <kevans@FreeBSD.org> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-11Merge tag 'ti-v2020.07-rc2' of ↵Tom Rini5-23/+40
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Fix boot issues on Nokia RX-51 - Configure AM6 CPSW for 10Mbps in rgmii mode. - Minor changes for J721e
2020-05-11Nokia RX-51: Remember setup_console_atag optionPali Rohár1-4/+19
When variable setup_console_atag is unset then read default value from OMAP atags which passed NOLO bootloader to U-Boot. This would allow to boot Maemo Linux kernel from U-Boot with serial console settings configured in NOLO bootloader (which loads U-Boot). So serial console needs to be enabled only at one place, globally in NOLO. Signed-off-by: Pali Rohár <pali@kernel.org>
2020-05-11Nokia RX-51: Remove PART* macrosPali Rohár1-12/+6
Now when code for defining partitions is duplicated at two locations (option CONFIG_MTDPARTS_DEFAULT in nokia_rx51_defconfig file and macro OMAP_TAG_PARTITION_CONFIG in rx51.c file) there is no need to have common macros. Lets inline PART* macros to rx51.c file. Signed-off-by: Pali Rohár <pali@kernel.org>
generated by cgit v1.1 at 2024-11-11 20:44:18 +0000