aboutsummaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)AuthorFilesLines
2021-01-05x86: apl: Reduce size for TPLSimon Glass1-1/+3
Update various drivers to use of_match_ptr() and to avoid including debug strings in TPL. Omit the WiFi driver entirely, since it is not used in TPL. This reduces the TPL binary size by about 608 bytes. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05serial: Rename ns16550 functions to lower caseSimon Glass14-25/+26
Lower case should be used for function names. Update this driver and its callers accordingly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-01-05serial: Update NS16550_t and struct NS16550Simon Glass14-29/+29
Typedefs should not be used in U-Boot and structs should be lower case. Update the code to use struct ns16550 consistently. Put a header guard on the file while we are here. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-12-31efi: capsule: Add support for uefi capsule authenticationSughosh Ganu2-0/+49
Add support for authenticating uefi capsules. Most of the signature verification functionality is shared with the uefi secure boot feature. The root certificate containing the public key used for the signature verification is stored as part of the device tree blob. The root certificate is stored as an efi signature list(esl) file -- this file contains the x509 certificate which is the root certificate. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2020-12-31qemu: common: Set dfu_alt_info variable for the platformSughosh Ganu3-0/+70
The dfu framework uses the dfu_alt_info environment variable to get information that is needed for performing the firmware update. Add logic to set the dfu_alt_info for the qemu arm64 platform to reflect the two mtd partitions created for the u-boot env and the firmware image. This can be subsequently extended for other qemu architectures which need this variable set. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2020-12-31qemu: common: Add support for dynamic mtdparts for the platformSughosh Ganu4-0/+107
Add support for setting the default values for mtd partitions on the platform. This would be used for updating the firmware image using uefi capsule update with the dfu mtd backend driver. Currently, values have been defined for the qemu arm64 platform, with default values defined for the mtd partitions based on the NOR flash. This can be subsequently extended for other qemu architectures which need mtdparts set. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2020-12-31qemu: arm: Initialise virtio devices in board_late_initSughosh Ganu1-0/+5
On the qemu arm platform, the virtio devices are initialised in the board_init function, which gets called before the initr_pci. With this sequence, the virtio block devices on the pci bus are not initialised. Move the initialisation of the virtio devices to board_late_init which gets called after the call to initr_pci. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2020-12-22sandbox: implement invalidate_icache_all()Heinrich Schuchardt1-4/+0
Before executing code that we have loaded from a file we need to flush the data cache and invalidate the instruction flash. Implement functions flush_cache() and invalidate_icache_all(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-18dm: Avoid accessing seq directlySimon Glass2-12/+12
At present various drivers etc. access the device's 'seq' member directly. This makes it harder to change the meaning of that member. Change access to go through a function instead. The drivers/i2c/lpc32xx_i2c.c file is left unchanged for now. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename ..._platdata variables to just ..._platSimon Glass25-45/+45
Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename ofdata_to_platdata() to of_to_plat()Simon Glass1-1/+1
This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename dev_get_platdata() to dev_get_plat()Simon Glass1-1/+1
Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename 'platdata' variables to just 'plat'Simon Glass26-36/+36
We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename auto_alloc_size members to be shorterSimon Glass1-1/+1
This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-04board: sl28: add OP-TEE Trusted OS support (bl32)Michael Walle2-0/+30
Add support to load the OP-TEE Trusted OS by the SPL. Signed-off-by: Michael Walle <michael@walle.cc>
2020-12-04board: sl28: add ATF support (bl31)Michael Walle3-1/+69
Add support to load the bl31 part of the ARM Trusted Firmware by the SPL. Signed-off-by: Michael Walle <michael@walle.cc>
2020-12-01km/arm: coding style clean upHolger Brunck4-92/+93
Address most of the checkpatch issues we found in km_arm and common km code. CC: Stefan Roese <sr@denx.de> CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-11-28riscv: sifive/fu540: kconfig: Enable support for Opencores I2C controllerPragnesh Patel1-0/+1
Enable support for SiFive FU540 Opencores I2C master controller. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-11-25board: st: stm32mp1: update load address for FIT examplesPatrick Delaunay2-5/+19
Update kernel load address for FIT examples to avoid relocation: - Kernel example uses Image.gz with U-Boot gzip decompression at final kernel location 0x0xC0008000. - Copro example loads zImage at a correct location (0xC4000000), to avoid zImage relocation before decompression by kernel code. An other solution to avoid zImage relocation is to align the kernel load and entry address with the real location in FIT (the relocation of zImage is skipped in U-Boot bootm command for identical address) but it is less flexible because this offset depends on FIT content: For example: ## Loading kernel from FIT Image at c2000000 ... Using 'ev1' configuration Trying 'kernel' kernel subimage Description: Linux kernel Created: 2020-10-22 9:08:32 UTC Type: Kernel Image Compression: uncompressed Data Start: 0xc20000cc The kernel offset in FIT is 0xCC in FIT and zImage is decompressed at 0xC0008000 by kernel code: kernel { description = "Linux kernel"; data = /incbin/("zImage"); type = "kernel"; arch = "arm"; os = "linux"; compression = "none"; load = <0xC20000cc>; entry = <0xC20000cc>; hash-1 { algo = "sha1"; }; }; Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-25board: stm32mp1: no MTD partitions fixup for serial bootPatrick Delaunay1-3/+8
Remove the update of the MTD partitions in kernel device tree for serial boot (USB / UART), and the kernel will use the MTD partitions define in the loaded DTB because U-Boot can't known the expected flash layout in this case. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-25ARM: dts: stm32: Add DHCOM based PicoITX boardMarek Vasut1-0/+22
Add DT for DH PicoITX unit, which is a bare-bones carrier board for the DHCOM. The board has ethernet port, USB, CAN, LEDs and a custom board-to-board expansion connector. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-20fru: common: Record pcie/uuid fields in custom board areaMichal Simek1-0/+4
Add additional fields. They will be just recorded and filled but not shown. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20fru: ops: Do not let parser to write data to not allocated spaceMichal Simek1-1/+7
If customs fields in board area are used it will likely go over allocated space in struct fru_board_data. That's why calculate limit of this structure to make sure that different data is not rewritten by accident. When limit is reached stop to record fields. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20fru: common: Switch capture variable with the restMichal Simek2-2/+2
capture variable is bool which is just one byte and it is just causing unaligned accesses. Better to have it as last entry in the structure. It also simplify offset calculation for initial header copy. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20microblaze: Get rid of xparameters.hMichal Simek1-18/+0
There is no need to use this file anymore. Include it in main config file and simplify logic based on it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-19km/ppc: use Kconfig for MEMTEST configurationHolger Brunck2-6/+8
Also change back SYS_MEMTEST_END to 0x00f00000. 0xe00000 was wrong and introduced due to the global Kconfig migration of this option in u-boot. CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
2020-11-19km: replace hardcoded address for imported environmentMatteo Ghidoni8-8/+8
Instead of using an hard coded address, make use of an already defined address for importing the environment for ramfs and nfs boot. This allows boards having different mapping to use the same code. CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: Matteo Ghidoni <matteo.ghidoni@hitachi-powergrids.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
2020-11-19arm: vexpress: don't reset flags in board_init to avoid losing previous onesArnaud Aujon Chevallier1-1/+0
Re-submitted because of missing description and signed-off. flags reset in board_init caused bugs when executing command like editenv because the reallocated flag was lost. Tested-by: Michael Opdenacker <michael.opdenacker@bootlin.com> Signed-off-by: Arnaud Aujon Chevallier <arnaud@intelibre.fr>
2020-11-17Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvWIP/17Nov2020Tom Rini1-19/+26
- Enable SATA disk on QEMU RISC-V and update doc. - k210 pinctrl updates: - Fix inverted IE and OE for I2C. - Rename power domains to match datasheet.
2020-11-17riscv: enable SATA disk on QEMU RISC-VHeinrich Schuchardt1-0/+7
Allow attaching a virtual SATA disk to QEMU RISC-V by implying AHCI, AHCI_PCI, CMD_SCSI, DM_SCSI, PCI_INIT_R, SCSI, SCSI_AHCI. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-11-17riscv: sort SPECIFIC_OPTIONSHeinrich Schuchardt1-19/+19
Sort implied options in BOARD_SPECIFIC_OPTIONS in the same sequence as in .config. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-11-17sunxi: allow to use AXP20[39] attached to I2C0 on V3 seriesIcenowy Zheng1-0/+4
The reference design of Allwinner V3 series uses an AXP203 or AXP209 PMIC attached to the I2C0 bus of the SoC, although the first community-available V3s board, Lichee Pi Zero, omitted it. Allow to introduce support for the PMIC on boards with it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-17sunxi: a64: Add a defconfig for the PinePhoneSamuel Holland1-0/+5
The PinePhone is a smartphone produced by Pine64, with an A64 SoC, 2 or 3 GiB LPDDR3 RAM, 16 or 32 GiB eMMC, 720x1440 MIPI-DSI panel, and Quectel EG25-G modem. There are two main board revisions: 1.1 for early adopters, and 1.2 for mass production. Since there is code to detect the board revision at boot, one config/image can support both boards. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-11-17sunxi: board: Set fdtfile to match the DT chosen by SPLSamuel Holland1-2/+11
Previously, fdtfile was always the value in CONFIG_DEFAULT_DEVICE_TREE. This meant that, regardless of the DT chosen by SPL (either by changing the header in the image or by the selection code at runtime), Linux always used the default DT. By using the name from the SPL header (which, because of the previous commit, always matches the DT used by U-Boot proper), Linux also sees the same board as U-Boot/SPL, even if the boot script later loads a DT from disk. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [Andre: remove no longer needed CONFIG_SPL_LOAD_FIT guards] Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-11-17sunxi: board: Save the chosen DT name in the SPL headerSamuel Holland1-1/+27
This overwrites the name loaded from the SPL image. It will be different if there was previously no name provided, or if a more accurate name was determined by the board variant selection logic. This means that the DT name in the SPL header now always matches the DT appended to U-Boot. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [Andre: move function under CONFIG_SPL_LOAD_FIT guard] Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-11-17sunxi: board: Add PinePhone DT selection logicSamuel Holland1-0/+21
There are two different publicly-released revisions of the PinePhone hardware, versions 1.1 and 1.2; and they need different device trees. Since some GPIO pins were rerouted, we can use that to distinguish between them. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-17sunxi: board: Simplify Pine A64 DT selection logicSamuel Holland1-8/+4
Instead of using an entirely separate matching algorithm, simply update the name of the DT we want to match. Enabling this logic does not depend on the FIT config name, only on the initial guess of the board name. Importantly, the initial guess must be "sun50i-a64-pine64-plus", because otherwise the logic would trigger when "sun50i-a64-pine64-lts" was written to the SPL header. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-17sunxi: board: Add a helper to get the SPL DT nameSamuel Holland1-9/+19
This moves the validity checking and typecasts all to one place away from the string comparison logic, and it detangles the compile-time and runtime control flow. The new helper will also be used by U-Boot proper in a future commit. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [Andre: protect new function with CONFIG_SPL_LOAD_FIT] Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-11-17sunxi: board: Use a more descriptive variable nameSamuel Holland1-6/+6
The variable "cmp_str" always leaves me wondering if it is the DT name of the current board (yes) or DT name in the FIT config entry (no). In preparation for expanding the functionality here, rename it to something that obviously means "this is the DT name we are looking for". Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-16Merge tag 'ti-v2021.01-rc3' of ↵Tom Rini3-8/+49
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Fix Nokia RX-51 boot issues - Fix CONFIG_LOGLEVEL on K3 devices - Add phyBOARD REGOR support
2020-11-15Nokia RX-51: Make onenand workingIvaylo Dimitrov2-0/+22
set_gpmc_cs0() sets wrong timings and size for Nokia N900 onenand flash. Fix that by setting the correct timings and size from the board code Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Tested-by: Pali Rohár <pali@kernel.org>
2020-11-15Nokia RX-51: During init disable lp5523 led instead of resetting itPali Rohár1-2/+2
After commit d5243359e1af ("OMAP24xx I2C: Add support for set-speed") U-Boot is unstable to reset lp5523 led. That commit added pooling for i2c poll ARDY bit which apparently is never set. It is not known what is happening here. Purpose of resetting lp5523 led in Nokia RX-51 code is just to turn off very bright led which is powered on by NOLO and expects next boot image (kernel or U-Boot) to turn it off. After testing we observed that just disabling lp5523 led is working fine. So as a workaround to this ARDY bit i2c issue we disable lp5523 led instead of resetting it. Signed-off-by: Pali Rohár <pali@kernel.org> Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
2020-11-15Nokia RX-51: Fix crashing in U-Boot mmc function omap_hsmmc_stop_clock()Pali Rohár1-0/+2
After commit 04a2ea248f58 ("mmc: disable UHS modes if Vcc cannot be switched on and off") U-Boot started crashing on Nokia RX-51 while initializing mmc and caused reboot loop. It looks like that some clocks were not enabled and this patch fixes U-Boot mmc crash. Signed-off-by: Pali Rohár <pali@kernel.org> Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
2020-11-15Nokia RX-51: Convert to CONFIG_DM_I2CPali Rohár1-6/+19
Use twl4030_i2c_read(), i2c_get_chip_for_busnum() and remove CONFIG_SYS_I2C. Signed-off-by: Pali Rohár <pali@kernel.org>
2020-11-15ARM: am335x: Add phyBOARD REGOR supportParthiban Nallathambi1-1/+5
phyBOARD-REGOR is based on phyCORE AM335x R2 SoM (PCL060). CPU : AM335X-GP rev 2.1 Model: Phytec AM335x phyBOARD-REGOR DRAM: 512 MiB NAND: 512 MiB MMC: OMAP SD/MMC: 0 eth0: ethernet@4a100000 Working: - Eth0 - i2C - MMC/SD - NAND - UART - USB (host) Device trees were taken from Linux mainline: commit c4d6fe731176 ("Linux 5.9.0") Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-11-13rockchip: gru: Allow setting up clocks in U-Boot properAlper Nebi Yasak1-0/+23
Commit fe974716326c ("rockchip: rk3288: Allow setting up clocks in U-Boot proper") fixes some clock issues when chainloading U-Boot on rk3288 chromebooks. Part of that change is still available in veyron's board_early_init_r() function. Since chain-loading U-Boot proper from vendor firmware is possible on gru boards as well, do the same thing for them too. On rk3399, this needs to detect whether SPL was run via handoff, so enable that and bloblist kconfigs it needs for chromebook_bob. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-11-10x86: coral: Correct max98357 fileSimon Glass1-0/+0
This somehow ended up as an empty file. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-06Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini5-39/+78
- Add a new SMBIOS parser and enable it when booting from coreboot - Fix up various driver names to avoid dtoc warnings - Fully enable ACPI support on Google Chromebook Coral - Add a way to set SMBIOS properties using the devicetree - Update existing boards to use devicetree for SMBIOS using a new default sysinfo driver
2020-11-06x86: galileo: Use devicetree for SMBIOS settingsSimon Glass1-11/+0
Add settings and enable the default sysinfo driver so that these can come from the device tree. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-06board: Rename uclass to sysinfoSimon Glass3-28/+33
This uclass is intended to provide a way to obtain information about a U-Boot board. But the concept of a U-Boot 'board' is the whole system, not just one circuit board, meaning that 'board' is something of a misnomer for this uclass. In addition, the name 'board' is a bit overused in U-Boot and we want to use the same uclass to provide SMBIOS information. The obvious name is 'system' but that is so vague as to be meaningless. Use 'sysinfo' instead, since this uclass is aimed at providing information on the system. Rename everything accordingly. Note: Due to the patch delta caused by the symbol renames, this patch shows some renamed files as being deleted in one place and created in another. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit v1.1 at 2024-11-11 09:04:42 +0000