aboutsummaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)AuthorFilesLines
2019-04-18Merge tag 'arc-for-2019.07' of git://git.denx.de/u-boot-arcTom Rini2-64/+6
In this small series we migrate ARC boards to DM_MMC so we're hopefully are good now and our boards will be kept in U-Boot for some more time :)
2019-04-18ARC: [plat-axs10x]: migrate to DM_MMCEugeniy Paltsev1-29/+0
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-04-18ARC: [plat-hsdk]: migrate to DM_MMCEugeniy Paltsev1-35/+6
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-04-17arm: am57xx: cl-som-am57x: remove board supportUri Mashiach7-672/+0
U-Boot support for the CL-SOM-AM57x module is no longer required. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2019-04-17Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini3-145/+0
- Convert DM_MMC and DM_SCSI - A20, R40, H6 Linux dts(i) sync - CLK, RESET support for sunxi, sun8_emac net drivers
2019-04-17Merge tag 'xilinx-for-v2019.07' of git://git.denx.de/u-boot-microblazeTom Rini2-7/+22
Xilinx/FPGA changes for v2019.07 fpga: - Add support for external data in FIT - Extend testing for external data case - Inform user about a need to run post config on Zynq arm: - Tune zynq command functions - Fix internal variable setting arm64: - Add support for zc39dr decoding - Disable WDT for zcu100 - Small changes in reset_reason() - Some DT changes (spi) - Tune qspi-mini configuration - Remove useless eeprom setting - Fix two sdhci boot case spi: - Fix tap delay programming clk: - Enable i2c in SPL net: - Fix gem phydev handling - Remove phy detection code from gem driver general: - Correct EXT_DTB usage for MULTI_DTB_FIT configuration
2019-04-17sunxi: update SATA driver to always use DM_SCSIAndre Przywara2-138/+0
It seems like the Allwinner SATA driver is already quite capable of using the driver model, so we can force this on all boards and can remove support for a non-DM_SCSI build. This removes the warning about boards with SATA ports not being DM_SCSI compliant. It also takes the opportunity to move the driver out of the board/sunxi directory to join its siblings in drivers/ata, and to make it a proper Kconfig citizen. The board defconfigs stay untouched. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> [jagan: select DM_SCSI separately] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17board: sunxi: Add R40 sata compatibleJagan Teki1-0/+1
Add sata compatible for R40. Cc: Pablo Sebastián Greco <pgreco@centosproject.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-16board: sunxi: gmac: Remove Ethernet clock and resetJagan Teki1-8/+0
Since Ethernet clock and reset is now handling via CLK and RESET frameworks via driver API's remove explicit ccm writes. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-16arm64: zynqmp: Add idcode for new RFSoC silicon ZU39DRSiva Durga Prasad Paladugu1-0/+4
This patch adds "zu39dr" to the list of zynqmp devices The zu39DR is the new RFSoC silicon with id value of 0x66. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16ARM: zynq: Check zynq aes & rsa command parameters countT Karthik Reddy1-1/+8
This patch checks for zynq aes & rsa commands max parameters count. Also checks minimum number of parameters count for aes command. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16arm64: zynqmp: Use zynqmp_mmio_read/write functionsT Karthik Reddy1-6/+10
Changed the return type of reset_reason() to int from u32, because zynqmp_mmio_read/write() returns signed value on error. Replaced readl and writel functions with zynqmp_mmio_read & zynqmp_mmio_write functions to access RESET_REASON(CRL_APB) registers. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-15Merge tag 'u-boot-imx-20190415' of git://git.denx.de/u-boot-imxTom Rini36-2152/+1064
Move to DM ----------- - DM support in sata - Toradex Board to DM - wandboard to DM - tbs2910 to DM - GE boards to DM - VHybrid boards to DM - DM_VIDEO for i.MX
2019-04-14Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini1-1/+1
Conflicts: arch/arm/dts/armada-385-amc.dts arch/arm/dts/armada-xp-theadorable.dts arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-13imx: aristainetos: fix build breakageAnatolij Gustschin1-1/+1
ipu.h header is not found since the ipuv3 driver was moved to the drivers/video/imx subdirectory. Fix it. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13tdx-cfg-block: fix off by one issueMarcel Ziswiler1-1/+1
Fix toradex_modules array off by one issue potentially leading to spurious printout during boot e.g. Model: Toradex V1.2A, instead of Model: Toradex UNKNOWN MODULE V1.2A. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13toradex: common: unify behaviour when config block is missingBhuvanchandra DV1-16/+18
If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13toradex: configblock: add an -y parameter to 'cfgblock create’Dominik Sliwa1-13/+26
Add an optional -y parameter to 'cfgblock create’ to simplify automation. Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Acked-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13colibri_vf: use leveling evaluated by DDR validation toolsStefan Agner1-0/+7
The DDR validation tool (which is part of Processor Expert) allows to evaluate leveling parameters for CR105/CR106/CR110. Several runs have been made with Colibri VF50 and VF61 and it seems to evaluate very similar values. Use this values by default. Note: The newly evaluated parameters seem to require CTLUPD_AREF to be enabled! Note 2: The tool also evaluated 6 as a new value for PHY02/18 GATE_CFG (Coarse adjust of gate open time). However, this seems not to work in practise. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri_vf: adjust timing according to data sheetStefan Agner1-3/+9
Using the DDR Validation tool in Processor Expert uncovered two timing inconsistencies. Since those timings are related to the suspend mode they do not affect or change regular memory behaviour. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13colibri_vf: sync the board info messageBhuvanchandra DV1-2/+2
Use similar info message as on other modules. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13colibri_vf: migrate fec, esdhc, nfc and usb to driver modelMarcel Ziswiler1-81/+1
Migrate FEC, ESDHC, NFC and USB to driver model. While at it also do no longer enable optional I2C clock in board file as the generic clock code now handles this. Note for space reason and as it is not required just for booting we do not enable I2C in U-Boot by default. While at it also update copyright period. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13colibri_vf: migrate pinctrl and regulators to dtb/dmMarcel Ziswiler1-128/+11
Migrate pinctrl and regulators to device tree resp. driver model: DDR, DSPI, ENET, ESDHC, I2C, NFC and UART. Enable CMD_DM, PINCTRL and DM_REGULATOR. While at it also update copyright period and sort include files. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13ARM: dts: colibri_vf: update device treesMarcel Ziswiler1-1/+3
Update device tree in preparation of further driver model migration: Ethernet FEC, ESDHC aka MMC/SD card, I2C, NFC aka NAND flash controller, USBH_PEN GPIO regulator. Add iomux resp. pinctrl entries to be removed from proprietary platform data: DSPI, ESDHC, FEC, I2C, NFC, UART, USBH_PEN GPIO. Introduce a U-Boot specific device tree with some required u-boot,dm-pre-reloc properties: soc, aips0, pinctrl_ddr and uart0 incl. pinctrl. While at it also update the MAINTAINERS file. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13Add missing space in commentMarcel Ziswiler1-1/+1
Spotted two missing spaces in comments. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13imx6: wandboard: convert to DM_MMCAnatolij Gustschin2-97/+92
Move SDHC init to SPL code since it is not required with DM_MMC. Enable DM_MMC support. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13imx6: wandboard: convert to DM_I2CAnatolij Gustschin1-5/+18
Allow building with DM_I2C enabled. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13imx6: wandboard: convert to DM_PMICAnatolij Gustschin1-16/+22
Enable DM_PMIC_PFUZE100 driver and add PMIC description to DTS. Rework power_init_board() code. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13imx6: wandboard: convert to DM_GPIO and enable pinctrl driverAnatolij Gustschin1-0/+12
Enable DM_GPIO and pinctrl in defconfig and add gpio_request() calls where required. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13imx6: wandboard: add device treeAnatolij Gustschin1-0/+3
Add device trees from Linux in preparation for driver model conversions. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13board: tbs2910: Convert mmc to driver modelSoeren Moch1-108/+0
So we don't need to duplicate settings from the device tree in the board file. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13board: tbs2910: Convert sata to ahci driver modelSoeren Moch1-4/+0
While at it, also configure 64-bit LBA support. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13board: tbs2910: Convert i2c and rtc to driver modelSoeren Moch1-57/+0
So we don't need to duplicate settings from the device tree in the board file. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13board: tbs2910: Convert usb to driver modelSoeren Moch1-10/+0
So we don't need to duplicate settings from the device tree in the board file. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13board: tbs2910: Add pinctrl driver and convert gpio to driver modelSoeren Moch1-0/+3
We need this for additional driver model conversions. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13board: tbs2910: Add device treeSoeren Moch2-6/+1
... as preparation for additional driver model coonversions. We use CONFIG_OF_EMBED here to keep u-boot.imx as final binary name. So we maintain compatibility with the original TBS u-boot and available HOWTOs for u-boot updates. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13board: colibri_imx6: check for and report ecc errors in fusesGerard Salvatella2-2/+108
The PMIC on the Colibri iMX6 may have ECC errors in fuses that will prevent correct settings. Up to one bit error per fuse bank can be reported and corrected by the ECC logic. Two bit errors can only be reported. Signed-off-by: Gerard Salvatella <gerard.salvatella@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri_imx6: added nreset gpio on rebootGerard Salvatella1-0/+24
RGMII_RD1 pin (active high, GPIO6_IO27) is triggered on reboot during the SPL phase. This asserts (active low) nReset_Out from the PMIC. Only V1.1 and later Colibri iMX6 modules implement this in hw. Previous versions do not use this pin, so it is safe to leave it enabled at all times. Signed-off-by: Gerard Salvatella <gerard.salvatella@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri_imx6: use SDP if USB serial downloader has been usedStefan Agner1-1/+9
In case USB serial downloader has been used to load U-Boot start the serial download protocol (SDP) emulation. This allows to download complete images such as Toradex Easy Installer over USB SDP as well. This code uses the boot ROM provided boot information to reliably detect USB serial downloader. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13toradex: colibri_imx6: overwrite CMA memory set in device treeBhuvanchandra DV1-1/+13
Make sure CMA memory is not greater than 50% of available physical memory. Allow user to change the CMA memory via 'cma-size' U-Boot environment variable. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri_imx6: revert fuse value set in mfgr_fuseMax Krummenacher1-1/+1
We have two commands to change the bootmode fuses: mfgr_fuse which set fuse 0/5 and 0/6 and updt_fuse which burns bit 4 of 0/5. Before Image 2.6 we fused in mfgr_fuse 0x5062, which boots from the user partition of the eMMC. To workaround certain hangs we moved to fastboot mode and using the first bootpartition of the eMMC requiring a fuse value of 0x5072 which could be achived by the then added updt_fuse command. At the same time the mfgr_fuse command was changed to also fuse 0x5072, revert that second change so that one can fuse both values, one with just mfgr_fuse and the later with mfgr_fuse;updt_fuse. Note that the mfgr_fuse command is only needed at module production time, a customer might need to use updt_fuse when upgrading an older module to be compatible with a newer image. The command is integrated into the image update scripts. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri_imx6: change pmic fusing according to hw 1.1 requirementsMax Krummenacher1-7/+9
Colibri iMX6 V1.1 HW can use the PMIC GEN3 to power the NVCC_SD1. Change the settings fused into the PMIC's OTP to powerup with GEN3 set to output 3.3V. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri imx6: disable ri and dcd irq in uartsMax Krummenacher1-1/+8
If the UART is used in DTE mode the RI and DCD bits in UCR3 become irq enable bits. Both are set to enabled after reset and both likely are pending. Disable the bits also on UARTs not used in the boot loader to prevent an interrupt storm when Linux enables the UART interrupts. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri imx6: pf0100: reorder and cleanup message printingMax Krummenacher1-41/+41
Keep debug code at the end of the function. Use a one line informational message for the PMIC only. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri_imx6: unify sd/mmc drive strenght with linux kernel settingsMax Krummenacher1-10/+14
In the linux device tree we use 40Ohm drive strenght. So use the same value in U-Boot. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri_imx6: print also 64-bit ITMax Krummenacher1-0/+1
Print also for Colibri iMX6 512MB IT with 64-bit RAM bus. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri_imx6: drop CONFIG_OF_SYSTEM_SETUPMax Krummenacher1-7/+0
This doesn't do anything anymore, probably never did. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri_imx6: migrate usb to using driver modelMarcel Ziswiler1-22/+1
Migrate USB to using driver model. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri_imx6: migrate mmc to using driver modelMarcel Ziswiler1-34/+4
Migrate MMC to using driver model. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri_imx6: migrate i2c to using driver modelMarcel Ziswiler2-73/+31
Migrate I2C to using driver model. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
generated by cgit v1.1 at 2024-10-12 03:26:58 +0000