aboutsummaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)AuthorFilesLines
2022-04-25nds32: Remove the architectureWIP/25Apr2022Tom Rini8-230/+0
As removal of nds32 has been ack'd for the Linux kernel, remove support here as well. Cc: Rick Chen <rick@andestech.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2022-04-22Merge tag 'u-boot-imx-20220422' of ↵Tom Rini36-1504/+2651
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20220422 ------------------- - Switch to DM_SERIAL - Drop MMCROOT - several cleanup CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/11815
2022-04-21imx8mm-cl-iot-gate: Remove redundant board_fix_fdt()Ying-Chun Liu (PaulLiu)1-5/+0
In arch/arm/mach-imx/imx8m/soc.c there's an implementation of board_fix_fdt() introduced by commit 35bb60787b88. Remove the redundant one to avoid failed to build from source when enabling CONFIG_OF_BOARD_FIXUP. Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: uboot-imx <uboot-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-21arm: set cntfrq_el0 if CONFIG_COUNTER_FREQUENCY is validWIP/2022-04-21-further-cleanupsPeng Fan1-3/+3
Since COUNTER_FREQUENCY is obselete, so set cntfrq_el0 if CONFIG_COUNTER_FREQUENCY is valid Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
2022-04-21xilinx: versal: board: use CONFIG_COUNTER_FREQUENCYPeng Fan1-1/+1
Since versal has CONFIG_COUNTER_FREQUENCY, so use it. And COUNTER_FREQUENCY will be dropped. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2022-04-21Merge https://source.denx.de/u-boot/custodians/u-boot-marvellWIP/21Apr2022Tom Rini8-269/+153
- mrvl_uart.sh: Remove script (Pali) - Fix Espressobin build for configs where ENV is not in SPI (Rogier) - mvebu: a37xx: Add support for reading OTP (Pali) - mvebu: uDPU: Ethernet fixes and misc DT and defconfig changes (Robert) - mvebu: Add support for reading LD0 and LD1 eFuse (Pali) - kwboot: Replace fstat()+st_size by lseek()+SEEK_END (Pali) - mvebu: turris_omnia: Enable CONFIG_CMD_FUSE (Pali) - arm: Add CONFIG_SPL_SYS_NO_VECTOR_TABLE used on 32bit MVEBU (Pali) - mvebu: a37xx: Add support for writing Security OTP values (Pali) - mvebu: turris: Misc enhancements and cleanups / fixes (Pali) - Sheevaplug : Use Marvell uclass mvgbe and PHY driver for Ethernet (Tony)
2022-04-21board: bsh: imx8mn_bsh_smm_s2/s2pro: enable DM_SERIALMichael Trimarchi1-9/+2
Enable DM_SERIAL for both U_Boot and the SPL. The uart4 and its pinmux are already marked with u-boot,dm-spl but we need to move the call to preloader_console_init() after spl_init() to avoid a board hang as dm can't be used until after spl_init(). Remove the manual config of the UART pinmux now that it is no longer needed. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Cc: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Tested-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
2022-04-21imx: imx8mn_evk: enable CONFIG_DM_SERIALPeng Fan1-10/+2
Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already marked with u-boot,dm-spl. move the preloader_console_init() call after spl_init() to avoid board hang Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21imx: imx8mm_evk: enable CONFIG_DM_SERIALPeng Fan1-10/+2
Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already marked with u-boot,dm-spl. move the preloader_console_init() call after spl_early_init() to avoid board hang Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21imx: imx8mp_evk: enable CONFIG_DM_SERIALPeng Fan1-8/+0
Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already marked with u-boot,dm-spl. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21board: ti: am335x: Add support for BBE Extended WiFiPaul Barker1-2/+8
The Sancloud BeagleBone Enhanced Extended WiFi (BBE Extended WiFi) has its own devicetree file and the board can be identified by the 2nd letter of the config string within the common EEPROM. Signed-off-by: Paul Barker <paul.barker@sancloud.com>
2022-04-21board: ti: am335x: Add BBE Lite supportPaul Barker1-2/+8
The Sancloud BeagleBone Enhanced Lite (BBE Lite) has its own devicetree file and the board can be identified by the 2nd letter of the config string within the common EEPROM. Signed-off-by: Paul Barker <paul.barker@sancloud.com>
2022-04-21arm: kirkwood: Sheevaplug : Use Marvell uclass mvgbe and PHY driver for EthernetTony Dinh2-93/+14
The Globalscale Technologies Sheevaplug board has the network chip Marvell 88E1116R. Use uclass mvgbe and the compatible driver M88E1310 driver to bring up Ethernet. - Remove CONFIG_RESET_PHY_R symbol from all board files - Use uclass mvgbe to bring up the network. And remove ad-hoc code. - Enable CONFIG_PHY_MARVELL to properly configure the network. - Miscellaneous changes: Move constants to .c file and remove header file board/Marvell/sheevaplug/sheevaplug.h, use BIT macro, and add/cleanup comments. Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2022-04-21board: toradex: drop colibri pxa270 supportMarcel Ziswiler5-207/+1
The Colibri PXA270 has been end-of-life since quite a while and would require more and more maintenance (e.g. DM conversions). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21board: gateworks: venice: add imx8mp-venice-gw740x supportTim Harvey8-10/+1968
The GW74xx is based on the i.MX 8M Plus SoC featuring: - LPDDR4 DRAM - eMMC FLASH - Gateworks System Controller - PCIe Gen 3.0 switch (build option) - USB 3.0 HUB - USB Type-C front panel connector - GPS - 3-axis accelerometer - CAN bus - 6x GbE RJ45 front-panel jacks - 1x IMX8M FEC RGMII GbE (with Passive PoE) - 5x IMX8M EQOS RGMII 6 port GbE Switch (1x with 802.3af class 5 Active PoE) - RS232/RS485/RS422 serial transceiver - MIPI header (DSI/CSI/GPIO/PWM/I2S) - DigI/O header (UART/GPIO/I2C/ADC) - 802.11ac WiFi - Bluetooth BLE - 3x MiniPCIe sockets with PCI/USB - 1x M.2 Socket with USB2.0, PCIe, and dual-SIM - PMIC - Wide range DC input supply (8V to 60V DC) Do the following to add support for this and future imx8mp-venice boards: - add dts - add DRAM config - add PMIC config - add IMX8MP support in spl.c and venice.c Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21board: gateworks: venice: add additional levels for dtb name matchTim Harvey1-0/+8
Gateworks produces many products from a single PCB with subloaded components. Add an additional two levels of dtb name matching so that for example a GW7400-A matches the dtb name of gw74xx.dtb Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21board: gateworks: gw_ventana: use comomn GSC driverTim Harvey9-177/+261
Use the common GSC driver. This allows us to do some additional cleanup: - use the GSC driver functions - move waiting for the EEPROM to the SPL int (it will always be ready after this) - move eeprom functions into eeprom file and elimate GSC_I2C_BUS - eliminate some redundant EEPROM reads (the EEPROM must be read in SPL before relocation, in SPL after relocation, and in U-Boot init. All subsequent uses can use the global structure) - remove unnecessary header files and alphabatize includes Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21board: gateworks: venice: use common GSC driverTim Harvey6-763/+398
Use the common GSC driver. This allows us to do some additional cleanup: - rename gsc{.c,.h} to eeprom{.c.h} for clarity - collapse eeprom_get_dev - remove unnecessary header files and alphabatize includes Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21configs: tdx: apalis_imx6: drop hw v1.0 supportMarcel Ziswiler1-36/+2
Drop optional support for the ancient Apalis iMX6 V1.0 hardware which had the UART wired as DCE rather than DTE. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21board: colibri_imx7: fix usb start on soloMarcel Ziswiler1-32/+8
This fixes the following crash when run on a Colibri iMX7S aka solo: Colibri iMX7 # usb start starting USB... Bus usb@30b10000: USB EHCI 1.00 Bus usb@30b20000: The i.MX 7Solo has only one single USB OTG1 but no USB host port. Trying to initialize the nonexisting port just crashes. While at it also drop board_usb_phy_mode() which is also no longer used in the driver model age. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21toradex: apalis-imx8x: drop support for apalis imx8xDenys Drozdov6-239/+1
Drop Apalis iMX8X platform as it never left sample state and is no longer supported. Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21board: turris: Rename atsha204a@64 DT node to crypto@64Pali Rohár1-1/+1
DT node name should be generic, therefore rename atsha204a@64 to crypto@64. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz>
2022-04-21board: turris: Allow to specify first eth idx of first MAC addressPali Rohár3-6/+6
Turris Omnia uses first MAC address from OTP for second ethernet interface. Second MAC address for third interface and third MAC address for first interface. Other Turris routers do not have this rotate by one mapping. So add function parameter for specifying id of the first ethernet interface. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz>
2022-04-21board: turris: Do not cache Atsha device in BSSPali Rohár1-4/+2
Atsha device is used prior relocation and at this early stage BSS does not have to be ready yet. So do not cache Atsha device in BSS. Fixes support for other Turris routers. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz>
2022-04-21board: turris: Move Turris Atsha OTP code to separate filePali Rohár4-105/+135
OTP code is not Atsha generic but also it is not Omnia specific. It is common for all Turris routers which use Atsha cryptochip for storing OTP. So move this common Turris specific Atsha OTP code from Turris Omnia into separate file. It will be used also by other Turris routers. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz>
2022-04-21arm: mvebu: a37xx: Extend mbox_do_cmd() codePali Rohár1-2/+2
Allow to specify input parameters, define all available mbox commands supported by CZ.NIC's secure firmware and also Marvell's fuse.bin firmware and fix parsing response from Marvell OTP commands. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-21arm: mvebu: a37xx: Move generic mbox code to arch/arm/mach-mvebuPali Rohár1-68/+1
Generic A3720 mbox code is currently in Turris Mox specific board file board/CZ.NIC/turris_mox/mox_sp.c. Move it to board independent arch file arch/arm/mach-mvebu/armada3700/mbox.c. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-21arm: mvebu: Fix Espressobin build for configs where ENV is not in SPIRogier Stam1-1/+3
When storing the UBoot Environment in for example EXT4, the U-Boot build is broken for several reasons: 1. armada-385-turris-omnia-u-boot.dtsi will not allow CONFIG_ENV_OFFSET and CONFIG_ENV_SIZE to be undefined 2. armada-37xx/board.c ft_board_setup function does not exist if CONFIG_ENV_IS_IN_SPI_FLASH is not defined This commit changes these files so that selecting a different location for the environment is possible. Signed-off-by: Rogier Stam <rogier@unrailed.org> Reviewed-by: Pali Rohár <pali@kernel.org>
2022-04-19Convert CONFIG_SYS_MEM_TOP_HIDE to KconfigTom Rini1-2/+2
This converts the following to Kconfig: CONFIG_SYS_MEM_TOP_HIDE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-19.mailmap: Start to use new amd.com email addressMichal Simek3-3/+3
Xilinx has been acquired by AMD that's why emails should be also updated. The patch is updating .mailmap file and also MAINTAINERS files as was done by commit 5cd1ecb99490 ("ppc: qemu: Update MAINTAINERS for correct email address"). The rest of my emails are not going to change. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-04-18board: rk3288: add more DT files to MAINTAINERSJohan Jonker7-0/+20
A number of rk3229/rk3288 DT files are synced from Linux. Add a maintainer to look after them and to help with review and testing. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-18board: google: veyron: add more DT files to MAINTAINERSJohan Jonker1-0/+17
The Google Veyron rk3288 DT files are synced from Linux. Add a maintainer to look after them and to help with review and testing. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-18rockchip: rk3066: add Rikomagic MK808 boardJohan Jonker4-0/+27
MK808 is a RK3066-based board with 1 USB host and 1 USB OTG port, HDMI and a micro-SD card slot. It also includes on-board NAND and 1GB of SDRAM. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-15Merge tag 'efi-2022-07-rc1-2' of ↵WIP/15Apr2022Tom Rini12-4/+247
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-07-rc1-2 Documentation: * Describe env command UEFI * simplify Unicode string functions * clean up the usage of GUIDs for capsule updates
2022-04-15Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-netTom Rini8-21/+19
- DM9000 DM support - tftp server bug fix - mdio ofnode support functions - Various phy fixes and improvements. [trini: Fixup merge conflicts in drivers/net/phy/ethernet_id.c drivers/net/phy/phy.c include/phy.h]
2022-04-15capsule: board: Add information needed for capsule updatesSughosh Ganu12-4/+247
Add a structure which defines the information that is needed for executing capsule updates on a platform. Some information in the structure like the dfu string is used for making the update process more robust while some information like the per platform image GUIDs is used for fixing issues. Initialise this structure in the board file, and use the information for the capsule updates. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2022-04-13board: gateworks: venice: add imx8mm-gw7903 supportTim Harvey5-624/+2997
The GW7903 is based on the i.MX 8M Mini SoC featuring: - LPDDR4 DRAM - eMMC FLASH - microSD socket with voltage select support - Gateworks System Controller - M.2 A-E Socket with USB2.0 and PCIe - MiniPCIe Socket with PCIe, USB2.0, and SIM - IMX8M FEC - RS232/RS485/RS422 serial transceiver - LIS2DE12 3-axis accelerometer - front panel LED's - off-board isolated digital I/O - Wide range DC power input - 802.3at PoE - PMIC Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-12ARM: dts: imx8mm: Add i.MX8M Mini Toradex Verdin based Menlo boardMarek Vasut4-0/+127
Add new board based on the Toradex Verdin iMX8M Mini SoM, the MX8Menlo. The board is a compatible replacement for i.MX53 M53Menlo and features USB, multiple UARTs, ethernet, LEDs, SD and eMMC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Max Krummenacher <max.krummenacher@toradex.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-04-12board: freescale: imxrt10..-evk: Fix missing include of serial.hJesse Taube2-0/+2
If FALCON mode is enabled we have a missing include in spl_start_uboot. Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
2022-04-12board: gateworks venice: add support for GPY111 phyTim Harvey1-0/+16
The TI DP83867 phy has been replaced with the MaxLinear GPY111 phy due to part availability. Add support for it by adding LED config and dt-prop based internal delay config tx-delay/rx-delay per PHY ID. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2022-04-12board: venice: add spl_board_loader_nameTim Harvey1-0/+14
Implement spl_board_loader_name to provide more meaningful device names vs MMC1 and MMC2. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-12ARM: dts: imx: Add support for Data Modul i.MX8M Mini eDM SBCMarek Vasut10-0/+4068
Add support for Data Modul i.MX8M Mini eDM SBC board. This is an evaluation board for various custom display units. Currently supported are serial console, ethernet, eMMC, SD, SPI NOR, USB host and USB OTG. Reviewed-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-04-12imx8mm-cl-iot-gate: Retrieve the serial number from EEPROMFabio Estevam1-0/+50
The serial number is located at offset 0x14 of the EEPROM under i2c0 bus at address 0x54. To print the serial number in Linux: SERNUM=$(cat /proc/device-tree/serial-number) echo $SERNUM Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-04-12imx8mm-cl-iot-gate: Retrieve the MAC address from EEPROMFabio Estevam1-0/+51
Currently the eth0 MAC address is randomly assigned. Retrieve the MAC address from EEPROM. Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-04-12imx8mm-cl-iot-gate: Retrieve the DDR type from EEPROMFabio Estevam2-3/+26
Currently, the DDR type is retrieved by iteracting inside an array of possible DDR types. This may take saveral attempts, which slows the overall U-Boot process and does not provide a good user experience: U-Boot SPL 2021.07 (Feb 28 2022 - 06:39:32 +0000) DDRINFO: Cfg attempt: [ 1/6 ] DDRINFO(M): mr5-8 [ 0xff000010 ] DDRINFO(T): mr5-8 [ 0x5000010 ] resetting ... U-Boot SPL 2021.07 (Feb 28 2022 - 06:39:32 +0000) DDRINFO: Cfg attempt: [ 2/6 ] DDRINFO(M): mr5-8 [ 0xff000010 ] DDRINFO(T): mr5-8 [ 0x1061010 ] resetting ... U-Boot SPL 2021.07 (Feb 28 2022 - 06:39:32 +0000) DDRINFO: Cfg attempt: [ 3/6 ] DDRINFO(M): mr5-8 [ 0xff000010 ] DDRINFO(T): mr5-8 [ 0xff000010 ] Normal Boot WDT: Not starting Trying to boot from MMC2 NOTICE: BL31: v2.5(release):v2.5 NOTICE: BL31: Built : 07:12:44, Jan 24 2022 Improve the boot time by retrieving the correct DDR information from the EEPROM: U-Boot SPL 2022.04-rc4-00045-g6d02bc40d58c (Mar 19 2022 - 08:22:29 -0300) DDRINFO(D): Kingston 4096G DDRINFO(M): mr5-8 [ 0xff000010 ] DDRINFO(E): mr5-8 [ 0xff000010 ] Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from MMC2 NOTICE: BL31: v2.5(release):v2.5 NOTICE: BL31: Built : 22:28:11, Mar 15 2022 Based on the original code from Compulab's U-Boot. Tested on a imx8mm-cl-iot-gate board populated with 4GB of RAM. Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-04-12imx8mm-cl-iot-gate: Add SPL EEPROM supportFabio Estevam2-1/+131
imx8mm-cl-iot-gate supports multiple DDR sizes and models. The DDR type can be retrieved from the EEPROM, so add SPL code that can be used to get the DDR information. Based on the original code from Compulab's U-Boot. Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-04-12bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boardsAriel D'Alessandro8-0/+2080
Introduce BSH SystemMaster (SMM) S2 board family, which consists of: iMX8MN SMM S2 and iMX8MN SMM S2 PRO boards. Add support for iMX8MN BSH SMM S2 board: - 256 MiB DDR3 RAM - 512MiB Nand - USBOTG1 peripheral - fastboot. - 100Mbit Ethernet Add support for iMX8MN BSH SMM S2 PRO board: - 512 MiB DDR3 RAM - 8 GiB eMMC - USBOTG1 peripheral - fastboot. - 100Mbit Ethernet Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
2022-04-12ARM: imx8mm: verdin-imx8mm: Drop superfluous headerMarek Vasut1-1/+0
The power/bd71837.h should no longer be included, since V1.1 SoM uses only the PCA9450 PMIC and the BD71837 support was removed. Drop the header too. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Max Krummenacher <max.krummenacher@toradex.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-12board: colibri-imx6ull: fix detecting ethernet phyPhilippe Schenker1-15/+8
Now that it is possible to use regulator-fixed-clock make use of it. This makes U-Boot detect the PHY on first cold-boot. This commit also adjusts the code in setup_fec and follows how it is done in mx6ullevk.c This commit also slows down the boot-process by about 150ms as it now waits for the regulator-fixed-clock voltage that drives the PHY to go up. If you rely on very fast boot-speeds and don't need ethernet for your boot-process you can safely revert the changes on imx6ull-colibri.dtsi Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-12board: colibri-imx6ull: Do not leave variant variable unsetPhilippe Schenker1-0/+4
Toradex uses the variable variant to distinguish between modules with eMMC, NAND with wifi and NAND without wifi. This variable is set on every boot. Set this variable also if we have a NAND module without wifi to prevent issues. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
generated by cgit v1.1 at 2024-07-31 11:39:01 +0000