aboutsummaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)AuthorFilesLines
2005-07-28* Patch by Eran LibertyEran Liberty4-0/+469
Add support for the Freescale MPC8349ADS board.
2005-07-25* Patch by Jon Loeliger, 2005-07-25Jon Loeliger9-9/+0
Move the TSEC driver out of cpu/mpc85xx as it will be shared by the upcoming mpc83xx family as well.
2005-07-25* Patch by Jon Loeliger, 2005-05-05Jon Loeliger9-8/+820
Implemented support for MPC8548CDS board. Added DDR II support based on SPD values for MPC85xx boards. This roll-up patch also includes bugfies for the previously published patches: DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
2005-07-23* Patch by Jon Loeliger, Kumar Gala 2005-02-08Jon Loeliger3-3/+0
- Convert the CPM2 based functionality to use new CONFIG_CPM2 option rather than a myriad of CONFIG_MPC8560-like variants. Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560. Eliminates the CONFIG_MPC8560 option entirely. Distributes the new CONFIG_CPM2 option to each 8260 board.
2005-07-21Patch by Jon Loeliger, 20 Jul 2005:Wolfgang Denk2-0/+310
Add missing PCI IO port definitions. author Kumar Gala <kumar.gala@freescale.com> Wed, 20 Jul 2005 15:39:52 -0500 committer Jon Loeliger <jdl@freescale.com> Wed, 20 Jul 2005 15:39:52 -0500
2005-07-21Adjust printed board ID for LWMON board.Wolfgang Denk1-1/+1
2005-07-21Fix file permissionsWolfgang Denk131-0/+0
2005-07-05* Patch by Stefan Roese, 5 Jul 2005:originstroese1-0/+9
Update uc100 board PHY setup
2005-06-27* Fix baudrate calculation problem on MPC5200 systemswdenk1-2/+5
* Add MPC8220 boards to MAKEALL script * Add EEPROM and RTC support for HMI1001 board * Patch by Detlev Zundel, 20 Jun 2005: Fix initialization of low active GPIO pins on inka4x0 board
2005-06-10* Add support for HMI1001 boardwdenk6-9/+395
* Disable "date" and "sntp" commands on TQM866M which has no RTC
2005-05-30Patch by Juergen Selent, 17 May 2005:wdenk7-0/+1426
Add support for Funkwerk VoVPN gateway module.
2005-05-19Patch by Greg Ungerer, 19 May 2005:wdenk10-1/+1124
add support for the OpenGear CM4008 board
2005-05-19Patch by Greg Ungerer, 19 May 2005:wdenk1-0/+101
add support for the OpenGear CM4008 board
2005-05-16Add PCI support for Sorcery board.wdenk3-111/+18
Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
2005-05-12* Fix debug code in omap5912osk flash driverLABEL_2005_05_13_0050wdenk6-2/+1001
* Add support for MPC8247 based "IDS8247" board.
2005-05-05Major upate of JFFS2 code; now in sync with snapshot of MTD CVS ofwdenk3-3/+3
March 13, 2005); new configuration options CONFIG_JFFS2_LZO and CONFIG_JFFS2_LZARI are added. Both are undefined by default.
2005-05-04Use linker ASSERT statement to prevent undetected overlapping ofwdenk1-0/+1
sections on PPChameleon board; other boards might use this, too.
2005-05-03* Patch by Stefan Roese, 03 May 2005:stroese1-0/+10
Update for P3G4 Fix problems in cmd_universe.c
2005-04-21Fix bug in the SDRAM initialization code for canmb, IceCube andwdenk3-12/+21
PM520 boards. Fix PHY address for canmb board.
2005-04-20Cleanup serial console baudrate calculation on AT91RM9200wdenk1-0/+43
2005-04-20Auto-size RAM on canmb board.wdenk1-43/+188
Cleanup.
2005-04-20* Patch by Matthias Fuchs, 18 Apr 2005:stroese1-316/+316
Make PCI target address spaces on PMC405 and CPCI405 boards configurable via environment variables
2005-04-13Add support for canmb boardLABEL_2005_04_14_0115wdenk4-0/+311
2005-04-13Update for esd apc405stroese2-2298/+2344
2005-04-07Cleanupwdenk1-1/+0
2005-04-07* Patch by Stefan Roese, 06 Apr 2005:stroese3-14/+79
Updates for OCOTEA board: - Changed U-Boot size from 512kByte to 256kByte - Fixed flash driver to support boot from soldered user flash - Added README for switch from PIBS firmware to U-Boot
2005-04-06Patch by Steven Scholz, 06 Apr 2005:wdenk5-11/+8
- creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200 - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
2005-04-06* Patches by Robert Whaley, 29 Nov 2004:wdenk7-0/+947
- update the pxa-regs.h file for PXA27x chips - add PXA27x based ADSVIX board - add support for MMC on PXA27x processors * Patch by Andrew E. Mileski, 28 Nov 2004: Fix PPC4xx SPD SDRAM detection bug * Patch by Hiroshi Ito, 26 Nov 2004: Fix logic of "test -z" and "test -n" commands
2005-04-05* Patch by Ladislav Michl, 05 Apr 2005:wdenk7-1/+708
Add support for VoiceBlue board. * Patch by Ladislav Michl, 05 Apr 2005: Fix netboot_common() prototypes. * Cleanup.
2005-04-05Add support for MPC8220 based "sorcery" board.LABEL_2005_04_05_2345wdenk6-133/+241
2005-04-05Add support for TQM8560 boardLABEL_2005_04_05_1830wdenk5-0/+894
2005-04-04Patch by Steven Scholz, 4 Apr 2005:wdenk1-3/+3
- remove all references to CONFIG_INIT_CRITICAL for ARM based boards - introduce two new configuration options instead: CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
2005-04-03* Patch by Mathias Küster, 23 Nov 2004:wdenk1-1/+1
add udelay support for the mcf5282 cpu * Patch by Tolunay Orkun, 16 November 2004: fix incorrect onboard Xilinx CPLD base address
2005-04-03Patch by Jerry Van Baren, 08 Nov 2004:wdenk1-1/+6
- Add low-boot option for MPC8260ADS board (if lowboot is selected, the jumper for the HRCW source should select flash. If lowboot is not selected, the jumper for the HRCW source should select the BCSR. - change default load base address to 0x00400000
2005-04-03* Patch by Yuli Barcohen, 08 Nov 2004:wdenk6-8/+437
Add support for Analogue & Micro Rattler boards. Tested on Rattler8248. * Patch by Andre Renaud, 08 Nov 2004: Fix watchdog support in common/lcd.c * Patch by Marc Leeman, 05 Nov 2003: Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU bug only affects the XPC8245 processors
2005-04-03Patches by Josef Wagner, 29 Oct 2004:wdenk12-0/+2516
- Add support for MicroSys CPU87 board - Add support for MicroSys PM854 board
2005-04-03* Patch by Yusdi Santoso, 22 Oct 2004:wdenk8-0/+1136
- Add support for HIDDEN_DRAGON board - fix endianess problem in driver/rtl1839.c * Patch by Allen Curtis, 21 Oct 2004: support multiple serial ports
2005-04-03Patch by Steven Scholz, 03 Apr 2005:wdenk1-1/+1
- create SoC specific directories include/asm-arm/arch-imx and include/asm-arm/arch-s3c24x0
2005-04-02Prepare for SoC rework of ARM code:wdenk66-126/+126
- rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL - rename memsetup into lowlevel_init (function name and source files)
2005-04-02Fix problems with SNTP support;wdenk1-2/+0
enable SNTP support in some boards.
2005-04-01Patch by Martin Krause, 01 Apr 2005:wdenk1-2/+76
Add automatic HW detection for CMC_PU2 and CMC_BASIC
2005-03-31Patch by Steven Scholz, 13 Dec 2004:wdenk4-407/+0
Remove duplicated code by merging memsetup.S files for at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
2005-03-27Patches by Martin Krause, 22 Mar 2005:wdenk1-5/+139
- use TQM5200_auto as MAKEALL target for TQM5200 systems - add support for SM501 graphics controller - add support for graphic console on TQM5200 - add support for TQM5200 Rev 200 - cleanup, fix typo in include/configs/TQM5200.h
2005-03-17Update for esd auto_update and hh405 boardstroese1-2511/+2488
2005-03-16Update for esd auto_update and hh405 boardstroese6-6571/+10032
2005-03-15Update code for TQM8540 board (and 85xx in general):wdenk1-5/+2
- Change the name of the Ethernet driver: MOTO ENET -> ENET - Reformat boot messages - Enable redundant environment - Replace the -O2 optimization flag with -mno-string
2005-03-14* Patch by David Brownell, 10 Mar 2005:wdenk5-0/+742
Restore copyright statements in OHCI drivers. * Add support for TQM8540 board
2005-03-14Patch by Detlev Zundel, 14 Mar 2005:wdenk1-0/+36
NC650: changed NAND flash addressing to using UPMB
2005-03-14INKA4x0: Allow initialization of LCD backlight dimming fromwdenk1-0/+15
"brightness" environment variable.
2005-03-14Update for esd voh405 fpga imagestroese1-1974/+2011
generated by cgit v1.1 at 2024-07-31 05:34:13 +0000