aboutsummaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)AuthorFilesLines
2020-07-07board: dh_stm32mp1: update the gpio hog supportPatrick Delaunay1-8/+2
This patch update the current gpio hog implementation with the new API gpio_hog_probe_all() activated with CONFIG_GPIO_HOG. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07board: st: move type-c stusb1600 controller code in a driverPatrick Delaunay5-52/+71
Migrate the ST Microelectronics STUSB160X Type-C controller code in a generic I2C driver in st/common, based on Linux one in : drivers/usb/typec/stusb160x.c This patch simplifies the stm32mp1 board code and allows to reuse this STUSB160X driver in other boards. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07board: st: stm32mp1: increase teed partitionPatrick Delaunay1-1/+1
With TEE 3.7.0, the partition teed (OP-TEE pageable code and data) need to increase up to 512KB in NOR device. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07board: stm32mp1: update the gpio hog supportPatrick Delaunay1-8/+2
This patch updates the current gpio hog implementation and uses the new API gpio_hog_probe_all(), activated with CONFIG_GPIO_HOG. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07board: stm32mp1: move the function board_debug_uart_init in spl.cPatrick Delaunay2-2/+28
Move the debug function board_debug_uart_init in spl.c as the debug_uart_init() function is called in arch_cpu_init() only for SPL and remove the board.c file. For TFABOOT, the UART TX pin configuration is done in TF-A. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07board: stm32mp1: update vddcore in SPLPatrick Delaunay4-4/+41
For board using STPMIC1, the vddcore is provided by BUCK1 of STPMIC1 and need to be updated for 800MHz support and only after the clock tree initialization. The VDDCORE voltage value is provided by clock driver, saved in global variable opp_voltage_mv and udpated in SPL board_early_init_f(), just after clock tree initialization. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07board: st: stpmic1: add function stpmic1_initPatrick Delaunay6-38/+53
Add a function stmpic_init to early initialize the PMIC STPMIC1 - keep vdd on during the reset cycle (to avoid issue when backup battery is absent) - Check if debug is enabled to program PMIC according to the bit This patch allows to remove the compilation of spl.c file from stm32mp1 board in dh_stm32mp1. CONFIG_SPL_BOARD_INIT is removed as the new function is called earlier in SPL, in the function board_early_init_f. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07board: st: create common file stpmic1.cPatrick Delaunay4-159/+166
Move function board_ddr_power_init() in a new file stpmic1 in board/st/common to avoid duplicated code in each board using stpmic1 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-06Revert "riscv: sifive: fu540: Add gpio-restart support"Tom Rini1-2/+0
As part of merging the next branch in to master, the sifive_fu540 will fail to link: riscv64-linux-ld.bfd: lib/built-in.o: in function `panic_finish': lib/panic.c:28: undefined reference to `do_reset' make[2]: *** [spl/u-boot-spl] Error 1 make[1]: *** [spl/u-boot-spl] Error 2 make: *** [sub-make] Error 2 And while the "fix the build" option of enabling CONFIG_SPL_SYSRESET may solve the issue, it is unclear that it is the correct path exactly. For the moment, I am reverting this commit and take a "revert the revert" and proper fix as soon as it's available. This reverts commit cdae446461191714d692190da1ad4344398adc57. Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Anup Patel <anup.patel@wdc.com> Cc: Atish Patra <atish.patra@wdc.com> Cc: Bin Meng <bin.meng@windriver.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-06Merge branch 'next'Tom Rini156-14331/+1301
Merge all outstanding changes from the current next branch in now that we have released.
2020-07-03riscv: sifive: fu540: enable all cache ways from U-Boot properPragnesh Patel1-1/+9
Add L2 cache node to enable all cache ways from U-Boot proper. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-03riscv: sifive: fu540: Add gpio-restart supportBin Meng1-0/+2
The HiFive Unleashed board wires GPIO pin#10 to the input of the system reset signal. This adds gpio reboot support. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Sagar Kadam <sagar.kadam@sifive.com> Tested-by: Sagar Kadam <sagar.kadam@sifive.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-07-01riscv: Add Sipeed Maix supportSean Anderson4-0/+104
The Sipeed Maix series is a collection of boards built around the RISC-V Kendryte K210 processor. This processor contains several peripherals to accelerate neural network processing and other "ai" tasks. This includes a "KPU" neural network processor, an audio processor supporting beamforming reception, and a digital video port supporting capture and output at VGA resolution. Other peripherals include 8M of sram (accessible with and without caching); remappable pins, including 40 GPIOs; AES, FFT, and SHA256 accelerators; a DMA controller; and I2C, I2S, and SPI controllers. Maix peripherals vary, but include spi flash; on-board usb-serial bridges; ports for cameras, displays, and sd cards; and ESP32 chips. Currently, only the Sipeed Maix Bit V2.0 (bitm) is supported, but the boards are fairly similar. Documentation for Maix boards is located at <http://dl.sipeed.com/MAIX/HDK/>. Documentation for the Kendryte K210 is located at <https://kendryte.com/downloads/>. However, hardware details are rather lacking, so most technical reference has been taken from the standalone sdk located at <https://github.com/kendryte/kendryte-standalone-sdk>. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-06-30ti814x: Remove platformTom Rini6-316/+0
The TI814x (DM814x) platform is rather old and in need of a lot of migration work. As much of that work is well past the deadline, remove this platform. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-30am335x: Update list of defconfigsTom Rini1-2/+0
Both the am335x_boneblack and am335x_evm_usbspl configs have been gone for a while, remove their entries from MAINTAINERS. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-30colibri_pxa270: add mmc platform dataMarcel Ziswiler1-5/+15
Add MMC platform data. While at it also fix trivial checkpatch.pl issues. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2020-06-29spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*Lukasz Majewski1-2/+2
This change allows more fine tuning of driver model based SPI support in SPL and TPL. It is now possible to explicitly enable/disable the DM_SPI support in SPL and TPL via Kconfig option. Before this change it was necessary to use: /* SPI Flash Configs */ #if defined(CONFIG_SPL_BUILD) #undef CONFIG_DM_SPI #undef CONFIG_DM_SPI_FLASH #undef CONFIG_SPI_FLASH_MTD #endif in the ./include/configs/<board>.h, which is error prone and shall be avoided when we strive to switch to Kconfig. The goal of this patch: Provide distinction for DM_SPI support in both U-Boot proper and SPL (TPL). Valid use case is when U-Boot proper wants to use DM_SPI, but SPL must still support non DM driver. Another use case is the conversion of non DM/DTS SPI driver to support DM/DTS. When such driver needs to work in both SPL and U-Boot proper, the distinction is needed in Kconfig (also if SPL version of the driver supports OF_PLATDATA). In the end of the day one would have to support following use cases (in single driver file - e.g. mxs_spi.c): - U-Boot proper driver supporting DT/DTS - U-Boot proper driver without DT/DTS support (deprecated) - SPL driver without DT/DTS support - SPL (and TPL) driver with DT/DTS (when the SoC has enough resources to run full blown DT/DTS) - SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have constrained environment with no fitImage and OF_LIBFDT support). Some boards do require SPI support (with DM) in SPL (TPL) and some only have DM_SPI{_FLASH} defined to allow compiling SPL. This patch converts #ifdef CONFIG_DM_SPI* to #if CONFIG_IS_ENABLED(DM_SPI) and provides corresponding defines in Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [trini: Fixup a few platforms] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HABTom Rini3-3/+3
There are a few remaining places where we say CONFIG_SECURE_BOOT rather than CONFIG_IMX HAB. Update these instances. Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com> Cc: Eddy Petrișor <eddy.petrisor@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Priyanka Jain <priyanka.jain@nxp.com> Fixes: d714a75fd4dc ("imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HAB") Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-06-25Merge tag 'xilinx-for-v2020.10' of ↵Tom Rini39-2279/+1213
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.10 Versal: - xspi bootmode fix - Removing one clock from clk driver - Align u-boot memory setting with OS by default - Map TCM and OCM by default ZynqMP: - Minor DT improvements - Reduce console buffer for mini configurations - Add fix for AMS - Add support for XDP platform Zynq: - Support for AES engine - Enable bigger memory test by default - Extend documentation for SD preparation - Use different freq for Topic miami board mmc: - minor GD pointer removal net: - Support fixed-link cases by zynq gem - Fix phy looking loop in axi enet driver spi: - Cleanup global macros for xilinx spi drivers firmware: - Add support for pmufw reloading fpga: - Improve error status reporting common: - Remove 4kB addition space for FDT allocation
2020-06-25xilinx: zynqmp: Enable pmufw config reloadingMichal Simek1-0/+20
PMU FW has functionality to accept and reload configuration object at run time. The patch is adding support for doing it via u-boot prompt. For example: tftpboot 100000 pmu_obj.bin zynqmp pmufw 100000 $filesize The most of pmufw configurations don't allow config reloading. Also official Xilinx PMUFW doens't support this feature properly but the patch should open a way to call PMUFW with this request. Here is example of PMUFW config fragment which enables config reloading. /* SET CONFIG SECTION */ PM_CONFIG_SET_CONFIG_SECTION_ID, /* Section ID */ PM_CONFIG_IPI_PSU_CORTEXA53_0_MASK | PM_CONFIG_IPI_PSU_CORTEXR5_0_MASK | PM_CONFIG_IPI_PSU_CORTEXR5_1_MASK, /* Permissions to set config */ Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-25arm64: zynqmp: Print multiboot reg in decimalMichal Simek1-1/+1
It is better to print multiboot value in decimal because boot images are also composed in decimal not in hex. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24topic: zynqmp: Add support for zynqmp-xilinx-xdp platformMike Looijmans1-0/+1038
XDP - Xilinx Drone Platform is a board for drones or other UAV. Pinmux the SD card by default, and if the SD card detect line is high (inactive) then pinmux the SD1 interface to EMIO instead. SD is placed on extension card and shares connection with on board wife. That means that when SD card is present in the board wifi can't be used. There seems to be an issue with DDR access from PL at 2400MT/s, after updating the PMU and ATF firmware this is causing extremely slow DDR access. Reducing the DDR speed from 2400 to 2133 appears to solve that issue, even though the hardware has proven to be 2400 capable. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24board: zynqmp: Fix for wrong AMS setting by ROMMike Looijmans1-0/+6
A bug in the ZynqMP bootrom sets the PS_SYSMON_ANALOG_BUS register at 0xFFA50914 to the wrong value 0x3201. This causes the AMS to exchange the PS supply voltages 0 and 1. On Xilinx boards this is not noticeable since these are tied together, it's only really noticeable if banks 500 and 501 have different supplies. Xilinx' tech support reported this undocumented register to be the cause, and this patch applies a fix for all boards by programming the correct value. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24board: topic-miami: Set FCLK1 to 150MHzMike Looijmans2-2/+2
In all reference designs the FCLK1 runs at 150MHz, but the bootloader doesn't set it up like that. Set the divider to 8 to generate the correct clock. Fixes (a.o.) the DMA speed being too slow. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24fpga: zynqpl: Add zynq aes load & loadp commandsT Karthik Reddy1-12/+35
Added support for zynq aes load & loadp commands. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24fpga: zynqpl: Correct PL bitstream loading sequence for zynqaesSiva Durga Prasad Paladugu1-2/+5
Correct the PL bitstream loading sequence for zynqaes command by clearing the loaded PL bitstream before loading the new encrypted bitstream using the zynq aes command. This was done by setting the PROG_B same as in case of fpgaload commands. This patch fixes the issue of loading the encrypted PL bitstream onto the PL in which a bitstream has already been loaded successfully. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-23mx6cuboxi: remove unused codeWalter Lozano1-65/+0
After enabling SPL_OF_CONTROL, SPL_DM and SPL_DM_MMC the MMC initialization code is not longer needed. This patch removes the unused code. Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
2020-06-23mx6cuboxi: customize board_boot_order to access eMMCWalter Lozano1-0/+48
In SPL legacy code only one MMC device is created, based on BOOT_CFG register, which can be either SD or eMMC. In this context board_boot_order return always MMC1 when configure to boot from SD/eMMC. After switching to DM both SD and eMMC devices are created based on the information available on DT, but as board_boot_order only returns MMC1 is not possible to boot from eMMC. This patch customizes board_boot_order taking into account BOOT_CFG register to point to correct MMC1 / MMC2 device. Additionally, handle IO mux for the desired boot device. Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
2020-06-22imx: imx8qm_rom7720_a1: update READMEOliver Graute1-0/+11
Update README to extract firmware from scripts Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2020-06-22ARM: imx6: Fetch MAC address in board_init_late() on DH iMX6 PDK2Marek Vasut1-2/+2
This is needed to obtain the MAC from EEPROM/OTP only after the final env is populated, otherwise the ethaddr might be overriden. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Claudius Heine <ch@denx.de> Cc: Harald Seiler <hws@denx.de> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de>
2020-06-22arm: wandboard: move CONFIG_MXC_UART to defconfigHeinrich Schuchardt1-0/+10
For using a debug UART on the Wandboard CONFIG_MXC_UART=y must be set in the .config file. To avoid duplicate definitions move the setting from include/configs/wandboard.h to configs/wandboard_defconfig. Document the debug UART settings in the README. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-06-22Fix MMC access on SabreliteMartyn Welch1-72/+0
It appears that MMC access on the Sabrelite has been broken since cdcaee9518: Loading Environment from MMC... Card did not respond to voltage select! *** Warning - No block device, using default environment Remove the board_mmc_init() and related entries now that we should be using DM_MMC, add PINCTRL so that things work as expected. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Tested-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Troy Kisky <troy.kisky@boundarydevices.com>
2020-06-22mx6cuboxi: Convert to DM_ETHFabio Estevam1-117/+17
Migration to DM_ETH is mandatory, so convert mx6cuboxi to Ethernet Driver Model. This also brings the benefit of restoring Ethernet functionality. Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Tom Rini <trini@konsulko.com>
2020-06-19Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spi into nextTom Rini134-14868/+1
- Convert fsl_espi to driver model (Chuanhua) - Enable am335x baltos to DM_SPI (Jagan) - Drop few powerpc board which doesn't have DM enabled (Jagan)
2020-06-19Merge https://gitlab.denx.de/u-boot/custodians/u-boot-tegraTom Rini1-1/+1
2020-06-18Merge tag 'video-next' of ↵Tom Rini2-1/+6
https://gitlab.denx.de/u-boot/custodians/u-boot-video into next - migrate remaining imx5/imx6qd boards to DM_VIDEO - use 'vidconsole' stdout in nitrogen6x upgrade script - add option for selection of the vidconsole commands lcdputs and setcurs - allow building ipuv3 driver with disabled CONFIG_PANEL - make backlight and panel drivers optional - remove useless code from ipuv3 driver - extend existing DM_VIDEO work-around for console name to support 'vga' - remove non-DM code in ipuv3
2020-06-18colibri_t20: change maintainerIgor Opaniuk1-1/+1
Take over maintainership for Colibri T20 module. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Lucas Stach <dev@lynxeye.de>
2020-06-18imx: convert cgtqmx6eval board to DM_VIDEOAnatolij Gustschin1-0/+5
Migration to DM_VIDEO driver is long overdue. Update defconfig to enable usage of converted ipuv3 driver DM configuration. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br>
2020-06-18nitrogen6x: update video console nameAnatolij Gustschin1-1/+1
After migration to DM 'vga' name is not longer supported, Update the upgrade script to use 'vidconsole' instead. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Troy Kisky <troy.kisky@boundarydevices.com>
2020-06-18powerpc: Remove TWR-P1025_defconfig boardJagan Teki7-478/+0
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Xiaobo Xie <xiaobo.xie@nxp.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-18powerpc: Remove T4160QDS_NAND_defconfig boardJagan Teki18-2775/+0
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-18powerpc: Remove T1040QDS_DDR4_defconfig boardJagan Teki16-1657/+0
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Poonam Aggrwal <poonam.aggrwal@nxp.com> Patch-cc: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-18powerpc: Remove T1024QDS_DDR4_SECURE_BOOT_defconfig boardJagan Teki17-1967/+0
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-18powerpc: Remove P1022DS_36BIT_NAND_defconfig boardJagan Teki11-1342/+0
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Timur Tabi <timur@tabi.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-18powerpc: Remove configs/MPC8536DS_36BIT_defconfig boardJagan Teki8-599/+0
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-18powerpc: Remove configs/C29XPCIE_NAND_defconfig boardJagan Teki12-831/+0
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Po Liu <po.liu@nxp.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-18powerpc: Remove configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig boardJagan Teki9-1069/+0
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Naveen Burmi <naveen.burmi@nxp.com> Patch-cc: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-18powerpc: Remove configs/BSC9131RDB_NAND_SYSCLK100_defconfig boardJagan Teki9-629/+0
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Poonam Aggrwal <poonam.aggrwal@nxp.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-18powerpc: Remove configs/B4420QDS_NAND_defconfig boardJagan Teki15-2517/+0
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Ashish Kumar <ashish.kumar@nxp.com> Patch-cc: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-18Merge tag 'ti-v2020.10-next' of ↵Tom Rini9-121/+63
https://gitlab.denx.de/u-boot/custodians/u-boot-ti into next - DM conversion for OMAP4, OMAP5 platforms. - Other minor fixes for Nokia RX51, am33, am57, am654.
generated by cgit v1.1 at 2024-07-09 07:24:49 +0000