aboutsummaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)AuthorFilesLines
2022-08-04Audit <flash.h> inclusionTom Rini8-9/+5
A large number of files include <flash.h> as it used to be how various SPI flash related functions were found, or for other reasons entirely. In order to migrate some further CONFIG symbols to Kconfig we need to not include flash.h in cases where we don't have a NOR flash of some sort enabled. Furthermore, in cases where we are in common code and it doesn't make sense to try and further refactor the code itself in to new files we need to guard this inclusion. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04Convert CONFIG_FLASH_CFI_LEGACY to KconfigTom Rini1-0/+4
This converts the following to Kconfig: CONFIG_FLASH_CFI_LEGACY Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04Convert CONFIG_SYS_FLASH_ERASE_TOUT et al to KconfigTom Rini2-8/+10
This converts the following to Kconfig: CONFIG_SYS_FLASH_ERASE_TOUT CONFIG_SYS_FLASH_LOCK_TOUT CONFIG_SYS_FLASH_UNLOCK_TOUT CONFIG_SYS_FLASH_WRITE_TOUT In practice, for two m68k platforms we move to hard-coding with a comment the timeout values, rather than try and make convoluted Kconfig logic. We add options for the write and erase options to the pic32 flash driver, as this driver does make use of them. Everywhere else these are unreferenced values. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04P1010RDB: Drop support for not-CONFIG_SYS_DDR_RAW_TIMINGTom Rini1-138/+0
All platforms today define CONFIG_SYS_DDR_RAW_TIMING, so drop the code for this option being unset. Cc: Qiang Zhao <qiang.zhao@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04malta: Switch to using CONFIG_SYS_SDRAM_SIZETom Rini2-3/+3
This is the only platform defining and using CONFIG_SYS_MEM_SIZE, switch to using CONFIG_SYS_SDRAM_SIZE for consistency. Cc: Paul Burton <paul.burton@mips.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZETom Rini4-8/+7
We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04imx: imx8mp_rsb3720a1: fix incorrect ifdef check on SPL_MMCQuentin Schulz1-2/+2
Since commit 103c5f180694 ("mmc: Rename MMC_SUPPORT to MMC"), SPL_MMC_SUPPORT is named SPL_MMC, so let's fix the ifdef. Fixes: fbc6b1414342 ("imx: imx8mp_rsb3720a1: convert to DM_SERIAL") Cc: Quentin Schulz <foss+uboot@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
2022-07-31Merge tag 'fsl-qoriq-2022-7-29' of ↵Tom Rini2-4/+6
https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq mpc85xx: support for generating QorIQ pre-PBL eSDHC boot sector p1_p2_rdb_pc: Remove I-flag from second L2 SRAM mapping p1_p2_rdb_pc: Fix parsing inverted bits from boot input data p1_p2_rdb_pc: Simplify SPL offset macros
2022-07-29board: freescale: p1_p2_rdb_pc: Fix parsing inverted bits from boot input dataPali Rohár1-2/+4
On some boards upper 4 bits of i2c boot input data (register 0) are inverted. Information which bits are inverted is stored in register 2. So invert read input data back according to register 2 prior processing them. This fixes printing "rom_loc: value" line during booting. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-29board: freescale: p1_p2_rdb_pc: Remove I-flag from second L2 SRAM mappingPali Rohár1-2/+2
U-Boot for initial L2 SRAM uses L2 memory-mapping mode and not L2 with locked lines. P2020 reference manual about L2 memory-mapping mode says: Accesses to memory-mapped SRAM are cacheable only in the corresponding e500 L1 caches. So there is no need to set Caching-Inhibit I-bit for second part of initial L2 SRAM mapping in TLB entry. Remove it. First part of initial L2 SRAM mapping already does not have I-bit set. For more details see also: https://lore.kernel.org/u-boot/20220508150844.qqxg452rs4wtf5bs@pali/ Signed-off-by: Pali Rohár <pali@kernel.org>
2022-07-29gpio: Add Turris Omnia MCU driverPali Rohár1-0/+1
This driver registers GPIO controller and allows U-Boot to control GPIO pins on MCU which is connected to Turris Omnia via i2c. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-27Merge tag 'dm-pull-26jul22' of ↵Tom Rini1-0/+9
https://gitlab.denx.de/u-boot/custodians/u-boot-dm.git minor dm- and fdt-related fixes start of test for fdt command
2022-07-26Merge tag 'u-boot-imx-20220726' of ↵Tom Rini28-307/+1912
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20220726 ------------------- i.MX for 2022.10 - Added i.MX93 architecture CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/12891
2022-07-26board: freescale: imx93_evk: support ethernetPeng Fan1-0/+32
Add ethernet support Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26imx: imx93_evk: Set ARM clock to 1.7GhzPeng Fan1-0/+3
Set ARM clock to OD frequency 1.7Ghz, since we have set PMIC VDD_SOC to Overdrive voltage 0.9V Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26imx: imx93_evk: Add basic board supportPeng Fan7-1/+1706
Add basic board codes and defconfig for i.MX93 11x11 EVK board. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26misc: imx: S400_API: Move S400 MU and API to a common placeYe Li1-1/+1
Since iMX9 uses S401 which shares the API with iMX8ULP. So move S400 MU driver and API to a common place and selected by CONFIG_IMX_SENTINEL Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26addrmap: Support on sandboxSimon Glass1-0/+9
Update this feature so that it works on sandbox, using a basic identity mapping. This allows us to run the 'ut addrmap' test. Also fix up the test to use the correct macros to access the linker list, so that the 'ut addrmap' command actually works. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-07-26fpga: xilinx: add bitstream flags to driver descOleksandr Suvorov2-2/+8
Store a set of supported bitstream types in xilinx_desc structure. It will be used to determine whether an FPGA image is able to be loaded with a given driver. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Tested-by: Ricardo Salveti <ricardo@foundries.io> Tested-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com> Link: https://lore.kernel.org/r/20220722141614.297383-4-oleksandr.suvorov@foundries.io Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-07-26xilinx: common: Use strlcpy instead of strncpyMichal Simek1-5/+5
It is recommendation done by checkpatch to all the time have \0 terminated strings. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/c7bfab50c40f6213f1b347b5e4674e382e83cb94.1658413156.git.michal.simek@amd.com
2022-07-26xilinx: Wire uuid reading from FRUMichal Simek1-0/+18
UUID is already recorded when FRU is parsed but it is not copied to local structures and exported to variable that's why simply add it. Data is saved in binary format but there must be conversion to string for exporting it to variable and string should be in uuid format too. One way how to use it directly is to setup pxeuuid based on it. For example via preboot with "setenv pxeuuid ${board_uuid}" Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/1dfa4b4220a508abc05351da2119880811b77612.1658413156.git.michal.simek@amd.com
2022-07-26zynqmp: Run board_get_usable_ram_top() only on main U-BootAshok Reddy Soma1-0/+3
With commit ce39ee28ec31 ("zynqmp: Do not place u-boot to reserved memory location"), the function board_get_usable_ram_top() is allocating MMU_SECTION_SIZE of about 2MB using lmb_alloc(). But we dont have this much memory in case of mini U-Boot. Keep these functions which use lmb under CONFIG_LMB so that they are compiled and used only when LMB is enabled. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/75e52def75f573e554a6b177a78504c128cb0c4a.1657183534.git.michal.simek@amd.com
2022-07-25arm: mach-k3: Rename SOC_K3_AM6 to SOC_K3_AM654Andrew Davis2-3/+3
The first AM6x device was the AM654x, but being the first we named it just AM6, since more devices have come out with this same prefix we should switch it to the normal convention of using the full name of the first compatibility device the series. This makes what device we are talking about more clear and matches all the K3 devices added since. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-07-25board: ti: am65x: Do not disable SA2UL in DTAndrew Davis1-10/+0
This is no longer needed as the SA2UL can now be shared with Linux. Leave the SA2UL DT node enabled. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-07-25board: qualcomm: Add support for QCS404 EVBSumit Garg5-0/+124
Add support for Qualcomm QCS404 SoC based evaluation board. Features: - Qualcomm Snapdragon QCS404 SoC - 1GiB RAM - 8GiB eMMC, uSD slot U-boot is chain loaded by ABL in 64-bit mode as part of boot.img. For detailed build and boot instructions, refer to doc/board/qualcomm/qcs404.rst. Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-07-25board: qualcomm: Add support for dragonboard845cSumit Garg5-0/+99
Add support for 96Boards Dragonboard 845C aka Robotics RB3 development platform. This board complies with 96Boards Open Platform Specifications. Features: - Qualcomm Snapdragon SDA845 SoC - 4GiB RAM - 64GiB UFS drive U-boot is chain loaded by ABL in 64-bit mode as part of boot.img. For detailed build and boot instructions, refer to doc/board/qualcomm/sdm845.rst, board: dragonboard845c. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-07-25board: ti: am335x: Use correct dtbs for SanCloud boardsPaul Barker1-4/+14
We have different dtbs for the Lite and Extended WiFi variants of the SanCloud BBE. Signed-off-by: Paul Barker <paul.barker@sancloud.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-07-25board: ti: am335x: Enable spi0 bus on SanCloud BBE LitePaul Barker1-0/+5
The SanCloud BBE Lite has a Micron Authenta flash device connected to the spi0 bus. Signed-off-by: Paul Barker <paul.barker@sancloud.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-07-25board: toradex: apalis-imx8: fix file names in maintainersMarcel Ziswiler1-2/+2
Fix device tree file names in MAINTAINERS file. Fixes: 3d6036650059 ("board: toradex: add apalis imx8qm 4gb wb it v1.0b module support") Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25verdin-imx8mp: synchronise device tree with linuxMarcel Ziswiler1-2/+6
Synchronise device tree with linux v5.19-rc5. Please note that this also means that instead of the previous "generic" U-Boot specific carrier board agnostic device tree we are now using the regular one for the Verdin Development (carrier) board (e.g. imx8mp-verdin-wifi-dev.dtb rather than the previous imx8mp-verdin.dtb). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25imx8mn: synchronise device tree with linuxMarcel Ziswiler1-1/+1
Synchronise device tree with linux v5.19-rc5. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25imx8mm-mx8menlo/verdin-imx8mm: synchronise device tree with linuxMarcel Ziswiler2-3/+7
Synchronise device tree with linux v5.19-rc5. Please note that this also means that instead of the previous "generic" U-Boot specific carrier board agnostic device tree we are now using the regular one for the Verdin Development (carrier) board (e.g. imx8mm-verdin-wifi-dev.dtb rather than the previous imx8mm-verdin.dtb). Please further note that the PMIC node name got changed from a pmic label to pmic@25 which required adjustment in resp. board SPL file board/toradex/verdin-imx8mm/spl.c. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25colibri_vf: synchronise device tree with linuxMarcel Ziswiler1-5/+5
Synchronise device tree with linux v5.19-rc5. Please note that this also means that instead of the previous "generic" U-Boot specific carrier board agnostic device tree we are now using the regular one for the Colibri Evaluation (carrier) board V3 (e.g. vf610-colibri-eval-v3.dtb rather than the previous vf610-colibri.dtb). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25colibri-imx7d/-emmc: synchronise device tree with linuxMarcel Ziswiler2-8/+10
Synchronise device tree with linux-next next-20220708. Please note that this also means that instead of the previous "generic" U-Boot specific carrier board agnostic device trees we are now using the regular ones for the Colibri Evaluation (carrier) board V3 (e.g. imx7d-colibri-eval-v3.dtb rather than the previous imx7-colibri-rawnand.dtb and imx7d-colibri-emmc-eval-v3.dtb rather than the previous imx7-colibri-emmc.dtb). Please further note that the PMIC node name got changed from rn5t567@33 to pmic@33 which required adjustment in resp. board file board/toradex/colibri_imx7/colibri_imx7.c. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25colibri-imx6ull/-emmc: synchronise device tree with linuxMarcel Ziswiler1-2/+5
Synchronise device tree with linux v5.19-rc5. Please note that this also means that instead of the previous "generic" U-Boot specific carrier board agnostic device trees we are now using the regular ones for the Colibri Evaluation (carrier) board V3 (e.g. imx6ull-colibri-eval-v3.dtb rather than the previous imx6ull-colibri.dtb and imx6ull-colibri-emmc-eval-v3.dtb rather than the previous imx6ull-colibri-emmc.dtb). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25colibri_imx6: synchronise device tree with linuxMarcel Ziswiler1-1/+3
Synchronise device tree with linux-next next-20220708. Please note that this also means that instead of the previous "generic" U-Boot specific carrier board agnostic device tree we are now using the regular one for the Colibri Evaluation (carrier) board V3 (e.g. imx6dl-colibri-eval-v3.dtb rather than the previous imx6-colibri.dtb). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25apalis_imx6: synchronise device tree with linuxMarcel Ziswiler1-2/+4
Synchronise device tree with linux-next 20220706. Please note that this also means that instead of the previous "generic" U-Boot specific carrier board agnostic device tree we are now using the regular one for the Apalis Evaluation (carrier) board (e.g. imx6q-apalis-eval.dtb rather than the previous imx6-apalis.dtb). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25toradex: common: Improve product/serial print during bootFrancesco Dolcini1-3/+4
Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2022-07-25toradex: tdx-cfg-block: Use official SKU namesFrancesco Dolcini1-69/+69
Up to now in the code we named Toradex SKUs in a slightly different way compared to the official product name, start using the official names from now on to avoid misunderstanding. This has also the nice benefit of the string being shorter, allowing to fit nicely in 80 columns even adding the product ID when printing the hardware information. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2022-07-25toradex: common: Remove #ifdef usage for 2nd ethaddrFrancesco Dolcini1-3/+2
Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2022-07-25toradex: common: Remove stale function declarationFrancesco Dolcini1-4/+0
Remove stale show_boot_logo() declaration, not used anywhere. Fixes: e6fd30dd9eef ("toradex: drop legacy show_boot_logo function and use splashscreen") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2022-07-25toradex: tdx-cfg-block: Cleanup interactive cfg block creationFrancesco Dolcini3-272/+92
Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2022-07-25toradex: common: Use ARRAY_SIZE macroFrancesco Dolcini1-4/+2
Use generally available ARRAY_SIZE macro, instead of hand-coding it every time is needed. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2022-07-25toradex: common: Remove stale comments about modules availabilityFrancesco Dolcini2-4/+4
Remove comment "not currently on sale" on specific SKUs, this information does not belong to the code and will never be accurate. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2022-07-25toradex: tdx-cfg-block: add 0068 i.mx 8m mini skuPhilippe Schenker3-2/+15
Add new i.MX 8M Mini SKU to ConfigBlock handling. 0068: Verdin iMX8M Mini Quad 2GB WB IT No CAN This SKU is identical to 0055 but without CAN. Mention this in the name so those modules can be distinguished. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2022-07-25board: freescale: Add entry for imx8mm_evk_fspi_defconfigMamta Shukla1-0/+1
Add entry for imx8mm_evk_fspi_defconfig in board/freescale/imx8mm_evk/MAINTAINERS Signed-off-by: Mamta Shukla <mamta.shukla@leica-geosystems.com> Signed-off-by: Thomas Haemmerle <thomas.haemmerle@leica-geosystems.com> Tested-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-07-25board: freescale: Add QSPI Boot support in spl for i.MX8mMamta Shukla1-0/+2
Add QSPI Boot option in u-boot-spl for i.MX8m EVK. Signed-off-by: Mamta Shukla <mamta.shukla@leica-geosystems.com> Signed-off-by: Thomas Haemmerle <thomas.haemmerle@leica-geosystems.com> Tested-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-07-25configs: Add config for enabling FSPI boot option for i.MX8mMamta Shukla1-0/+7
Add imx8mm_evk_fspi_defconfig to build QSPI boot image. This config is based on imx8mm_evk_defconfig with addtional config options to define FSPI Header parameters required to generate QSPI Header. Update SPL offset to include header size and overwrite IMX_CONFIG to use lpddr.cfg for FSPI. Signed-off-by: Mamta Shukla <mamta.shukla@leica-geosystems.com> Signed-off-by: Thomas Haemmerle <thomas.haemmerle@leica-geosystems.com> Tested-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2022-07-25mx6cuboxi: fix board detection while patching device-tree phy nodesJosua Mayer1-1/+12
ft_board_setup relies on the board_type() function to optimize which phy nodes need to be enabled for Linux. Add calls to setup and release the board-detect GPIOs. Also fix the switch-case statement to only enable phy address 4 for Cubox and unknown devices. Fixes: 741ce308 ("mx6cuboxi: fixup dtb ethernet phy nodes before booting an OS") Signed-off-by: Josua Mayer <josua@solid-run.com>
2022-07-21treewide: Fix Marek's name and change my e-mail addressMarek Behún9-9/+9
Fix diacritics in some instances of my name and change my e-mail address to kabel@kernel.org. Add corresponding .mailmap entries. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
generated by cgit v1.1 at 2024-07-14 03:11:58 +0000