aboutsummaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)AuthorFilesLines
2022-03-16Merge tag 'xilinx-for-v2022.07-rc1' of ↵WIP/16Mar2022-nextTom Rini6-8/+942
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2022.07-rc1 microblaze: - Add support for reserved memory xilinx: - Update FRU code with MAC reading zynqmp: - Remove double AMS setting - DT updates (mostly for SOMs) - Add support for zcu106 rev 1.0 zynq: - Update nand binding nand: - Aligned zynq_nand to upstream DT binding net: - Add support for ethernet-phy-id mmc: - Workaround CD in zynq_sdhci driver also for ZynqMP - Add support for dynamic/run-time SD config for SOMs gpio: - Add driver for slg7xl45106 firmware: - Add support for dynamic SD config power-domain: - Update zynqmp driver with the latest firmware video: - Add skeleton driver for DP and DPDMA i2c: - Fix i2c to work with QEMU pinctrl: - Add driver for zynqmp pinctrl driver
2022-03-14Merge tag 'v2022.04-rc4' into nextTom Rini13-56/+150
Prepare v2022.04-rc4
2022-03-14board: ti: j721e: evm.c: Fix the probing of in Sierra SerDes0Aswath Govindraju1-15/+13
Initialization and power on operations of links have been moved under the link device in the Sierra SerDes driver. Also, the UCLASS of sierra_phy_provider has been changed to UCLASS_MISC. Therefore, fix the probing of SerDes0 instance accordingly. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Reviewed-by: Georgi Vlaev <g-vlaev@ti.com>
2022-03-14x86: Correct the coreboot header file in MAINTAINERSSimon Glass1-2/+2
This board has its own config header file. Correct it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-03-12Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-spiWIP/12Mar2022Tom Rini1-8/+43
- sunXi SPI fixups (Andre) - bcm iproc qspi (Rayagonda)
2022-03-10arm: add initial support for the Phytium Pomelo BoardWIP/2022-03-10-platform-updatesweichangzheng9-0/+556
This adds platform code and the device tree for the Phytium Pomelo Board. The initial support comprises the UART and the PCIE. Signed-off-by: weichangzheng <nicholas_zheng@outlook.com>
2022-03-10ARM: am3517_evm: Remove hard-coded pin muxingAdam Ford1-198/+0
With updated device trees now supporting pinmuxing for USB, ethernet, MMC, and other peripherals necessary to start MLO and U-Boot, the hard-coded pinmux options can be removed since they are now handed by DM and only muxed when the respective peripheral needs it. Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
2022-03-10ARM: omap3_logic: Remove hard-coded USB muxingAdam Ford1-17/+0
With recent fixes to USB pinmuxing in the device trees, there is no need to hard-code the pinmuxing in this table. It is all handled in DM now. Signed-off-by: Adam Ford <aford173@gmail.com>
2022-03-10ARM: am3517-evm: Remove more non-DM legacy ethernet reset codeAdam Ford1-8/+0
The ethernet controller is DM compliant, and the device tree defines it. There is no need to manually handle pulling the ethernet out of reset. Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
2022-03-10ARM: omap3_beagle: Power on MMC when setting up PMICRomain Naour1-7/+2
The PMIC enables power to the MMC card by default, but depending on the state it was left when restarted, it's possible the MMC may be powered down. This patch patch explicitly tells the twl4030 to power the MMC. Based on commits [1][2]. [1] 64fd2d26140aa72b43428d079974f7c0e7f88353 [2] 27b653449178e80b333e7bc5a81eed3bd1bd6861 Signed-off-by: Romain Naour <romain.naour@gmail.com>
2022-03-10ARM: omap3_beagle: Remove non-DM initializationRomain Naour1-7/+0
With DM_MMC working for both SPL and U-Boot, this patch removes the legacy style of initializing the MMC driver. Based on omap3_logic: 42140dd0962bc134c0aad27524d0f4cc3955f255. Signed-off-by: Romain Naour <romain.naour@gmail.com>
2022-03-10event: Convert misc_init_f() to use eventsSimon Glass3-4/+12
This hook can be implmented using events, for the three boards that actually use it. Add the event type and event handlers. Drop CONFIG_MISC_INIT_F since we can just use CONFIG_EVENT to control this. Since sandbox always enables CONFIG_EVENT, we can drop the defconfig lines there too. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-10sunxi: use boot source for determining environment locationAndre Przywara1-8/+43
Currently we only support to load the environment from raw MMC or FAT locations on Allwinner boards. With the advent of SPI flash we probably also want to support using the environment there, so we need to become a bit more flexible. Change the environment priority function to take the boot source into account. When booted from eMMC or SD card, we use FAT or MMC, if configured, as before. If we are booted from SPI flash, we try to use the environment from there, if possible. The same is true for NAND flash booting, although this is somewhat theoretical right now (as untested). This way we can use the same image for SD and SPI flash booting, which allows us to simply copy a booted image from SD card to the SPI flash, for instance. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2022-03-09arm64: zynqmp: add support for zcu106 rev1.0Neal Frager1-0/+842
This patch adds psu_init for Xilinx ZCU106 rev1.0. Xilinx ZCU106 rev1.0 has newer x16 DDR4 memories and it is SW compatible with revA. Signed-off-by: Neal Frager <neal.frager@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/997b3e23457e4d24ce0e197d742382aaec36c2b2.1646230318.git.michal.simek@xilinx.com
2022-03-08board: .gitignore: replace dsdt.c by dsdt_generated.cPhilippe Reynes6-18/+18
Since commit 5d94cbd1dca7 ("scripts: Makefile.lib: generate dsdt_generated.c instead of dsdt.c"), the file generated is named dsdt_generated.c instead of dsdt.c. So all files .gitignore referencing dsdt.c should be upated with dsdt_generated.c. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2022-03-07bcm96753ref: add initial supportPhilippe Reynes4-0/+65
This add the initial support of the broadcom reference board bcm96753ref with a bcm6753 SoC. This board has 1 GB of RAM, 256 MB of flash (nand), 2 USB port, 1 UART, and 4 ethernet ports. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-07microblaze: Do not place u-boot to reserved memory locationMichal Simek1-0/+21
Microblaze can also have reserved space in DT which u-boot has to avoid to placing self to that location. The same change was done in Zynqmp by commit ce39ee28ec31 ("zynqmp: Do not place u-boot to reserved memory location"). This feature was tested with this memory description on kc705: memory { device_type = "memory"; reg = <0x80000000 0x40000000>; }; reserved-memory { #address-cells = <1>; #size-cells = <1>; ranges; alloc@b00000000 { reg = <0xb0000000 0x10000000>; no-map; }; alloc@a8000000 { reg = <0xa8000000 0x00010000>; no-map; }; }; And in U-Boot log you can check u-boot relocation address and reserved locations. U-Boot 2022.01-03974-gb1b4c2dea9b9 (Feb 25 2022 - 11:59:48 +0100) Model: Xilinx MicroBlaze DRAM: 1 GiB Flash: 128 MiB Loading Environment from nowhere... OK In: serial Out: serial Err: serial Model: Xilinx MicroBlaze Net: AXI EMAC: 40c00000, phyaddr 7, interface gmii eth0: ethernet@40c00000 U-BOOT for microblaze-generic U-Boot-mONStR> bdi ... DRAM bank = 0x00000000 -> start = 0x80000000 -> size = 0x40000000 ... relocaddr = 0xaff69000 ... lmb_dump_all: memory.cnt = 0x1 memory[0] [0x80000000-0xbfffffff], 0x40000000 bytes flags: 0 reserved.cnt = 0x3 reserved[0] [0xa8000000-0xa800ffff], 0x00010000 bytes flags: 4 reserved[1] [0xafe87bb0-0xafffffff], 0x00178450 bytes flags: 0 reserved[2] [0xb0000000-0xbfffffff], 0x10000000 bytes flags: 4 Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/ea0a8ccce723478eb518f6fdceb91d4f129efb68.1646122398.git.michal.simek@xilinx.com
2022-03-07Revert "board: zynqmp: Fix for wrong AMS setting by ROM"T Karthik Reddy1-6/+0
This reverts commit dfbe492edef421de09617dc26805fc428440924e. Analog bus control register should be programmed in SPL only. This commit 3414712ba8a ("arm64: zynqmp: Writing correct value to ANALOG_BUS") is programming the same. So revert this commit. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/215bc936e36f88d2e7c4422ec68cad6d40cb8f68.1645624892.git.michal.simek@xilinx.com
2022-03-07fru: ops: Add support to read mac addresses from multirecordAshok Reddy Soma3-0/+69
Add support to read MAC addresses from mac address multirecord. Check if multi record is found, then jump to mac address multirecord by comparing the record type field. If it matches mac address multirecord(0xD2), then copy mac addresses. Copy these read MAC address in xilinx_read_eeprom_fru so that they are updated to eth*addr in board_late_init_xilinx(). Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/18f31bc528820934854ea5fd9dc581778fc1e40c.1645624855.git.michal.simek@xilinx.com
2022-03-07xilinx: common: Optimise updating ethaddr from eepromAshok Reddy Soma1-1/+1
In board_late_init_xilinx() eth*addr are updated from the values read from eeprom. Ideally the MAC addresses are updated sequencially. So if any MAC address is invalid, it means there are no further valid values. So optimise this logic by replacing continue with break. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/efef0d07add5d5777396ea111ad75411dc402db3.1645624855.git.michal.simek@xilinx.com
2022-03-07fru: ops: Return error from checksum if data is all zero'sAshok Reddy Soma1-0/+8
fru_checksum function is simply adding all the bytes and returning the sum. If the data passed to this function is all zero's then it will return 0, and the functions calling this api will assume that checksum is correct. Ideally this is not good. Fix this by returning error if all the data is 0's. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/ac0366fe55c60a818a3f9ed33d96826c817d5520.1645624855.git.michal.simek@xilinx.com
2022-03-07fru: ops: Clear fru table before storing dataAshok Reddy Soma1-1/+1
Fill fru table with 0's before using it, to avoid junk data. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/e5f15caf9c2102316e39f300d7c9c1ecb6be8439.1645624855.git.michal.simek@xilinx.com
2022-03-04arm: mach-k3: am6_init: Use CONFIG_TI_I2C_BOARD_DETECTChristian Gmeiner1-11/+15
We only want to call do_board_detect() if CONFIG_TI_I2C_BOARD_DETECT is set. Same as done for am64. This makes it possible to add a custom am65 based board design to U-Boot that does not use this board detection mechanism. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2022-03-04ARM: mvebu: x530: clearfog: Add ODT configurationChris Packham2-0/+2
Commit 369e532691e0 ("ddr: marvell: a38x: allow board specific ODT configuration") added the odt_config member to struct mv_ddr_topology_map ahead of the clk_enable and ck_delay members. This means that any boards that configured either of clk_enable or ck_delay needed to have their board topology updated. This affects the x530 and clearfog boards. Other A38x boards don't touch any of the trailing members of mv_ddr_topology_map so don't need updating. Fixes: 369e532691e0 ("ddr: marvell: a38x: allow board specific ODT configuration") Signed-off-by: Chris Packham <judge.packham@gmail.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de>
2022-03-03Convert CONFIG_BIOSEMU to KconfigTom Rini1-0/+7
This converts the following to Kconfig: CONFIG_BIOSEMU Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini1-2/+57
Update and fixes for sl28, lx2, pblimage generation for some powerpc products
2022-03-02armv8: Fix and simplify branch_if_master/branch_if_slaveAndre Przywara1-1/+1
The branch_if_master macro jumps to a label if the CPU is the "master" core, which we define as having all affinity levels set to 0. To check for this condition, we need to mask off some bits from the MPIDR register, then compare the remaining register value against zero. The implementation of this was slighly broken (it preserved the upper RES0 bits), overly complicated and hard to understand, especially since it lacked comments. The same was true for the very similar branch_if_slave macro. Use a much shorter assembly sequence for those checks, use the same masking for both macros (just negate the final branch), and put some comments on them, to make it clear what the code does. This allows to drop the second temporary register for branch_if_master, so we adjust all call sites as well. Also use the opportunity to remove a misleading comment: the macro works fine on SoCs with multiple clusters. Judging by the commit message, the original problem with the Juno SoC stems from the fact that the master CPU *can* be configured to be from cluster 1, so the assumption that the master CPU has all affinity values set to 0 does not hold there. But this is already mentioned above in a comment, so remove the extra comment. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-28board: stemmy: Detect board variants and patch DTBWIP/2022-02-28-bugfixesLinus Walleij1-0/+315
This patch scans the cmdline from the Samsung SBL (second stage bootloader) and stores the parameters board_id=N and lcdtype=N in order to augment the DTB for different board and LCD types. We then add a custom ft_board_setup() callback that will inspect the DTB and patch it using the stored LCD type. At this point we know which product we are dealing with, so using the passed board_id we can also print the board variant for diagnostics. We patch the Codina, Skomer and Kyle DTBs to use the right LCD type as passed in lcdtype from the SBL. This also creates an infrastructure for handling any other Samsung U8500 board variants that may need a slightly augmented DTB. Cc: Markuss Broks <markuss.broks@gmail.com> Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-02-28arm: pdu001: Setup pinmux for console UART as early as possibleFelix Brack1-0/+30
To make sure we get a working console as soon as possible in the SPL the UART pins require to be configured earlier. This is especially true for the pins of UART3, since the PDU001 board uses this UART for the console by default. Signed-off-by: Felix Brack <fb@ltec.ch>
2022-02-28arm: pdu001: Fix early debugging UARTFelix Brack2-5/+3
The changes from commit 0dba45864b2a ("arm: Init the debug UART") prevent the early debug UART from being initialized correctly. To fix this we not just configure the pin multiplexer but add setting up early clocks. Signed-off-by: Felix Brack <fb@ltec.ch> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-02-28board: sl28: disable recovery watchdogMichael Walle1-0/+29
This board has an internal watchdog which supervises the board startup. Although, the initial state of the watchdog is configurable, it is enabled by default. In board_late_init(), which means almost everything worked as expected, disable the watchdog. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-28board: sl28: print CPLD version on bootupMichael Walle1-0/+28
Most of the time it is very useful to have the version of the board management controller. Now that we have a driver, print it during startup. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-28board: sl28: fix DRAM pretty printMichael Walle1-2/+0
The current console output is: DRAM: 4 GiB DDR 4 GiB (DDR3, 32-bit, CL=11, ECC on) The size is printed twice and we can save one line of console output if we join both lines. The new output is as follows: DRAM: 4 GiB (DDR3, 32-bit, CL=11, ECC on) Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-25scripts: Makefile.lib: generate dsdt_generated.c instead of dsdt.cPhilippe Reynes8-8/+8
There is a conflict between the static file lib/acpi/dsdt.c and the file dsdt.c generated dynamicaly by scripts/Makefile.lib. When a mrproper is done, the static file dsdt.c is removed. If a build with acpi enabled is launched after, the following error is raised: CC lib/acpi/acpi_table.o make[2]: *** No rule to make target 'lib/acpi/dsdt.asl', needed by 'lib/acpi/dsdt.c'. Stop. scripts/Makefile.build:394: recipe for target 'lib/acpi' failed To avoid such error, the generated file is named dsdt_generated.c instead of dstdt.c. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-02-21Merge tag 'xilinx-for-v2022.04-rc3' of ↵Tom Rini5-11/+72
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2022.04-rc3 microblaze: - Fix exception handler zynqmp: - Show information about secure images - DT changes (som u-boot file removal) - Fix zynqmp_pm_cfg_obj_convert.py - Fix platform boot xilinx: - Fix bootm_size calculation - Remove GPIO_EXTRA_HEADER selection power: - Add zynqmp power management driver scsi: - Add phy support to ceva driver zynq qspi: - Fix unaligned accesses and check baudrate setup - Add support for spi memory operations net: - Fix 64bit calculation in axi_emac video: - Add missing gpio dependency for seps driver
2022-02-21arm64: zynqmp: Fix debug uart initializationMichal Simek1-10/+22
The commit 0dba45864b2a ("arm: Init the debug UART") calls debug_uart_init() from crt0.S but it won't work because SOC is not configured yet. That's why create board_debug_uart_init() which calls psu_init() via new psu_uboot_init() earlier before the first access to UART in SPL. In full U-Boot call psu_uboot_init() only when CONFIG_ZYNQMP_PSU_INIT_ENABLED is enabled. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/878dc2daaa8685346f889989fbfb98b2e44da7fb.1645104518.git.michal.simek@xilinx.com
2022-02-21ARM: zynq: Fix debug uart initializationMichal Simek1-0/+7
The commit 0dba45864b2a ("arm: Init the debug UART") calls debug_uart_init() from crt0.S but it won't work because SOC is not configured yet. That's why create board_debug_uart_init() which calls ps7_init() earlier before the first access to UART. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/18e67e02a0c7190839a1ef3a11f3fd6babcf34cc.1645104518.git.michal.simek@xilinx.com
2022-02-21arm64: zynqmp: Fix dependencies around ZYNQMP_PSU_INIT_ENABLEDMichal Simek1-0/+2
ZYNQMP_PSU_INIT_ENABLED is called only when BOARD_EARLY_INIT_F is defined that's why cover this dependency in Kconfig. board_early_init_f() is only part related to CONFIG_ZYNQMP_PSU_INIT_ENABLED which is disabled now that's why disable BOARD_EARLY_INIT_F and also build board_early_init_f() only when CONFIG_BOARD_EARLY_INIT_F is enabled. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/d89253ec1590cd513dcd4bfbedebae618bd6d605.1645104518.git.michal.simek@xilinx.com
2022-02-21xilinx: Enable OF_BOARD for zynq and zynqmp boardsMichal Simek1-1/+2
The commit 985503439762 ("fdt: Don't call board_fdt_blob_setup() without OF_BOARD") forced to enable OF_BOARD for platforms which provide DT externally. Zynq/ZynqMP boards are using this feature for a long time that's why there is a need to enable it by default. Also code expects to return error in case of error that's why also fill it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/9f11bbffe2849f4da7d72712082d579262fe8fd8.1645104518.git.michal.simek@xilinx.com
2022-02-20Merge tag 'u-boot-imx-20220220' of ↵Tom Rini24-27/+6755
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20220220 ------------------- CI : https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/11037 - ESDHC fixes - imx8mq : MNT Reform 2 board - imx8m: add support for Advantech RSB-3720 - fixes for imx8mn-ddr4-evk - fixes gateworks boards - doc : fix build for imx8mn_beacon - fuses: compare and read functions - imx8mn-ddr4-evk: boot from SD and Ethernet support
2022-02-19ARM: imx: imx8mn-ddr4-evk: Add ethernet supportMarek Vasut1-3/+33
Add support for ethernet on the imx8mn-ddr4-evk. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-02-19kontron-pitx-imx8m: fix board_mmc_getcd()Heiko Thiery1-4/+3
The function wrongly will return the card detection status of the SD card (USDHC2) for the eMMC (USDHC1). Thus booting from eMMC without an inserted SD card will fail. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-02-19board: gateworks: venice: add imx8mn-gw7902 supportTim Harvey11-7/+2456
The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring: - LPDDR4 DRAM - eMMC FLASH - Gateworks System Controller - LTE CAT M1 modem - USB 2.0 HUB - M.2 Socket with USB2.0, PCIe, and dual-SIM - IMX8M FEC - PCIe based GbE - RS232/RS485/RS422 serial transceiver - GPS - CAN bus - WiFi / Bluetooth - MIPI header (DSI/CSI/GPIO/PWM/I2S) - PMIC To add support for the i.MX8M Nano GW7902: - Add imx8mn-venice dts/defconfig/include - Add imx8mn-gw7902 dts - Add imx8mn-2gb lpddr4 dram configs - Add misc support for IMX8M Nano SoC - rename imx8mm-venice.c to venice.c as it is no longer imx8mm specific - update README with differences for IMX8MN vs IMX8MM Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-19arm: imx8m: add support for Advantech RSB-3720Ying-Chun Liu (PaulLiu)8-0/+4251
Add initial support for Advantech RSB-3720 board. The initial support includes: - MMC - eMMC - I2C - FEC - Serial console Signed-off-by: Darren Huang <darren.huang@advantech.com.tw> Signed-off-by: Kevin12.Chen <Kevin12.Chen@advantech.com.tw> Signed-off-by: Phill.Liu <Phill.Liu@advantech.com.tw> Signed-off-by: Tim Liang <tim.liang@advantech.com.tw> Signed-off-by: wei.zeng <wei.zeng@advantech.com.cn> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: uboot-imx <uboot-imx@nxp.com> Cc: Peng Fan (OSS) <peng.fan@oss.nxp.com>
2022-02-19imx8mm_beacon/imx8mn_beacon: Update build instructionsAdam Ford2-9/+9
With binman generating flash.bin, it's not longer necessary to specify either the location of ATF nor is it necessary to specify building flash.bin, so let's update the build instructions to remove those. While in here, update the revision of ATF and DDR firmware so both Mini and Nano reference the same revision. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-18freescale: imx8mm_evk: Use IS_ENABLED instead of #ifdefTommaso Merciai1-4/+5
Use IS_ENABLED(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG) to make the code more readable and fix checkpatch.pl warning Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
2022-02-17Merge https://source.denx.de/u-boot/custodians/u-boot-marvellWIP/17Feb2022Tom Rini1-2/+20
- a37xx: pci: Cleanup and minor fix for root port check (Pali) - pci: mvebu: Ensure that root port is always on root zero bus (Pali) - kwbimage: Fix dumping DATA registers for v0 images (Pali) - kwbimage: Support for parsing extended v0 format (Pali) - a37xx: Fix code and update DTS files to upstream version (Pali) - a37xx: Fix and extend building memory map (Pali) - ddr: marvell: a38x: fix BYTE_HOMOGENEOUS_SPLIT_OUT decision (Marek) - mvebu: Optionally reset board on DDR training failure (Marek)
2022-02-17arm: mvebu: turris_mox: Remove hardcoded ethernet node namesPali Rohár1-2/+20
Armada 3720 DTS files in upstream kernel use ethernet nodes named 'ethernet@30000' and 'ethernet@40000'. U-Boot have them named 'neta@30000' and 'neta@40000'. To have Turris Mox U-Boot board code independent of ethernet node names, find ethernet node via alias. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-16board: ti: j721e: Add support for detecting multiple device treesSinthu Raja1-2/+14
Update the board_fit_config_name_match() to choose the right dtb based on the board name read from EEPROM. Also restrict multpile EEPROM reads by verifying if EEPROM is already read. Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-16board: ti: j721e: Disable probing of daughtercardsSinthu Raja1-3/+6
j721e-sk doesn't have any daughter cards, so disable daughter card probing inside board_late_init() and spl_board_init() for j721e-sk. Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
generated by cgit v1.1 at 2024-08-13 05:26:17 +0000