aboutsummaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)AuthorFilesLines
2021-08-19Merge https://source.denx.de/u-boot/custodians/u-boot-riscvWIP/19Aug2021Tom Rini4-3/+26
2021-08-17board: sifive: overwrite board_fdt_blob_setup in u-boot properZong Li2-0/+22
Add board_fdt_blob_setup to return the device tree location which is passed by prior stage in u-boot proper. The generic board_fdt_blob_setup always returns _end, it mignt be ok because u-boot SPL would currently put the dtb there, but it would be broken if we put the dtb to another place and assigned the location into a1 register for u-boot proper. Use the location passed by prior stage would make more sence, because we actually pass the location to u-boot proper and want to use that one, rather than the dtb which in _end. We can't use CONFIG_OF_PRIOR_STAGE because it doens't distinguish the implementation of u-boot SPL and u-boot proper, so u-boot SPL need to reply on the prior stage to pass device tree location as well, but we don't pass the DT from boot rom now. In addition, when CONFIG_OF_PRIOR_STAGE is enabled, the u-boot-spl.bin and u-boot.itb won't include the device tree. Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-08-17board: sifive: compile stuff only related to SPL in SPL buildZong Li2-3/+4
As (3581811dc26f "riscv: sifive/fu540: Move SPL related functions to spl.c"), we put the SPL stuff in spl.c, we don't need to compile unleashed.c and unmatched.c in SPL build. Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-08-16board: apalis-tk1: launch toradex easy installer in usb recoveryMarcel Ziswiler1-2/+18
The USB recovery mode is used by Toradex to load the Toradex Easy Installer image which supports further system images installation. Prepare for loading and launching the Toradex Easy Installer if the USB Recovery mode is activated. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-08-16arm: stm32mp: add defconfig for trusted boot with FIPPatrick Delaunay3-14/+39
Add TF-A FIP support for trusted boot on STM32MP15x, when STM32MP15x_STM32IMAGE is not activated. With FIP support the SSBL partition is named "fip" and its size is 4MB, so the ENV partition name in device tree (for SD card or eMMC) or offset in defconfig (CONFIG_ENV_OFFSET / CONFIG_ENV_OFFSET_REDUND) need to be modified. With FIP the TEE MTD partitions are removed because the OP-TEE binray are included in the FIP containers. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16arm: stm32mp: add config for STM32IMAGE supportPatrick Delaunay1-3/+7
By default for trusted boot with TF-A, U-Boot (u-boot-nodtb) is located in FIP container with its device tree and with the secure monitor (provided by TF-A or OP-TEE). The FIP file is loaded by TF-A BL2 and each components is extracted at the final location. This patch add CONFIG_STM32MP15x_STM32IMAGE to request the STM32 image generation for SOC STM32MP15x when FIP container is not used (u-boot.stm32 is loaded by TF-A as done previously to keep the backward compatibility). Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-11Merge https://source.denx.de/u-boot/custodians/u-boot-cfi-flashWIP/11Aug2021Tom Rini1-0/+2
- Some CFI flash related fixups (Kconfig & header) (Bin) - Enable CFI flash support on the QEMU RISC-V virt machine. (Bin)
2021-08-11Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini3-14/+47
- Convert GoFlex Home Ethernet and SATA to Driver Model (Tony) - mvebu: Automatically detect CONFIG_SYS_TCLK (Pavel) - mvebu: sata_mv: Fix HDD identication during cold start (Tony) - a37xx: pci: Fix handling PIO config error responses (Pavel) - Other minor misc changes and board maintainer updates
2021-08-11Merge tag 'u-boot-amlogic-20210810' of ↵Tom Rini1-1/+1
https://source.denx.de/u-boot/custodians/u-boot-amlogic - odroid-n2: fix fdtfile suffix for n2-plus - sei610 & meson64_android cleanups to prepare android 11 boot support - use Android BCB mechanism for reboot reason instead of HW reboot flag - Switch meson64_android boot flow to use abootimg for A/B, AVB and DTBO support
2021-08-11riscv: qemu: Enable MTD NOR flash supportBin Meng1-0/+2
Enable support to the 2 NOR flashes on the QEMU RISC-V virt machine. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11arm: kirkwood: Goflex Home: Update board maintainerTony Dinh1-1/+1
Change maintainer to me. Suriyan no longer has this board and wishes to see someone maintaining it actively. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11arm: kirkwood: Dockstar: Update board maintainerTony Dinh1-1/+1
Change maintainer to me. Eric no longer has this board and wishes to see someone maintaining it actively. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11arm: kirkwood: GoFlex Home: Use Ethernet PHY name and address from device treeTony Dinh1-12/+45
In DM Ethernet, the old "egiga0" name is no longer valid, so replace these with Ethernet PHY names from device tree. Also, read Ethernet PHY address from device tree. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-10board: amlogic: odroid-n2: fix fdtfile suffix for n2-plusChristian Hewitt1-1/+1
The N2+ dtb is meson-g12b-odroid-n2-plus.dtb, not n2_plus, so correct the suffix provided in the board file. Also align the board ident string shown during boot to match. Fixes: 8bc780106c13 ("board: amlogic: odroid: add runtime detection of the N2/N2+/C4/HC4 variants") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-08-09Merge tag 'u-boot-imx-20210809' of ↵WIP/09Aug2021Tom Rini28-646/+2636
https://source.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20210809 - new SOC: add support for imx8ulp - Toradex fixes for colibri (vf / imx6 / imx7 / imx8x) - convert to DM for mx28evk - Fixes for Gateworks ventana boards CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/8639
2021-08-09arm: imx: add i.MX8ULP EVK supportPeng Fan7-0/+1564
Add i.MX8ULP EVK basic support, support SD/I2C/ENET/LPUART Log as below: I would keep some debug info for now, and after we move to be stable and production launch, we could drop that. U-Boot SPL 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) Normal Boot upower_init: soc_id=48 upower_init: version:11.11.6 upower_init: start uPower RAM service user_upwr_rdy_callb: soc=b user_upwr_rdy_callb: RAM version:12.6 Turn on switches ok Turn on memories ok Clear DDR retention ok Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F0 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. complete De-Skew PLL is locked and ready WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 Load image from 0x3a800 by ROM_API NOTICE: BL31: v2.4(release):imx_5.10.35_2.0.0_imx8ulp_er-10-gf37e59b94 NOTICE: BL31: Built : 01:56:58, Jun 29 2021 NOTICE: upower_init: start uPower RAM service NOTICE: user_upwr_rdy_callb: soc=b NOTICE: user_upwr_rdy_callb: RAM version:12.6 U-Boot 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) CPU: Freescale i.MX8ULP rev1.0 at 744 MHz Reset cause: POR Boot mode: Single boot Model: FSL i.MX8ULP EVK DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@293a0000 Out: serial@293a0000 Err: serial@293a0000 Net: Warning: ethernet@29950000 (eth0) using random MAC address - 96:35:88:62:e0:44 eth0: ethernet@29950000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09board: gateworks: venice: add board model to dtTim Harvey1-0/+8
Add the specific board model from EEPROM config to the device-tree to make it easier to access from Linux userspace. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09mx28evk: Convert to driver modelFabio Estevam2-77/+1
Make the conversion to driver model as it is mandatory. Successfully tested booting Linux from the SD card. Dropped support for networking and splash screen as these need to be properly converted to DM and tested. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-08-09board: gateworks: venice: add imx8mm-gw7902 supportTim Harvey3-2/+526
The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring: - LPDDR4 DRAM - eMMC FLASH - Gateworks System Controller - LTE CAT M1 modem - USB 2.0 HUB - M.2 Socket with USB2.0, PCIe, and dual-SIM - IMX8M FEC - PCIe based GbE - RS232/RS485/RS422 serial transceiver - GPS - CAN bus - WiFi / Bluetooth - MIPI header (DSI/CSI/GPIO/PWM/I2S) - PMIC Do the following to add support for it: - add dts - add PMIC config Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09board: gateworks: venice: add board model/serial# to envTim Harvey3-31/+41
Add board model/serial# strings to env. Move the creation of the strings to gsc_read() and the display of the info into gsc_info() so they are available to U-Boot proper. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09board: gateworks: venice: use bus numbers vs namesTim Harvey3-11/+17
replace looking up i2c bus name by bus number and define bus numbers and eeprom address with #defines. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09board: gateworks: venice: get mem size from dtTim Harvey1-14/+14
Get mem size from dt which SPL updated per EEPROM config. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09warp: Use the correct symbol for CONFIG_IMX_HABFabio Estevam1-1/+1
The intention of commit d714a75fd4dc ("imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HAB") was to convert from CONFIG_SECURE_BOOT to CONFIG_IMX_HAB, but it replaced with an extra "_" character. Fix it by using the correct CONFIG_IMX_HAB symbol. Fixes: d714a75fd4dc ("imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HAB") Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-08-09imx: ventana: add support for GW54xx-G revisionTim Harvey1-0/+19
The GW54xx-G revision has the foolowing changes: - replaces the EOL GbE PHY with an updated part (requires an enable pin) - replaces the EOL analog video decoder with an updated part (requires dt prop) - add power control to miniPCIe socket Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: add support for GW53xx-G revisionTim Harvey1-0/+19
The GW53xx-G revision has the foolowing changes: - replaces the EOL GbE PHY with an updated part (requires an enable pin) - replaces the EOL analog video decoder with an updated part (requires dt prop) - add power control to miniPCIe socket Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: add GW5913 supportTim Harvey3-0/+57
The GW5913 is a Single Board Computer based on the NXP i.MX6Q/DL SoC with the following features: - DDR3 DRAM - NAND FLASH (256MiB or 2048MiB) - Gateworks System Periperhal Controller - front panel LED's - front panel pushbutton - Digital I/O connector (I2C/GPIO/UART) - u-blox Zoe-M8Q GPS - 1x RJ45 GbE - 1x MiniPCIe socket with PCIe USB 2.0 and nanoSIM socket - Passive PoE and wide-range DC power supply Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: add GW5912 supportTim Harvey3-1/+32
The GW5912 is a Single Board Computer based on the NXP i.MX6Q/DL SoC with the following features: - DDR3 DRAM - NAND FLASH (256MiB or 2048MiB) - microSD socket - Gateworks System Periperhal Controller - front panel LED's - front panel pushbutton - RS232 connector (2x UARTs) - CAN/RS485 connector - Digital I/O connector (I2C/GPIO) - SPI connector - u-blox Zoe-M8Q GPS - LIS2DE12 Accellerometer - 1x FEC GbE RJ45 with 802.3at Active PoE - 1x PCI GbE RJ45 with Passive PoE - 5x MiniPCIe socket with PCIe/USB 2.0 - 1x MiniPCIe socket with PCIe/USB 2.0 and SIM socket - Aux power input with wide-range DC power supply Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: add GW5910 supportTim Harvey3-0/+50
The GW5910 is a Single Board Computer based on the NXP i.MX6Q/DL SoC with the following features: - DDR3 DRAM - NAND FLASH (256MiB or 2048MiB) - microSD socket - Gateworks System Periperhal Controller - front panel LED's - front panel pushbutton - RS232 connector (2x UARTs) - Digital I/O connector (I2C/GPIO) - SPI connector - u-blox Zoe-M8Q GPS - LIS2DE12 Accellerometer - TI CC1352 ARM Cortex-M4 multiprotocol sub-1GHz / 2.4GHz wireless MCU - On-board brcmfmac WiFi and BT module - RGMII RJ45 GbE - 1x MiniPCIe socket with PCIe/USB 2.0 - 1x MiniPCIe socket with USB 2.0 and nanoSIM socket - Passive PoE and wide-range DC power supply Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: use dt for hwmonTim Harvey1-59/+113
Use dt-bindings for GSC hwmon devices. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: remove hard-coded flexcan standby pinTim Harvey1-21/+0
Flexcan pinmux is configured in kernel dt. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: remove hard-coded analog video codec enableTim Harvey2-26/+0
Analog video codec enable is configured in kernel dt. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: remove hard-coded USB OTG pinmuxTim Harvey1-7/+0
pinmux is now done via dt. Add missing OTG_OC pinmux for boards that use it. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: remove hard-coded PCI resetTim Harvey3-62/+0
PCIe reset configuration is handled via dt now. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: remove hard-coded USB HUBRST# gpio configTim Harvey1-10/+0
The USB HUB reset is handled via dt now. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: replace hard-coded LED config with dt based configTim Harvey2-150/+0
Use device-tree LED config instead of hard-coded board-specific config. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: remove nand field from common ventana structTim Harvey3-18/+4
NAND fdt fixups can be performed without knowing if NAND is present. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: move wdog/uhs-i board/revision dt fixupsTim Harvey4-157/+141
Move board/revision specific dt fixups for WDOG and UHS-I features so that we can call them early for U-Boot control dt as well. Additionally drop a deprected non-mainline dt-prop fixup regarding HDMI input format. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: ignore EEPROM config when checking for NAND supportTim Harvey1-1/+1
EEPROM bits no longer indicate support for NAND so instead use hard-coded value from board config struct. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09board: colibri_vf: fix compiling warningOleksandr Suvorov1-1/+1
This patch fixes the following compiler warning: ============= board/toradex/colibri_vf/colibri_vf.c: In function 'ft_board_setup': board/toradex/colibri_vf/colibri_vf.c:436:6: warning: unused variable 'ret' [-Wunused-variable] ============= Fixes: be3f1a56bf8 ("video: fsl_dcu_fb: add DM_VIDEO support") Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-08-09board: colibri_imx6: add board_fit_config_name_match to support FIT in SPLMing Liu1-0/+10
Only one dtb is currently supported, so match with imx6-colibri. Signed-off-by: Ming Liu <ming.liu@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-08-09board: toradex: make USB PID from config block optionalStefan Agner2-1/+11
If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-08-09board: colibri_imx7: use SDP if USB serial downloader has been usedStefan Agner1-0/+10
In case USB serial downloader has been used to load U-Boot start the serial download protocol (SDP) emulation. This allows to download complete images such as Toradex Easy Installer over USB SDP as well. This code uses the boot ROM provided boot information to reliably detect USB serial downloader. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-08-08ARM: renesas: Mallocate bootparams on Gen3Marek Vasut6-18/+0
The bootparams do not have to be at fixed location, they can be dynamically mallocated instead. Make it so to get rid of another fixed assignment. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Biju Das <biju.das.jz@bp.renesas.com> Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
2021-08-06ppc: Drop idt8t49n222a_serdes_clk driverSimon Glass3-315/+0
This is not used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-06pci: Drop pci_init_board()Simon Glass5-240/+0
With the conversion to driver model, this is not needed now. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-05ppc: socrates: Drop use of DM_PCISimon Glass1-3/+1
Now that DM_PCI is always enabled we don't need to check it. Drop this old code. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-05ppc: malta: Drop use of DM_PCISimon Glass1-67/+0
Now that DM_PCI is always enabled we don't need to check it. Drop this old code. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-05pci: freescale: Drop old codeSimon Glass16-351/+0
Drop this old pre-driver model code. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-03Merge https://source.denx.de/u-boot/custodians/u-boot-samsungTom Rini4-88/+77
2021-08-02global: Convert simple_strtoul() with decimal to dectoul()Simon Glass21-57/+55
It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-08-12 20:46:46 +0000