aboutsummaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)AuthorFilesLines
2022-02-08imx: Don't define __ASSEMBLY__ in source filesSimon Glass58-60/+0
This is supposed to be a build-system flag. Move it there so we can define it before linux/kconfig.h is included. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-02-08Nokia RX-51: Convert to CONFIG_DM_KEYBOARDPali Rohár1-5/+32
Signed-off-by: Pali Rohár <pali@kernel.org>
2022-02-08board: ti: j721e: evm.c: Add support for probing SerDes0Aswath Govindraju1-0/+37
Add support for probing, initializing and powering, SerDes0 instance. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2022-02-08board: ti: j721s2: Add board support for J721S2David Huang4-0/+267
Add board support for J721S2 SoC. Signed-off-by: David Huang <d-huang@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2022-02-07board: toradex: add verdin imx8m plus supportMarcel Ziswiler7-0/+2540
This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board supportHeiko Thiery9-0/+4248
The Kontron pitx-imx8m is an NXP i.MX8MQ based board in the pITX form factor. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-02-05imx: imx8mn_beacon: Remove redundant codeAdam Ford1-5/+0
The function to return the default MMC device for the environment already has a __weak instance doing exactly the same thing. Remove the superfluous one. Signed-off-by: Adam Ford <aford173@gmail.com>
2022-02-05imx: imx8mm_beacon: Remove redundant codeAdam Ford1-5/+0
The function to return the default MMC device for the environment already has a __weak instance doing exactly the same thing. Remove the superfluous one. Signed-off-by: Adam Ford <aford173@gmail.com>
2022-02-05imx: imx8mn_beacon: Enable TrustZoneAdam Ford1-0/+2
When the board was added, enabling tzc380 was left off by mistake. Signed-off-by: Adam Ford <aford173@gmail.com>
2022-02-05smegw01: Update DDR initializationFabio Estevam1-16/+39
Sync with the latest DDR initialization from Phytec, which uses version 1.2 of NXP's i.MX7D DRAM Register Programming Aid spreadsheet. This updated DDR initialization fixes occasional system freeze. Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-02-05imx8mn-ddr4-evk: generate single bootable imageAndrey Zhizhikin1-1/+1
As suggested in commit 028abfd9b157 ("imx8mm-evk: Generate a single bootable flash.bin again") for imx8mm_evk, it is possible to produce single bootable image via binman. This restores the original behavior in distros, where only one boot container is used to create target image. Perform similar adaptions in order to provide single bootable image for imx8mn-ddr4-evk derivate. Update documentation to drop additional step of copying u-boot.itb Fixes: 353dfe4b4359 ("imx8mn-ddr4-evk: switch to use binman") Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05arm: xea: config: Provide special defconfig for a single binary u-bootLukasz Majewski1-0/+1
The new configs/imx28_xea_sb_defconfig is introduced to facilitate building the single binary u-boot.sb fox XEA board. The biggest distinction from "normal" XEA imx28_xea_sb_defconfig is support for USB mass storage devices (pen drives). To achieve that, the CONFIG_DM_USB is enabled and supported. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2022-02-05arm: xea: Modify board code to generate single binary u-bootLukasz Majewski2-1/+8
This change provides the possibility to build XEA (imx287 based) board U-Boot as a single binary (without support for CONFIG_SPL_FRAMEWORK). The generated u-boot.sb can be used in the factory environment to for example perform initial setup or HW testing. It can be used with 'uuu' utility (SDPS: boot -f /srv/tftp/xea/u-boot.sb) In the configs/imx28_xea_defconfig one needs to disable following configs: # CONFIG_SPL_BLK is not set # CONFIG_SPL_FRAMEWORK is not set The board_init_ll() is used in arch/arm/cpu/arm926ejs/mxs/start.S, which is utilized when CONFIG_SPL_FRAMEWORK is disabled. However, when it is enabled - the arch/arm/cpu/arm926ejs/start.S is used, which requires the lowlevel_init() function. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2022-02-05imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO boardAriel D'Alessandro7-0/+697
Add support for iMX8MN VAR-SOM-MX8M-NANO board. Enables support for: - 1GiB DDR4 RAM - 16 GiB eMMC - SD card - Gigabit ethernet - USBOTG1 peripheral - fastboot Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05arm: imx8m: imx8mm-cl-iot-gate: detect extension boardYing-Chun Liu (PaulLiu)1-0/+333
Extension boards can be added to Compulab's iot-gate-imx8mm. We implement extension board manager for detecting the extension boards. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: uboot-imx <uboot-imx@nxp.com>
2022-02-05imx8ulp: Workaround LPOSC_TRIM fuse load issueYe Li1-0/+6
8ULP ROM should read the LPOSC trim BIAS fuse to fill the CGC0 LPOSCCTRL[7:0], but it writes a fixed value on A0.1 revision. A0.2 will fix the issue in ROM. But A0.1 we have to workaround it in SPL by setting LPOSCCTRL BIASCURRENT again. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05imx8ulp: Fix DCNANO QoS settingYe Li1-0/+3
The setting does not have effect because we should set it after power on the PS16 for NIC AV. So move it after upower_init which has powered on all PS Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05imx8ulp_evk: Control LPI2C0 PCA6416 and TPM0 for displayYe Li1-0/+56
The board use IO9 of PCA6416 on LPI2C0 and TPM0 for MIPI DSI MUX and backlight. However the LPI2C0 and TPM0 are M33 resources, in this patch we simply access them, but this is a temporary solution. We will modify it when M33 FW changes to set MIPI DSI panel as default path and enable backlight after reset. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05mx7ulp_com: add support for SPLRicardo Salveti1-0/+26
Add EA iMX7ULP COM board support for building SPL. Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2022-02-03Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini2-2/+7
This is the promised second part of the sunxi PR for 2022.04, albeit technially outside of the merge window. We were working on this full steam since the beginning of the year, and it deserves to be merged, I think. The main attraction is support for the F1C100s SoC, which sports a venerable ARM926 core. Support for this SoC and the LicheePi Nano board has been in Linux for years, and U-Boot patches were posted mid last year already. The new SoC using ARMv5 also means that the bulk of the new code should not touch any existing boards, although we did some refactorings first, of course, which actually cleans up some existing sunxi code. Compile tested for all 160 sunxi boards, and briefly tested on BananaPi M1, OrangePi Zero, Pine64 and Pine-H64. Tested by others on their boards, including F1C100s and F1C200s devices.
2022-02-04sunxi: board: Add support for SUNIVIcenowy Zheng1-2/+2
Generic Timer Extension is not available on SUNIV. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-03arm: pdu001: Exend the list of maintained filesFelix Brack1-1/+3
Add the PDU001 board specific DT files to MAINTAINERS. This should help for better tracking of changes to these files. Signed-off-by: Felix Brack <fb@ltec.ch>
2022-02-01board: ls1046ardb: force PCI device enumerationMartin Schiller1-0/+4
Commit 045ecf899252 ("configs: enable DM_ETH support for LS1046ARDB") resulted in the PCI bus no longer being implicitly enumerated. However, this is necessary for the fdt pcie fixups to work. Therefore, similar to commit 8b6558bd4187 ("board: ls1088ardb: transition to DM_ETH"), pci_init() is now called in the board_init() routine when CONFIG_DM_ETH is active. Signed-off-by: Martin Schiller <ms@dev.tdt.de> CC: Priyanka Jain <priyanka.jain@nxp.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01board: ls1088a: update ifc node name to be memory-controllerJianpeng Bu1-5/+5
IFC-NOR and QSPI are muxed on SoC. So disable IFC node in dts if QSPI is enabled or disable QSPI node in dts in case QSPI is not enabled. "ifc/nor" will be changed to "memory-controller/nor" in linux. So need to modify "ifc/nor" to "memory-controller/nor" in fdt_path_offset(). Signed-off-by: Jianpeng Bu <jianpeng.bu@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01board: ls1043ardb: force PCI device enumerationMartin Schiller1-0/+4
Commit eb1986804d1d ("configs: enable DM_ETH support for LS1043ARDB") resulted in the PCI bus no longer being implicitly enumerated. However, this is necessary for the fdt pcie fixups to work. Therefore, similar to commit 8b6558bd4187 ("board: ls1088ardb: transition to DM_ETH"), pci_init() is now called in the board_init() routine when CONFIG_DM_ETH is active. Signed-off-by: Martin Schiller <ms@dev.tdt.de> CC: Priyanka Jain <priyanka.jain@nxp.com> CC: Camelia Groza <camelia.groza@nxp.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01km/ls102xa: use unused scratchrw4 address for post wordAleksandar Gerasimovski1-6/+5
The SCRATCHRW4 is only used in secure boot scenario that is unsupported by our design, so this address can be stolen for storing POST status. The SCRATCHRW4 is initialized to zero at core rest. Using a DDR address was unfortunate choice, the DDR at boot time has a random contend and it happens that sometimes is matching POST magic number. This behavior can lead to undefined POST behavior and u-boot ending in failbootcmd command. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01configs/expu1: add u-boot update defconfigAleksandar Gerasimovski1-0/+1
This patch adds default defconfig for u-boot update version, the u-boot update defconfig is a copy of the default (factory) defconfig with: - adapted text base and environment addresses - explicit flag that this is a field updated u-boot version At the time of implementation this version is only used to verify the update procedure, in future depend on the needs this defconfig can be extended with additional options. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01km/ls102xa: fix device disable configurationAleksandar Gerasimovski1-2/+1
This was probably broken when mainlining, CONFIG_FSL_DEVICE_DISABLE is not Kconfig but whitelisted. It's fine to be without flag as this is always enabled for abec1020 (pg-wcom-ls102xa.h) Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01configs/seli8: add u-boot update defconfigAleksandar Gerasimovski1-0/+1
This patch adds default defconfig for u-boot update version, the u-boot update defconfig is a copy of the default (factory) defconfig with: - adapted text base and environment addresses - explicit flag that this is a field updated u-boot version At the time of implementation this version is only used to verify the update procedure, in future depend on the needs this defconfig can be extended with additional options. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01km/ls102xa: add support for field fail-safe u-boot updateAleksandar Gerasimovski1-0/+7
Field fail-safe u-boot update procedure for pg-wcom boards is defined and implemented by patch: 59b3403. This patch invokes the update procedure for pg-wcom-ls102x designs during early misc_init_f execution. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01km: common: implement field fail-safe u-boot updateAleksandar Gerasimovski4-0/+104
This patch provides possibility for field fail-safe u-boot updates. The implementation can be used on all pg-wcom boards that are booting from parallel NOR flash. When used in a board design, provided check_for_uboot_update function will start new u-boot at defined location if updateduboot envvar is set to yes. With this implementation it is expected that factory programmed u-boot will always stay as it is, and optionally new u-boot can be safely programmed by embedded software when the unit is rolled out on the field. It is expected check_for_uboot_update to be called early in execution before relocation (*_f) once SoC is basically initialized and environment can be read, with this possibilities to not be able to fix a u-boot bug by a u-boot update are reduced to minimum. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01km: qrio: add access functions for ebootcountAleksandar Gerasimovski2-0/+41
The EBOOTCNT is a reserved persistent static memory area in QRIO, and similar to BOOTCNT is intended to be used as boot counter location. Comparable to BOOTCNT that is reserved for u-boot main bootcount infrastructure, EBOOTCNT is intended to be used for pg-wcom board specific purposes (e.g implementing early boot counter for fail-safe u-boot update). Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01km/ls102xa: dbg phy prst depends on piggy presenceAleksandar Gerasimovski1-1/+3
The PHY for the debug interface was placed on the board for the pg_wcom_ls102x. Hence only when a piggy is plugged, a RJ45 jack including magnetics is connected to the MDI of the PHY. Without a piggy the MDI lines are left floating and it does not make sense to have an active debug PHY. In case of expu1 an active PHY without a piggy even led to increased jitter for syncE. This patch only deactivates the prst line of the debug PHY when a piggy is detected persent. Signed-off-by: Rainer Boschung <rainer.boschung@hitachienergy.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01km: qrio: add function to read PGY_PRES pin statusAleksandar Gerasimovski2-0/+14
It is necessary to read the status of the PGY_PRES pin so that u-boot can react accordingly. Signed-off-by: Rainer Boschung <rainer.boschung@hitachienergy.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01km/ls102xa: use qrio selftest_pin for reading selftestAleksandar Gerasimovski1-3/+2
QRIO library now supports direct read of the test pin status. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01km: qrio: add function to read SLFTEST pin statusAleksandar Gerasimovski2-0/+14
There is a request from HW designers to use this QRIO pin for detecting DIC26_SELFTEST status instead of a GPIO pin. This pin is typically used during production for executing POST tests and starting test ESW bank. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01board: traverse: add initial Ten64 supportMathew McBride5-0/+516
The Ten64 is a networking-oriented MiniITX board using the NXP LS1088A SoC. This patch provides the bare minimum to support Ten64 boards under U-Boot for distroboot. Some related drivers have not yet been submitted and this basic support lacks some of the opinionated defaults provided by our firmware distribution. Signed-off-by: Mathew McBride <matt@traverse.com.au> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01board: traverse: add Ten64 board controller driverMathew McBride4-0/+275
Traverse Technologies Ten64 family boards use a microcontroller to control low level board functions like startup and reset, as well as holding details such as the board MAC address. Communication between the CPU and microcontroller is via I2C. To keep the driver structure clean between the Ten64 board file, DM_I2C, and a future utility command, this driver has been implemented as a misc uclass device. Signed-off-by: Mathew McBride <matt@traverse.com.au> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-01-31arm: kirkwood: GoFlex Home : Use Marvell uclass mvgbe and PHY driver for ↵Tony Dinh1-73/+11
Ethernet The GoFlex Home board has the network chip Marvell 88E1116R. Use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Enable CONFIG_PHY_MARVELL to properly configure the network. - Miscellaneous changes: use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, use BIT macro, and cleanup comments. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-31arm: kirkwood: Pogoplug-V4 : Add board implementation filesTony Dinh4-0/+312
Add board header, defconfig, and implementation files for Pogoplug V4. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Pali Rohár <pali@kernel.org>
2022-01-31arm: kirkwood: Pogoplug-V4 : Add Kconfig filesTony Dinh1-0/+16
Add Kconfig files for Pogoplug V4 board Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Pali Rohár <pali@kernel.org>
2022-01-31arm: mvebu: Espressobin: Fix URLs in commentsPali Rohár1-2/+2
Use versioned URLs for line numbers as branches are moving in the time and use master branch for mv-ddr-marvell where is up-to-date code. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-30Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiWIP/30Jan2022Tom Rini3-4/+17
a bit delayed, the first batch of the sunxi pull request for this cycle. This is mostly collecting some patches that were lying around for a while, plus some recent fixes. Nothing too exciting at this point, but of course they should be merged nevertheless. There is the much bigger F1C100s SoC support coming up, which I hope to be able to send in the next few days, along with the removal of sunxi's lowlevel_init usage. Compile tested for all 159 sunxi boards, plus briefly tested on BananaPi M1, OrangePi Zero, Pine64 and Pine-H64.
2022-01-30sunxi: Add option to prevent booting on power plug-inChris Morgan1-0/+11
For sunxi boards with the AXP209, AXP221, AXP809, and AXP818 PMICs (plus possibly others, I only confirmed the datasheets for these), it is sometimes desirable to not boot whenever the device is plugged in. An example would be when using the NTC CHIP inside a PocketCHIP. This provides a configurable option to check if bit 0 of register 0 of the PMIC says it was powered because of a power button press (0) or a plug-in event (1). If the value is 1 and this option is selected, the device shuts down shortly after printing a message to console stating the reason why it's shutting down. Powering up the board with the power button is not affected. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> [Andre: reword to speak of boot, remove #ifdefs] Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-01-30sunxi: dram_sun4i/5i: use DRAM_MEMORY_TYPE_DDR3 instead of magic number 3Giulio Benetti2-2/+2
Since DRAM_MEMORY_TYPE_DDR3 is defined let's use it instead of magic number 3. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-01-30sunxi: call fdt_fixup_ethernet again to set macaddr for more aliasesIcenowy Zheng1-2/+4
Sometimes some ethernet aliases do not exist in U-Boot DT but they exist in the DT used to boot the system (for example, modified via DT overlays). In this situation setup_environment is called again in ft_board_setup() to generate macaddr environment variable for them. However now the call to fdt_fixup_ethernet() is moved before the call of ft_board_setup(). Call fdt_fixup_ethernet() again to add MAC addresses for the extra ethernet aliases. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> [updated commit message] Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-01-29Nokia RX-51: Convert documentation to rst formatPali Rohár1-1/+1
Convert documentation to rst format Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-24board: stm32mp1: solve compilation issue when ENV_IS_IN_MMC is deactivatedPatrick Delaunay1-2/+4
Solve compilation issue on undefined CONFIG_SYS_MMC_ENV_DEV when CONFIG_ENV_IS_IN_MMC is deactivated on STMicroelectronics boards defconfig Fixes: 9f97193616f1 ("board: stm32mp1: use CONFIG_SYS_MMC_ENV_DEV when available") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-01-24stm32mp: fix board_get_alt_info_mmc()Heinrich Schuchardt1-1/+1
MAX_SEARCH_PARTITIONS is the highest possible partition number. Do not skip the last partition in board_get_alt_info_mmc(). Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-01-22arm: rmobile: rzg2_beacon: Migrate reset to SYSRESET_PSCIAdam Ford1-10/+0
Instead of a custom cpu_reset function, use the sysreset_psci instead to reduce redundant code clutter. Signed-off-by: Adam Ford <aford173@gmail.com>
generated by cgit v1.1 at 2024-07-13 19:22:29 +0000