aboutsummaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)AuthorFilesLines
2021-02-15ppc: Remove MPC8610HPCD boardTom Rini9-612/+0
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-15ppc: Remove MPC8572DS boardTom Rini10-757/+0
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-15ppc: Remove MPC8544DS boardTom Rini9-645/+0
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-15arm: Remove db-88f6281-bp boardTom Rini6-177/+0
This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Chris Packham <judge.packham@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Chris Packham <judge.packham@gmail.com>
2021-02-15arm: Remove ls2080a_simu boardTom Rini7-480/+0
This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-15arm: Remove mx35pdk boardTom Rini7-716/+0
This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefano Babic <sbabic@denx.de>
2021-02-15arm: Remove apx4devkit boardTom Rini5-325/+0
This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Lauri Hintsala <lauri.hintsala@bluegiga.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Lauri Hintsala <lauri.hintsala@silabs.com<mailto:lauri.hintsala@silabs.com>> Signed-off-by: Tom Rini <trini@konsulko.com<mailto:trini@konsulko.com>>
2021-02-10board: amlogic: odroid: add runtime detection of the N2/N2+/C4/HC4 variantsMarek Szyprowski1-0/+80
Use the ADC channel 1 to check the hardware revision of the board and detect the N2 vs. N2+ and the C4 vs. HC4 variants. Each of them use different dtb file, so adjust fdtfile environment variable to the detected variant. The ADC min/max values for each variant are taken from the vendor code, adjusted to the 12-bit ADC driver operation mode (vendor code use 10-bit mode). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-02-08Merge git://git.denx.de/u-boot-marvellWIP/08Feb2021Tom Rini2-25/+145
- Espressobin: Set default env values at runtime (Pali) - Espressobin: Set the maximum slave SPI speed to 40MHz (Pali) - theadorable: PCIe test code enhancement and early deemphasis enabling (Stefan) - pci_mvebu: Disable config access to PCI host bridge ports (Stefan) - mv_sdhci: parse device-tree entry (Baruch)
2021-02-08Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini17-33/+690
Layerscape: Enable gpio Bug fixes & updates related to dspi, qspi, pciep, SVR mask, stream-id, env variables, mdio for LAyerscape Platforms Add SATA, network variant 1, 2 support on sl28 powerpc: T1042: drop CONFIG_VIDEO, Add kmcent2 board supporrt, keymile Bug fixes and updates for keymile, Kontron
2021-02-08board/km: move km i2c deblock declarations to a km/common.hAleksandar Gerasimovski1-0/+5
Cleanup, move the declarations to keymile/common.h instead declaring them per-board config.h Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08PowerPC: keymile: Add support for kmcent2 boardNiel Fourie9-0/+613
Add basic support for the Hitachi Power Grids kmcent2 board, based on the NXP QorIQ T1040 SoC. Signed-off-by: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Holger Brunck <holger.brunck@hitachi-powergrids.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> [Fixed blank line at EOF errors] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08keymile: common: update to set_env_hex(), fix "pram" radixNiel Fourie1-16/+6
Replace instances of sprintf()/set_env() for setting hexadecimal values with set_env_hex(). In set_km_env() the "pram" variable was set to an hexadecimal value, while initr_mem() expects an unsigned decimal, so use set_env_ulong() instead. Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Holger Brunck <holger.brunck@hitachi-powergrids.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08board/km/common: fix pnvramaddr and varaddrAleksandar Gerasimovski1-3/+4
Take into account SDRAM_BASE address when calculating pnvramaddr and varaddr offsets. Up to now Keymile designs had SDRAM_BASE equal to zero and the offsets where calculated correctly, this fix is for the upcoming designs that have SDRAM_BASE different then zero. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08keymile: common: qrio: print QRIO id and revision numberAleksandar Gerasimovski2-0/+13
Add show_qrio function to print chip id and revision information. There are already multiple QRIO chip versions available and the upcoming designs may want to show used version. Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08board: keymile: common: fix qrio compilation for armAleksandar Gerasimovski1-3/+4
This patch is fixing qrio driver compilation for ARM architecture: - It includes asm/io.h for in_/out_ access - It use correct names for set/clear_bits as defined in linux/bitops.h Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08board: sl28: add SATA supportMichael Walle4-11/+41
Enable SATA support. Although not supported by the usual SATA pins on the SMARC baseboard connector, SATA mode is supported on a PCIe lane. This way one can use a mSATA card in a Mini PCI slot. We need to invert the received data because in this mode the polarity of the SerDes lane is swapped. Provide a fixup in board_early_init_f() for the SPL. board_early_init_f() is then not common between SPL and u-boot proper anymore, thus common.c is removed, as it just contained said function. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08board: sl28: add network variant 2 supportMichael Walle1-0/+2
Although this variant has two external network ports, they are not (yet) supported by the bootloader because they are connected via an internal network switch. Otherwise its the same as the other variants. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08board: sl28: add network variant 1 supportMichael Walle1-0/+2
This variant has one network port connected via RGMII and doesn't have any TSN capabilities out-of-the-box. Instead it has all four SerDes lanes available for customer use. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08arm: mvebu: theadorable: Set deephasis bit in PCIe configs very earlyStefan Roese1-0/+24
Testing has shown, that the quality of the PCIe signals and also the stability of correct link establishment on the 2 PCIe ports is better, when the deemphasis bit is set in the PCIe config register. This needs to be done very early, even before the SERDES setup code is run. This way, the first link will already be established with this setup. Signed-off-by: Stefan Roese <sr@denx.de>
2021-02-08arm: mvebu: theadorable: Enhance "pcie" test cmd to check link width/speedStefan Roese1-21/+87
This patch changes the board specific "pcie" U-Boot command to not only check for PCIe device existance but also for the correct link speed and width that has been established. This cmd can be used by U-Boot scripts for automated testing, if the PCIe setup is correct. Meaning, that all PCIe devices are correctly detected and the link speed and width is corrent. Signed-off-by: Stefan Roese <sr@denx.de>
2021-02-08arm: mvebu: Espressobin: Set default value for $ethNaddr env variablePali Rohár1-0/+19
On Espressobin board are MAC addresses stored in U-Boot env area. Therefore they are not present in default_environment[] array constructed at compile time. This change puts permanent MAC addresses into default_environment[] array at board runtime. Espressobin board has enabled DEFAULT_ENV_IS_RW option and therefore can modify this array. This change ensure that 'env default -a' does not delete permanent MAC addresses from Espressobin env storage area. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Andre Heider <a.heider@gmail.com>
2021-02-08arm: mvebu: Espressobin: Set default value for $fdtfile env variablePali Rohár1-4/+15
On Espressobin board value for $fdtfile cannot be determined at compile time and is calculated at board runtime code. This change uses a new option DEFAULT_ENV_IS_RW to allow modifying default_environment[] array at runtime and set into it correct value. This change also ensure that 'env default -a' set correct value to $fdtfile. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Andre Heider <a.heider@gmail.com>
2021-02-07ARM: rmobile: Add Beacon EmbeddedWorks RZG2H Dev KitAdam Ford2-1/+2
The Beacon EmbeddedWorks kit is based on the R8A774E1 SoC also known as the RZ/G2H. The kit consists of a SOM + Baseboard and supports microSD, eMMC, Ethernet, a couple celular radios, two CAN interfaces, Bluetooth and WiFi. It shares much of the same design as the RZ/G2M and RZ/G2N dev kits. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-02-07ARM: rmobile: Add Beacon EmbeddedWorks RZG2N Dev KitAdam Ford2-1/+2
The Beacon EmbeddedWorks kit is based on the R8A774B1 SoC also known as the RZ/G2N. The kit consists of a SOM + Baseboard and supports microSD, eMMC, Ethernet, a couple celular radios, two CAN interfaces, Bluetooth and WiFi. It shares much of the same design as the RZ/G2M dev kit. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-02-06x86: coral: Add sysinfo opsSimon Glass1-0/+5
These ops are missing at present which is not permitted. Add an empty operation struct. Note: If the uclass requires operations then the drivers should provide them. Otherwise, checking for missing operations must be done in every uclass operation, so it adds to code size. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-02-05Merge tag 'ti-v2021.04-rc2' of ↵WIP/05Feb2021Tom Rini2-65/+57
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Sync DTS from Linux kernel for all K3 platforms - Add MMC higher speed nodes for AM65x, J721e, J7200 - Convert Nokia RX-51 to use CONFIG_DM_MMC - Minor fixes for LEGO MINDSTORMS
2021-02-04ARM: legoev3: drop bi_arch_numberDavid Lechner1-4/+0
This drops assigning bi_arch_number on LEGO MINDSTORMS EV3. This board never had its own unique number and since we are using device tree, we no longer need to pass an arch number to Linux. Signed-off-by: David Lechner <david@lechnology.com>
2021-02-04ARM: legoev3: set serial# env varDavid Lechner1-46/+39
This sets the serial# environmet variable instead of using ATAGs on LEGO MINDSTORMS EV3. Also fix some nomenclature while we are touching this code (Bluetooth address is not the same as MAC address, EEPROM version is not the same as board version). Signed-off-by: David Lechner <david@lechnology.com>
2021-02-04Nokia RX-51: Convert to CONFIG_DM_MMCPali Rohár1-15/+18
Move twl4030_power_mmc_init() from board_mmc_power_init() to misc_init_r() and disable CONFIG_SYS_MALLOC_F. Otherwise U-Boot cannot initialize MMC. Also disable CONFIG_CMD_SLEEP CONFIG_DM_DEVICE_REMOVE CONFIG_MMC_VERBOSE to free some space. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-02-03riscv: ax25-ae350: Cast addr with uintptr_tBin Meng1-1/+1
addr was delcared as fdt_addr_t which is now a 64-bit address. In a 32-bit build, this causes the following warning seen when building ax25-ae350.c: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Cast addr with uintptr_t. Signed-off-by: Bin Meng <bin.meng@windriver.com>
2021-01-27arm: mvebu: Espressobin: Disable slot when emmc is not presentPali Rohár1-3/+12
This change extends previous commit 061c6d1b238a ("arm: mvebu: Espressobin: Detect presence of emmc at runtime") and when emmc is not present then emmc is removed from U-Boot DM and corresponding slot is disabled. Therefore on Espressobin board without soldered emmc, state of emmc hw should be same as if emmc was disabled in DTS. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-01-27ARM: mvebu: ClearFog make sure that SATA and UART images are buildableDennis Gilmore1-2/+2
SATA and UART ClearFog imaages are not buildable as ENV_SECT_SIZE is not defined set values for both possible targets Signed-off-by: Dennis Gilmore <dennis@ausil.us>
2021-01-27ARM: mvebu: helios4 adjust env sizes to enable SPI to workDennis Gilmore1-0/+24
mirror the clearfog setup to enable SPI to work Signed-off-by: Dennis Gilmore <dennis@ausil.us>
2021-01-25Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiWIP/25Jan2021Tom Rini2-15/+49
- New Allwinner H616 SoC support (sans Ethernet & USB) - H6 DT update - Tanix TX6 TV box support - OrangePi 3 support - OrangePi Zero2 (H616) support
2021-01-25sunxi: Add support for OrangePi Zero2Jernej Skrabec1-0/+5
OrangePi Zero2 is SBC based on Allwinner H616 with 1 GiB of RAM, SD card support, gigabit ethernet, micro HDMI, WIFI, Bluetooth and 1 USB 2.0 port. It also has two GPIO headers which allows further peripherals to be used. The devicetree file is taken from v3 of the OrangePi Zero2 Linux submission [1], which it's not yet merged. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2021-January/632084.html Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-25sunxi: add support for R_I2C on H616Jernej Skrabec1-0/+4
This port is needed for communication with PMIC. SPL uses it to set DRAM voltage on H616 boards. Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-25sunxi: Add support for AXP305 PMICJernej Skrabec1-3/+7
This PMIC can be found on H616 boards and it's very similar to AXP805 and AXP806. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-25sunxi: Properly check for SATAPWR and MACPWRAndre Przywara1-12/+22
The #ifdef CONFIG_xxxPWR conditionals were not working as expected, as string Kconfig symbols are always "defined" from the preprocessor's perspective. This lead to unnecessary calls to the GPIO routines, but also always added a half a second delay to wait for a SATA disk to power up. Many thanks to Peter for pointing this out! Fix this by properly comparing the Kconfig symbols against the empty string. strcmp() would be nicer for this, but GCC does not optimise this away, probably due to our standalone compiler switches. Reported-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Samuel Holland <samuel@sholland.org> # Orange Pi WinPlus Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
2021-01-25sunxi: Add support for Orange Pi 3Andre Heider1-0/+5
dts file is taken from Linux 5.11-rc1 tag. The Bluetooth controller of this device ships with a default address, use the new CONFIG_FIXUP_BDADDR option to fix it up. Signed-off-by: Andre Heider <a.heider@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> [Updated OrangePi 3 DT, rebase and config update] Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-25sunxi: Add support for Tanix TX6Jernej Skrabec1-0/+6
This commit adds support for Tanix TX6 TV box, based on H6. It's low end H6 board, with 3 GiB of RAM, eMMC, fast ethernet, USB, IR and other peripherals. DT file is taken from Linux 5.11-rc1 release. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-25Merge tag 'mips-pull-2021-01-24' of ↵Tom Rini4-0/+30
https://gitlab.denx.de/u-boot/custodians/u-boot-mips - MIPS: add support for Mediatek MT7620 SoCs
2021-01-25Merge tag 'u-boot-imx-20210125' of ↵Tom Rini19-78/+3871
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Changes for 2020.04 ------------------- - new board: Phytec phyCORE-i.MX8MP i.MX8MN Beacon EmbeddedWorks devkit - Fixes: several nanbcb fixes fix for imx8mm_beacon - further switch to distro boot commands - DM: DM Ether for MX6UL CI: https://gitlab.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/6013
2021-01-25Merge tag 'u-boot-atmel-2021.04-b' of ↵Tom Rini1-0/+6
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel Second set of u-boot-atmel features for 2021.04 cycle This feature set includes macb updates for all interfaces and new sama7g5 variant support; micrel ksz9031 DLL support; a new board from Giant based on Adafruit feather form factor which contains a SAMA5D27 SoC; several fixes regarding the NAND flash PMECC block; and pincontrol drive strength support for pio4 controller.
2021-01-24mips: mtmips: add two reference boards for mt7620Weijie Gao4-0/+30
The mt7620_rfb board supports integrated 10/100M PHYs plus two external giga PHYs. It also has 8MB SPI-NOR, mini PCI-e x1 slot, SDHC and USB. The mt7620_mt7530_rfb boards supports an external MT7530 giga switch and a 16MB SPI-NOR flash. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-01-23imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit.Adam Ford7-0/+1694
Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2021-01-23arm: dart6ul: fix ddr size macroMarc Ferland1-2/+2
The previous macro was off by one bit and so we were getting a ddr size which was twice the real size. This commit refactors the macro so it returns the right size in _bytes_ and modifies the printf call so the size is still printed in MiB. Signed-off-by: Marc Ferland <ferlandm@amotus.ca>
2021-01-23board: phytec: imx8mp: Add PHYTEC phyCORE-i.MX8MP supportTeresa Remmet6-0/+2049
Add initial support PHYTEC phyCORE-i.MX8MP SOM. Supported features: - 2GB LPDDR4 RAM - eMMC - external SD - debug UART2 - watchdog Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-01-23arm: dart6ul: enable DM_ETH for the dart6ulMarc Ferland2-74/+1
This patch converts the dart6ul ethernet support to DM_ETH and cleans up the legacy ethernet code. The clean up, more specifically: * moves the fec2 node and pin definition to the carrier board DTS since the phy associated with it is on the carrier board and not on the SoM; * add the reset pin associated to each phy; * separate the ethernet, mdio and reset pins of each fec so that they are easier to reference; * add clock properties to the phy nodes since they are connected to the 50Mhz ENET[12]_TX_CLK clock of the SoC; * remove CONFIG_BOARD_EARLY_INIT_F since the function is now empty. Signed-off-by: Marc Ferland <ferlandm@amotus.ca>
2021-01-23board: imx8mp: add boot.cmd for distro boot on iMX8MPAlice Guo1-0/+25
Distro Boot requires a U-Boot-specific script named boot.scr or boot.scr.uimg which contains boot commands to boot the system. The boot.cmd is such a file. Use mkimage to generate boot.scr or boot.scr.uimg from boot.cmd, and the command is: mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Distro Boot Script" -d boot.cmd boot.scr.uimg The boot.cmd file is an example script and can be modified based on needs. bootargs is set in this script and root uses the default value "/dev/mmcblk1p2 rootwait rw" which can be changed by overriding mmcroot. Signed-off-by: Alice Guo <alice.guo@nxp.com>
generated by cgit v1.1 at 2024-07-14 12:00:43 +0000