aboutsummaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)AuthorFilesLines
2020-06-12board: tbs2910: add documentationDenis 'GNUtoo' Carikli1-0/+1
This documents the u-boot installation procedure and the hardware in order to get started. Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org> [trini: Add MAINTAINERS entry for doc file per Soeren's request]
2020-06-08Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini13-1/+28
- DM_ETH support for P2041RDB, T1024RDB, P5040DS, P3041DS, P4080DS, bug fixes - Add TBI PHY access through MII - DDR: Rework errata workaround for A008109, A008378, 009942
2020-06-07rockchip: puma: drop special handling of usb host regulatorHeiko Stuebner1-67/+0
With the current usb stack in u-boot, all host ports on puma work flawlessly without any additional special handling, so drop that usb hub hacking from the puma board. Tested with mass-storage and usb-ethernet on both usb3 and usb2 ports. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2020-06-07rockchip: puma: remove separate fit generatorHeiko Stuebner1-94/+0
The introduction of the puma-specific generator was mainly a way to split the pmu firmware from the ATF binary and not having to distribute that 4GB (sparse) image that was created before moving to the bl31.elf as base. Looking at the publically available repository for that separate pmu firmware https://git.theobroma-systems.com/rk3399-cortex-m0.git/ there is also no activity for 3 years and apart from some build customizations no other changes were done. And even then, if changes need to be made, this can very well also happen in the atf context itself, so there is no real need to diverge from the established build procedure and we can just go back to using the main make_fit_atf.py script. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07rockchip: puma: reorganize devicetrees to actually work and match upstreamHeiko Stuebner1-0/+15
So far the puma dts files only just included the main puma dtsi without handling the actual baseboard and rk3399-puma.dtsi was very much detached from the variant in the mainline Linux kernel. Recent changes resulted in a strange situation with nonworking puma boards. Commit ab800e5a6f28 ("arm: dts: rockchip: puma: move U-Boot specific bits to u-boot.dtsi") moved the sdram include from rk3399-puma-ddrX.dts to new files rk3399-puma-ddrx-u-boot.dtsi which were never included anywhere though. Commit 167efc2c7a46 ("arm64: dts: rk3399: Sync v5.7-rc1 from Linux") replaced the rk3399-puma.dtsi nearly completely, but in the kernel it definitly depends on a baseboard dts to actually enable peripherals like sd-slot, uarts, etc. So to untagle this and bring the whole thing more in line with mainline Linux, bring the rk3399-puma-haikou.dts over as well, drop the separate DDR-option devicetrees and instead replace them with a puma Kconfig option to select and include the needed DDR variant. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07rockchip: puma: fix indentation of misc_init_rHeiko Stuebner1-16/+16
The commit moving puma to the generic cpuid/macaddr helpers used 7 spaces as indentation, so correct that by moving to the required tabs. Fixes: fa177ff0208b ("board: puma: Use rockchip_* helpers to setup cpuid and macaddr") Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07rockchip: rk3328: add rock-pi-e-rk3328_defconfig fileb.l.huang1-0/+7
This commit add the default configuration file and relevant description for rock-pi-e board Signed-off-by: Banglang Huang <banglang.huang@foxmail.com>
2020-06-04pfla02: Rework excluding NAND from SPLTom Rini1-4/+4
Rather than only enable CONFIG_CMD_NAND for non-SPL builds, move the CMD options to defconfig and rework the guards to not try and call the function in SPL builds. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefano Babic <sbabic@denx.de>
2020-06-04Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini4-75/+155
- Fixes 7e249bc13aaf: ("riscv: Move all SMP related SBI calls to SBI_v01") Move sbi_probe_extension() out of CONFIG_SBI_V01. - SiFive FU540 support SPL.
2020-06-04Merge tag 'u-boot-atmel-fixes-2020.07-a' of ↵Tom Rini3-0/+6
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel First set of u-boot-atmel fixes for 2020.07 cycle This set includes just two small commits that fix a build warning and add a missing serial node.
2020-06-04sifive: fu540: Add sample SD gpt partition layoutJagan Teki1-0/+2
This is a sample GPT partition layout for SD card, right now three important partitions are added to make the system bootable. partition layout: Part Start LBA End LBA Name Attributes Type GUID Partition GUID 1 0x00000022 0x00000821 "loader1" attrs: 0x0000000000000000 type: 5b193300-fc78-40cd-8002-e86c45580b47 guid: cbcbef44-e627-42bc-b134-93b6f3784b8c 2 0x00000822 0x00002821 "loader2" attrs: 0x0000000000000000 type: 2e54b353-1271-4842-806f-e436d6af6985 guid: f54eba28-d8de-4852-978d-1a673777e2ae 3 0x00002822 0x00020821 "rootfs" attrs: 0x0000000000000004 type: 0fc63daf-8483-4772-8e79-3d69d8477de4 type: linux guid: 9561df46-8d55-4799-a83b-cfee9ef6ff93 Note: - loader1 would be fsbl or spl - loader2 would be U-Boot or U-Boot proper Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-06-04riscv: sifive: fu540: add SPL configurationPragnesh Patel4-1/+108
Add a support for SPL which will boot from L2 LIM (0x0800_0000) and then SPL will boot U-Boot FIT image (OpenSBI FW_DYNAMIC + u-boot.bin) from MMC boot devices. SPL related code is leveraged from FSBL (https://github.com/sifive/freedom-u540-c000-bootloader.git) Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-04riscv: cpu: fu540: Add support for cpu fu540Pragnesh Patel1-1/+1
Add SiFive fu540 cpu to support RISC-V arch Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-04sifive: fu540: add ddr driverPragnesh Patel1-0/+2
Add driver for fu540 to support ddr initialization in SPL. This driver is based on FSBL (https://github.com/sifive/freedom-u540-c000-bootloader.git) Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-04riscv: sifive: fu540: Use OTP DM driver for serial environment variablePragnesh Patel2-73/+42
Use the OTP DM driver to set the serial environment variable. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-03board/freescale: add the DM_ETH changes for the PPC DPAA platformsMadalin Bucur13-1/+28
Add the required changes for compiling with DM_ETH on the PPC DPAA platforms. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-02fu540: Remove ARCH= references from documentationTom Rini1-0/+1
When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. While in here, add the doc file to the MAINTAINERS entry. Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Anup Patel <anup.patel@wdc.com> Cc: Atish Patra <atish.patra@wdc.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-02arm: ti: Remove ARCH= references from documentationTom Rini3-9/+9
When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-02rockchip: Remove ARCH= references from documentationTom Rini4-5/+2
When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. Acked-by: Kever Yang <kever.yang@rock-chips.com> Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Klaus Goger <klaus.goger@theobroma-systems.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-02powerpc: Remove ARCH= references from documentationTom Rini3-3/+0
When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. Cc: Po Liu <po.liu@nxp.com> Cc: Qiang Zhao <qiang.zhao@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-02imx: Remove ARCH= references from documentationTom Rini3-3/+3
When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. Cc: Adam Ford <aford173@gmail.com> Cc: Vanessa Maegima <vanessa.maegima@nxp.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-02amlogic: Remove ARCH= references from documentationTom Rini18-18/+0
When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. Cc: Beniamino Galvani <b.galvani@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Cc: u-boot-amlogic@groups.io Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-02x86: minnowmax: Add support for Winbond flashSimon Glass1-0/+3
This allows the use of the Dediprog em100pro so I can test SPI flash on this board in my lab. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-31Merge tag 'u-boot-rockchip-20200531' of ↵Tom Rini5-2/+101
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix mmc of path after syncfrom kernel dts; - Add dwc3 host support with DM for rk3399; - Add usb2phy and typec phy for rockchip platform; - Migrate board list doc to rockchip.rst; - Add rk3399 Pinebook Pro board support; - Update dram_init in board_init and add memory node in SPL;
2020-05-31rockchip: Add initial support for the Pinebook Pro laptop from Pine64.Peter Robinson4-0/+99
Specification: - Rockchip RK3399 - 4GB Dual-Channel LPDDR4 - eMMC socket - mSD card slot - 128Mbit (16Mb) SPI Flash - AP6256 for 11AC WiFi + BT5 - 14 inch 1920*1080 eDP MiPi display - Camera - USB 3.0, 2.0 ports - Type-C port with alt-mode display (DP 1.2) and 15W charge - DC 5V/3A - optional PCIe slot for NVMe SSD drive Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Tested-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-29sh: r2dplus: Enable board_eth_init only for non-DM caseMarek Vasut1-0/+2
The board_eth_init() is not used for DM case, enable it only for the non-DM case. This function should eventually be removed. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-05-29rockchip: Fix spl mmc boot device ofpathJagan Teki1-2/+2
Linux v5.7-rc1 dts(i) sync has changed the sdmmc node from dwmmc@fe320000 to mmc@fe320000 and this ofpath is being used in rockchip spl bootdevice code. So, update the ofpath with a new node name and prefix "same-as-spl" to missing u-boot,spl-boot-order. Bug log: U-Boot SPL 2020.07-rc2-00256-g9c5fef5774 (May 24 2020 - 20:20:43 +0530) Trying to boot from MMC2 mmc_load_image_raw_sector: mmc block read error Trying to boot from MMC1 mmc_load_image_raw_sector: mmc block read error SPL: failed to boot from all boot devices Fixes: 167efc2c7a46 ("arm64: dts: rk3399: Sync v5.7-rc1 from Linux" Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-27arm: mvebu: Convert CRS305-1G-4S board to CRS3xx-98DX3236Luka Kovacic8-15/+19
Convert the CRS305-1G-4S board to CRS3xx-98DX3236 to enable easier implementation of new CRS3xx series boards, based on Marvell Prestera 98DX3236. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Jakov Petrina <jakov.petrina@sartura.hr>
2020-05-26sifive: fix palmer's email addressPragnesh Patel1-1/+1
Fix Palmer's email address Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-05-25Merge tag 'ti-v2020.07-rc3' of ↵Tom Rini3-19/+20
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Enable DM_ETH on omap3_logic board - Enable Caches in SPL for K3 platforms - Enable backup boot mode support for J721E - Update the DDR timings for AM654 EVM - Add automated tests for RX-51
2020-05-22rockchip: veyron: move board_early_init_f to _r (after reloc)Urja Rannikko1-1/+1
Previously veyron_init() was called in board_init() context, which is called after relocation. Moving it to veyron.c used board_early_init_f which is called way earlier, and causes veyron_init to hang. Using board_early_init_r instead fixes this. Fixes: b678f2790c ("rockchip: rk3288: Move veyron_init() back to veyron.c") Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22rockchip: Enable PCIe/M.2 on rock960 boardJagan Teki1-0/+24
Due to board limitation some SSD's would work on rock960 PCIe M.2 only with 1.8V IO domain. So, this patch enables grf io_sel explicitly to make PCIe/M.2 to work. Cc: Tom Cubie <tom@radxa.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22board: puma: use dtb given on the commandline instead of using u-boot.dtbHeiko Stuebner1-1/+1
The make_fit_spl scripts get the dtb to use as commandline option, so use it for puma as well. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
2020-05-21Merge git://git.denx.de/u-boot-shTom Rini1-18/+10
- Enable -ffunction-sections / -fdata-sections --gc-sections to SH - RCar Gen3 updates
2020-05-20Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini5-3/+326
- Add DM_ETH support for lx2160aqds, ls2080aqds, ls1088aqds - QSI related fixes on ls1012a, ls2080a, ls1046a, ls1088a, ls1043a based platforms - Bug-fixes/updtaes related to ls1046afrwy, fsl-mc, msi-map property
2020-05-20ARM: rmobile: Merge prior-stage firmware DT fragment into U-Boot DT on Gen3Marek Vasut1-18/+10
The prior-stage firmware generates DT fragment containing the /firmware node, /reserved-memory node and /memory@ nodes. Merge these nodes into the U-Boot DT, so U-Boot can use this information. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2020-05-19mpc83xx, abb: remove suvd3 boardHeiko Schocher3-53/+0
the mpc83xxx suvd3 variant is not longer used, so remove it. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19arm: mach-k3: Enable dcache in SPLJan Kiszka1-0/+2
Add support for enabling dcache already in SPL. It accelerates the boot and resolves the risk to run into unaligned 64-bit accesses. Based on original patch by Lokesh Vulta. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-05-19Nokia RX-51: Add automated test for running RX-51 build in qemuPali Rohár1-0/+1
This patch contains test/nokia_rx51_test.sh script which automatically download and compile all needed tools in local temporary directory to generate a simple MTD images for booting Maemo kernel image by U-Boot from RAM, eMMC and OneNAND. MTD images are then run in virtual n900 machine provided by qemu-linaro project. This script does not need any special privileges, so it can be run as non-root nobody user. It can be used to check that U-Boot for Nokia N900 is not broken and can be successfully booted in emulator. Script is registered to .azure-pipelines.yml, .gitlab-ci.yml and .travis.yml so it would be automatically run on those CI services. Signed-off-by: Pali Rohár <pali@kernel.org>
2020-05-19ARM: omap3_logic boards: Convert to DM_ETHAdam Ford1-19/+17
With the converstion of SMC911x to DM, this can facilitate the omap3 boards from LogicPD (now called Beacon EmbeddedWorks) to be converted. There isn't a clean solution to doing this in phases, so the boards are all being done together to avoid breaking functionality. Because the GPMC bus hasn't been converted, the -u-boot.dtsi node needs to show the address of the ethernet controller for each board. The board file, which is common betwen the OMAP35 and DM37 SOM LV and Torpedo boards, can remove the manual ethernet initialization, but it still needs to register the address and GPMC configuration for the Ethernet controller which is now being moved around to board_late_init(). Lastly, this patch updates the various config files to add the reference for DM_ETH and remove the SMC address, which is now fetched from the newly created device tree nodes. Signed-off-by: Adam Ford <aford173@gmail.com>
2020-05-19arm: dts: ls2080aqds: add CONFIG_MULTI_DTB_FIT supportIoana Ciornei1-0/+97
Add support for selecting the appropriate DTS file depending on the SERDES protocol used. The fsl-ls2080a-qds DTS will be used by default if there isn't a DTS file specifically made for the current SERDES protocol. This patch adds the necessary DPMAC nodes (DPMAC 1-8) for protocol 42 (0x2A) on SD#1. Also, in case CONFIG_DM_ETH and CONFIG_MULTI_DTB_FIT are enabled implement the board_fit_config_name_match() function in order to choose the appropriate DTS. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19board: ls2080aqds: transition to DM_ETHIoana Ciornei2-3/+16
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2 Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH is activated. Also, force the PCI devices to be enumerated at probe time. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19board: ls1088aqds: transition to DM_ETHIoana Ciornei1-0/+2
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2 Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH is activated. Also, force the PCI devices to be enumerated at probe time. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19arm: dts: ls1088aqds: add CONFIG_MULTI_DTB_FIT supportIoana Ciornei1-0/+87
Add support for selecting the appropriate DTS file depending on the SERDES protocol used. The fsl-ls2088a-qds DTS will be used by default if there isn't a DTS file specifically made for the current SERDES protocol. This patch adds support for the on-board ports (DPMAC 1,2 and 4,5) found on the SERDES protocols 21(0x15) and 29(0x1d) for SD#1. On the LS1088AQDS board EMDIO1 is used with two onboard RGMII PHYs (Realtek RTL8211FD-CG), as well as 2 input/output connectors for mezzanine cards. Configuration signals from the Qixis FPGA control the routing of the external MDIOs. Register 0x54 of the Qixis FPGA controls the routing of the EMDIO1 one of the 2 IO slots. As a consequence, a new node is added to describe register 0x54 as a MDIO mux controlled with child nodes describing all the IO slots as MDIO buses. Also, in case CONFIG_DM_ETH and CONFIG_MULTI_DTB_FIT are enabled implement the board_fit_config_name_match() function in order to choose the appropriate DTS. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19board: lx2160aqds: implement board_fit_config_name_matchIoana Ciornei1-0/+109
In case CONFIG_DM_ETH and CONFIG_MULTI_DTB_FIT are enabled implement the board_fit_config_name_match() function in order to choose the appropriate DTS for the current SERDES protocol configuration. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Razvan Ionut Cirjan <razvanionut.cirjan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19board: lx2160aqds: transition to DM_ETHIoana Ciornei2-1/+16
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2 Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH is activated. Also, force the PCI devices to be enumerated at probe time. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Razvan Ionut Cirjan <razvanionut.cirjan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass77-0/+78
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass257-2/+260
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18Fix some checkpatch warnings in calls to udelay()Simon Glass1-4/+4
Fix up some incorrect code style in calls to functions in the linux/time.h header, mostly udelay(). Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/stringify.h from common headerSimon Glass3-0/+3
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-09-16 03:00:51 +0000