aboutsummaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)AuthorFilesLines
2020-12-09Merge tag 'u-boot-stm32-20201209' of ↵WIP/09Dec2020Tom Rini6-5/+16
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Manage CONFIG_ENV_EXT4_DEVICE_AND_PART in stm32mp1 board - Update ARM STI and ARM STM STM32MP Arch maintainers emails - Enable internal pull-ups for SDMMC1 on DHCOM SoM
2020-12-09treewide: Update email address Patrick Delaunay and Patrice ChotardPatrice Chotard5-5/+5
Update Patrick and my email address with the one dedicated to upstream activities. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-12-09add check for ignored CONFIG_ENV_EXT4_DEVICE_AND_PART definitionManuel Reis1-0/+11
Check whether user has explicitly defined device and partition where environment file will be located before using 'auto' i.e. bootable partition Voids the need to set such partition as bootable to work with the 'dev:auto' tuple Signed-off-by: Manuel Reis <mluis.reis@gmail.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Tested-by: Michael Opdenacker <michael.opdenacker@bootlin.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2020-12-08Merge https://gitlab.denx.de/u-boot/custodians/u-boot-imxWIP/08Dec2020Tom Rini19-413/+511
2020-12-07Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellWIP/07Dec2020Tom Rini2-1/+6
- Espressobin: Simplify DT handling of board variants (Pali) - Add Luka Perkov to maintainers of Puzzle-M801 (Luka) - Armada 38x: Enable board specific USB2 high-speed impedance threshold configuration (Joshua)
2020-12-07doc: board: imx8qm-rom7720-a1.rst: convert readme to reSTOliver Graute1-61/+0
Convert README to reStructuredText format. Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2020-12-07arm: mvebu: Espressobin: Detect presence of emmc at runtimePali Rohár1-1/+5
Try to initialize emmc in board_late_init() and if it fails then we know that emmc device is not connected. This allows to use in U-Boot just one DTS file for all Espressobin variants and also to correctly set fdtfile env variable for Linux kernel. Signed-off-by: Pali Rohár <pali@kernel.org> Tested-by: Gérald Kerma <gerald@gk2.net> Reviewed-by: Andre Heider <a.heider@gmail.com>
2020-12-07arm: mvebu: puzzle-m801: Add a maintainerLuka Kovacic1-0/+1
Add Luka Perkov to Puzzle-M801 BOARD MAINTAINERS. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-12-06colibri-imx8x: add implementation for board_mem_get_layoutIgor Opaniuk1-0/+23
Add implementation of board_mem_get_layout for overriding the memory layout. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-12-06apalis-imx8x: add implementation for board_mem_get_layoutIgor Opaniuk1-0/+23
Add implementation of board_mem_get_layout for overriding the memory layout. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-12-06apalis-imx8: add implementation for board_mem_get_layoutIgor Opaniuk1-0/+23
Add implementation of board_mem_get_layout for overriding the memory layout. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06board: toradex: add apalis-imx8x 2gb wb it v1.1a module supportIgor Opaniuk5-0/+201
This commit adds initial support for the Toradex Apalis iMX8X 2GB WB IT V1.1A System on Module support [1]. Boot log: U-Boot 2020.10-02940-g894aebb7e8-dirty (Oct 22 2020 - 09:43:57 +0300) CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial@5a070000 Out: serial@5a070000 Err: serial@5a070000 Model: Toradex Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT V1.1A, Serial# 06617018 Net: eth0: ethernet@5b040000 [PRIME] Hit any key to stop autoboot: 0 Functionality wise the following is known to be working: - eMMC and MMC/SD card - Ethernet (*) - GPIOs - I2C Unfortunately, there is no USB functionality for the i.MX 8QXP as of yet. * With the SCU FW from the latest Toradex BSP 5.0.0 (SCU FW 1.5.1) ETH PHY encounters bring up problems after reset, this will be fixed soon on SCU FW side. [1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8x Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06verdin-imx8mm: automatic ram size detectionMarcel Ziswiler1-0/+10
Implement board_phys_sdram_size() to automatically detect Verdin iMX8M Mini DualLite 1GB vs. Verdin iMX8M Mini Quad 2GB. Note: This only works if we keep using similar RAM chips! Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06toradex: tdx-cfg-clock: fix i.mx 8m mini interactiveMarcel Ziswiler1-17/+9
Now with them first Verdin iMX8M Mini DualLite modules in for bring-up we got clarity how is_cpu_type() actually behaves. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06verdin-imx8mm: spl: enable pca9450 i2c level translatorMax Krummenacher1-0/+2
Enable PCA9450 i2c level translator, as this is used for the on module ADC. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06verdin-imx8mm: implement hardware version detectionMax Krummenacher1-0/+71
And select the correct devicetree accordingly by setting the variant environment variable. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-12-06verdin-imx8mm: spl: switch to pca9450 pmicMax Krummenacher1-22/+20
V1.1A HW switched the PMIC from BD71837 to PCA9450. - Disable combined DVS in PCA9450_BUCK123_DVS. - Increase DDR Voltage to 0.95V as we use a 1.5GHz RAM. - Configure WDOG_B behaviour. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06toradex: tdx-cfg-clock: add new i.mx 8m mini/plus skusMarcel Ziswiler2-14/+36
Add new i.MX 8M Mini/Plus SKUs to ConfigBlock handling: 0058: Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT 0059: Verdin iMX8M Mini Quad 2GB IT 0060: Verdin iMX8M Mini DualLite 1GB WB IT 0061: Verdin iMX8M Plus Quad 2GB Rename existing SKU (use correct one): Verdin iMX8M Nano SoloLite 1GB -> Verdin iMX8M Nano Quad 1GB Wi-Fi Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-12-06imx: imx8qm_rom7720_a1: add missing DTS to the MAINTAINERSOliver Graute1-0/+1
add the dts file to the MAINTAINERS entry Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: uboot-imx <uboot-imx@nxp.com>
2020-12-06board: ge: bx50v3: check b850v3 power management watchdogIan Ray1-0/+17
Set `bootcause' from b850v3 power management watchdog status. Boot cause "REVERT" is no longer used, remove it. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06board: ge: bx50v3: reduce magic numbersSebastian Reichel1-21/+7
Use VPD product ID instead of confidx, so that we can easily reuse the product ID defines and avoid some magic numbers. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06board: ge: bx50v3: drop unused pinmux definesSebastian Reichel1-15/+0
Remove pinmux defines, that are no longer used after converting the code to devicetree. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06board: ge: common: vpd: fix nameSebastian Reichel1-1/+1
Commit f692b479f02d changed the VPD partition name from "vpd" to "vpd@0". Fix the VPD reader code to use the new name, so that the VPD code keeps working. Fixes: f692b479f02d ("i2c: eeprom: Use reg property instead of offset and size") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06imx: aristainetos: enable U-Boot Environment variables protectionHeiko Schocher1-0/+20
enable Environment protection with: CONFIG_ENV_APPEND=y CONFIG_ENV_WRITEABLE_LIST=y CONFIG_ENV_ACCESS_IGNORE_FORCE and add board specific env_get_location() function. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-12-06imx6: add support for aristainetos2c_cslb board variantHeiko Schocher3-0/+18
add support for aristainetos2c_cslb board variant. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-12-06imx6: remove not longer supported aristainetos boardsHeiko Schocher4-283/+50
Removed aristainetos2, 2b, 2b-csl. This boards have been recalled and destroyed. Adapt board code to remove stuff not needed anymore. Fix checkpatch warning, remove fdt_high and initrd_high from default environment. Signed-off-by: Heiko Schocher <hs@denx.de> zu remove
2020-12-04colibri_t30: disable rs232 serial transceiver forceoff pinsMarcel Ziswiler1-0/+11
Use gpio_early_init_uart() function to disable RS232 serial transceiver ForceOFF# pins on Iris. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-12-04apalis/colibri_t30: avoid uart input from floating pinsMarcel Ziswiler2-6/+10
Avoid UART input from floating RX pins on UARTB and UARTC (Colibri T30) and UARTB, UARTC and UARTD (Apalis T30). Note: Floating pins may cause spurious break conditions potentially interrupting U-Boot's autoboot. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-12-04colibri_t30: fix spi1 and uart2/3 resp. uartb/c pinmuxingMarcel Ziswiler1-11/+12
Fix SPI1 and UART2/3 resp. UARTB/C pinmuxing. Note: The former was illegally muxing multiple SoC balls onto the same internal SoC signal which caused rather strange behaviour regarding the RS232 serial transceiver ForceOFF# pins as available on Iris. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-12-04apalis/colibri_t30: add comment about tristate and input vs. output pinmuxingMarcel Ziswiler2-0/+4
Add pinmuxing comment stating that TRISTATE means the output driver is tri-stated and INPUT means the input driver is enabled vs. OUTPUT where it is disabled. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-11-28riscv: sifive/fu540: kconfig: Enable support for Opencores I2C controllerPragnesh Patel1-0/+1
Enable support for SiFive FU540 Opencores I2C master controller. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-11-25board: st: stm32mp1: update load address for FIT examplesPatrick Delaunay2-5/+19
Update kernel load address for FIT examples to avoid relocation: - Kernel example uses Image.gz with U-Boot gzip decompression at final kernel location 0x0xC0008000. - Copro example loads zImage at a correct location (0xC4000000), to avoid zImage relocation before decompression by kernel code. An other solution to avoid zImage relocation is to align the kernel load and entry address with the real location in FIT (the relocation of zImage is skipped in U-Boot bootm command for identical address) but it is less flexible because this offset depends on FIT content: For example: ## Loading kernel from FIT Image at c2000000 ... Using 'ev1' configuration Trying 'kernel' kernel subimage Description: Linux kernel Created: 2020-10-22 9:08:32 UTC Type: Kernel Image Compression: uncompressed Data Start: 0xc20000cc The kernel offset in FIT is 0xCC in FIT and zImage is decompressed at 0xC0008000 by kernel code: kernel { description = "Linux kernel"; data = /incbin/("zImage"); type = "kernel"; arch = "arm"; os = "linux"; compression = "none"; load = <0xC20000cc>; entry = <0xC20000cc>; hash-1 { algo = "sha1"; }; }; Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-25board: stm32mp1: no MTD partitions fixup for serial bootPatrick Delaunay1-3/+8
Remove the update of the MTD partitions in kernel device tree for serial boot (USB / UART), and the kernel will use the MTD partitions define in the loaded DTB because U-Boot can't known the expected flash layout in this case. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-25ARM: dts: stm32: Add DHCOM based PicoITX boardMarek Vasut1-0/+22
Add DT for DH PicoITX unit, which is a bare-bones carrier board for the DHCOM. The board has ethernet port, USB, CAN, LEDs and a custom board-to-board expansion connector. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-20fru: common: Record pcie/uuid fields in custom board areaMichal Simek1-0/+4
Add additional fields. They will be just recorded and filled but not shown. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20fru: ops: Do not let parser to write data to not allocated spaceMichal Simek1-1/+7
If customs fields in board area are used it will likely go over allocated space in struct fru_board_data. That's why calculate limit of this structure to make sure that different data is not rewritten by accident. When limit is reached stop to record fields. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20fru: common: Switch capture variable with the restMichal Simek2-2/+2
capture variable is bool which is just one byte and it is just causing unaligned accesses. Better to have it as last entry in the structure. It also simplify offset calculation for initial header copy. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20microblaze: Get rid of xparameters.hMichal Simek1-18/+0
There is no need to use this file anymore. Include it in main config file and simplify logic based on it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-19km/ppc: use Kconfig for MEMTEST configurationHolger Brunck2-6/+8
Also change back SYS_MEMTEST_END to 0x00f00000. 0xe00000 was wrong and introduced due to the global Kconfig migration of this option in u-boot. CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
2020-11-19km: replace hardcoded address for imported environmentMatteo Ghidoni8-8/+8
Instead of using an hard coded address, make use of an already defined address for importing the environment for ramfs and nfs boot. This allows boards having different mapping to use the same code. CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: Matteo Ghidoni <matteo.ghidoni@hitachi-powergrids.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
2020-11-19arm: vexpress: don't reset flags in board_init to avoid losing previous onesArnaud Aujon Chevallier1-1/+0
Re-submitted because of missing description and signed-off. flags reset in board_init caused bugs when executing command like editenv because the reallocated flag was lost. Tested-by: Michael Opdenacker <michael.opdenacker@bootlin.com> Signed-off-by: Arnaud Aujon Chevallier <arnaud@intelibre.fr>
2020-11-17Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvWIP/17Nov2020Tom Rini1-19/+26
- Enable SATA disk on QEMU RISC-V and update doc. - k210 pinctrl updates: - Fix inverted IE and OE for I2C. - Rename power domains to match datasheet.
2020-11-17riscv: enable SATA disk on QEMU RISC-VHeinrich Schuchardt1-0/+7
Allow attaching a virtual SATA disk to QEMU RISC-V by implying AHCI, AHCI_PCI, CMD_SCSI, DM_SCSI, PCI_INIT_R, SCSI, SCSI_AHCI. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-11-17riscv: sort SPECIFIC_OPTIONSHeinrich Schuchardt1-19/+19
Sort implied options in BOARD_SPECIFIC_OPTIONS in the same sequence as in .config. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-11-17sunxi: allow to use AXP20[39] attached to I2C0 on V3 seriesIcenowy Zheng1-0/+4
The reference design of Allwinner V3 series uses an AXP203 or AXP209 PMIC attached to the I2C0 bus of the SoC, although the first community-available V3s board, Lichee Pi Zero, omitted it. Allow to introduce support for the PMIC on boards with it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-17sunxi: a64: Add a defconfig for the PinePhoneSamuel Holland1-0/+5
The PinePhone is a smartphone produced by Pine64, with an A64 SoC, 2 or 3 GiB LPDDR3 RAM, 16 or 32 GiB eMMC, 720x1440 MIPI-DSI panel, and Quectel EG25-G modem. There are two main board revisions: 1.1 for early adopters, and 1.2 for mass production. Since there is code to detect the board revision at boot, one config/image can support both boards. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-11-17sunxi: board: Set fdtfile to match the DT chosen by SPLSamuel Holland1-2/+11
Previously, fdtfile was always the value in CONFIG_DEFAULT_DEVICE_TREE. This meant that, regardless of the DT chosen by SPL (either by changing the header in the image or by the selection code at runtime), Linux always used the default DT. By using the name from the SPL header (which, because of the previous commit, always matches the DT used by U-Boot proper), Linux also sees the same board as U-Boot/SPL, even if the boot script later loads a DT from disk. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [Andre: remove no longer needed CONFIG_SPL_LOAD_FIT guards] Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-11-17sunxi: board: Save the chosen DT name in the SPL headerSamuel Holland1-1/+27
This overwrites the name loaded from the SPL image. It will be different if there was previously no name provided, or if a more accurate name was determined by the board variant selection logic. This means that the DT name in the SPL header now always matches the DT appended to U-Boot. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [Andre: move function under CONFIG_SPL_LOAD_FIT guard] Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-11-17sunxi: board: Add PinePhone DT selection logicSamuel Holland1-0/+21
There are two different publicly-released revisions of the PinePhone hardware, versions 1.1 and 1.2; and they need different device trees. Since some GPIO pins were rerouted, we can use that to distinguish between them. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-17sunxi: board: Simplify Pine A64 DT selection logicSamuel Holland1-8/+4
Instead of using an entirely separate matching algorithm, simply update the name of the DT we want to match. Enabling this logic does not depend on the FIT config name, only on the initial guess of the board name. Importantly, the initial guess must be "sun50i-a64-pine64-plus", because otherwise the logic would trigger when "sun50i-a64-pine64-lts" was written to the SPL header. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
generated by cgit v1.1 at 2024-10-17 17:11:56 +0000