aboutsummaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)AuthorFilesLines
2021-06-19Merge tag 'u-boot-rockchip-20210618' of ↵WIP/19Jun2021-nextTom Rini4-0/+32
https://source.denx.de/u-boot/custodians/u-boot-rockchip into next - New SoC platform support: rk3568; - rockchip pcie Code compile issue fix; - Board fix for rk3399 Khadas Edge; - Add Rockchip NFC driver;
2021-06-18board: stm32mp1: correct the property name for ethPatrick Delaunay2-4/+4
Use the correct name for STMicroelectronics phys config properties, replace '_' by '-': "st,eth_clk_sel" => "st,eth-clk-sel" "st,eth-ref-clk-sel" => st,eth-clk-sel" These property name are aligned with the upstreamed Linux kernel binding: linux/Documentation/devicetree/bindings/net/stm32-dwmac.yaml See Linux kernel commit "dt-bindings: net: stmmac: add phys config properties" merged in v5.1-rc1. This patch allow to reuse the kernel device tree directly in U-Boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18board: rockchip: Add rk3568 evb supportJoseph Chen4-0/+32
Add support for rk3568 evaluation board. Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-17Merge tag 'u-boot-atmel-2021.10-a' of ↵WIP/17Jun2021-nextTom Rini3-116/+12
https://source.denx.de/u-boot/custodians/u-boot-atmel into next First set of u-boot-atmel features for the 2021.10 cycle: This feature set converts the boards pm9261 and pm9263 Ethernet support to DM; enables hash command for all SAM boards; fixes the NAND pmecc bit-flips correction; adds Falcon boot for sama5d3_xplained board; and other minor adjustments.
2021-06-17k210: Don't imply CCFSean Anderson1-2/+0
Now that the k210 clock driver does not depend on CCF, we should no longer imply it (and probably should not have in the first place). We can also reduce the pre-relocation malloc arena back to something sensible. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-06-14board: sama5d3_xplained: add Falcon boot supportMichael Opdenacker1-0/+7
This supports Falcon boot support for Microchip SAMA5D3 Xplained, tested on raw MMC, and on raw NAND. spl_start_uboot() is has the simplest possible implementation. It doesn't test the environment because enabling environment support currently causes the SPL to exceed its maximum size (64 KiB). It doesn't check the serial for incoming characters either because this functionality currently doesn't seem to work from the SPL on this board. Settings for Falcon boot from at FAT partition are also added to avoid compile failures when CONFIG_SPL_OS_BOOT is enabled, but this particular case is currently not functional as adding FAT and partition support cause the SPL to be too big again. Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
2021-06-11board: ti: j72xx: README: update build instructions and image formatsTero Kristo1-3/+6
Update build instructions and image formats based on HSM rearch. A new DM image is added into the build, which gets executed right after R5 SPL finishes its job. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tero Kristo <kristo@kernel.org>
2021-06-11common: fit: Update board_fit_image_post_process() to pass fit and node_offsetLokesh Vutla4-4/+8
board_fit_image_post_process() passes only start and size of the image, but type of the image is not passed. So pass fit and node_offset, to derive information about image to be processed. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Tero Kristo <kristo@kernel.org>
2021-06-09Nokia RX-51: Enable CONFIG_WDT to remove deprecation warningPali Rohár1-4/+33
Also convert CONFIG_HW_WATCHDOG to CONFIG_WATCHDOG. Signed-off-by: Pali Roh?r <pali@kernel.org> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210309201915.16586-1-pali@kernel.org
2021-06-09board: ti: am64x: Set the core voltage of USB PHY to 0.85VAswath Govindraju1-0/+14
Set the core voltage of USB PHY in AM64x to 0.85V in spl_board_init(). Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210604163043.12811-5-a-govindraju@ti.com
2021-06-05brxre1: disable video after DM_VIDEO conversion deadlineAnatolij Gustschin1-0/+9
The board was not converted to DM_VIDEO before deadline, so disable video support for now. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2021-06-04arm: mvebu: turris_omnia: support invoking rescue boot from consoleMarek Behún1-24/+29
Make it possible to invoke rescue boot from U-Boot console, without having to press the factory reset button. This is needed when accessing the device remotely, for example. Achieve this by putting rescue command into `bootcmd_rescue` default environment variable and setting some distroboot environment variables to their default values when the factory button is pressed. Rescue boot from console can be invoked by running run bootcmd_rescue Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-04arm: mvebu: turris_omnia: update rescue mode boot commandMarek Behún1-2/+7
Update rescue mode boot command on Turris Omnia. We are compressing the image with lzma now. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-05-31board: sifive: add HiFive Unmatched board supportGreen Wan6-0/+179
Add defconfig and board support for HiFive Unmatched. Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-05-28ARM: stm32: Add additional ID register check for KSZ8851 presenceMarek Vasut1-1/+10
Currently the code sets eth1addr only if /ethernet1 alias exists in DT, the node pointed to by the alias has "micrel,ks8851-mll" compatible string, and the KSZ8851 CCR register read indicates programmed EEPROM is not connected. This is not sufficient to detect cases where the DT still contains the KSZ8851 nodes, but the chip itself is not present. Extend the detection to handle these cases. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-05-28ARM: stm32: Update dhelectronics/dh_stm32mp1/MAINTAINERS fileChristoph Niedermaier1-0/+1
Adding new DH electronics mailing list. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-05-25MIPS: remove deprecated qemu_mips boardDaniel Schwierzeck5-172/+0
Remove qemu_mips boards because DM migration doesn't make sense. The board support for qemu_mips is already marked as deprecated in Qemu in favour of the Malta board. Also qemu_mips support has been removed from Linux a long time ago. The official replacement is the Malta board. The same Malta U-Boot image can be used with Qemu and on physical hardware. All combinations of Big Endian and Little Endian as well as 32 bit and 64 bit are supported. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-05-24ARM: fix LTO for rockchip and samsungMarek Behún1-1/+1
When building with LTO, the compiler complains about type mismatch of function usb_gadget_handle_interrupts(). This function is defined without parameters in files arch/arm/mach-rockchip/board.c board/samsung/common/exynos5-dt.c but it should have one parameter, int index. Fix this. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-05-24treewide: Convert macro and uses of __section(foo) to __section("foo")Marek Behún7-7/+7
This commit does the same thing as Linux commit 33def8498fdd. Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-19riscv: ae350: Switch to use binman to generate u-boot.itbBin Meng1-0/+1
Use the new BINMAN_STANDALONE_FDT option for AE350 based SPL defconfigs, so that binman is now used to generate u-boot.itb. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Rick Chen <rick@andestech.com>
2021-05-19riscv: sifive: unleashed: Switch to use binman to generate u-boot.itbBin Meng1-0/+1
At present SiFive Unleashed board uses the Makefile to create the FIT, using USE_SPL_FIT_GENERATOR, which is deprecated as per the Makefile warning. Update to use binman instead. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-18efi_loader: capsule: Remove the check for capsule_authentication_enabled ↵Sughosh Ganu1-6/+0
environment variable The current capsule authentication code checks if the environment variable capsule_authentication_enabled is set, for authenticating the capsule. This is in addition to the check for the config symbol CONFIG_EFI_CAPSULE_AUTHENTICATE. Remove the check for the environment variable. The capsule will now be authenticated if the config symbol is set. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviwed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-05-16arm: octeontx2: Add Octeon TX2 CN913x DB supportKonstantin Porotchkin2-0/+25
This patch adds the base support for the Marvell Octeon TX2 CN913x DB. Only one defconfig is added with this patch. Other board variants are available (NAND, MMC booting) and images for these boards can be generated by following the documentation added in the included README. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-05-14Merge https://source.denx.de/u-boot/custodians/u-boot-shWIP/14May2021Tom Rini3-16/+81
2021-05-14riscv: k210: Rename airam to aisramSean Anderson1-1/+1
This is more consistent with the naming of other ram banks, and matches what Linux is doing. Reported-by: Damien Le Moal <Damien.LeMoal@wdc.com> Signed-off-by: Sean Anderson <seanga2@gmail.com>
2021-05-14riscv: Enable AI ram on K210Sean Anderson1-1/+11
We just need to initialize all the clocks pre-reloc. The clock driver creates a bunch of devices, so we need to increase the pre-reloc malloc arena. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2021-05-13am335x: add support for cape detect functionalityKory Maincent1-0/+1
Update the Kconfig and the board file to make the am335x board compatible with cape detection. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
2021-05-13arm: am335x: add support for i2c2 busKory Maincent3-0/+18
The am335x from BeagleBone use i2c EEPROM to detect capes. The memory is wired to i2c bus 2 therefore it need to be enabled. Add i2c2 clock, pinmux description and pinmux enable function. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
2021-05-13arm: sunxi: add support for DIP detection to CHIP boardKory Maincent2-0/+101
Add the extension_board_scan specific function to scan the information of the EEPROM on one-wire and fill the extension struct. Add the Kconfig symbol to enable the needs to detect DIPs. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Andre Przywara <andre.przywara@arm.com>
2021-05-13am57xx: add support for cape detect functionalityKory Maincent1-0/+1
This commit enables using the extension board detection mechanism on AM57xx based platforms. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
2021-05-13ti/common: add support for extension_scan_board functionKory Maincent4-0/+131
The BeagleBone platforms all use a common mechanism to discover and identify extension boards (called "capes"): each extension board has an I2C-connected EEPROM describing itself. This patch implements a generic extension_scan_board() feature that can be used by all BeagleBone platforms to read those I2C EEPROMs and fill in the list of "extension" structures. Following commits will enable this common logic on two BeagleBone platforms. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
2021-05-13pytest: add sandbox test for "extension" commandKory Maincent1-0/+23
This commit extends the sandbox to implement a dummy extension_board_scan() function and enables the extension command in the sandbox configuration. It then adds a test that checks the proper functionality of the extension command by applying two Device Tree overlays to the sandbox Device Tree. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> [trini: Limit to running on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-13board: pm9263: fix some typos in commentsIlko Iliev1-5/+5
Fix comment typos Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-13board: pm9263: switch to use DM_ETHIlko Iliev1-57/+0
Enable CONFIG_DM_ETH in configs/pm9263_defconfig Drop legacy initialization in board/ronetix/pm9263.c Remove network related setting from include/configs/pm9263.h Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-13board: pm9261: remove network supportIlko Iliev1-54/+0
The network support is removed because there is no DM for Davicom DM9000. Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-12ARM: renesas: Scrub duplicate memory nodes from DT on Gen3Marek Vasut1-0/+80
Scrub duplicate /memory@* node entries here. Some R-Car DTs might contain multiple /memory@* nodes, however fdt_fixup_memory_banks() either generates single /memory node or updates the first /memory node. Any remaining memory nodes are thus potential duplicates. However, it is not possible to delete all the memory nodes right away, since some of those might not be DRAM memory nodes, but some sort of other memory. Thus, delete only the memory nodes which are in the R-Car3 DBSC ranges. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-05-12ARM: rmobile: Add missing rcar-common/common.c to Beacon RZG2M kitMarek Vasut2-16/+1
The rcar-common/common.c contains various common board functions shared by all R-Car and RZG boards. This board is not compiling the file in, so add it. This way, part of the board code can be de-duplicated too. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Adam Ford <aford173@gmail.com>
2021-05-12Merge tag 'ti-v2021.07-rc3' of ↵WIP/12May2021Tom Rini5-2/+234
https://source.denx.de/u-boot/custodians/u-boot-ti - Initial support for AM64 EVM and SK - K3 DDR driver unification for J7 and AM64 platforms. - Minor fixes for TI clock driver
2021-05-12board: ti: am64x: Parse MAC address from board EEPROMVignesh Raghavendra1-0/+9
Parse MAC addresses from EEPROM and set them in the env. This is needed to get MAC address for additional ethernet ports on the EVM. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2021-05-12configs: am64x_evm_a53: Enable support for reading eepromLokesh Vutla1-0/+3
Enable relevant configs for reading eeprom data and updating env variables. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-12board: ti: am64x: Add support for detecting multiple device treesLokesh Vutla1-4/+9
Update the board_fit_config_name_match() to choose the right dtb. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-12board: ti: am64x: Enable support for reading EEPROM in R5 SPLLokesh Vutla1-0/+3
Include the relevant configs to enable support for reading EEPROM in R5SPL. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-12board: ti: am64x: Add support for reading eeprom dataLokesh Vutla1-0/+92
I2C EEPROM data contains the board name and its revision. Add support for: - Reading EEPROM data and store a copy at end of SRAM - Updating env variable with relevant board info - Printing board info during boot. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-12arm: mach-k3: am642: Add support for triggering ddr init from SPLDave Gerlach1-0/+3
In SPL, DDR should be made available by the end of board_init_f() so that apis in board_init_r() can use ddr. Adding support for triggering DDR initialization from board_init_f(). Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-05-12ram: k3-ddrss: Introduce top-level CONFIG_K3_DDRSSDave Gerlach1-2/+2
Create a new CONFIG_K3_DDRSS option to select the common parts of the k3-ddrss driver. Also introduce a choice that depends on the top level option to select CONFIG_K3_J721E_DDRSS for j721e support, and update corresponding Kconfig as required. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-05-12configs: am64x_evm_a53: Add Initial supportDave Gerlach1-0/+1
Add initial A53 defconfig support for AM64x SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-05-12configs: am64x_evm_r5: Add Initial supportDave Gerlach1-0/+7
Add initial R5 defconfig support for AM64x SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-05-12board: ti: am64x: Add board support for am64x evmDave Gerlach3-0/+109
Add board specific initialization for am64x based boards. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-05-11Merge tag 'u-boot-imx-20210502' of ↵WIP/11May2021Tom Rini36-9/+12529
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20210502 ------------------- - mx6: fixes for Ventana - local fixes from maintainer - imx7d: Ronetix's iMX7-CM - imx8: Ronetix iMX8MQ-CM Engicam i.Core MX8M Compulab iot-gate-imx8 - Fixes i.MX8 documentation - Fixes phy usage with fec
2021-05-11ppc: Remove some SECURE_BOOT defconfigsTom Rini2-9/+1
These specific configs are missing a number of migrations. In addition, they are blocking completion of the now-expired DM_MMC migration as it requires enabling BLK. Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Ruchika Gupta <ruchika.gupta@nxp.com> Cc: Sumit Garg <sumit.garg@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.1 at 2024-09-16 02:11:09 +0000