aboutsummaryrefslogtreecommitdiff
path: root/board/toradex
AgeCommit message (Collapse)AuthorFilesLines
2021-10-20colibri-imx6ull: add emmc variantMax Krummenacher3-4/+77
Add code to build the eMMC variant of the Colibri iMX6ULL, i.e. the 'Colibri iMX6ULL 1GB' which has a eMMC instead of the raw NAND used on other SKUs. Related-to: ELB-4056, ELB-4057 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-20colibri-imx6ull: imximage.cfg: integrate new 1GiB RAM variantPhilippe Schenker1-8/+5
Integrate new Toradex SKU 0062 Colibri iMX6ULL 1GB IT. This commit basically adjusts three parameters of the RAM settings: Increase density from 4Gb to 8Gb Increase ROW address from 15 to 16 Increase tRFC (refresh command time) from 260 to 350 This timing is valid for all Toradex Colibri iMX6ULL SKUs Related-to: ELB-4055, ELB-4057 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-20toradex: tdx-cfg-block: add new i.mx 6ull and 8m plus skusMarcel Ziswiler2-4/+30
Add new i.MX 6ULL and 8M Plus SKUs to ConfigBlock handling: 0062: Colibri iMX6ULL 1GB IT (eMMC) 0063: Verdin iMX8M Plus Quad 4GB IT 0064: Verdin iMX8M Plus Quad 2GB Wi-Fi / BT IT 0065: Verdin iMX8M Plus QuadLite 1GB IT 0066: Verdin iMX8M Plus Quad 8GB Wi-Fi / BT Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-20toradex: configblock: fix interactive mode it handlingDenys Drozdov1-1/+4
Restore "Is the module an IT version? [y/N]" for "cfgblock create" interactive mode command, which was leading to invalid detection of 0051 Colibri iMX8DX 1GB WB module; Fixes: a5b5ad4d859b ("toradex: tdx-cfg-clock: add new i.mx 8m mini/plus skus") Related-to: ELB-3482 Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-20toradex: take over maintainershipMarcel Ziswiler9-9/+9
Also take over maintainership of remaining Toradex SoMs as Oleksandr has left our company. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> CC: Oleksandr Suvorov <cryosay@gmail.com>
2021-10-20colibri-imx6ull: fix setup of nand gpmi clockPhilippe Schenker1-2/+3
NXP used to setup the gpmi clock root from gpmi_clk in early versions in their downstream BSP. [1] However on mainline the gpmi clock root was always setup from enfc since the beginning of the i.MX 6 series SoCs, which is still the same today. [2] NXP followed the mainline approach at some point and changed setup_gpmi_io_clk to setup gpmi clock root from enfc which left faulty code behind in our board file. [3] This commit follows the change of NXP as it improves the performance of the NAND from ~1.2 MiB/s to ~12 MiB/s. [3] This change was verified to work in recovery-mode and u-boot loaded from NAND on all four Colibri iMX6ULL SKUs from Toradex. The frequency used to read the NAND, measured on RE# (Read Enable): before this patch: 1.4 MHz after this patch: 22 MHz in Linux Kernel: 50 MHz [1] https://source.codeaurora.org/external/imx/uboot-imx/tree/arch/arm/cpu/armv7/mx6/clock.c?h=nxp/imx_v2016.03_4.1.15_2.0.0_ga#n62 [2] commit 23608e23fd65 ("i.mx: add the initial support for freescale i.MX6Q processor") [3] https://source.codeaurora.org/external/imx/uboot-imx/commit/?id=7a82a19ceabfb04bbc1591a67c99751748781c7d Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2021-10-20verdin-imx8mm: drop support for v1.0 hardwareMax Krummenacher1-8/+5
We drop support for Verdin iMX8M Mini V1.0B. Related-to: ELB-3551 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-10-20verdin-imx8mm: clean-up include orderMarcel Ziswiler1-2/+2
Alphabetically order includes. While at it also update copyright year resp. period. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-20verdin-imx8mm: switch to use binman to pack imagesMarcel Ziswiler1-9/+2
Use binman to pack images. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-10-20verdin-imx8mm: fix ethernetMarcel Ziswiler1-64/+0
Turns out Microship (formerly Micrel) meanwhile integrated proper support for the DLL setup on their KSZ9131. Unfortunately, this conflicts with our previous board code doing that. Fix this by getting rid of our board code and just relying on the generic implementation relying on rgmii-id being used as phy-mode. Fixes: commit c6df0e2ffdc4 ("net: phy: micrel: add support for DLL setup on ksz9131") Fixes: commit af2d3c91d877 ("ARM: dts: imx8mm-verdin: Set PHY mode to RGMII-ID") Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-10-19apalis-imx6: use dynamic DDR calibrationFrancesco Dolcini1-0/+19
Enable dynamic DDR calibration to have a reliable behavior on edge temperatures conditions. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2021-10-19colibri-imx6: use dynamic DDR calibrationFrancesco Dolcini1-0/+22
Enable dynamic DDR calibration to have a reliable behavior on edge temperatures conditions. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2021-09-16Merge tag 'v2021.10-rc4' into nextTom Rini1-1/+1
Prepare v2021.10-rc4 Signed-off-by: Tom Rini <trini@konsulko.com> # gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # board/Arcturus/ucp1020/spl.c # cmd/mvebu/Kconfig # common/Kconfig.boot # common/image-fit.c # configs/UCP1020_defconfig # configs/sifive_unmatched_defconfig # drivers/pci/Kconfig # include/configs/UCP1020.h # include/configs/sifive-unmatched.h # lib/Makefile # scripts/config_whitelist.txt
2021-09-11doc: board: toradex: fix file namesOleksandr Suvorov1-1/+1
Fix the documentation file names: s/apalix/apalis/. Fixes: e98ea49a0e ("toradex: MAINTAINERS: entries for new reST docs") Fixes: 3730106cf0 ("doc: board: apalis-imx8x: add documentation") Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io> Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-07arm: Finish migration of CONFIG_MACH_TYPETom Rini1-15/+15
As this is only useful when booting with ATAGs, which are now largely disabled, remove this value for the remaining platforms. We have a few places in the code that had been testing for MACH_TYPE as a sort of internal logic. Update those to use different but still correct CONFIG symbols. Cc: Phil Sutter <phil@nwl.cc> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-07arm: Disable ATAGs supportTom Rini4-10/+9
With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31Kconfig: Remove all default n/no optionsMichal Simek1-1/+0
default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31imx: Finish migration of IMX_CONFIG to KconfigTom Rini7-0/+21
- Provide a default Kconfig value of the default script - Largely continue to define this via the board Kconfig file - For the boards that select a script based on defconfig rather than TARGET, keep this within the defconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-16board: apalis-tk1: launch toradex easy installer in usb recoveryMarcel Ziswiler1-2/+18
The USB recovery mode is used by Toradex to load the Toradex Easy Installer image which supports further system images installation. Prepare for loading and launching the Toradex Easy Installer if the USB Recovery mode is activated. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-08-09board: colibri_vf: fix compiling warningOleksandr Suvorov1-1/+1
This patch fixes the following compiler warning: ============= board/toradex/colibri_vf/colibri_vf.c: In function 'ft_board_setup': board/toradex/colibri_vf/colibri_vf.c:436:6: warning: unused variable 'ret' [-Wunused-variable] ============= Fixes: be3f1a56bf8 ("video: fsl_dcu_fb: add DM_VIDEO support") Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-08-09board: colibri_imx6: add board_fit_config_name_match to support FIT in SPLMing Liu1-0/+10
Only one dtb is currently supported, so match with imx6-colibri. Signed-off-by: Ming Liu <ming.liu@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-08-09board: toradex: make USB PID from config block optionalStefan Agner2-1/+11
If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-08-09board: colibri_imx7: use SDP if USB serial downloader has been usedStefan Agner1-0/+10
In case USB serial downloader has been used to load U-Boot start the serial download protocol (SDP) emulation. This allows to download complete images such as Toradex Easy Installer over USB SDP as well. This code uses the boot ROM provided boot information to reliably detect USB serial downloader. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-08-02global: Convert simple_strtoul() with decimal to dectoul()Simon Glass1-7/+7
It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-04-20toradex: configblock: fix module revision in config blockDenys Drozdov1-1/+3
U-boot might display wrong module revision information for modules with an assembly version 'K'. "cfgblock create" does not takes into account all revision digits from PID8. This fix takes into account all digits of PID8 to store module revision. Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-03-02reset: Remove addr parameter from reset_cpu()Harald Seiler6-6/+6
Historically, the reset_cpu() function had an `addr` parameter which was meant to pass in an address of the reset vector location, where the CPU should reset to. This feature is no longer used anywhere in U-Boot as all reset_cpu() implementations now ignore the passed value. Generic code has been added which always calls reset_cpu() with `0` which means this feature can no longer be used easily anyway. Over time, many implementations seem to have "misunderstood" the existence of this parameter as a way to customize/parameterize the reset (e.g. COLD vs WARM resets). As this is not properly supported, the code will almost always not do what it is intended to (because all call-sites just call reset_cpu() with 0). To avoid confusion and to clean up the codebase from unused left-overs of the past, remove the `addr` parameter entirely. Code which intends to support different kinds of resets should be rewritten as a sysreset driver instead. This transformation was done with the following coccinelle patch: @@ expression argvalue; @@ - reset_cpu(argvalue) + reset_cpu() @@ identifier argname; type argtype; @@ - reset_cpu(argtype argname) + reset_cpu(void) { ... } Signed-off-by: Harald Seiler <hws@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass15-0/+15
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-05Merge tag 'dm-pull-5jan21' of git://git.denx.de/u-boot-dm into nextWIP/05Jan2021-nextTom Rini5-7/+7
Driver model: make some udevice fields private Driver model: Rename U_BOOT_DEVICE et al. dtoc: Tidy up and add more tests ns16550 code clean-up x86 and sandbox minor fixes for of-platdata dtoc prepration for adding build-time instantiation
2021-01-05Merge tag 'v2021.01-rc5' into nextTom Rini22-65/+450
Prepare v2021.01-rc5 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-05dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()Simon Glass1-2/+2
In the spirit of using the same base name for all of these related macros, rename this to have the operation at the end. This is not widely used so the impact is fairly small. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05dm: Rename U_BOOT_DEVICE() to U_BOOT_DRVINFO()Simon Glass4-5/+5
The current macro is a misnomer since it does not declare a device directly. Instead, it declares driver_info record which U-Boot uses at runtime to create a device. The distinction seems somewhat minor most of the time, but is becomes quite confusing when we actually want to declare a device, with of-platdata. We are left trying to distinguish between a device which isn't actually device, and a device that is (perhaps an 'instance'?) It seems better to rename this macro to describe what it actually is. The macros is not widely used, since boards should use devicetree to declare devices. Rename it to U_BOOT_DRVINFO(), which indicates clearly that this is declaring a new driver_info record, not a device. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-26toradex: hand over maintainershipIgor Opaniuk9-9/+9
Hand over maintainership of Toradex SoMs (that I was responsible of) to Oleksandr because of my resignation from Toradex, as such I will have no immediate involvement with these modules and as a result not able to continue maintaining these boards. CC: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-13dm: treewide: Rename ..._platdata variables to just ..._platSimon Glass4-7/+7
Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename 'platdata' variables to just 'plat'Simon Glass4-5/+5
We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-08Merge https://gitlab.denx.de/u-boot/custodians/u-boot-imxWIP/08Dec2020Tom Rini11-40/+405
2020-12-06colibri-imx8x: add implementation for board_mem_get_layoutIgor Opaniuk1-0/+23
Add implementation of board_mem_get_layout for overriding the memory layout. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-12-06apalis-imx8x: add implementation for board_mem_get_layoutIgor Opaniuk1-0/+23
Add implementation of board_mem_get_layout for overriding the memory layout. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-12-06apalis-imx8: add implementation for board_mem_get_layoutIgor Opaniuk1-0/+23
Add implementation of board_mem_get_layout for overriding the memory layout. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06board: toradex: add apalis-imx8x 2gb wb it v1.1a module supportIgor Opaniuk5-0/+201
This commit adds initial support for the Toradex Apalis iMX8X 2GB WB IT V1.1A System on Module support [1]. Boot log: U-Boot 2020.10-02940-g894aebb7e8-dirty (Oct 22 2020 - 09:43:57 +0300) CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial@5a070000 Out: serial@5a070000 Err: serial@5a070000 Model: Toradex Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT V1.1A, Serial# 06617018 Net: eth0: ethernet@5b040000 [PRIME] Hit any key to stop autoboot: 0 Functionality wise the following is known to be working: - eMMC and MMC/SD card - Ethernet (*) - GPIOs - I2C Unfortunately, there is no USB functionality for the i.MX 8QXP as of yet. * With the SCU FW from the latest Toradex BSP 5.0.0 (SCU FW 1.5.1) ETH PHY encounters bring up problems after reset, this will be fixed soon on SCU FW side. [1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8x Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06verdin-imx8mm: automatic ram size detectionMarcel Ziswiler1-0/+10
Implement board_phys_sdram_size() to automatically detect Verdin iMX8M Mini DualLite 1GB vs. Verdin iMX8M Mini Quad 2GB. Note: This only works if we keep using similar RAM chips! Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06toradex: tdx-cfg-clock: fix i.mx 8m mini interactiveMarcel Ziswiler1-17/+9
Now with them first Verdin iMX8M Mini DualLite modules in for bring-up we got clarity how is_cpu_type() actually behaves. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06verdin-imx8mm: spl: enable pca9450 i2c level translatorMax Krummenacher1-0/+2
Enable PCA9450 i2c level translator, as this is used for the on module ADC. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06verdin-imx8mm: implement hardware version detectionMax Krummenacher1-0/+71
And select the correct devicetree accordingly by setting the variant environment variable. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-12-06verdin-imx8mm: spl: switch to pca9450 pmicMax Krummenacher1-22/+20
V1.1A HW switched the PMIC from BD71837 to PCA9450. - Disable combined DVS in PCA9450_BUCK123_DVS. - Increase DDR Voltage to 0.95V as we use a 1.5GHz RAM. - Configure WDOG_B behaviour. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06toradex: tdx-cfg-clock: add new i.mx 8m mini/plus skusMarcel Ziswiler2-14/+36
Add new i.MX 8M Mini/Plus SKUs to ConfigBlock handling: 0058: Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT 0059: Verdin iMX8M Mini Quad 2GB IT 0060: Verdin iMX8M Mini DualLite 1GB WB IT 0061: Verdin iMX8M Plus Quad 2GB Rename existing SKU (use correct one): Verdin iMX8M Nano SoloLite 1GB -> Verdin iMX8M Nano Quad 1GB Wi-Fi Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-12-04colibri_t30: disable rs232 serial transceiver forceoff pinsMarcel Ziswiler1-0/+11
Use gpio_early_init_uart() function to disable RS232 serial transceiver ForceOFF# pins on Iris. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-12-04apalis/colibri_t30: avoid uart input from floating pinsMarcel Ziswiler2-6/+10
Avoid UART input from floating RX pins on UARTB and UARTC (Colibri T30) and UARTB, UARTC and UARTD (Apalis T30). Note: Floating pins may cause spurious break conditions potentially interrupting U-Boot's autoboot. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-12-04colibri_t30: fix spi1 and uart2/3 resp. uartb/c pinmuxingMarcel Ziswiler1-11/+12
Fix SPI1 and UART2/3 resp. UARTB/C pinmuxing. Note: The former was illegally muxing multiple SoC balls onto the same internal SoC signal which caused rather strange behaviour regarding the RS232 serial transceiver ForceOFF# pins as available on Iris. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-12-04apalis/colibri_t30: add comment about tristate and input vs. output pinmuxingMarcel Ziswiler2-0/+4
Add pinmuxing comment stating that TRISTATE means the output driver is tri-stated and INPUT means the input driver is enabled vs. OUTPUT where it is disabled. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-09-17apalis-imx8qm: rename all occurences to apalis-imx8Philippe Schenker2-1/+1
The Toradex product is called apalis-imx8 consisting of SoM with i.MX8QM and i.MX8QP SoCs. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
generated by cgit v1.1 at 2024-07-14 18:25:46 +0000