aboutsummaryrefslogtreecommitdiff
path: root/board/siemens
AgeCommit message (Collapse)AuthorFilesLines
2024-07-22board: siemens: Remove duplicate newlinesMarek Vasut2-2/+0
Drop all duplicate newlines. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2024-05-20Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"WIP/20May2024-nextTom Rini6-6/+4
As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-19Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""Tom Rini6-4/+6
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07board: siemens: Remove <common.h> and add needed includesTom Rini6-6/+4
Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-04-22common: Convert *.c/h from UTF-8 to ASCII enconfingMichal Simek1-4/+4
Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
2024-02-05siemens: factoryset: use correct config for soc specific implementationEnrico Leto2-4/+4
Adding the capricorn board family some parts diverge from draco family. The switches used were not pertinent and need to be enhanced for each new board of the capricorn family. Replace them through the SOC name 'AM33XX' and 'IMX8'. Signed-off-by: Enrico Leto <enrico.leto@siemens.com>
2024-02-05siemens: board: clean up includesEnrico Leto9-97/+23
Many includes were not removed when code parts were moved or removed. Signed-off-by: Enrico Leto <enrico.leto@siemens.com>
2024-02-05siemens: board: clean up products folders vs commonEnrico Leto13-90/+64
The common folder was initialially created for the common parts of the products based on draco-am355x board family. These are the product lines 'pxm2', 'rut' and the base line named 'draco'! Adding the new capricorn-imx8 board family, common was enhanced without cleanup. - rename 'common/board.c' to 'common/board_am335x.c' - add 'common/board_am335x.h' for export to the product lines Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Signed-off-by: Enrico Leto <enrico.leto@siemens.com>
2024-02-05siemens: board: etamin: remove deprecated nand configEnrico Leto3-32/+0
NAND was used in the early development phase of etamin. The board runs now on MMC. This setting is no more used -> remove to simplify the board file. Further clean-up of etamin should remove all NAND settings. Complete clean- up of etamin board will take place in a separate patch serie. Signed-off-by: Enrico Leto <enrico.leto@siemens.com>
2024-02-05siemens: eeprom: simplify setup & readEnrico Leto13-77/+84
Since we have boards using the driver model or not for i2c, use abstraction function to probe the i2c, check the EEPROM and read from EEPROM. Signed-off-by: Enrico Leto <enrico.leto@siemens.com>
2024-02-05siemens: eeprom: clean up definitionsEnrico Leto7-20/+39
Move the I2C and EEPROM address definitions in common board header. Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Signed-off-by: Enrico Leto <enrico.leto@siemens.com>
2023-11-22siemens,am335x: clean-up draco targetsEnrico Leto2-27/+10
Draco is a family of 3 boards: thuban, rastaban & etamin. Rename all targets of the family adding the draco- prefix to increase readibility and simplify future commits about concerning all boards of the family. The name draco was initially used for the first target. It's deprecated since a 2nd target was introduced. Unfortunately the draco target was copied to the thuban target instead to be renamed. Remove it to save unnecessary maintenance effort. Signed-off-by: Enrico Leto <enrico.leto@siemens.com>
2023-11-22arm: mach-k3: am65x: Move board selection to mach-k3Andrew Davis1-10/+0
Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
2023-11-22board: ti: Add dependency from TARGET selection to SOCAndrew Davis1-1/+1
Currently the K3 selection for TARGET boards does not depend on the SoC for which it is based. This leds to the odd ability to select for instance both SOC_K3_AM625 and TARGET_J721E_A72_EVM. To fix this the target choice should depend on the matching SOC config. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
2023-11-10tree-wide: Replace http:// link with https:// link for ti.comNishanth Menon14-14/+14
Replace instances of http://www.ti.com with https://www.ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2023-10-27board: siemens: iot2050: Fix M.2 detectionJan Kiszka1-5/+6
The "simpler" the logic, the higher the probability to not test and get things wrong, again: The absence of a "-PG2" suffix is not sufficient to derive that we are on PG1. There is also "IOT2050-ADVANCED-M2". Finally fix that by exactly matching against the two PG1 device names. While changing this, we can also drop the not really needed check for !board_is_sr1 in board_is_m2 and call the boards by their names ("board_is_pg1"). Reported-and-tested-by: Bao Cheng Su <baocheng.su@siemens.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-10-11board: siemens: iot2050: Fix logical bug in PG1/PG2 detectionJan Kiszka1-1/+1
This caused the wrong fdtfile to be set and was failing to apply M.2 settings. Fixes: badaa1f6a7a9 ("boards: siemens: iot2050: Unify PG1 and PG2/M.2 configurations again") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-09-08include: env: ti: ti_armv7_common.env: Rename to ti_common.envNishanth Menon1-1/+1
ti_armv7_common does not make any more sense as it is used by armv7 and armv8 TI based platforms. Reported-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-21Merge tag 'v2023.10-rc3' into nextTom Rini1-1/+1
Prepare v2023.10-rc3 Signed-off-by: Tom Rini <trini@konsulko.com>
2023-08-09env: Use include/env for text-environment includesSimon Glass1-1/+1
The 'environment' word is too long. We mostly use 'env' in U-Boot, so use that as the name of the include directory too. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-08-09treewide: rework linker symbol declarations in sections headerShiji Yang1-0/+1
1. Convert all linker symbols to char[] type so that we can get the corresponding address by calling array name 'var' or its address '&var'. In this way, we can avoid some potential issues[1]. 2. Remove unused symbol '_TEXT_BASE'. It has been abandoned and has not been referenced by any source code. 3. Move '__data_end' to the arch x86's own sections header as it's only used by x86 arch. 4. Remove some duplicate declared linker symbols. Now we use the standard header file to declare them. [1] This patch fixes the boot failure on MIPS target. Error log: SPL: Image overlaps SPL Fixes: 1b8a1be1a1f1 ("spl: spl_legacy: Fix spl_end address") Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-07-28boards: siemens: iot2050: Unify PG1 and PG2/M.2 configurations againJan Kiszka3-35/+23
This avoids having to maintain to defconfigs that are 99% equivalent. The approach is to use binman to generate two flash images, flash-pg1.bin and flash-pg2.bin. With the help of a template dtsi, we can avoid duplicating the common binman image definitions. Suggested-by: Andrew Davis <afd@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-07-28boards: siemens: iot2050: Fix boot configurationJan Kiszka1-0/+2
The common env bits now come via ti_armv7_common.env, include it. Furthermore restore the board-specific boot targets and their ordering that is now enforced k3-wide differently. Finally, enable CONFIG_LEGACY_IMAGE_FORMAT explicitly which got lost while turning FIT_SIGNATURE on by default for k3 devices. Fixes: 53873974 ("include: armv7: Enable distroboot across all configs") Fixes: 4ae1a247 ("env: Make common bootcmd across all k3 devices") Fixes: 86fab110 ("Kconfig: Enable FIT_SIGNATURE if ARM64") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-07-25MAINTAINERS: Add some missing defconfig files to existing entriesTom Rini1-1/+2
We have a few places where defconfigs were added (or renamed) and not included in their previously listed MAINTAINERS entry, correct this. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Adam Ford <aford173@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-07-13imx: siemens/capricorn: correct SCU API usagePeng Fan1-6/+6
The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-05-21imx: move imx8 sci header file to include/firmware/imxPeng Fan1-1/+1
Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
2023-04-24arm: mach-k3: Remove empty sys_proto.h includeAndrew Davis1-1/+0
This header file is now empty, remove it. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2023-04-24arm: mach-k3: Move MSMC fixup to SoC levelAndrew Davis1-10/+1
The MSMC fixup is something we do based on SoC, not based on the board. So this fixup does not belong in the board files. Move this to the mach-k3 common file so that it does not have to be done in each board that uses these SoCs. We use ft_system_setup() here instead of ft_board_setup() since it is no longer board level. Enable OF_SYSTEM_SETUP in the configurations that use this to keep functionality the same. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2023-03-29iot2050: Add support for configuring M.2 connectorJan Kiszka1-1/+258
The M.2 slots of the related IOT2050 variant need to be configured according to the plugged cards. This tries to detect the card using the M.2 configuration pins of the B-key slot. If that fails, a U-Boot environment variable can be set to configure manually. This variable is write-permitted also in secure boot mode as it is not able to undermine the integrity of the booted system. The configuration is then applied to mux the serdes and to fix up the device tree passed to or loaded by the bootloader. The fix-ups are coming from device tree overlays that are embedded into the firmware image and there also integrity protected. The OS remains free to load a device tree to which they do not apply: U-Boot will not fail to boot in that case. Based on original patch by Chao Zeng. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-03-29board: siemens: iot2050: use the named gpio to control the user-buttonchao zeng1-1/+1
User-button is controlled by the mcu domain gpio number 25. But main0 main1 mcu domain all have gpio number 25. To identify where the gpio is from, Using gpio controll base as the prefix to indicate the gpio resource. Signed-off-by: chao zeng <chao.zeng@siemens.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-29arm: dts: iot2050: Optionally embed OTP programming data into imageJan Kiszka1-0/+7
Use external blob otpcmd.bin to replace the 0xff filled OTP programming command block to create a firmware image that provisions the OTP on first boot. This otpcmd.bin is generated from the customer keys using steps described in the meta-iot2050 integration layer for the device. Based on original patch by Baocheng Su. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-03-29iot2050: Add watchdog start to bootcmdJan Kiszka1-0/+8
Allows run-time control over watchdog auto-start and the timeout via setting the environment variable watchdog_timeout_ms. A value of zero means "do not start". Use CONFIG_WATCHDOG_TIMEOUT_MSECS as initial value and this to zero by default. Users can then enable the watchdog once the use and OS which picks it up during boot. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-03-29iot2050: Migrate settings into board env fileJan Kiszka1-0/+9
Anything that is not boot-env related is better kept there by now. At this chance, also drop a stale comment from iot2050.h Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-03-29arm: dts: iot2050: Use the auto generator nodes for fdtSu Baocheng1-0/+3
Refactor according to the entry `fit: Entry containing a FIT` of document tools/binman/README.entries. As the generator uses the device tree name for the config description, board_fit_config_name_match requires a small adjustment as well. Signed-off-by: Su Baocheng <baocheng.su@siemens.com> [Jan: re-add now required CONFIG_OF_LIST, update config matching] Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-29board: siemens: iot2050: Split the build for PG1 and PG2Su Baocheng2-14/+26
Due to different signature keys, the PG1 and the PG2 boards can no longer use the same FSBL (tiboot3). This makes it impossible anyway to maintaine a single flash.bin for both variants, so we can also split the build. A new target is added to indicates the build is for PG1 vs. PG2 boards. Hence now the variants have separated defconfig files. The runtime board_is_sr1() check does make no sense anymore, so remove it and replace with build time check. Documentation is updated accordingly. New binary artifacts are already available via meta-iot2050. Signed-off-by: Su Baocheng <baocheng.su@siemens.com> [Jan: refactor config option into targets, tweak some wordings] Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2022-12-22etamin: Rework CONFIG_NAND_CS_INITTom Rini3-2/+11
Enable this in the board Kconfig file, but then check for it via CONFIG_IS_ENABLED so that it will only be true in the non-SPL case, as is done today. As part of this we move some defines local to where they are used as it's board specific. Cc: Samuel Egli <samuel.egli@siemens.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05global: Move remaining CONFIG_SYS_* to CFG_SYS_*Tom Rini2-2/+2
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*Tom Rini5-13/+13
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_NAND_* to CFG_SYS_NAND_*Tom Rini3-13/+13
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NAND namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-09imx: imx8qxp: giedi switch to binmanOliver Graute1-1/+1
Switch to use binman to pack images Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2022-10-31Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASESimon Glass1-1/+1
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-08-04Audit <flash.h> inclusionTom Rini1-1/+0
A large number of files include <flash.h> as it used to be how various SPI flash related functions were found, or for other reasons entirely. In order to migrate some further CONFIG symbols to Kconfig we need to not include flash.h in cases where we don't have a NOR flash of some sort enabled. Furthermore, in cases where we are in common code and it doesn't make sense to try and further refactor the code itself in to new files we need to guard this inclusion. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-25arm: mach-k3: Rename SOC_K3_AM6 to SOC_K3_AM654Andrew Davis1-1/+1
The first AM6x device was the AM654x, but being the first we named it just AM6, since more devices have come out with this same prefix we should switch it to the normal convention of using the full name of the first compatibility device the series. This makes what device we are talking about more clear and matches all the K3 devices added since. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-06-28siemens: Move CONFIG_FACTORYSET to KconfigTom Rini1-0/+2
Introduce board/siemens/common/Kconfig and have it hold FACTORYSET to start with. Use select for this on the boards that need it. Cc: Anatolij Gustschin <agust@denx.de> Cc: Samuel Egli <samuel.egli@siemens.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-28led: Drop led_default_state()Marek Vasut1-4/+0
This function is empty, drop it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Sean Anderson <seanga2@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Steven Lawrance <steven.lawrance@softathome.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-04-08corvus: Migrate CONFIG_*_LED out of CONFIG namespaceTom Rini1-2/+22
This code is only used on the corvus platform, so migrate the LED on/off code to this platform and remove it from the CONFIG namespace. In theory, this should likely be moved to the modern GPIO LED driver as a further cleanup. Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2022-03-28video: siemens: Drop unused video codeSimon Glass5-449/+0
Drop this old code which is not built anymore, as it depends on CONFIG_VIDEO which has been removed. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-25Convert CONFIG_AT91_LED to KconfigTom Rini1-0/+3
This converts the following to Kconfig: CONFIG_AT91_LED Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-08imx: Don't define __ASSEMBLY__ in source filesSimon Glass2-2/+0
This is supposed to be a build-system flag. Move it there so we can define it before linux/kconfig.h is included. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-27Convert CONFIG_CONS_INDEX et al to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_CONS_INDEX CONFIG_DEBUG_UART_CLOCK CONFIG_FSL_TZPC_BP147 CONFIG_GENERIC_ATMEL_MCI CONFIG_IDENT_STRING CONFIG_LIBATA CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_LPC32XX_GPIO CONFIG_MP CONFIG_MPC8XXX_GPIO CONFIG_MTD_PARTITIONS CONFIG_MVGBE CONFIG_MXC_GPIO CONFIG_NR_DRAM_BANKS CONFIG_OF_BOARD_SETUP CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_OF_SYSTEM_SETUP CONFIG_PREBOOT CONFIG_ROCKCHIP_SERIAL CONFIG_RTC_ENABLE_32KHZ_OUTPUT CONFIG_RTC_MV CONFIG_SCSI_AHCI CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_SPEED CONFIG_SOFT_SPI CONFIG_SPI_FLASH_EON CONFIG_SPI_FLASH_MACRONIX CONFIG_SPI_FLASH_MTD CONFIG_SPI_FLASH_SPANSION CONFIG_SPI_FLASH_SST CONFIG_SPI_FLASH_STMICRO CONFIG_SUPPORT_RAW_INITRD CONFIG_SYS_ARCH_TIMER CONFIG_SYS_BOARD CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE CONFIG_SYS_DCACHE_OFF CONFIG_SYS_FDT_SAVE_ADDRESS CONFIG_SYS_FLASH_CFI CONFIG_SYS_FSL_ERRATUM_ESDHC135 CONFIG_SYS_HAS_SERDES CONFIG_SYS_L2CACHE_OFF CONFIG_SYS_LITTLE_ENDIAN CONFIG_SYS_LOAD_ADDR CONFIG_SYS_MMCSD_FS_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR CONFIG_SYS_NS16550 CONFIG_SYS_PLLFIN CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_TIMER_SYS_TICK_CH CONFIG_USB_EHCI_FSL CONFIG_U_QE CONFIG_VERSION_VARIABLE Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.1 at 2024-09-28 18:38:41 +0000