aboutsummaryrefslogtreecommitdiff
path: root/board/gateworks
AgeCommit message (Collapse)AuthorFilesLines
2022-06-28gw_ventana: Migrate to using CONFIG_EXTRA_ENV_TEXTWIP/2022-06-28-Kconfig-migrationsTom Rini1-0/+145
Move the environment text over from being set via CONFIG_EXTRA_ENV_SETTINGS in include/configs/gw_ventana.h and over to plain text in board/gateworks/gw_ventana/gw_ventana.env. This lets us drop CONFIG_EXTRA_ENV_SETTINGS_COMMON as everything resides in a single environment file now. Cc: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Tim Harvey <tharvey@gateworks.com>
2022-06-14imx: imx8mm/n/p-venice: enable pinctrl_wdog in SPLPeng Fan1-29/+0
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code, The set_wdog_reset() function is not necessary as this is handled by the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property being set. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-05-20board: gateworks: gw_ventana: remove obsolete fileTim Harvey1-471/+0
commit 61cf22505339 ("board: gateworks: gw_ventana: use comomn GSC driver") moved to the common GSC driver and moved remaining board-specific functions to eeprom.c. The functions in gsc.c are no longer used and it was removed from the Makefile but the file itself was not removed. Remove it now. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-05-20board: gateworks: gw_ventana: add support for GPY111 PHYTim Harvey1-6/+21
The MaxLinear GPY111 PHY is being used on some boards due to part availability. Add support for this PHY which requires a longer reset post-delay and RGMII delay configuration. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-05-20board: gateworks: venice: enable SPL_DM_SERIALTim Harvey1-21/+2
The uart2 and its pinmux are already marked with u-boot,dm-spl but we need to move the call to preloader_console_init() after spl_early_init() to avoid a board hang as dm can't be used until after spl_early_init() due to the uart driver not enabling the uart clock. Remove the manual config of the UART pinmux now that it is no longer needed. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-28led: Drop led_default_state()Marek Vasut1-2/+0
This function is empty, drop it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Sean Anderson <seanga2@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Steven Lawrance <steven.lawrance@softathome.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-04-21board: gateworks: venice: add imx8mp-venice-gw740x supportTim Harvey8-10/+1968
The GW74xx is based on the i.MX 8M Plus SoC featuring: - LPDDR4 DRAM - eMMC FLASH - Gateworks System Controller - PCIe Gen 3.0 switch (build option) - USB 3.0 HUB - USB Type-C front panel connector - GPS - 3-axis accelerometer - CAN bus - 6x GbE RJ45 front-panel jacks - 1x IMX8M FEC RGMII GbE (with Passive PoE) - 5x IMX8M EQOS RGMII 6 port GbE Switch (1x with 802.3af class 5 Active PoE) - RS232/RS485/RS422 serial transceiver - MIPI header (DSI/CSI/GPIO/PWM/I2S) - DigI/O header (UART/GPIO/I2C/ADC) - 802.11ac WiFi - Bluetooth BLE - 3x MiniPCIe sockets with PCI/USB - 1x M.2 Socket with USB2.0, PCIe, and dual-SIM - PMIC - Wide range DC input supply (8V to 60V DC) Do the following to add support for this and future imx8mp-venice boards: - add dts - add DRAM config - add PMIC config - add IMX8MP support in spl.c and venice.c Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21board: gateworks: venice: add additional levels for dtb name matchTim Harvey1-0/+8
Gateworks produces many products from a single PCB with subloaded components. Add an additional two levels of dtb name matching so that for example a GW7400-A matches the dtb name of gw74xx.dtb Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21board: gateworks: gw_ventana: use comomn GSC driverTim Harvey9-177/+261
Use the common GSC driver. This allows us to do some additional cleanup: - use the GSC driver functions - move waiting for the EEPROM to the SPL int (it will always be ready after this) - move eeprom functions into eeprom file and elimate GSC_I2C_BUS - eliminate some redundant EEPROM reads (the EEPROM must be read in SPL before relocation, in SPL after relocation, and in U-Boot init. All subsequent uses can use the global structure) - remove unnecessary header files and alphabatize includes Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21board: gateworks: venice: use common GSC driverTim Harvey6-763/+398
Use the common GSC driver. This allows us to do some additional cleanup: - rename gsc{.c,.h} to eeprom{.c.h} for clarity - collapse eeprom_get_dev - remove unnecessary header files and alphabatize includes Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-13board: gateworks: venice: add imx8mm-gw7903 supportTim Harvey5-624/+2997
The GW7903 is based on the i.MX 8M Mini SoC featuring: - LPDDR4 DRAM - eMMC FLASH - microSD socket with voltage select support - Gateworks System Controller - M.2 A-E Socket with USB2.0 and PCIe - MiniPCIe Socket with PCIe, USB2.0, and SIM - IMX8M FEC - RS232/RS485/RS422 serial transceiver - LIS2DE12 3-axis accelerometer - front panel LED's - off-board isolated digital I/O - Wide range DC power input - 802.3at PoE - PMIC Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-12board: gateworks venice: add support for GPY111 phyTim Harvey1-0/+16
The TI DP83867 phy has been replaced with the MaxLinear GPY111 phy due to part availability. Add support for it by adding LED config and dt-prop based internal delay config tx-delay/rx-delay per PHY ID. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2022-04-12board: venice: add spl_board_loader_nameTim Harvey1-0/+14
Implement spl_board_loader_name to provide more meaningful device names vs MMC1 and MMC2. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-12board: gateworks: gw_ventana: move ft_early_fixups out of commonTim Harvey4-155/+146
DM is not used for the SPL and a generic DT is used in the SPL which requires no fixups. Remove the call in the SPL and move the function into the U-Boot code. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-12board: gateworks: gw_ventana: move GPIO config out of commonTim Harvey3-88/+85
Move gpio configuration out of common and into u-boot code as it is not used by the SPL. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-12board: gateworks: gw_ventana: move SPL uart config out of commonTim Harvey3-13/+11
Since DM_SERIAL is used for U-Boot we no longer need legacy UART code in common.c shared by the SPL and U-Boot. Move the legacy UART config to the non-DM SPL. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-12board: gateworks: gw_ventana: convert to DM_I2CTim Harvey7-292/+331
convert to DM_I2C for U-Boot while leaving SPL legacy I2C: - Move I2C config from common to SPL - Move PMIC config from common to SPL (no need to re-configure pmic) - add DM_I2C support to eeprom/gsc functions shared by SPL and U-Boot Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-03-31board: gateworks: venice: determine dram size at runtimeTim Harvey1-11/+2
The SPL does not update the memory node with the dram size from EEPROM but instead we can use get_ram_size which does a simple memory test to determine the available RAM. Update PHYS_SDRAM_SIZE to 4GiB as that is the max used on the Venice boards. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-03-31board: gw_ventana: gsc: fix GSC read/write functionsTim Harvey1-2/+2
commit 7c84319af9c7 ("dm: gpio: Correct use of -ENODEV in drivers") changed the return code for an I2C NAK from -ENODEV to -EREMOTEIO. Update the gsc_i2c_read and gsc_i2c_write functions for this change to properly retry the transaction on a NAK meaning the GSC is busy. Fixes: 7c84319af9c7 ("dm: gpio: Correct use of -ENODEV in drivers") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-02-19board: gateworks: venice: add imx8mn-gw7902 supportTim Harvey11-7/+2456
The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring: - LPDDR4 DRAM - eMMC FLASH - Gateworks System Controller - LTE CAT M1 modem - USB 2.0 HUB - M.2 Socket with USB2.0, PCIe, and dual-SIM - IMX8M FEC - PCIe based GbE - RS232/RS485/RS422 serial transceiver - GPS - CAN bus - WiFi / Bluetooth - MIPI header (DSI/CSI/GPIO/PWM/I2S) - PMIC To add support for the i.MX8M Nano GW7902: - Add imx8mn-venice dts/defconfig/include - Add imx8mn-gw7902 dts - Add imx8mn-2gb lpddr4 dram configs - Add misc support for IMX8M Nano SoC - rename imx8mm-venice.c to venice.c as it is no longer imx8mm specific - update README with differences for IMX8MN vs IMX8MM Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-08imx: Don't define __ASSEMBLY__ in source filesSimon Glass1-1/+0
This is supposed to be a build-system flag. Move it there so we can define it before linux/kconfig.h is included. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-10Merge branch 'next'WIP/10Jan2022Tom Rini1-2/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-07imx8mm_venice: switch to use binman to pack imagesTim Harvey3-3/+11
Use binman to pack images. Note that imx8mm_venice supports several boards via multiple DTB's thus in the fit node we must use: - fit,fdt-list = "of-list" - fdt-SEQ - config-SEQ Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-19fdt_support: Remove FDT_STATUS_FAIL_ERROR_CODEMarek Behún1-2/+1
Since no one uses this feature and I am not aware of any parsers of this in Linux, remove it. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Pratyush Yadav <p.yadav@ti.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Michael Walle <michael@walle.cc> Cc: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-07imx: ventana: fix USB hub resetTim Harvey1-35/+0
Remove board_ehci_hcd_init function that is not used with DM_USB and replace its functionality with device-tree configuraton that treats USB HUB RST# as a gpio enable for the usbh1 vbus regulator. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-10-07imx: ventana: update LVDS supportTim Harvey1-17/+42
Enable LVDS display detection and panel-specific configuration Make I2C based LVDS detection and configuration model specific: - not all boards support LVDS connectors; fail detection that do not support LVDS to avoid misdetecting an I2C device as a display - GPIO configuration is panel specific; use panel name where needed Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-10-07imx: ventana: remove phy gpio reset from dtTim Harvey1-0/+8
We configure network phy configuration for internal delay, LED config, and clock config. If we leave the phy reset gpio defined in dt the kernel may issue a reset to the phy and break these configs. While some may be handled by a kernel phy driver, others may not (typically LED config). Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-10-07board: gateworks: venice: update thermal temp thresholds per cpu gradeTim Harvey1-0/+18
Update the passive/critical thermal zone dt config per CPU temperature grade. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-10-07board: gateworks: venice: do not overwrite serial#Tim Harvey1-1/+2
Do not overwrite existing serial# env to avoid: ## Error: Can't overwrite "serial#" ## Error inserting "serial#" variable, errno=1 Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-10-07board: gateworks: venice: display hwmon details by defaultTim Harvey1-0/+3
Display hwmon values by default when using the 'gsc' command. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-09-30WS cleanup: remove trailing empty linesWolfgang Denk2-2/+0
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-08-31imx: Finish migration of IMX_CONFIG to KconfigTom Rini1-0/+3
- Provide a default Kconfig value of the default script - Largely continue to define this via the board Kconfig file - For the boards that select a script based on defconfig rather than TARGET, keep this within the defconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-09board: gateworks: venice: add board model to dtTim Harvey1-0/+8
Add the specific board model from EEPROM config to the device-tree to make it easier to access from Linux userspace. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09board: gateworks: venice: add imx8mm-gw7902 supportTim Harvey3-2/+526
The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring: - LPDDR4 DRAM - eMMC FLASH - Gateworks System Controller - LTE CAT M1 modem - USB 2.0 HUB - M.2 Socket with USB2.0, PCIe, and dual-SIM - IMX8M FEC - PCIe based GbE - RS232/RS485/RS422 serial transceiver - GPS - CAN bus - WiFi / Bluetooth - MIPI header (DSI/CSI/GPIO/PWM/I2S) - PMIC Do the following to add support for it: - add dts - add PMIC config Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09board: gateworks: venice: add board model/serial# to envTim Harvey3-31/+41
Add board model/serial# strings to env. Move the creation of the strings to gsc_read() and the display of the info into gsc_info() so they are available to U-Boot proper. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09board: gateworks: venice: use bus numbers vs namesTim Harvey3-11/+17
replace looking up i2c bus name by bus number and define bus numbers and eeprom address with #defines. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09board: gateworks: venice: get mem size from dtTim Harvey1-14/+14
Get mem size from dt which SPL updated per EEPROM config. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: add support for GW54xx-G revisionTim Harvey1-0/+19
The GW54xx-G revision has the foolowing changes: - replaces the EOL GbE PHY with an updated part (requires an enable pin) - replaces the EOL analog video decoder with an updated part (requires dt prop) - add power control to miniPCIe socket Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: add support for GW53xx-G revisionTim Harvey1-0/+19
The GW53xx-G revision has the foolowing changes: - replaces the EOL GbE PHY with an updated part (requires an enable pin) - replaces the EOL analog video decoder with an updated part (requires dt prop) - add power control to miniPCIe socket Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: add GW5913 supportTim Harvey3-0/+57
The GW5913 is a Single Board Computer based on the NXP i.MX6Q/DL SoC with the following features: - DDR3 DRAM - NAND FLASH (256MiB or 2048MiB) - Gateworks System Periperhal Controller - front panel LED's - front panel pushbutton - Digital I/O connector (I2C/GPIO/UART) - u-blox Zoe-M8Q GPS - 1x RJ45 GbE - 1x MiniPCIe socket with PCIe USB 2.0 and nanoSIM socket - Passive PoE and wide-range DC power supply Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: add GW5912 supportTim Harvey3-1/+32
The GW5912 is a Single Board Computer based on the NXP i.MX6Q/DL SoC with the following features: - DDR3 DRAM - NAND FLASH (256MiB or 2048MiB) - microSD socket - Gateworks System Periperhal Controller - front panel LED's - front panel pushbutton - RS232 connector (2x UARTs) - CAN/RS485 connector - Digital I/O connector (I2C/GPIO) - SPI connector - u-blox Zoe-M8Q GPS - LIS2DE12 Accellerometer - 1x FEC GbE RJ45 with 802.3at Active PoE - 1x PCI GbE RJ45 with Passive PoE - 5x MiniPCIe socket with PCIe/USB 2.0 - 1x MiniPCIe socket with PCIe/USB 2.0 and SIM socket - Aux power input with wide-range DC power supply Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: add GW5910 supportTim Harvey3-0/+50
The GW5910 is a Single Board Computer based on the NXP i.MX6Q/DL SoC with the following features: - DDR3 DRAM - NAND FLASH (256MiB or 2048MiB) - microSD socket - Gateworks System Periperhal Controller - front panel LED's - front panel pushbutton - RS232 connector (2x UARTs) - Digital I/O connector (I2C/GPIO) - SPI connector - u-blox Zoe-M8Q GPS - LIS2DE12 Accellerometer - TI CC1352 ARM Cortex-M4 multiprotocol sub-1GHz / 2.4GHz wireless MCU - On-board brcmfmac WiFi and BT module - RGMII RJ45 GbE - 1x MiniPCIe socket with PCIe/USB 2.0 - 1x MiniPCIe socket with USB 2.0 and nanoSIM socket - Passive PoE and wide-range DC power supply Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: use dt for hwmonTim Harvey1-59/+113
Use dt-bindings for GSC hwmon devices. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: remove hard-coded flexcan standby pinTim Harvey1-21/+0
Flexcan pinmux is configured in kernel dt. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: remove hard-coded analog video codec enableTim Harvey2-26/+0
Analog video codec enable is configured in kernel dt. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: remove hard-coded USB OTG pinmuxTim Harvey1-7/+0
pinmux is now done via dt. Add missing OTG_OC pinmux for boards that use it. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: remove hard-coded PCI resetTim Harvey3-62/+0
PCIe reset configuration is handled via dt now. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: remove hard-coded USB HUBRST# gpio configTim Harvey1-10/+0
The USB HUB reset is handled via dt now. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: replace hard-coded LED config with dt based configTim Harvey2-150/+0
Use device-tree LED config instead of hard-coded board-specific config. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: remove nand field from common ventana structTim Harvey3-18/+4
NAND fdt fixups can be performed without knowing if NAND is present. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
generated by cgit v1.1 at 2024-09-17 07:06:54 +0000