aboutsummaryrefslogtreecommitdiff
path: root/board/freescale
AgeCommit message (Collapse)AuthorFilesLines
2024-05-19Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""Tom Rini164-112/+165
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07board: freescale: Remove <common.h> and add needed includesTom Rini164-165/+112
Remove <common.h> from this board vendor directory and when needed add missing include files directly. Acked-by: Jason Liu <jason.hui.liu@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-04-22Merge patch series "Kconfig: some cleanups"Tom Rini1-1/+1
Michal Simek <michal.simek@amd.com> says: I looked as cleaning up some dependencies and I found that qconfig is reporting some issues. This series is fixing some of them. But there are still some other pending. That's why please go and fix them if they are related to your board. UTF-8: I am using uni2ascii -B < file to do conversion. When you run it in a loop you will find some other issue with copyright chars or some issues in files taken from the Linux kernel like DTs. They should be likely fixed in the kernel first. Based on discussion I am ignoring names too.
2024-04-22common: Convert *.c/h from UTF-8 to ASCII enconfingMichal Simek1-1/+1
Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
2024-04-20imx93: Move SoC and lifeclycle information to debug levelFabio Estevam1-2/+2
The following information printed on every boot is not very helpful for the users: SOC: 0xa0009300 LC: 0x40040 Move them to debug() level. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Mathieu Othacehe <othacehe@gnu.org>
2024-04-05arm: imx9: Correct imx9_probe_mu prototypeYe Li1-1/+1
Since the event callback imx9_probe_mu is re-defined, update its prototype. Signed-off-by: Ye Li <ye.li@nxp.com>
2024-03-30imx8mq_evk: Remove FEC and Ethernet PHY board codeFabio Estevam1-30/+0
With Ethernet DM in place, there is no longer the need for having the board_phy_config() and setup_fec() functions anymore. Remove them. Successfully tested a TFTP transfer after these changes. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2024-03-30imx8: Add a default reset_cpu() implementationFabio Estevam2-16/+0
Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
2024-03-11Merge tag 'v2024.04-rc4' into nextTom Rini1-0/+7
Prepare v2024.04-rc4
2024-03-04imx9: Fix OP-TEE supportMathieu Othacehe1-0/+7
This fixes OP-TEE support by: - Adding tee.bin to container.cfg - Starting ELE RNG in SPL Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
2024-02-27Kconfig: Centralize prompting for SYS_CONFIG_NAMETom Rini3-3/+0
Generally speaking, we do not prompt for this value and define it in the board specific Kconfig file. There are some valid use cases however today where we do prompt for this value, so instead of having this be done in a number of locations, do this at the top-level location only. This removes the question from a number of other locations and makes it consistent that when we do set the value directly, we always do it the same way. We don't need to specify the type, it's always string. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-02-24imx: imxrt1050-evk: Add support for SPI flash bootingJesse Taube4-3/+56
Add support for booting the imxrt1050-evk from spi. Add imximage config and the ability for SPL to boot from NOR. Enable binman in Kconfig and device tree for imxrt* as it is used to prepend fspi_header.bin to SPL and u-boot.img. Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
2024-02-10imx93: Use a header for imx9_probe_mu declarationMathieu Othacehe1-1/+1
Put imx9_probe_mu declaration in a new mu.h header file. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
2024-02-08mx6sabresd: Remove board_phy_config()Fabio Estevam1-34/+0
With Ethernet DM in place, there is no longer the need for having the board_phy_config() anymore. Remove it. Confirmed that TFTP transfer still works fine without board_phy_config(). Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
2023-12-21global: Drop common.h inclusionTom Rini1-1/+0
In order to make it easier to move on to dropping common.h from code directly, remove common.h inclusion from the rest of the header file which had been including it. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2023-12-21arm: Partial cleanup and audit usage of <config.h>Tom Rini2-0/+2
We need to include <config.h> directly when a file needs to have something such as CFG_SYS_SDRAM_SIZE referenced as this file is not automatically globally included and is most commonly indirectly included via common.h. Remove most cases of arm including config.h directly, but add it where needed. This includes a few board-specific fixes. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2023-12-14Merge tag 'u-boot-imx-next-20231214' of ↵Tom Rini5-81/+29
https://gitlab.denx.de/u-boot/custodians/u-boot-imx into next - Add TPM support for venice boards - Add networking support for imx93-evk - Enable TCP, IPv6, wget for DHCOM and Data Modul boards - Enable fastboot support for Toradex boards - Allow pico-imx7d to boot from SD - Enable fastboot for beacon imx8m beacon boards, disabled SYS_CONSOLE_IS_IN_ENV - Fix mxsboot to prevent NAND blocks being reported as bad - Add imx8mm PWM clock support - Several devicetree syncs with the kernel - Add support for i.MX8MP Polyhex Debix Model A SBC - Reworked ddr_load_train_firmware() to get a 50ms boot time improvement
2023-12-13treewide: Tidy up semicolon after command macrosSimon Glass1-1/+1
The U_BOOT_CMD_COMPLETE() macro has a semicolon at the end, perhaps inadvertently. Some code has taken advantage of this. Tidy this up by dropping the semicolon from the macro and adding it to macro invocations as required. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-12-13imx8mp_evk: Remove unneeded header filesFabio Estevam1-13/+0
Cleanup the file by removing unneeded header files. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
2023-12-13imx8mp_evk: Simplify Ethernet initializationFabio Estevam1-27/+1
With DM enabled, there is no need for board code to initialize the Ethernet interfaces. The RTL8211FDI Ethernet PHYs have 25MHz oscillator, so there is no need to enable the RGMII TX clk output. Also, there is no need for describing the deprecated phy-reset FEC properties, nor passing reset properties to the EQOS interface in u-boot.dtsi. Remove all these unneeded pieces. Tested both Ethernet interfaces after these changes. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
2023-12-13imx8mp_evk: Add myself to MAINTAINERSFabio Estevam1-0/+1
I would like to help maintaining the imx8mp_evk board. Add myself to MAINTAINERS. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Peng Fan <peng.fan@nxp.com>
2023-12-13imx8mp_evk: Convert to DM_PMICFabio Estevam1-24/+26
Currently, the imx8mp_evk uses the non-DM code to initialize the PMIC. Convert to DM_PMIC, which is the recommended way to access the PMIC. While at it, fix multi-line comments style. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-12-13net: dwc_eth_qos: Add board_interface_eth_init() for i.MX93Sébastien Szymanski1-16/+0
Add a common board_interface_eth_init() called by the DWC MAC driver to setup the MAC <-> PHY interface according to the PHY mode obtained from DT. Remove the board-side configuration in the i.MX93 EVK files. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2023-12-13imx7d-sdb: Sync devicetree with kernel 6.5-rc1Fabio Estevam1-1/+1
Commit 0aea5dda2928 ("ARM: dts: imx7d-sdb-u-boot: Fix usdhc1 UHS operation") did a temporary workaround by addng the usdhc1 fix inside the -u-boot.dtsi file. The imx7d-sdb.dts from kernel 6.5-rc1 contains the proper UHS fix, so sync the devicetree tree and remove the previous fix from -u-boot.dtsi. Also, adjust the PMIC node name inside pmic_get() to match the devicetree update. Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-11-07ls2080aqds: Add missing headers to eth_ls1088aqds.cTom Rini1-0/+2
As we call sprintf in this file we need to include vsprintf.h in order to get the function prototype and we need linux/string.h for strcmp. Signed-off-by: Tom Rini <trini@konsulko.com>
2023-11-07ls1088a: Add missing headers to eth_ls1088aqds.cTom Rini1-0/+2
As we call sprintf in this file we need to include vsprintf.h in order to get the function prototype and we need linux/string.h for strcmp. Signed-off-by: Tom Rini <trini@konsulko.com>
2023-11-07mpc85xx: Add missing include in mpc85xx_sleep.cTom Rini1-0/+1
This file needs the include file that provides the prototypes for flush_dcache() and others. Signed-off-by: Tom Rini <trini@konsulko.com>
2023-11-07fsl_qe: Drop common.hTom Rini6-6/+0
In both include/fsl_qe.h and then also remove common.h from the files which had included fsl_qe.h Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-16Merge tag 'u-boot-imx-20231016' of ↵Tom Rini1-2/+0
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20231016 ------------------- CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/18168 - Imrovement MX93 - Toradex: fixes - Convert to DM (serial, watchdog) for some boards - HAB improvements for Secure Boot - DTO overlay for DHCOM - USB fixes, Mass storage for MX28 - Cleanup some code - Phytec MX8M : EEProm detection, fixes - Gateworks Boards improvements
2023-10-16imx93_evk: defconfig: enable clock driverSébastien Szymanski1-2/+0
Add clocks nodes in u-boot.dtsi file. Remove init_uart_clk() call. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2023-10-16cmd: Convert existing long help messages to the new macroTom Rini2-11/+5
- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines and use U_BOOT_LONGHELP to declare the same variable name as before - In a few places, either rename the variable to follow convention or introduce the variable as it was being done inline before. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-10-16freescale: fix long help handling in mac commandHeinrich Schuchardt1-6/+12
CONFIG_SYS_LONGHELP=n we want to reduce the size of the U-Boot binary. The long text should be reduced to and empty string in this case. There is not need to call cmd_usage() directly. It is sufficient to return CMD_RET_USAGE. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-10-16cmd: move mac commandHeinrich Schuchardt1-0/+22
Board specific implementations of the 'mac' command differ concerning the supported sub-commands. Move the Freescale specific mac command definition to the board code. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-10-10board: freescale: ls1088a: declare MC reserved regionsLaurentiu Tudor1-0/+1
Populate the device tree with the MC reserved memory regions. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-10-10board: freescale: ls2080a: declare MC reserved regionsLaurentiu Tudor2-0/+2
Populate the device tree with the MC reserved memory regions. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-10-10drivers: net: fsl-mc: add support for MC reserved memoryLaurentiu Tudor1-0/+1
Add support for declaring in device tree the reserved memory ranges required for MC. Since the MC firmware acts as any DMA master present in the SoC, the reserved memory ranges need also be identity mapped in the SMMU, so create the required 'iommu-addresses' property in the reserved memory nodes. For now this support is used only on LX2160A SoCs. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-10-10fsl-layerscape: drop obsolete PPA secure firmware supportLaurentiu Tudor22-223/+0
PPA was a secure firmware developed in-house which is no longer supported and replaced by TF-A quite some years ago. Drop support for it. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-08-31freescale: Drop call to init_func_vid() in the init sequenceSimon Glass2-1/+4
Use the misc_init_f event instead, which is designed for this purpose. All boards with CONFIG_VID already enable CONFIG_EVENT. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-09treewide: rework linker symbol declarations in sections headerShiji Yang15-0/+15
1. Convert all linker symbols to char[] type so that we can get the corresponding address by calling array name 'var' or its address '&var'. In this way, we can avoid some potential issues[1]. 2. Remove unused symbol '_TEXT_BASE'. It has been abandoned and has not been referenced by any source code. 3. Move '__data_end' to the arch x86's own sections header as it's only used by x86 arch. 4. Remove some duplicate declared linker symbols. Now we use the standard header file to declare them. [1] This patch fixes the boot failure on MIPS target. Error log: SPL: Image overlaps SPL Fixes: 1b8a1be1a1f1 ("spl: spl_legacy: Fix spl_end address") Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-08-03board/freescale: Drop two orphaned entriesTom Rini2-10/+0
As the defconfig files here have been removed we can also remove the entries. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-03freescale: Remove Rajesh Bhagat MAINTAINERSSean Anderson11-13/+1
Rajesh's email bounces. Remove his email from all boards he maintains. Fortunately, he has co-maintainers on most boards. I have taken the liberty of volunteering Pramod to maintain the LS1012AFRDM, since he also maintains the LS1012AFRWY. Let me know if the board should be orphaned instead. Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2023-07-25board: m68k add missing maintainerAngelo Dureghello5-5/+5
Add myself as a maintainer for orphaned boards. All these boards are covered by buildman m68k test. Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
2023-07-25MAINTAINERS: Add some missing directories or filesTom Rini1-1/+0
In a few cases we have MAINTAINERS entries that are missing obvious paths or files. Typically this means a board directory that did not list itself, but in a few cases we have a Kconfig file or similar. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-07-25MAINTAINERS: Correct minor mistakes on some file listingsTom Rini1-1/+1
There are a few entries where minor mistakes mean that we don't match up with obviously expected files, correct those. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-07-19Merge tag 'fsl-qoriq-2023-7-13' of ↵WIP/19Jul2023Tom Rini4-2/+46
https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq Enable DM_SERIAL for T2080RDB, T4240RDB, T1042D4RDB, T1024RDB
2023-07-13mx7dsabresd: Retrieve the second MAC address from fusesFabio Estevam1-0/+6
Currently, a random MAC address is assigned to eth1 in Linux. Fix this behavor by retrieving the second MAC address from the fuses. Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-07-13imx: imx8ulp: start the ELE RNG at bootPeng Fan1-0/+10
On the imx8ulp A1 SoC, the ELE RNG needs to be manually started. Signed-off-by: Clement Faure <clement.faure@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-07-13imx: use generic name ele(EdgeLockSecure Enclave)Peng Fan2-6/+5
Per NXP requirement, we rename all the NXP EdgeLock Secure Enclave code including comment, folder and API name to ELE to align. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-07-13board: freescale: t102xrdb: implement get_serial_clockCamelia Groza1-1/+9
The serial clock is provided by the get_serial_clock() callback on PPC under DM_SERIAL. Use the same method to compute the clock as for non-DM_SERIAL use cases. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-07-13board: freescale: t102xrdb: enumerate PCI devicesCamelia Groza1-0/+2
Call pci_init() to force PCI enumeration at probe time. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
generated by cgit v1.1 at 2024-07-19 02:47:03 +0000