aboutsummaryrefslogtreecommitdiff
path: root/board/beacon
AgeCommit message (Collapse)AuthorFilesLines
2022-01-22arm: rmobile: rzg2_beacon: Migrate reset to SYSRESET_PSCIAdam Ford1-10/+0
Instead of a custom cpu_reset function, use the sysreset_psci instead to reduce redundant code clutter. Signed-off-by: Adam Ford <aford173@gmail.com>
2022-01-07imx8mn_beacon: Fix booting hang and switch to binmanAdam Ford2-1/+11
Somewhere along the line, the board stopped being able to boot. Rather than just fixing the issue, let's fix the issue and migrate to binman to eliminate a warning when using custom imx tools for generating the binary. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07imx8mm_beacon: Switch to binman for generating imageAdam Ford3-4/+13
To eliminate a warning when using custom imx tools for generating a binary, use binman to generate flash.bin. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-12-13arm: dts: Create common rz-g2-beacon-u-boot fileAdam Ford1-0/+10
The rzg2_beacon_defconfig creates an image for RZ/G2[MNH] and as such creates three different device trees and each of them have a corresponding -u-boot.dtsi file which are basically copies of each other. Create a common include file to be referenced by each of the respective board-u-boot.dtsi files to reduce duplicate code and simplify support going forward. This also restores some lost functionality from the device tree re-sync and updates the MAINTAINER file to include all beacon-renesom device tree files. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-30ARM: rmobile: Rename r8a774a1_beacon_defconfig to rzg2_beacon_defconfigAdam Ford1-3/+1
Now that the three M/N/H variants can be built from one config, rename the defconfig file to be more generic since it supports multiple RZ/G2. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-29ARM: rmobile: Beacon: Remove dead codeAdam Ford1-10/+0
There are a few do-nothing functions that can be removed. Remove them. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-29ARM: rmobile: beacon: Remove duplicated for RZ/G2 M/N/HAdam Ford1-1/+1
Now that TARGET_BEACON_RZG2M can handle all the work that was done with TARGET_BEACON_RZG2N and TARGET_BEACON_RZG2H, remove them since they just create more duplicate code. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-29ARM: rmobile: Enable board detection when FIT is enabledAdam Ford1-0/+16
There are three boards from Beacon, RZ/G2 M/N/H which all use the same board file, but different device trees. Add code to automatically select the proper device tree based on the CPU type. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-09-30WS cleanup: remove trailing empty linesWolfgang Denk2-2/+0
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-08-31Kconfig: Remove all default n/no optionsMichal Simek1-2/+0
default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31imx: Finish migration of IMX_CONFIG to KconfigTom Rini2-0/+6
- Provide a default Kconfig value of the default script - Largely continue to define this via the board Kconfig file - For the boards that select a script based on defconfig rather than TARGET, keep this within the defconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-12ARM: rmobile: Add missing rcar-common/common.c to Beacon RZG2M kitMarek Vasut2-16/+1
The rcar-common/common.c contains various common board functions shared by all R-Car and RZG boards. This board is not compiling the file in, so add it. This way, part of the board code can be de-duplicated too. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Adam Ford <aford173@gmail.com>
2021-03-15Merge tag 'v2021.04-rc4' into nextTom Rini4-2/+1450
Prepare v2021.04-rc4
2021-03-02reset: Remove addr parameter from reset_cpu()Harald Seiler1-1/+1
Historically, the reset_cpu() function had an `addr` parameter which was meant to pass in an address of the reset vector location, where the CPU should reset to. This feature is no longer used anywhere in U-Boot as all reset_cpu() implementations now ignore the passed value. Generic code has been added which always calls reset_cpu() with `0` which means this feature can no longer be used easily anyway. Over time, many implementations seem to have "misunderstood" the existence of this parameter as a way to customize/parameterize the reset (e.g. COLD vs WARM resets). As this is not properly supported, the code will almost always not do what it is intended to (because all call-sites just call reset_cpu() with 0). To avoid confusion and to clean up the codebase from unused left-overs of the past, remove the `addr` parameter entirely. Code which intends to support different kinds of resets should be rewritten as a sysreset driver instead. This transformation was done with the following coccinelle patch: @@ expression argvalue; @@ - reset_cpu(argvalue) + reset_cpu() @@ identifier argname; type argtype; @@ - reset_cpu(argtype argname) + reset_cpu(void) { ... } Signed-off-by: Harald Seiler <hws@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-01imx: Add 2GB lpddr support for i.MX8MN Beacon EmbeddedWorks devkit.Adam Ford4-2/+1450
There is a second lpddr configuration with 2GB of RAM, but this requires different RAM timings, so in addition to adding the timing file, a separate defconfig is necessary. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-02-15Merge branch '2021-02-02-drop-asm_global_data-when-unused'Tom Rini5-0/+5
- Merge the patch to take <asm/global_data.h> out of <common.h>
2021-02-07ARM: rmobile: Add Beacon EmbeddedWorks RZG2H Dev KitAdam Ford2-1/+2
The Beacon EmbeddedWorks kit is based on the R8A774E1 SoC also known as the RZ/G2H. The kit consists of a SOM + Baseboard and supports microSD, eMMC, Ethernet, a couple celular radios, two CAN interfaces, Bluetooth and WiFi. It shares much of the same design as the RZ/G2M and RZ/G2N dev kits. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-02-07ARM: rmobile: Add Beacon EmbeddedWorks RZG2N Dev KitAdam Ford2-1/+2
The Beacon EmbeddedWorks kit is based on the R8A774B1 SoC also known as the RZ/G2N. The kit consists of a SOM + Baseboard and supports microSD, eMMC, Ethernet, a couple celular radios, two CAN interfaces, Bluetooth and WiFi. It shares much of the same design as the RZ/G2M dev kit. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass5-0/+5
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-23imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit.Adam Ford7-0/+1694
Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-07-25ARM: rmobile: Add Beacon EmbeddedWorks RZG2M Dev KitAdam Ford4-0/+82
The Beacon EmbeddedWorks kit is based on the R8A774A1 SoC also known as the RZ/G2M. The kit consists of a SOM + Baseboard and supports microSD, eMMC, Ethernet, a couple celular radios, two CAN interfaces, Bluetooth and WiFi. Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-14imx8m: Refactor the OPTEE memory removalPeng Fan1-11/+0
Current codes assume the OPTEE address is at the end of first DRAM bank. Adjust the process to allow OPTEE in the middle of first bank. When OPTEE memory is removed from first bank, it may split the first bank to two banks, adjust the MMU table for the split case, Since the default CONFIG_NR_DRAM_BANKS is 4, it is enough, just enlarge i.MX8MP evk to default to avoid issue. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Silvano di Ninno <silvano.dininno@nxp.com> Tested-by: Silvano di Ninno <silvano.dininno@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-06-02imx: Remove ARCH= references from documentationTom Rini1-1/+1
When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. Cc: Adam Ford <aford173@gmail.com> Cc: Vanessa Maegima <vanessa.maegima@nxp.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-18common: Drop log.h from common headerSimon Glass1-0/+1
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop init.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-10imx: Add support for i.MX8MM Beacon EmbeddedWorks devkit.Adam Ford7-0/+2273
Beacon EmbeddedWorks, formerly known as Logic PD, is releasing a devkit based on the i.MX8M Mini SoC consisting of baseboard + SOM. It supports eMMC on the SOM, microSD on the baseboard, various GPIO, the PINCTRL, and UART. Signed-off-by: Adam Ford <aford173@gmail.com>
generated by cgit v1.1 at 2024-08-14 11:40:34 +0000