aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2015-05-04sunxi: usbc: Fix vbus gpio handling to work with the driver-modelHans de Goede1-10/+11
The driver-model gpio functions may return another value then -1 as error, make the sunxi usbc properly handle this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-04sunxi: Add basic A33 basic supportVishnu Patekar3-0/+12
Enable full support for the A33 SoC including display, otg-usb, etc. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-04sunxi: Add a33 dram init codeVishnu Patekar3-0/+544
Based on Allwinner dram init code from the a33 bsp: https://github.com/allwinner-zh/bootloader/blob/master/basic_loader/bsp/bsp_for_a33/init_dram/mctl_hal.c Initial u-boot port by Vishnu Patekar, major cleanup / rewrite by Hans de Goede. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-04sunxi: Add support for A33 PLL11 (second DRAM pll)Hans de Goede2-3/+46
Add support for the new second DRAM PLL found on the A33 SoC. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-04sunxi: s/sun8i/sun8i_a23/Hans de Goede6-6/+6
This is a preparation patch for adding A33 support, which will have a mach name of sun8i-a33. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-04sunxi: Introduce a hidden SUNXI_GEN_SUNxI Kconfig boolHans de Goede5-11/+13
sun6i and newer (derived) SoCs such as the sun8i-a23, sun8i-a33 and sun9i have a various things in common, like having separate ahb reset control registers, the SID living inside the pmic, custom pmic busses, new style watchdog, etc. This commit introduces a new hidden SUNXI_GEN_SUN6I Kconfig bool which can be used to check for these features avoiding the need for an ever growing list of "#if defined CONFIG_MACH_SUN?I" conditionals as we add support for more "new style" sunxi SoCs. Note that this commit changes the behavior of the gmac and hdmi code for sun8i and the upcoming sun9i devices. This does not matter as sun8i does not have gmac nor hdmi, and sun9i has new hardware-blocks for these so the old code will not work there. Also this is intentional as if a sun8i / sun9i variant which does use the old hwblocks shows up then the GEN_SUN6I code paths will be the right ones to use. For completeness this also adds a SUNXI_GEN_SUN4I bool for A10/A13/A20. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-04sunxi: usbc: Remove unused irq fieldHans de Goede1-16/+0
We do not use irqs in u-boot so remove the unused irq field, and all the #ifdef-ery around the irq initialization. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-04sunxi: Also set Auxiliary Ctl SMP bit in SPLHans de Goede1-2/+3
There is no reason not to and this make the #ifdef-ery easier to read. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-02sun7i: Remove duplicate call to psci_arch_initJan Kiszka1-1/+0
This is already invoked a few cycles later in monitor mode by _secure_monitor (_sunxi_cpu_entry calls _do_nonsec_entry which triggers _secure_monitor via smc #0). Drop it here, it serves no purpose. CC: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-04-29Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblazeTom Rini28-28/+594
2015-04-29ARM: zynq: rename CONFIG_ZYNQ to CONFIG_ARCH_ZYNQMasahiro Yamada4-4/+4
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29ARM: zynq: move SoC headers to mach-zynq/include/machMasahiro Yamada4-0/+0
Move arch/arm/include/asm/arch-zynq/* -> arch/arm/mach-zynq/include/mach/* Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29ARM: zynq: move SoC sources to mach-zynqMasahiro Yamada14-2/+2
Move arch/arm/cpu/armv7/zynq/* -> arch/arm/mach-zynq/* Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29ARM: zynq: pass "-mfpu=neon" only to lowlevel_init.SMasahiro Yamada2-7/+1
The comment line in arch/arm/cpu/armv7/zynq/config.mk says that the option "-mfpu=neon" is necessary for compiling lowlevel_init.S. We do not have to give it to all the source files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29zynqmp: Enable SDHCI0 optionsMichal Simek1-0/+12
Enable SDHCI0 for zynqmp. Add empty gpio.h because of sdhci requirement. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29zynqmp: Add SPI driver support for ZynqMPSiva Durga Prasad Paladugu1-0/+3
Added the SPI driver support for ZynqMP The controller is same as zynq SPI controller Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2015-04-29zynqmp: i2c: Enable i2c driver for zynqMPSiva Durga Prasad Paladugu1-0/+3
Enable the i2c driver for ZynqMP Also enable the eeprom for read and writes to eeprom on ZynqMP ZynqMP uses the same i2c controller as in Zynq Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29zynqmp: Add support for EMMC bootmodeMichal Simek1-1/+2
Add support for EMMC bootmode. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29zynqmp: Add support for emulation platform - VeloceMichal Simek3-0/+6
Add support for Veloce - zynqmp emulation platform. Platform doesn't support SDHCI. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29zynq: timer: Fix wrong timer calculationSiva Durga Prasad Paladugu1-1/+3
Fix wrong timer calculation in get_timer_masked incase of overflow. This fixes the issue of getting wrong time from get_timer() calls. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29zynqmp: Add support for R5 sw loadingMichal Simek3-3/+283
Add support for loading sw for R5 with enabling for zynqmp. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2015-04-29zynqmp: caches: Enable dcache for zynqmpSiva Durga Prasad Paladugu1-0/+164
Define the mmu table till 2MB granularity enable dcaches for zynqmp. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29zynq: slcr: Disable all level shiftersSiva Durga Prasad Paladugu1-0/+7
Disable all level shifters before enabling the PS-to-PL level shifters as it would be good to disable all level shifters before enabling the PS-to-PL in order to ensure that it is in proper state Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29ARM: zynq: drop legacy ps7_init.c/h supportMasahiro Yamada1-1/+1
We are about to change the location for ps7_init files, breaking the current work-flows. It is good time to drop the legacy ps7_init.c/h support. Going forward, please use ps7_init_gpl.c/h all the time. If you are still using old Xilinx tools that are only able to generate ps7_init.c/h, rename them into ps7_init_gpl.c/h. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Suggested-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29zynq: Add Zynq PicoZed board supportNathan Rossi3-0/+28
The PicoZed is a System-on-Module board which is marketed as part of the ZedBoard/MicroZed/etc. collection. It includes a Zynq-7000 processor. This patch adds support that covers all the variants of the PicoZed including the SKUs with Z7010/Z7020 and Z7015/Z7030 Zynq chips. This patch set however only covers support for the System-on-Module and does not cover any extra components that are available on carrier boards (except those that are fanned out of the module itself). More information on this board, its variants and available carrier boards is available at: http://zedboard.org/product/picozed Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29gpio: add Xilinx Zynq PS GPIO driverAndrea Scian1-0/+66
Most of the code is taken (and adapted) from Linux kernel driver. Just add CONFIG_ZYNQ_GPIO to you config to enable it Signed-off-by: Andrea Scian <andrea.scian@dave.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-28Merge branch 'master' of git://www.denx.de/git/u-boot-socfpgaTom Rini11-47/+169
2015-04-28Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini4-24/+19
2015-04-27socfpga: implement arria V socdk SPI flash config in dtsPavel Machek1-0/+24
Arria V SocDK has same QSPI and SPI flash configuration as Socrates. Add support for it. Signed-off-by: Pavel Machek <pavel@denx.de>
2015-04-24Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2-7/+8
2015-04-24Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini28-316/+956
2015-04-24MIPS: implement device-tree handover to Linux kernelDaniel Schwierzeck2-7/+8
Add device-tree handover to Linux kernel conforming with MIPS UHI [1]. Register $a0 will be set to the reserved value -2. The address of the device-tree blob will be stored as KSEG0 address in $a1. $a2 and $a3 are set to zero. [1] http://prplfoundation.org/wiki/MIPS_documentation Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2015-04-24socfpga: implement socdk SPI flash config in dtsPavel Machek1-0/+24
SocDK has same QSPI and SPI flash configuration as Socrates. Add support for it. Signed-off-by: Pavel Machek <pavel@denx.de>
2015-04-23armv8/fsl-lsch3: Implement workaround for I2C erratum A009203York Sun1-0/+34
This erratum requires setting GLITCH_EN bit in debug register to enable digital filter to improve clock stability. Signed-off-by: York Sun <yorksun@freescale.com> CC: Heiko Schocher <hs@denx.de>
2015-04-23ls2085a: esdhc: Add esdhc support for ls2085aYangbo Lu3-0/+19
This patch adds esdhc support for ls2085a. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
2015-04-23armv8/ls2085ardb: Enable NAND SPL supportScott Wood2-0/+14
Enable NAND boot support using SPL framework. To boot from NAND, either use DIP switches on board, or "qixis_reset nand" command. Details of forming NAND image can be found in README. Signed-off-by: Scott Wood <scottwood@freescale.com> [York Sun: Remove +S from defconfig after commit 252ed872] Signed-off-by: York Sun <yorksun@freescale.com>
2015-04-23armv8/ls2085aqds: NAND boot supportScott Wood6-0/+180
This adds NAND boot support for LS2085AQDS, using SPL framework. Details of forming NAND image can be found in README. Signed-off-by: Scott Wood <scottwood@freescale.com> [York Sun: Remove +S from defconfig after commit 252ed872] Signed-off-by: York Sun <yorksun@freescale.com>
2015-04-23driver/ifc: Add 64KB page supportJaiprakash Singh4-10/+10
IFC has two register pages.Till IFC version 1.4 each register page is 4KB each.But IFC ver 2.0 register page size is 64KB each.IFC regiters structure is break into two viz FCM and RUNTIME.FCM(Flash control machine) registers are defined in PAGE0 and controls IFC generic functionality. RUNTIME registers are defined in PAGE1 and controls NAND and GPCM funcinality. FCM and RUNTIME structures defination is common for IFC version 1.4 and 2.0. Signed-off-by: Jaiprakash Singh <b44839@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
2015-04-23Merge branch 'master' of git://git.denx.de/u-boot-dmTom Rini9-0/+63
2015-04-23usb: host: Add ehci-vf USB driver for ARM Vybrid SoC'sSanchayan Maity3-0/+40
This driver adds support for the USB peripheral on Freescale Vybrid SoC's. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
2015-04-23ARM: vf610: Initial integration for Colibri VF50/VF61Sanchayan Maity2-0/+10
This adds initial support for Colibri VF50/VF61 based on Freescale Vybrid SoC. - CPU clocked at 396/500 MHz - DDR3 at 396MHz - for VF50, use PLL2 as memory clock (synchronous mode) - for VF61, use PLL1 as memory clock (asynchronous mode) - Console on UART0 (Colibri UART_A) - Ethernet on FEC1 - PLL5 based RMII clocking (E.g. No external crystal) - UART_A and UART_C I/O muxing - Boot from NAND by default Tested on Colibri VF50/VF61 booting using serial loader over UART. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Acked-by: Stefan Agner <stefan@agner.ch>
2015-04-23ARM: vf610: Enable cachesStefan Agner1-0/+16
Enables caches which provides a rather huge speedup of the boot loader. Also mark the on-chip RAM as cachable since this is the area U-Boot runs from. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
2015-04-23ARM: vf610: Add SoC and CPU type detectionSanchayan Maity2-2/+39
Vybrid product family consists of several rather similar SoC which can be determined by softare during boot time. This allows use of variable ${soc} for Linux device tree files. Detect VF5xx CPU's by reading the CPU count register. We can determine the second number of the CPU type (VF6x0) which indicates the presence of a L2 cache. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
2015-04-23ARM: vf610: Enable external 32KHz oscillatorStefan Agner2-1/+11
Enable the SCSC (Slow Clock Source Controller) and select the external 32KHz oscillator. This improves the accuracy of the RTC. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
2015-04-23ARM: vf610: Move DDR3 initialization to imx-commonSanchayan Maity4-2/+355
In order to avoid code duplication, move the DDR3 initialization to the common place under imx-common. Currently ROW_DIFF and COL_DIFF can be chosen from the board file. The JEDEC timings are specified using a common ddr3_jedec_timings structure. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
2015-04-23arm: am437x: mux: Update mux namesBryan De Faria1-31/+56
Correct and complete the mux names following AM437x Technical Reference Manual. Signed-off-by: Bryan De Faria <bdefaria-ext@adeneo-embedded.com>
2015-04-23m68k: add architecture-specific u-boot.ldsangelo@sysam.it1-0/+91
Add architecture-specific u-boot.lds and remove all board-specific u-boot.lds. All the .text customization that was board-specific have been moved inside the related include/configs, inside a LDS_BOARD_TEXT define. Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2015-04-23fastboot: ARM: OMAP5: Enable reboot-bootloaderDileep Katta1-0/+10
Implemented fb_set_reboot_flag() for OMAP5 to set an environment variable 'dofastboot' when reboot-bootloader called. This environment variable will be checked in boot command and fastboot will be called if the variable is set. If the bootcmd env variable of OMAP5 common is overwritten with board-specific command, then these changes will not apply. This was originally intended for DRA7 platform, but now applies to all OMAP5. Ref: http://git.omapzoom.org/?p=repo/u-boot.git;a=commit;h=19da2e436e9806259cf1f4988b9e046ab256bf2c Signed-off-by: Angela Stegmaier <angelabaker@ti.com> Signed-off-by: Dileep Katta <dileep.katta@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Make it check for !CONFIG_ENV_IS_NOWHERE as we can't saveenv() in that case] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-04-23ARM: DRA7: Set serial number environment variableDileep Katta3-0/+22
This patch populates serial number environment variable from die_id_0 and die_id_1 register values for DRA7xx boards. The function is added in omap common code so that this can be re-used. Serial# environment variable will be useful to show correct information in "fastboot devices" commands. Ref: http://git.omapzoom.org/?p=repo/u-boot.git;a=commit;h=a6bcaaf67f6e4bcd97808f53d0ceb4b0c04d583c Signed-off-by: Angela Stegmaier <angelabaker@ti.com> Signed-off-by: Dileep Katta <dileep.katta@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-04-23davinci: add support for omapl138-lcdk boardPeter Howard2-0/+5
Signed-off-by: Peter Howard <phoward@gme.net.au> [trini: Add config file, update for ..._ether_addr() -> ..._ethaddr() rename] Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.1 at 2024-07-16 02:50:18 +0000