aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2021-10-31board: samsung: add support for Galaxy A series of 2017 (a5y17lte)Dzmitry Sankouski3-0/+60
Samsung Galaxy A3, A5, A7 (2017) - middle class Samsung smartphones. U-boot can be used as chain-loaded bootloader to gain control on booting vanilla linux(and possibly others) kernels Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
2021-10-31SoC: exynos: add support for exynos 78x0Dzmitry Sankouski4-0/+648
Samsung Exynos 7880 \ 7870 - SoC for mainstream smartphones and tablets introduced on March 2017. Features: - 8 Cortex A53 cores - ARM Mali-T830 MP3 GPU - LTE Cat. 7 (7880) or 6 (7870) modem Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
2021-10-31board: samsung: add Samsung Galaxy S9/S9+(SM-G96x0) boardDzmitry Sankouski4-0/+110
Samsung S9 SM-G9600 - Snapdragon SDM845 version of the phone, for China \ Hong Kong markets. Has unlockable bootloader, unlike SM-G960U (American market version), which allows running u-boot as a chain-loaded bootloader. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-10-31SoC: qcom: add support for SDM845Dzmitry Sankouski6-0/+279
Hi-end qualcomm chip, introduced in late 2017. Mostly used in flagship phones and tablets of 2018. Features: - arm64 arch - total of 8 Kryo 385 Gold / Silver cores - Hexagon 685 DSP - Adreno 630 GPU Tested only as second-stage bootloader. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: Stephan Gerhold <stephan@gerhold.net>
2021-10-31clocks: qcom: add clocks for SDM845 debug uartDzmitry Sankouski3-1/+95
Allows to change clock frequency of debug uart, thus supporting wide range of baudrates. Enable / disable functionality is not implemented yet. In most use cases of SDM845 (i.e. mobile phones and tablets) it's not needed, because qualcomm first stage bootloader leaves it initialized, and on the other hand there's no possibility to replace signed first stage bootloader with u-boot. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-10-31pinctrl: qcom: add pinctrl and gpio drivers for SDM845 SoCDzmitry Sankouski3-0/+48
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Stephan Gerhold <stephan@gerhold.net> [trini: Add CONFIG_SDM845 around sdm845_data usage]
2021-10-31arm: dts: apple: Add preliminary device treesMark Kettenis4-0/+796
Add preliminary device trees for the Apple M1 mini (2020) and Apple M1 Macbook Pro 13" (2020). Device tree bindings for the Apple M1 SoC are still being formalized and these device trees will be synchronized with the Linux kernel as needed. The device trees in this commit are based on the initial Apple M1 device trees from Linux 5.13, nodes for dart, pcie, pinctrl, pmgr, usb based on bindings on track for inclusion in Linux 5.15 and 5.16 and nodes for i2c, mailbox, nvme, pmu, spmi and watchdog that don't have a proposed binding yet. These device trees are provided as a reference only as U-Boot uses the device tree passed by the m1n1 bootloader. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31iommu: Add Apple DART driverMark Kettenis1-0/+1
The DART is an IOMMU that is used on Apple's M1 SoC. This driver configures the DART such that it operates in bypass mode which is enough to support DMA for the USB3 ports integrated on the SoC. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31serial: s5p: Add Apple M1 supportMark Kettenis2-0/+42
Apple M1 SoCs include an S5L UART which is a variant of the S5P UART. Add support for this variant and enable it by default on Apple SoCs. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31arm: apple: Add initial support for Apple's M1 SoCMark Kettenis6-0/+223
Add support for Apple's M1 SoC that is used in "Apple Silicon" Macs. This builds a basic U-Boot that can be used as a payload for the m1n1 boot loader being developed by the Asahi Linux project. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Add MAINTAINERS entry]
2021-10-31test: Add tests for IOMMU uclassMark Kettenis1-0/+6
Add a set of tests for the IOMMU uclass. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31arm: mvebu: Fix booting from SATAPali Rohár1-2/+2
Use proper SATA macro for boot_device switch in spl_boot_device() function. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: 2226ca173486 ("arm: mvebu: Load U-Boot proper binary in SPL code based on kwbimage header")
2021-10-31Revert "arch: arm: use dt and UCLASS_SYSCON to get gic lpi details"Michael Walle4-63/+36
Stop using the device tree as a source for ad-hoc information. This reverts commit 2ae7adc659f7fca9ea65df4318e5bca2b8274310. Signed-off-by: Michael Walle <michael@walle.cc> [trini: Also make board/broadcom/bcmns3/ns3.c fail clearly now] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-30Revert "arm64: Layerscape: Survive LPI one-way reset workaround"Tom Rini5-41/+1
Ad-hoc bindings that are not part of the upstream device tree / bindings are not allowed in-tree. Only bindings that are in-progress with upstream and then re-synced once agreed upon are. This reverts commit af288cb291da3abef6be0875527729296f7de7a0. Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Reported-by: Michael Walle <michael@walle.cc> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Marc Zyngier <maz@kernel.org>
2021-10-28Merge https://source.denx.de/u-boot/custodians/u-boot-marvellWIP/28Oct2021Tom Rini3-3/+12
- mvebu: Fix usage of BIN header arguments (Pali) - mvebu: turris_omnia: Fix MTD partitions order for Linux (Pali) - mvebu: nandpagesize support for kwbimage v1 (Pali)
2021-10-28arm: mvebu: Fix comments about kwbimage structuresPali Rohár1-1/+1
kwbimage v1 is used on more SoCs. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28arm: mvebu: Update name of kwbimage v1 field at offset 0x2-0x3Pali Rohár1-1/+1
At this offset is stored nand page size. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28arm: mvebu: Remove dummy BIN header arguments for SPL binaryPali Rohár1-1/+1
U-Boot SPL binary does not read BIN header arguments, so passing some dummy values 0000005b and 00000068 has no effect for U-Boot SPL code. Probably these two values comes from old Marvell DDR training code which was separated from U-Boot and used it for some configuration. Seems that two 32-bit values were specified here to ensure SPL code alignment to 128-bit boundary as it is required e.g. for A370 or AXP processors. Main kwbimage header is 64-byte long which is aligned to 128-bit boundary. Optional kwbheader is 32-bit long, number of BIN header arguments is stored in 32-bit number. So for alignment to 128-bit boundary is needed 64-bit padding which exactly these two 32-bit dummy arguments provided. Now when mkimage correctly aligns start of executable code in BIN header to 128-bit boundary, there is no requirement to put dummy argument values into kwbimage. So remove them. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28arm: mvebu: Add documentation for save_boot_params() functionPali Rohár1-0/+9
Important detail is availability of kwbimage BIN header arguments passed via r0 and r1 registers by BootROM. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-27sandbox: Remove OF_HOSTFILEWIP/27Oct2021Ilias Apalodimas3-19/+19
OF_HOSTFILE is used on sandbox configs only. Although it's pretty unique and not causing any confusions, we are better of having simpler config options for the DTB. So let's replace that with the existing OF_BOARD. U-Boot would then have only three config options for the DTB origin. - OF_SEPARATE, build separately from U-Boot - OF_BOARD, board specific way of providing the DTB - OF_EMBED embedded in the u-boot binary(should not be used in production Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-25arm: spl: prepare for jumping to OPTEERicardo Salveti1-0/+11
Make sure to (if applicable) flush the D-cache, invalidate I-cache, and disable MMU and caches before jumping to OPTEE. This fixes the SDP->SPL->OPTEE boot flow on iMX6Q and most likely on some other ARM SoCs. Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Co-developed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2021-10-25Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiWIP/25Oct2021Tom Rini4-4/+11
- Add and enable watchdog driver - Prepare for SYSRESET driven AXP poweroff - Prepare for SoCs without MMC2 - Some fixes for extending SPL (SPL-DM for RISC-V) - Some preparations for proper VBUS management - Fix secure monitor move
2021-10-25sunxi: only include alias for eMMC when mmc2 usedIcenowy Zheng1-0/+2
Some Allwinner SoCs (e.g. R329) doesn't have a MMC2 controller at all, and on boards that we do not utilize MMC2, the alias for it is just useless. Only include the alias when we specify CONFIG_MMC_SUNXI_EXTRA_SLOT to 2. Signed-off-by: Icenowy Zheng <icenowy@sipeed.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-25sunxi: dts: H616: Enable the watchdogSamuel Holland1-1/+0
For some reason, the watchdog was disabled in the H616 device tree. Most likely this is a copy-paste from the H6 device tree: the H6 watchdog is disabled because it is broken in some chips. However, there is no evidence of issues with the H616 watchdog. Enable the watchdog node so it can be used by the driver. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-25Merge tag 'u-boot-imx-20211022' of ↵Tom Rini16-52/+508
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20211022 ------------------- CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9561 - i.MX8: - Toradex Verdin (switch to binman, cleanup, etc.) - Phytec phycore_imx8mm (fixes, boot from SPI-NOR) - fixes for imx8mp_evk - doc (i.MX): MX8MM with Fast boot - i.MX6: - Toradex : colibri-imx6ull with eMMC, fixes - i.MX7ULP : - preparation for OPTEE + Serial Number - generic: - imx8m_image: Support ddr3 firmware
2021-10-25sunxi: Enable watchdog timer support by defaultSamuel Holland1-0/+1
A watchdog helps recover from hangs or failure to boot an OS. It can also be used by the sysreset framework to intentionally reset the system. Now that a driver is available, let's enable this functionality on sunxi boards. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-25sunxi: SPL SPI: Allow larger SPLAndre Przywara1-3/+7
The more recent Allwinner SoCs BootROMs can actually load SPL images larger than 32KB. We use this on the H616 to fit the extra code needed for the PMIC into the image, and have provisions in board.c to respect that larger SPL size when booting from MMC. However the sunxi SPL SPI loader has a hardcoded load offset of 32KB, which will fail on the H616. To fix this, use the same algorithm we use for MMC: if the SPL size is smaller than 32KB, we use 32KB, otherwise we expect the U-Boot payload directly after the SPL code. This prepares for SPI booting with larger SPLs like on the H616. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2021-10-25sunxi: Select SPL_SEPARATE_BSSSamuel Holland1-0/+1
sunxi-common.h defines CONFIG_SPL_BSS_START_ADDR to put SPL's BSS in DRAM. Due to this, we must select SPL_SEPARATE_BSS, or else SPL will attempt to load its DTB from the wrong address (after BSS in DRAM). This change fixes booting with SPL_OF_CONTROL=y. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-22Merge tag 'efi-2022-01-rc1' of ↵Tom Rini7-7/+76
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-01-rc1 Documentation: Use Sphinx 3.43. Move system reset documentation to HTML UEFI: Fix linking EFI apps with LLVM Fix alignment of loaded image Correct simple network protocol test Code cleanup
2021-10-21sandbox: provide /chosen/boot-hartid propertyHeinrich Schuchardt2-1/+26
On RISC-V the sandbox must provide the /chosen/boot-hartid in the devicetree. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-10-21mx7ulp: add getting a board serial numberRicardo Salveti1-0/+23
Get Unique ID of SoC iMX7ULP, using the logic described in Fusemap (IMX7ULPRMB2_Rev0_Fusemap) attached in the i.MX 7ULP APRM [1]. [1] https://www.nxp.com/docs/en/reference-manual/IMX7ULPRMB2.pdf Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Co-developed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-10-21arm: dts: imx8mp: Delete default clocks for clock controller nodeYe Li1-0/+3
Since SPL has initialized clocks for bus and core. We don't need to set the default clocks for clock controller node. Signed-off-by: Ye Li <ye.li@nxp.com> Tested-by: Teresa Remmet <t.remmet@phytec.de> Tested-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2021-10-21arm: dts: imx8mp-evk: Enable the EQoS ethernet portYe Li2-0/+53
i.MX8MP EVK has two ethernet ports. Add relevant nodes and properties for EQoS port to the EVK DTS file. In -u-boot.dtsi, change the u-boot eqos compatible string, add PHY reset gpio and remove assigned clocks as not supported in CCF. Signed-off-by: Ye Li <ye.li@nxp.com>
2021-10-21arm: mach-imx: Allow to build mac.c for EQoS driverYe Li1-0/+1
i.MX8MP has one DWC EQoS controller, so allow to build mac.c when only this driver is enabled. Signed-off-by: Ye Li <ye.li@nxp.com>
2021-10-21arm: mach-imx: Update MAC fuse for i.MX8MPYe Li1-1/+1
i.MX8MP has two ENET controllers, have to update the function to enable loading two MAC addresses. Signed-off-by: Ye Li <ye.li@nxp.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-21Merge branch 'master' of git://git.denx.de/u-bootStefano Babic97-1609/+3787
Signed-off-by: Stefano Babic <sbabic@denx.de>
2021-10-21Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini1-1/+3
- Turris MOX and Omnia changes, mostly moving to Kconfig (Marek) - a37xx: pci: Misc smaller fixes (Pali) - cmd: tlv_eeprom: Fix building with DEBUG enabled (Sven) - termios_linux.h: Fix tcsendbreak() implementation (Pali) - mvebu: Add missing "if SPL" (Tom)
2021-10-21arm: mvebu: Add missing "if SPL"Tom Rini1-1/+1
We can only select SPL_SKIP_LOWLEVEL_INIT if SPL is enabled, otherwise we get a warning about unmet dependencies on platforms that don't use SPL. Fixes: cf47a8cf8f7e ("arm: mvebu: Select SPL_SKIP_LOWLEVEL_INIT on ARMADA_32BIT") Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21arm: mvebu: turris_omnia: Move CONFIG_SPL_DRIVERS_MISC to KconfigMarek Behún1-0/+1
Instead of declaring CONFIG_SPL_DRIVERS_MISC in board config header, select it in Kconfig. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21arm: mvebu: turris_omnia: Move SPL's SYS_MALLOC_SIMPLE to KconfigMarek Behún1-0/+1
Instead of declaring CONFIG_SYS_MALLOC_SIMPLE dependant on CONFIG_SPL_BUILD in board config header, select CONFIG_SPL_SYS_MALLOC_SIMPLE in Kconfig. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21x86: Show some EFI info with the bdinfo commandSimon Glass4-2/+41
It is useful to see some basic EFI info with the command as it forms part of the information about a board. Add a hook for this and show the table address as a start. While here, fix an invalid cast in setup_efi_info(). Note that this function is using a data structure defined by Linux so we cannot change it. Also note that ulong is used since this is the standard in U-Boot (>6k uses), despite there being quite a bit of the more verbose uintptr_t (930 uses). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-10-21x86: Create a new header for EFISimon Glass3-3/+33
The setup routines are called from zimage but don't really belong in the zimage header. Add a new EFI header to house these. Add comments so it is clear what the functions do. Note that these functions are x86-specific. The zimage business is not used on other architectures. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-10-21x86: Keep symbol information in u-boot ELF fileSimon Glass1-2/+2
At present this information is stripped when linking. It is useful to keep it around. Strip it from the .efi files instead. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-10-20Merge tag 'u-boot-imx-20211020' of ↵WIP/20Oct2021Tom Rini58-429/+2752
https://source.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20211020 ------------------- First PR from u-boot-imx for 2022.01 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9535 - new board: kontron-sl-mx8mm - imx8m: - fix secure boot - imx ESDHC: fixes - i.MX53: Support thum2, bmode and fixes for Menlo board usbarmory switch to Ethernet driver model - imx6 : - DDR calibration for Toradex boards - imx7: - Fixes - Updated gateworks boards (ventana / venice) # gpg verification failed.
2021-10-20colibri-imx6ull: add emmc variantMax Krummenacher4-32/+84
Add code to build the eMMC variant of the Colibri iMX6ULL, i.e. the 'Colibri iMX6ULL 1GB' which has a eMMC instead of the raw NAND used on other SKUs. Related-to: ELB-4056, ELB-4057 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-20imx8mm-evk: Generate a single bootable flash.bin againFabio Estevam1-1/+18
After the conversion to binman in commit 8996e6b7c6a1 ("imx8mm_evk: switch to use binman to pack images"), it is necessary to flash both flash.bin and u-boot.itb to get a bootable system. Prior to this commit, only flash.bin was needed. Such new requirement breaks existing distro mechanisms to generate the final binary because the extra u-boot.itb is now required. Generate a final flash.bin that can be used again as a single bootable binary to keep the original behavior. After this change the SPL binary is called spl.bin, which is a more descriptive name for its purpose, and can still be used standalone (for example, for secure boot purposes). Also update imx8mm_evk.rst to remove the u-boot.itb copy step. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
2021-10-20board: phytec: imx8mm-phycore: Switch to binmanTeresa Remmet2-0/+123
Use binman for image creation. Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2021-10-20board: phytec: phycore-imx8mm: Add SPI-NOR flash supportTeresa Remmet1-0/+28
Adds SPI-NOR flash support to erase, read and write in bootloader. Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2021-10-20arm: dts: phycore-imx8mm: Fix propertyTeresa Remmet1-1/+1
Fix misspelled property "stdout-path". Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2021-10-20arm: dts: phycore-imx8mm-u-boot: Add wdog pinctrl entryTeresa Remmet1-0/+4
Add missing pinctrl entry in spl. Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
generated by cgit v1.1 at 2024-08-06 02:55:46 +0000