aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/cpu/broadwell
AgeCommit message (Collapse)AuthorFilesLines
2022-03-10event: Convert arch_cpu_init_dm() to use eventsSimon Glass1-1/+3
Instead of a special function, send an event after driver model is inited and adjust the boards which use this function. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-19doc: replace @return by Return:Heinrich Schuchardt2-2/+2
Sphinx expects Return: and not @return to indicate a return value. find . -name '*.c' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; find . -name '*.h' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-13bloblist: Rename the SPL tagSimon Glass1-2/+2
Add a U_BOOT prefix to this tag since it is specific to the U-Boot project. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass9-0/+9
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-12-18dm: Avoid accessing seq directlySimon Glass1-1/+1
At present various drivers etc. access the device's 'seq' member directly. This makes it harder to change the meaning of that member. Change access to go through a function instead. The drivers/i2c/lpc32xx_i2c.c file is left unchanged for now. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename ..._platdata variables to just ..._platSimon Glass1-5/+5
Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename ofdata_to_platdata() to of_to_plat()Simon Glass2-4/+4
This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename dev_get_platdata() to dev_get_plat()Simon Glass1-3/+3
Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename 'platdata' variables to just 'plat'Simon Glass1-1/+1
We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename auto_alloc_size members to be shorterSimon Glass2-2/+2
This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-26CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always definedStefan Roese1-2/+0
Since commit 86cf1c82850f ("configs: Migrate CONFIG_NR_DRAM_BANKS") & commit 999a772d9f24 ("Kconfig: Migrate CONFIG_NR_DRAM_BANKS"), CONFIG_NR_DRAM_BANKS is always defined with a value (4 is default). It makes no sense to still carry code that is guarded with "#ifndef CONFIG_NR_DRAM_BANKS" (and similar). This patch removes all these unreferenced code paths. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-25cpu: Convert the methods to use a const udevice *Simon Glass1-2/+2
These functions should not modify the device. Convert them to const so that callers don't need to cast if they have a const udevice *. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-24Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"Tom Rini1-2/+2
This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing changes made to 56d37f1c564107e27d873181d838571b7d7860e7. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-20cpu: Convert the methods to use a const udevice *Simon Glass1-2/+2
These functions should not modify the device. Convert them to const so that callers don't need to cast if they have a const udevice *. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-17x86: Avoid #ifdef with CONFIG_HAVE_ACPI_RESUMESimon Glass1-3/+2
At present this enables a few arch-specific members of the global_data struct which are otherwise not part of the struct. As a result we have to use #ifdef in various places. The cost of always having these in the struct is small. Adjust things so that we can use compile-time code instead of #ifdefs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass5-0/+5
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass12-0/+12
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop init.h from common headerSimon Glass4-0/+4
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-15x86: Update mrccache to support multiple cachesSimon Glass1-3/+5
With Apollo Lake we need to support a normal cache, which almost never changes and a much smaller 'variable' cache which changes every time. Update the code to add a cache type, use an array for the caches and use a for loop to iterate over the caches. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-02common: Move board_get_usable_ram_top() out of common.hSimon Glass1-0/+1
Move this function into init.h which seems to be designed for this sort of thing. Also update the header to declare struct global_data so that it can be included without global_data.h being needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move checkcpu() out of common.hSimon Glass1-0/+1
This function belongs in cpu_func.h so move it over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-10-08x86: Tidy up some duplicate MSR definesSimon Glass1-3/+3
Some MSR registers are defined twice in different parts of the file. Move them together and remove the duplicates. Also drop some thermal defines which are not used. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: Add common functions for TDP and perf controlSimon Glass2-14/+2
These functions are the same on modern Intel CPUs, so use common code to set them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: return false instead of 0 in cpu_ivybridge_config_tdp_levels(); fix 'muiltiplier' and 'desgn' typos] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: Use a common bus clock for Intel CPUsSimon Glass2-3/+3
Modern Intel CPUs use a standard bus clock value of 100MHz, so put this in a common file and tidy up the copies. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: Add a common function to set CPU thermal targetSimon Glass1-19/+1
This code appears in a few places, so move it to a common file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: Use a common definition of MSR_IA32_PERF_CTLSimon Glass2-2/+2
Remove the duplicate definition as it is not needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: pci: Drop the first parameter in pci_x86_r/w_config()Simon Glass1-5/+2
This parameter is needed by the PCI driver-mode interface but is always NULL on x86. There are a number of calls to this function so it makes sense to minimise the parameters. Adjust the x86 function to omit the first parameter, and introduce stub functions to handle the conversion. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: rebase the patch against u-boot-x86/next to get it applied cleanly] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: Rename turbo ratio MSR to MSR_TURBO_RATIO_LIMITSimon Glass1-1/+1
This MSR number is used on most modern Intel processors, so drop the confusing NHM prefix (which might mean Nehalem). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: drop MSR_IVT_TURBO_RATIO_LIMIT as no code uses it] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: spl: Move broadwell-specific code out of generic x86 splSimon Glass2-0/+12
When TPL is running, broadwell needs to do different init from SPL. There is no need for this code to be in the generic x86 SPL file, so move it to arch_cpu_init(). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: Move common Intel CPU info code into a functionSimon Glass1-8/+1
Add cpu_intel_get_info() to find out the CPU info on modern Intel CPUs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: add parameter and return value descriptions] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-08x86: broadwell: Update PCH to work in TPLSimon Glass1-3/+9
The early init should only happen once. Update the probe method to deal with TPL, SPL and U-Boot proper. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-08x86: broadwell: Implement PCH_REQ_PMBASE_INFOSimon Glass1-0/+25
Implement this ioctl() to support power off. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-08x86: broadwell: Select refcode and CPU code for SPLSimon Glass1-3/+4
Allow broadwell to build for SPL and include the reference code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-08x86: broadwell: Allow booting from SPLSimon Glass2-0/+78
At present broadwell only supports booting straight into U-Boot proper. Add a separate init file to boot from SPL into U-Boot proper, and select it when SPL is in use. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-08x86: broadwell: Split CPU initSimon Glass3-673/+695
Split the CPU init into two parts - the 'full' init which happens in the first U-Boot phase, and the rest of the init that happens on subsequent stages. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-08x86: broadwell: Move init of debug UART to cpu.cSimon Glass2-11/+13
At present the debug UART is set up in sdram.c which is not the best place since it has nothing in particular to do with SDRAM. Since we want to support initing this in SPL too, move it to a common file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: added 'broadwell' tag in the commit title] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-08x86: broadwell: Allow SDRAM init from SPLSimon Glass3-94/+101
At present, for broadwell, SDRAM is always set up in U-Boot proper since the 64-bit mode (which uses SDRAM init in SPL) is not supported. Update the code to allow SDRAM init in SPL instead so that U-Boot proper can be loaded into SDRAM and run from there. This allows U-Boot to be compressed to reduce space, since it is not necessary to run it directly from flash. It could later allow us to support 64-bit U-Boot on broadwell. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-08x86: broadwell: Improve SDRAM debugging outputSimon Glass1-12/+20
Add debugging during SDRAM init so that problems are easier to diagnose. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20x86: broadwell: Add support for serial I/O devicesSimon Glass1-0/+110
Add support for initing the I2C device and ADSP on broadwell. These are needed for sound to work. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20x86: broadwell: Don't bother probing the PCH for pinctrlSimon Glass1-1/+2
At present the pinctrl probes the PCH but since it only uses it to obtain a PCI address, this is no necessary. Avoiding this fixes one of the two co-dependent loops in broadwell. This driver really should be a proper pinctrl driver, but for now it remains a syscon device. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20x86: broadwell: Add support for the ADSPSimon Glass2-0/+157
The Application Digital Signal Processor is used for sound processing with broadwell. Add a driver to support this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-11-14cpu: Add DM_FLAG_PRE_RELOC flag to various cpu driversBin Meng1-0/+1
It turns out commit c0434407b595 broke some boards which have DM CPU driver with CONFIG_DISPLAY_CPUINFO option on. These boards just fail to boot when print_cpuinfo() is called during boot. Fixes: c0434407b595 ("board_f: Use static print_cpuinfo if CONFIG_CPU is active") Reported-by: Stefan Roese <sr@denx.de> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini13-26/+13
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-12-12ata: Migrate CONFIG_SCSI_AHCI to KconfigTuomas Tynkkynen1-0/+1
And use 'imply' liberally. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-08-15env: Convert CONFIG_ENV_IS_IN... to a choiceSimon Glass1-1/+0
At present we support multiple environment drivers but there is not way to select between them at run time. Also settings related to the position and size of the environment area are global (i.e. apply to all locations). Until these limitations are removed we cannot really support more than one environment location. Adjust the location to be a choice so that only one can be selected. By default the environment is 'nowhere', meaning that the environment exists only in memory and cannot be saved. Also expand the help for the 'nowhere' option and move it to the top since it is the default. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Move all of the imply logic to default X if Y so it works again] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-01x86: Switch all boards to use DM SCSIBin Meng1-0/+1
After MMC is converted to DM, convert to use DM SCSI as well for all x86 boards and imply BLK for both MMC and SCSI drivers. CONFIG_SCSI_DEV_LIST is no longer used. Clean them up. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01x86: kconfig: Move USB to platform KconfigBin Meng1-0/+2
Like other peripheral drivers, move USB related drivers to platform Kconfig as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01x86: broadwell: kconfig: Imply platform specific driversBin Meng1-0/+6
Imply Broadwell-specific drivers in the platform Kconfig. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01x86: kconfig: Imply ENABLE_MRC_CACHE in the platform KconfigBin Meng1-0/+1
Platform knows whether MRC cache is implemented, but using it can be a choice of a specific board. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01x86: kconfig: Select ARCH_EARLY_INIT_R in the platform KconfigBin Meng2-1/+17
This is architecture-dependent early initialization hence should be put in the platform Kconfig. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-08-14 19:19:39 +0000