aboutsummaryrefslogtreecommitdiff
path: root/arch/riscv/lib
AgeCommit message (Collapse)AuthorFilesLines
2023-11-02riscv: allow resume after exceptionHeinrich Schuchardt1-0/+13
If CSRs like seed are readable by S-mode, may not be determinable by S-mode. For safe driver probing allow to resume via a longjmp after an exception. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-11-02riscv: Weakly define invalidate_icache_range()Samuel Holland1-1/+1
Some RISC-V CPUs, such as the T-HEAD XuanTie series, have a vendor-specific way to invalidate a portion of the instruction cache. Allow them to override invalidate_icache_range(). Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-10-24riscv: Remove common.h usageTom Rini15-16/+3
We can remove common.h from most cases of the code here, and only a few places need an additional header instead. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2023-10-19riscv: Add Zbb support for building U-BootYu Chien Peter Lin4-0/+279
This patch adds ISA string to the -march to generate zbb instructions for U-Boot binaries, along with optimized string functions introduced from Linux kernel. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-10-19riscv: andes: Rearrange Andes PLICSW to single-bit-per-hart strategyRandolph1-13/+11
Source hart information is not necessary in IPI, so we could use single-bit-per-hart strategy to rearrange PLICSW mapping. Bit 0 of Interrupt Pending Bits is hardwired to 0. Therefore, we use bit 1 to send IPI to hart 0, bit 2 to hart 1, ..., and so on. Signed-off-by: Randolph <randolph@andestech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-10-04riscv: bootstage: correct bootstage_report guardChanho Park1-1/+1
Below warning can be occurred when CONFIG_BOOTSTAGE and !CONFIG_SPL_BOOTSTAGE. It should be guarded by using CONFIG_IS_ENABLED for SPL build. arch/riscv/lib/bootm.c:46:9: warning: implicit declaration of function 'bootstage_report' 46 | bootstage_report(); | ^~~~~~~~~~~~~~~~ | bootstage_error Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-10-02Merge branch 'next'Tom Rini2-1/+2
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-09-24common: Drop linux/printk.h from common headerSimon Glass1-0/+1
This old patch was marked as deferred. Bring it back to life, to continue towards the removal of common.h Move this out of the common header and include it only where needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-09-05risc-v: implement DBCN write byteHeinrich Schuchardt1-0/+16
The DBCN extension provides a Console Write Byte call. Implement function sbi_dbcn_write_byte to invoke it. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-08-31event: Convert existing spy records to simpleSimon Glass1-1/+1
Very few of the existing event-spy records use the arguments they are passed. Update them to use a simple spy instead, to simplify the code. Where an adaptor function is currently used, remove it where possible. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-07-12riscv: Rename SiFive CLINT to RISC-V ALINTBin Meng2-9/+9
As the RISC-V ACLINT specification is defined to be backward compatible with the SiFive CLINT specification, we rename SiFive CLINT to RISC-V ALINT in the source tree to be future-proof. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Rick Chen <rick@andestech.com>
2023-07-12riscv: clint: Update the sifive clint ipi driver to support aclintBin Meng1-1/+20
This RISC-V ACLINT specification [1] defines a set of memory mapped devices which provide inter-processor interrupts (IPI) and timer functionalities for each HART on a multi-HART RISC-V platform. The RISC-V ACLINT specification is defined to be backward compatible with the SiFive CLINT specification, however the device tree binding is a new one. This change updates the sifive clint ipi driver to support ACLINT mswi device, by checking the per-driver data field of the ACLINT mtimer driver to determine whether a syscon based approach needs to be taken to get the base address of the ACLINT mswi device. [1] https://github.com/riscv/riscv-aclint/blob/main/riscv-aclint.adoc Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Rick Chen <rick@andestech.com>
2023-07-06riscv: andes_plicsw: Fix IPI during OpenSBI invocationYu Chien Peter Lin1-3/+22
On some AE350 boards, we need to explicitly initialize the priority registers to a non-zero value so the boot hart can instruct secondary harts to jump to OpenSBI. This patch also updates the information about PLICSW. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-03-06riscv: semihosting: replace inline assembly with assembly fileAndre Przywara2-24/+22
So far we used inline assembly to inject the actual instruction that triggers the semihosting service. While this sounds elegant, as it's really only about a few instructions, it has some serious downsides: - We need some barriers in place to force the compiler to issue writes to a data structure before issuing the trap instruction. - We need to convince the compiler to actually fill the structures that we use pointers to. - We need a memory clobber to avoid the compiler caching the data in those structures, when semihosting writes data back. - We need register arguments to make sure the function ID and the pointer land in the right registers. This is all doable, but fragile and somewhat cumbersome. Since we now have a separate function in an extra file anyway, we can do away with all the magic and just write that in an actual assembler. This is much more readable and robust. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Sean Anderson <sean.anderson@seco.com>
2023-02-10Correct SPL uses of LMBSimon Glass1-1/+1
This converts 9 usages of this option to the non-SPL form, since there is no SPL_LMB defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-01riscv: memcpy: check src and dst before copyRick Chen1-0/+2
Add src and dst address checking, if they are the same address, just return and don't copy data anymore. Signed-off-by: Rick Chen <rick@andestech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-12-29efi_loader: set IMAGE_FILE_LARGE_ADDRESS_AWAREHeinrich Schuchardt1-5/+12
For the 64bit EFI binaries that we create set the IMAGE_FILE_LARGE_ADDRESS_AWARE characteristic in the PE-COFF header to indicate that they can handle addresses above 2 GiB. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-12-08arch/riscv: add semihosting support for RISC-VKautuk Consul3-0/+51
We add RISC-V semihosting based serial console for JTAG based early debugging. The RISC-V semihosting specification is available at: https://github.com/riscv/riscv-semihosting-spec/blob/main/riscv-semihosting-spec.adoc Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Kautuk Consul <kconsul@ventanamicro.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-11-03riscv: Rename Andes PLIC to PLICSWYu Chien Peter Lin2-14/+14
As PLICSW is used to trigger the software interrupt, we should rename Andes PLIC configuration and file name to reflect the usage. This patch also updates PLMT and PLICSW compatible strings to be consistent with OpenSBI fdt driver. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com>
2022-10-20riscv: andes_plic.c: use modified IPI schemeYu Chien Peter Lin1-3/+4
The IPI scheme in OpenSBI has been updated to support 8-core AE350 platform, the plicsw configuration needs to be modified accordingly. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com>
2022-09-29dm: core: Drop ofnode_is_available()Simon Glass2-2/+2
This function is also available as ofnode_is_enabled(), so use that instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-29treewide: Drop bootm_headers_t typedefSimon Glass1-4/+4
This is not needed and we should avoid typedefs. Use the struct instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-26riscv: Introduce AVAILABLE_HARTSRick Chen2-0/+4
In SMP all harts will register themself in available_hart during start up. Then main hart will send IPI to other harts according to this variables. But this mechanism may not guarantee that all other harts can jump to next stage. When main hart is sending IPI to other hart according to available_harts, but other harts maybe still not finish the registration. Then the SMP booting will miss some harts finally. So let it become an option and it will be enabled by default. Please refer to the discussion: https://www.mail-archive.com/u-boot@lists.denx.de/msg449997.html Signed-off-by: Rick Chen <rick@andestech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-09-26spl: introduce SPL_XIP to configNikita Shubin2-2/+2
U-Boot and SPL don't necessary share the same location, so we might end with U-Boot SPL in read-only memory (XIP) and U-Boot in read-write memory. In case of non XIP boot mode, we rely on such variables as "hart_lottery" and "available_harts_lock" which we use as atomics. The problem is that CONFIG_XIP also propagate to main U-Boot, not only SPL, so we need CONFIG_SPL_XIP to distinguish SPL XIP from other XIP modes. This adds an option special for SPL to behave it in XIP manner and we don't use hart_lottery and available_harts_lock, during start proccess. Signed-off-by: Nikita Shubin <n.shubin@yadro.com> Reviewed-by: Rick Chen <rick@andestech.com>
2022-07-26zynqmp: Run board_get_usable_ram_top() only on main U-BootAshok Reddy Soma1-1/+1
With commit ce39ee28ec31 ("zynqmp: Do not place u-boot to reserved memory location"), the function board_get_usable_ram_top() is allocating MMU_SECTION_SIZE of about 2MB using lmb_alloc(). But we dont have this much memory in case of mini U-Boot. Keep these functions which use lmb under CONFIG_LMB so that they are compiled and used only when LMB is enabled. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/75e52def75f573e554a6b177a78504c128cb0c4a.1657183534.git.michal.simek@amd.com
2022-07-26arm: riscv: Remove additional ifdef from code guarded by CONFIG_IS_ENABLEDMichal Simek1-2/+0
CONFIG_OF_LIBFDT is used twice for guarding the same code. It is enough to do it once that's why remove additional ifdefs from arm and risc-v code. Fixes: 0c303f9a6628 ("image: Drop IMAGE_ENABLE_OF_LIBFDT") Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Link: https://lore.kernel.org/r/f8e3ff9124195cbd957874de9a65ef79760ef5e7.1657183634.git.michal.simek@amd.com
2022-04-06riscv: provide missing base extension functionsHeinrich Schuchardt1-0/+65
Provide library functions to read: * machine vendor ID * machine architecture ID * machine implementation ID Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2022-03-10event: Convert arch_cpu_init_dm() to use eventsSimon Glass1-1/+2
Instead of a special function, send an event after driver model is inited and adjust the boards which use this function. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-15efi_loader: fix SectionAlignment, FileAlignmentHeinrich Schuchardt3-6/+7
The alignment of sections in the EFI binaries generated by U-Boot is incorrect. According to the PE-COFF specification [1] the minimum value for FileAlignment is 512. If the value of SectionAlignment is less then the page size, it must equal FileAlignment. Let's set both values to 512 for the ARM and RISC-V architectures. [1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-15riscv: revert Complete efi header for RV32/64Heinrich Schuchardt1-10/+0
EDK II refuses to load the EFI binaries created by U-Boot. The reason is an incorrect PE-COFF header. The number of data directories does not match NumberOfRvaAndSizes. This leads to a failed consistency check in PeCoffLoaderGetPeHeader(): SizeOfOptionalHeader - HeaderWithoutDataDir) != NumberOfRvaAndSizes * sizeof(DATA_DIRECTORY)) Fixes: 9afaeec6ef8b ("riscv: Complete efi header for RV32/64") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-11-08riscv: function to retrieve SBI implementation versionHeinrich Schuchardt1-0/+19
Provide function sbi_get_impl_version() to retrieve the SBI implementation version. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-10-13fdtdec: Support reserved-memory flagsThierry Reding1-1/+1
Reserved memory nodes can have additional flags. Support reading and writing these flags to ensure that reserved memory nodes can be properly parsed and emitted. This converts support for the existing "no-map" flag to avoid extending the argument list for fdtdec_add_reserved_memory() to excessive length. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-10-13fdtdec: Support compatible string list for reserved memoryThierry Reding1-1/+1
Reserved memory nodes can have a compatible string list to identify the type of reserved memory that they represent. Support specifying an optional compatible string list when creating these nodes. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-10-08image: Drop IMAGE_ENABLE_OF_LIBFDTSimon Glass1-2/+2
Add a host Kconfig for OF_LIBFDT. With this we can use CONFIG_IS_ENABLED(OF_LIBFDT) directly in the tools build, so drop the unnecessary indirection. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-07sysreset: provide SBI based sysreset driverHeinrich Schuchardt1-0/+12
Provide sysreset driver using the SBI system reset extension. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Samuel Holland <samuel@sholland.org>
2021-10-07riscv: Fix setting no-map in reserved memory nodesSamuel Holland1-4/+1
The no-map property is wrongly skipped if a no-map reserved memory node follows one without that property. Fix this by not remembering the absence of a no-map property across loop iterations. Fixes: d4ea649f179a ("riscv: Provide a mechanism to fix DT for reserved memory") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2021-09-23lmb: riscv: Add arch_lmb_reserve()Marek Vasut1-0/+13
Add arch_lmb_reserve() implemented using arch_lmb_reserve_generic(). It is rather likely this architecture also needs to cover U-Boot with LMB before booting Linux. Reviewed-by: Rick Chen <rick@andestech.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Atish Patra <atish.patra@wdc.com> Cc: Leo <ycliang@andestech.com> Cc: Rick Chen <rick@andestech.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-09-07riscv: lib: implement enable_caches for sifive cacheZong Li2-0/+28
The enable_caches is a generic hook for architecture-implemented, we define this function to enable composable cache of sifive platforms. In sifive_cache, it invokes the generic cache_enable interface of cache uclass to execute the relative implementation in SiFive ccache driver. Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-09-07common: board_r: support enable_caches for RISC-VZong Li1-0/+4
The enable_caches is a generic hook for architecture-implemented, we leverage this function to enable caches for RISC-V Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-09-07riscv: show code leading to exceptionHeinrich Schuchardt1-0/+33
To make analyzing exceptions easier output the code that leads to it. We already do the same on the ARM platform. Here is an example: => exception ebreak Unhandled exception: Breakpoint EPC: 000000008ff5d50e RA: 000000008ff5d62c TVAL: 0000000000000000 EPC: 000000008020b50e RA: 000000008020b62c reloc adjusted Code: 2785 0693 07a0 dce3 fef6 47a5 d563 00e7 (9002) To disassemble the code we can use the decodecode script: $ echo 'Code: 2785 0693 07a0 dce3 fef6 47a5 d563 00e7 (9002)' | \ CROSS_COMPILE=riscv64-linux-gnu- scripts/decodecode Code: 2785 0693 07a0 dce3 fef6 47a5 d563 00e7 (9002) All code ======== 0: 2785 addiw a5,a5,1 2: 07a00693 li a3,122 6: fef6dce3 bge a3,a5,0xfffffffffffffffe a: 47a5 li a5,9 c: 00e7d563 bge a5,a4,0x16 10:* 9002 ebreak <-- trapping instruction ... Code starting with the faulting instruction =========================================== 0: 9002 ebreak ... As it is not always clear if the first 16 bits are at the start or in the middle of a 32bit instruction it may become necessary to strip the first u16 from the output before calling decodecode to get the correct disassembled code. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2021-08-14efi_loader: add Linux magic to RISC-V crt0Heinrich Schuchardt1-2/+5
Add the Linux magic to the EFI file header to allow running our test programs with GRUB's linux command. MajorImageVersion = 1 indicates a kernel that can consume the EFI_LOAD_FILE2_PROTOCOL. This allows to dump the GRUB provided intird with our initrddump.efi tool. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-07-21riscv: booti: do not force relocation if force_reloc is not setVitaly Wool1-1/+6
If force_reloc flag is not set and booti is called for an address ouside RAM (i. e. QSPI NOR flash), we should honor that and not try to force relocation in a bogus fashion. Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-06-17riscv: andes_plic: Fix riscv_get_ipi() maskBin Meng1-1/+3
Current logic in riscv_get_ipi() for Andes PLICSW does not look correct. The mask to test IPI pending bits for a hart should be left shifted by (8 * gd->arch.boot_hart), just the same as what is done in riscv_send_ipi(). Fixes: 8b3e97badf97 ("riscv: add functions for reading the IPI status") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Tested-by: Rick Chen <rick@andestech.com>
2021-05-19riscv: Drop USE_SPL_FIT_GENERATORBin Meng1-100/+0
Now that we have switched to binman to generate u-boot.itb for all RISC-V boards, USE_SPL_FIT_GENERATOR is no longer needed and can be dropped. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-17riscv: Fix memmove and optimise memcpy when misalignBin Meng2-142/+257
At present U-Boot SPL fails to boot on SiFive Unleashed board, due to a load address misaligned exception happens when loading the FIT image in spl_load_simple_fit(). The exception happens in memmove() which is called by fdt_splice_(). Commit 8f0dc4cfd106 introduces an assembly version of memmove but it does take misalignment into account (it checks if length is a multiple of machine word size but pointers need also be aligned). As a result it will generate misaligned load/store for the majority of cases and causes significant performance regression on hardware that traps misaligned load/store and emulate them using firmware. The current behaviour of memcpy is that it checks if both src and dest pointers are co-aligned (aka congruent modular SZ_REG). If aligned, it will copy data word-by-word after first aligning pointers to word boundary. If src and dst are not co-aligned, however, byte-wise copy will be performed. This patch was taken from the Linux kernel patch [1], which has not been applied at the time being. It fixes the memmove and optimises memcpy for misaligned cases. It will first align destination pointer to word-boundary regardless whether src and dest are co-aligned or not. If they indeed are, then wordwise copy is performed. If they are not co-aligned, then it will load two adjacent words from src and use shifts to assemble a full machine word. Some additional assembly level micro-optimisation is also performed to ensure more instructions can be compressed (e.g. prefer a0 to t6). With this patch, U-Boot boots again on SiFive Unleashed board. [1] https://patchwork.kernel.org/project/linux-riscv/patch/20210216225555.4976-1-gary@garyguo.net/ Fixes: 8f0dc4cfd106 ("riscv: assembler versions of memcpy, memmove, memset") Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-17riscv: Fix arch_fixup_fdt always failing without /chosenSean Anderson1-4/+7
If /chosen was missing, chosen_offset would never get updated with the new /chosen node. This would cause fdt_setprop_u32 to fail. This patch fixes this by setting chosen_offset. In addition, log any errors from setting boot-hartid as well. Fixes: 5370478d1c7 ("riscv: Add boot hartid to device tree") Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2021-05-17riscv: Split SiFive CLINT support between SPL and U-Boot properBin Meng1-1/+1
At present there is only one Kconfig option CONFIG_SIFIVE_CLINT to control the enabling of SiFive CLINT support in both SPL (M-mode) and U-Boot proper (S-mode). So for a typical SPL config that the SiFive CLINT driver is enabled in both SPL and U-Boot proper, that means the S-mode U-Boot tries to access the memory-mapped CLINT registers directly, instead of the normal 'rdtime' instruction. This was not a problem before, as the hardware does not forbid the access from S-mode. However this becomes an issue now with OpenSBI commit 8b569803475e ("lib: utils/sys: Add CLINT memregion in the root domain") that the SiFive CLINT register space is protected by PMP for M-mode access only. U-Boot proper does not boot any more with the latest OpenSBI, that access exceptions are fired forever from U-Boot when trying to read the timer value via the SiFive CLINT driver in U-Boot. To solve this, we need to split current SiFive CLINT support between SPL and U-Boot proper, using 2 separate Kconfig options. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2021-04-20Add support for stack-protectorJoel Peshkin1-0/+1
Add support for stack protector for UBOOT, SPL, and TPL as well as new pytest for stackprotector Signed-off-by: Joel Peshkin <joel.peshkin@broadcom.com> Adjust UEFI build flags. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-08riscv: assembler versions of memcpy, memmove, memsetHeinrich Schuchardt4-0/+289
Provide optimized versions of memcpy(), memmove(), memset() copied from the Linux kernel. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-04-08riscv: simplify longjmpHeinrich Schuchardt1-6/+2
The value returned by setjmp must be nonzero. If zero is passed as parameter it must be replaced by 1. This patch reduces the code size a bit. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
generated by cgit v1.1 at 2024-07-11 11:30:21 +0000