aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-tegra/tegra210/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2021-04-12Tegra: remove e2220-1170 boardPeter Robinson1-9/+0
It's an old bringup board with out upstream Linux or L4T support Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <twarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2020-04-02ARM: tegra: Add NVIDIA Jetson Nano Developer Kit supportTom Warren1-0/+7
The Jetson Nano Developer Kit is a Tegra X1-based development board. It is similar to Jetson TX1 but it is not pin compatible. It features 4GB of LPDDR4, a SPI NOR flash for early boot firmware and an SD card slot used for storage. HDMI 2.0 or DP 1.2 are available for display, four USB ports (3 USB 2.0 and 1 USB 3.0) can be used to attach a variety of peripherals and a PCI Ethernet controller provides onboard network connectivity. NVMe support has also been added. Env save is at the end of QSPI (4MB-8K). A 40-pin header on the board can be used to extend the capabilities and exposed interfaces of the Jetson Nano. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2019-07-10arm64: add an option to switch visibility of CONFIG_SYS_INIT_SP_BSS_OFFSETMasahiro Yamada1-3/+0
By default, CONFIG_SYS_INIT_SP_BSS_OFFSET was made invisible by not giving a prompt to it. The only way to define it is to hard-code an extra entry in SoC/board Kconfig, like arch/arm/mach-tegra/tegra{186,210}/Kconfig. Add a prompt to it in order to allow defconfig files to specify the value of CONFIG_SYS_INIT_SP_BSS_OFFSET. With this, CONFIG_SYS_INIT_SP_BSS_OFFSET would become always visible. So, we need a new bool option to turn it off by default. I move the 'default 524288' to the common place. This value is not too big, but is big enough to avoid the overwrap of DT in most platforms. If 512KB is not a suitable choice for your platform, you can change it from your defconfig or menuconfig etc. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2018-01-12ARM: tegra: use CONFIG_SYS_INIT_SP_BSS_OFFSETStephen Warren1-0/+3
Enable CONFIG_SYS_INIT_SP_BSS_OFFSET for all 64-bit Tegra boards. Place the stack/... 512KiB from the end of the U-Boot binary. This should be plenty to accommodate the current DTBs (max 64 KiB), early malloc region (6KiB), stack usage, and plenty of slack, while still not placing it too far away from the U-Boot binary. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2017-01-24Kconfig: Migrate BOARD_LATE_INIT to a selectTom Rini1-0/+4
This option should not really be user selectable. Note that on PowerPC we currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so be conditional on that. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> (for UniPhier)
2015-11-12ARM: tegra: note that p2371-2180 is Jetson TX1Stephen Warren1-5/+5
p2371-2180 is the engineering board name for the Jetson TX1 developer kit. Update Kconfig description and help text to make this obvious to everyone. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-09-16ARM: tegra: Add p2371-2180 boardStephen Warren1-0/+9
P2371-2180 is a P2180 CPU board married to a P2597 I/O board. The combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B port, Ethernet via USB3, USB3 host port, SATA, PCIe, and two GPIO expansion headers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-08-06ARM: tegra: Add p2371-0000 boardStephen Warren1-0/+9
P2371-0000 is a P2581 or P2530 CPU board married to a P2595 I/O board. The combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B port, Ethernet via USB3, USB3 host port, SATA, a GPIO expansion header, and an analog audio jack. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-08-06ARM: tegra: Add e2220-1170 boardStephen Warren1-0/+8
E2220-1170 is a Tegra210 bringup board with onboard SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B port, and sockets for various expansion modules. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-07-28T210: Add support for 64-bit T210-based P2571 boardTom Warren1-0/+7
Based on Venice2, incorporates Stephen Warren's latest P2571 pinmux table. With Thierry Reding's 64-bit build fixes, this will build and and boot in 64-bit on my P2571 (when used with a 32-bit AVP loader). Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-07-28ARM: Tegra210: Add SoC code/include files for T210Tom Warren1-0/+11
All based off of Tegra124. As a Tegra210 board is brought up, these may change a bit to match the HW more closely, but probably 90% of this is identical to T124. Note that since T210 is a 64-bit build, it has no SPL component, and hence no cpu.c for Tegra210. Signed-off-by: Tom Warren <twarren@nvidia.com>
generated by cgit v1.1 at 2024-07-15 14:16:22 +0000