aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-socfpga/include
AgeCommit message (Collapse)AuthorFilesLines
2024-03-18arch: arm: Agilex5 enablementJit Loon Lim5-7/+73
This patch is to enable Agilex5 platform for Intel product. Changes, modification and new files are created for board, dts, configs and makefile to create the base for Agilex5. Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com> Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
2024-01-11mach-socfpga: do not overlap defines with lwipMaxim Uvarov1-6/+0
Fix compilation issue with overlapping lwip and march defines. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-12-17arm: socfpga: arria10: Enable double peripheral RBF configurationTien Fong Chee1-0/+2
Double peripheral RBF configuration are needed on some devices or boards to stabilize the IO configuration system. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Sin Hui Kho <sin.hui.kho@intel.com> Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
2021-12-17arm: socfpga: arria10: Reset MPFE NoC after program periph / combined RBFTien Fong Chee3-2/+13
This patch triggers warm reset to recover the MPFE NoC from corruption due to high frequency transient clock output from HPS EMIF IOPLL at VCO startup after peripheral RBF is programmed. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Sin Hui Kho <sin.hui.kho@intel.com> Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
2021-12-17arm: socfpga: arria10: Setting image magic value to romcode initswstate regTien Fong Chee1-1/+2
The romcode_initswstate register need to be set with FSBL_IMAGE_IS_VALID value if the current FSBL image is found valid, otherwise BootROM will look for next subsequent valid FSBL image when warm reset is triggered. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Sin Hui Kho <sin.hui.kho@intel.com> Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
2021-09-30WS cleanup: remove SPACE(s) followed by TABWolfgang Denk1-8/+8
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-08-25ddr: altera: Add SDRAM driver for Intel N5X deviceTien Fong Chee2-1/+15
The DDR subsystem in Diamond Mesa is consisted of controller, PHY, memory reset manager and memory clock manager. Configuration settings of controller, PHY and memory reset manager is come from DDR handoff data in bitstream, which contain the register base addresses and user settings from tool. Configuration settings of memory clock manager is come from the HPS handoff data in bitstream, however the register base address is defined in device tree. The calibration is fully done in HPS, which requires IMEM and DMEM binaries loading to PHY SRAM for running this calibration, both IMEM and DMEM binaries are also part of bitstream, this bitstream would be loaded to OCRAM by SDM, and configured by DDR driver. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com> Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2021-08-25arm: socfpga: Add clock manager for Intel N5X deviceSiew Chin Lim2-0/+14
Add clock manager for N5X. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-08-25arm: socfpga: Move cm_get_mpu_clk_hz function declaration to clock_manager.hSiew Chin Lim5-5/+1
Move cm_get_mpu_clk_hz function declaration from individual device's clock manager header file to common clock_manager.h. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-08-24arm: socfpga: Add handoff data support for Intel N5X deviceTien Fong Chee1-5/+33
N5X support both HPS handoff data and DDR handoff data. Existing HPS handoff functions are restructured to support both existing devices and N5X device. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com> Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2021-08-24arm: socfpga: Add base address for Intel N5X deviceSiew Chin Lim1-1/+2
Reuse base_addr_soc64.h for Intel N5X device, the address is the same as Agilex. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-08-24arm: socfpga: Changed base_addr_s10.h to base_addr_soc64.hSiew Chin Lim1-4/+4
Rename to common file name to used by all SOC64 devices and change "_S10_" to "_SOC64_" in base_addr_soc64.h. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-04-08arm: socfpga: smc: Add function to get usercodeSiew Chin Lim1-0/+1
Add function to send mailbox command via SMC to get usercode from SDM. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2021-04-08arm: socfpga: Changed to store QSPI reference clock in kHzSiew Chin Lim2-1/+19
Changed to store QSPI reference clock in kHz instead of Hz in boot scratch cold0 register for Stratix10 and Agilex. This patch is in preparation for Intel N5X SDRAM driver support. Reserved 4 bits for Intel N5X SDRAM driver, and there will be 28 bits to store QSPI reference clock. Due to limited bits, QSPI reference clock frequency is converted to kHz from Hz. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com> Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2021-04-08arm: socfpga: Move Stratix10 and Agilex clock manager common codeSiew Chin Lim4-4/+1
Move duplicated function cm_get_qspi_controller_clk_hz to clock_manager.c. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com> Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2021-04-08arm: socfpga: Restructure Stratix10 and Agilex handoff codeSiew Chin Lim2-5/+22
Restructure Stratix10 and Agilex handoff code to used by all SOC64 devices, in preparation to support handoff for Diamond Mesa. Remove wrap_pinmux_config_s10.c. Add wrap_handoff_soc64.c which contains the generic function to parse the handoff data. Update system_manager_soc64.c to use generic handoff function in wrap_handoff_soc64.c. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2021-04-08arm: socfpga: Rearrange sequence of macros in handoff_soc64.hSiew Chin Lim1-10/+12
Rearrange sequence of macros in handoff_soc64.h without any functionality change. In preparation for Stratix10 and Agilex handoff function restructuring. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-04-08arm: socfpga: Rename Stratix10 and Agilex handoff common macrosSiew Chin Lim2-39/+39
Rename handoff_s10.h to handoff_soc64.h. Changed macros prefix from S10_HANDOFF to SOC64_HANDOFF. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-03-15Merge tag 'v2021.04-rc4' into nextTom Rini4-4/+66
Prepare v2021.04-rc4
2021-03-08arm: socfpga: soc64: Support Vendor Authorized Boot (VAB)Siew Chin Lim2-0/+64
Vendor Authorized Boot is a security feature for authenticating the images such as U-Boot, ARM trusted Firmware, Linux kernel, device tree blob and etc loaded from FIT. After those images are loaded from FIT, the VAB certificate and signature block appended at the end of each image are sent to Secure Device Manager (SDM) for authentication. U-Boot will validate the SHA384 of the image against the SHA384 hash stored in the VAB certificate before sending the image to SDM for authentication. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2021-03-08arm: socfpga: Move Stratix10 and Agilex to use TARGET_SOCFPGA_SOC64Siew Chin Lim2-4/+2
Create common macro TARGET_SOCFPGA_SOC64 for Stratix10 and Agilex. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-03-02reset: Remove addr parameter from reset_cpu()Harald Seiler1-1/+1
Historically, the reset_cpu() function had an `addr` parameter which was meant to pass in an address of the reset vector location, where the CPU should reset to. This feature is no longer used anywhere in U-Boot as all reset_cpu() implementations now ignore the passed value. Generic code has been added which always calls reset_cpu() with `0` which means this feature can no longer be used easily anyway. Over time, many implementations seem to have "misunderstood" the existence of this parameter as a way to customize/parameterize the reset (e.g. COLD vs WARM resets). As this is not properly supported, the code will almost always not do what it is intended to (because all call-sites just call reset_cpu() with 0). To avoid confusion and to clean up the codebase from unused left-overs of the past, remove the `addr` parameter entirely. Code which intends to support different kinds of resets should be rewritten as a sysreset driver instead. This transformation was done with the following coccinelle patch: @@ expression argvalue; @@ - reset_cpu(argvalue) + reset_cpu() @@ identifier argname; type argtype; @@ - reset_cpu(argtype argname) + reset_cpu(void) { ... } Signed-off-by: Harald Seiler <hws@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15arm: socfpga: Add secure register access helper functions for SoC 64bitsSiew Chin Lim1-0/+19
These secure register access functions allow U-Boot proper running at EL2 (non-secure) to access System Manager's secure registers by calling the ATF's PSCI runtime services (EL3/secure). Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2021-01-15arm: socfpga: soc64: Add SMC helper function for Intel SOCFPGA (64bits)Chee Hong Ang1-0/+13
invoke_smc() allow U-Boot proper running in non-secure mode (EL2) to invoke SMC call to ATF's PSCI runtime services such as System Manager's registers access, 2nd phase bitstream FPGA reconfiguration, Remote System Update (RSU) and etc. smc_send_mailbox() is a send mailbox command helper function which invokes the ATF's PSCI runtime service (function ID: INTEL_SIP_SMC_MBOX_SEND_CMD) to send mailbox messages to Secure Device Manager (SDM). Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
2020-10-21arm: socfpga: fix Gen5 enable of EMAC via FPGARalph Siemsen1-2/+2
An earlier conversion from struct to defines introduced two errors, both related to setup of EMAC routed via the FPGA. One of the offsets was incorrect, and the EMAC0/EMAC1 were swapped. The effect of this was rather odd: both ports could operate at gigabit, but one of them would fail to transmit when operating at 100Mbit. Fixes: db5741f7a85ec3ee79b64496172afaa7dc2cb225 ("arm: socfpga: Convert system manager from struct to defines") Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-10-09arm: socfpga: mailbox: Update mailbox response codesLey Foon Tan1-2/+36
Sync latest mailbox response codes from SDM firmware. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
2020-10-09arm: socfpga: soc64: Document down boot_scratch_cold register usageChin Liang See1-0/+8
Document down the usage of boot_scratch_cold register to avoid overlapping of usage in the code for S10 & Agilex. The boot_scratch_cold register is generally used for passing critical system info between SPL, U-Boot and Linux. Signed-off-by: Chin Liang See <chin.liang.see@intel.com> Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-10-09arm: socfpga: soc64: Show reset state in SPLChee Hong Ang1-0/+1
Print reset state (warm/cold) together with the source (watchdog/MPU) which has triggered the warm reset on S10 & Agilex. Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-10-09arm: socfpga: soc64: Add SDM triggered warm reset bit maskChee Hong Ang1-2/+9
Include SDM triggered warm reset bit (BIT1) in Reset Manager's stat register when checking for HPS warm reset status. Refactor the warm reset mask macro for clarity purpose. Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-09-03arm: socfpga: soc64: Check FPGA Config status register before bridge resetChee Hong Ang2-1/+10
Instead of querying SDM for FPGA configuration status through mailbox messages, U-Boot now checks System Manager's FPGA Config status register for FPGA configuration status before resetting bridge. Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-07-01socfpga: Mark socfpga_fpga_add() as static inline in the non-FPGA caseTom Rini1-1/+1
Unless we mark the function as 'static inline' it may end up being non-inlined by the compiled and result in duplicate functions. Cc: Marek Vasut <marex@denx.de> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Vasut <marex@denx.de>
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass11-0/+16
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18Use __ASSEMBLY__ as the assembly macrosSimon Glass4-6/+6
Some places use __ASSEMBLER__ instead which does not work since the Makefile does not define it. Fix them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-27arm: socfpga: stratix10: Fix incorrect CLKMGR_S10_PERPLL_BYPASS offsetLey Foon Tan1-1/+1
Offset value for CLKMGR_S10_PERPLL_BYPASS should be 0xb0, fix it. Reported-by: Chee Hong Ang <chee.hong.ang@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-03-31arm: socfpga: Add onchip RAM size macroLey Foon Tan2-0/+4
Add OCRAM size macro for Gen5 and Arria 10. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-02-05ddr: altera: Add DDR2 support to Gen5 driverMarek Vasut1-9/+37
Add DDR2 support to Gen5 DRAM driver. As the DDR2 macro names generated by Quartus are named differently than the DDR3 ones, use anon unions to store them in the same structures, without growing their size. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: stratix10: Enable SMMU accessThor Thayer1-0/+7
Enable TCU access through the Stratix10 CCU so that the SMMU can access the SDRAM. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-01-07arm: agilex: Add clock handoff offset for AgilexLey Foon Tan1-2/+7
Add clock handoff offset for Agilex. Remove S10 prefix to avoid confusion. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: agilex: Add clock wrapper functionsLey Foon Tan2-0/+16
Add clock wrapper functions call to clock DM functions to get clock frequency and used in cm_print_clock_quick_summary(). Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Fix CLKMGR_INTOSC_HZ to 400MHzLey Foon Tan1-3/+1
CLKMGR_INTOSC_HZ should be 400MHz, instead of 460MHz. Removed also unused macros CLKMGR_EOSC1_HZ and CLKMGR_FPGA_CLK_HZ. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Move Stratix10 and Agilex clock manager common codeLey Foon Tan2-13/+26
Move Stratix10 and Agilex clock manager common code to new header file. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: agilex: Add system manager supportLey Foon Tan1-1/+2
Add system manager support for Agilex. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Move Stratix10 and Agilex system manager common codeLey Foon Tan3-125/+124
Move Stratix10 and Agilex system manager common code to system_manager_soc64.h. Changed macros to use SYSMGR_SOC64_*. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: agilex: Add reset manager supportLey Foon Tan1-1/+2
Add reset manager support for Agilex. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Move Stratix10 and Agilex reset manager common codeLey Foon Tan3-96/+39
Move Stratix10 and Agilex reset manager common code to reset_manager_soc64.h. Changed macros to RSTMGR_SOC64_*. Remove unused RSTMGR_XXX defines. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Move firewall code to firewall fileLey Foon Tan1-4/+6
Move firewall related code to new firewall.c, to share code in Stratix 10 and Agilex. SDMMC will transfer data to OCRAM in SPL. So, enable privilege for SDMMC to allow DMA transfer to OCRAM. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: agilex: Add base address for Intel Agilex SoCLey Foon Tan1-0/+4
Add base address for Intel Agilex SoC. Reuse base_addr_s10.h for Agilex, only one base address is different from S10. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Convert clock manager from struct to definesLey Foon Tan4-215/+147
Convert clock manager for Gen5, Arria 10 and Stratix 10 from struct to defines. Change to get clock manager base address from DT node instead of using #define. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Convert system manager from struct to definesLey Foon Tan4-285/+118
Convert system manager for Gen5, Arria 10 and Stratix 10 from struct to defines. Change to get system manager base address from DT node instead of using #define. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Convert reset manager from struct to definesLey Foon Tan5-75/+26
Convert reset manager for Gen5, Arria 10 and Stratix 10 from struct to defines. Change to get reset manager base address from DT node instead of using #define. spl_early_init() initializes the DT setup. So, move spl_early_init() to beginning of function and before get base address from DT. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
generated by cgit v1.1 at 2024-09-15 03:24:05 +0000