aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/dts
AgeCommit message (Collapse)AuthorFilesLines
2017-07-26ARM: uniphier: remove SPL support for ARMv8 SoCsMasahiro Yamada6-42/+0
It has been a while since ARM Trusted Firmware supported UniPhier SoC family. U-Boot SPL was intended as a temporary loader that runs in secure world. It is a maintenance headache to support two different boot mechanisms. Secure firmware is realm of ARM Trusted Firmware and now U-Boot only serves as a non-secure boot loader for UniPhier ARMv8 SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-07-12arch/arm/dts: Add Turris Omnia device treeMarek Behún2-0/+447
This device tree is taken from mainline Linux kernel commit 7b7db5ab. Added is also a -u-boot.dtsi file with these additions: - aliases for I2C and SPI devices are added, because i2cmux and SPI flash doesn't work otherwise - spi_flash node has been added so that the new DM API works - the ATSHA204A node is added in the i2c@5 node - "u-boot,dm-pre-reloc"s are added in needed nodes for SPL build to work correctly Signed-off-by: Marek Behun <marek.behun@nic.cz> create mode 100644 arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi create mode 100644 arch/arm/dts/armada-385-turris-omnia.dts Signed-off-by: Stefan Roese <sr@denx.de>
2017-07-11Merge git://git.denx.de/u-boot-dmTom Rini18-0/+71
2017-07-11Merge branch 'master' of git://git.denx.de/u-boot-rockchipTom Rini12-12/+1674
2017-07-11tegra: fdt: Ensure that the console UART is enabledSimon Glass17-0/+68
Many tegra boards have the console UART node disabled. With livetree this prevents serial from working since it does not 'force' the console to be bound. Updates the affected boards to fix this error. The boards were checked with: for b in $(grep tegra boards.cfg |grep -v integrator | \ awk '{print $7}' | sort); do echo $b; fdtgrep -c nvidia,tegra20-uart b/$b/u-boot.dtb |grep okay; done Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1
2017-07-11rockchip: dts: rk3328: add aliases for mmc controllerKever Yang1-0/+3
Add aliases for mmc controller to get a fixed order with emmc at index 0 and sdmmc at index 1. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-11rockchip: dts: rk3328-evb: add sdmmc-pwren regulatorKever Yang1-0/+8
Use fixed regulator for sdmmc-pwren for sdmmc power. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11rockchip: Add basic support for phyCORE-RK3288 SoM based carrier boardWadim Egorov3-0/+801
The phyCORE-RK3288 is a SoM (System on Module) containing a RK3288 SoC. The module can be connected to different carrier boards. It can be also equipped with different RAM, SPI flash and eMMC variants. The Rapid Development Kit option is using the following setup: - 1 GB DDR3 RAM (2 Banks) - 1x 4 KB EEPROM - DP83867 Gigabit Ethernet PHY - 16 MB SPI Flash - 4 GB eMMC Flash Add basic support for the PCM-947 carrier board, a RK3288 based development board made by PHYTEC. This board works in a combination with the phyCORE-RK3288 System on Module. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11rockchip: dts: rk3399: control vbus of typec by fixed regulatorMeng Dongyang1-2/+14
Add fixed regulator for the port of typec0 and typec1 to control vbus instead of gpio. Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11rockchip: dts: rk3328: support and enable dwc2Meng Dongyang2-0/+24
Enable dwc2 controller and add fixed regulator for dwc2 controller to control vbus. Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11rockchip: dts: rk3328: add fixed regulator node for xhciMeng Dongyang1-1/+10
The driver changes gpio to fixed regulator to control vbus, so add fixed regulator node in DTS for xhci driver. Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11rockchip: firefly-rk3399: dts: enable sdmmc deviceKever Yang1-0/+7
Enable sdmmc device and add the spl boot device sequence. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11rockchip: rk3328: dtsi use max-frequency for mmc nodeKever Yang1-4/+4
Since the 'clock-freq-min-max' is deprecated, we use max-frequency. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11rockchip: rk3288: dtsi use max-frequency for mmc nodeKever Yang1-4/+4
Since the 'clock-freq-min-max' is deprecated, we use max-frequency. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11rockchip: rk3036: dtsi use max-frequency for mmc nodeKever Yang1-1/+1
Since the 'clock-freq-min-max' is deprecated, we use max-frequency. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11rockchip: rk322x: add dts fileKever Yang2-0/+787
The dts files are from kernel and with modify to adapt U-Boot. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11rockchip: dts: rk3368: add dmc nodeKever Yang1-0/+7
Add dmc node to enable sdram driver. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11rockchip: dts: rk3328: add dmc nodeKever Yang1-0/+7
Add a dmc node for sdram driver. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-10ARM: dts: OMAP5+: Enable gpio in SPLLokesh Vutla1-0/+8
gpio2 is used to detect lcd based on which pin mux is done in SPL. gpio7 is used to enable vtt regulator. Enable these two gpio nodes in SPL. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-10ARM64: poplar: hi3798cv200: u-boot support for Poplar 96BoardsJorge Ramirez-Ortiz1-0/+29
This port adds support for: 1) Serial 2) eMMC 3) USB It has been tested with ARM TRUSTED FIRMWARE running u-boot as the BL33 executable [see board's README] eMMC has been tested for reading and booting the loader and linux kernels as well as saving the u-boot environment. USB has been tested with ASIX networking adapter and SanDisk 7.4GB drive. PSCI has been tested via the reset call (PSCI executes from DDR) The firwmare upgrade process has been tested via TFTP and USB FAT filesystem containing the fastboot.bin image in one of the partitions. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2017-07-10ARM64: dts: hi3798cv200-poplar: add device tree bindingsJorge Ramirez-Ortiz2-0/+573
Pulled from Linux 4.12-rc3 Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-10ARM: dts: k2g: Add DT support for K2G Industrial Communication Engine evmCooper Jr., Franklin3-1/+57
Add basic DT support for K2G ICE evm. Only minimal peripherals are supported to allow console output and MMC boot. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-10ARM: dts: k2g: Disable netcp by defaultCooper Jr., Franklin2-0/+5
Disable netcp by default like all other peripherals in the dtsi file. Enable the peripheral explicitly in the board specific dts file. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-10ARM: dts: keystone-k2g-evm: Add unit address to memory nodeCooper Jr., Franklin2-5/+5
Upstream Linux has the unit address being added to the various 66AK2Gx boards dts. Therefore, update the dts to mimic this change. Also remove memory node from the base K2G dtsi file. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-10ARM: dts: keystone-k2g: Remove skeleton.dtsiCooper Jr., Franklin1-1/+2
Adding the unit address to the memory node was causing the below error: Warning (reg_format): "reg" property in /memory has invalid length (8 bytes) (#address-cells == 2, #size-cells == 2) Further debugging showed that this was due to the memory node added by default to skeleton.dtsi which was being included in keystone-k2g.dtsi. Adding a missing node was all that was needed to remove this deprecated dtsi file from the SoC dtsi. With skeleton.dtsi removed the dtc compiler no longer complained about including the unit address for the memory node. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-10arm: dts: Add new "generic" 66AK2Gx device tree file.Cooper Jr., Franklin3-1/+49
With U-boot runtime board detect for DTB selection a "default" dtb needs to be created. This will be used temporarily until the "proper" dtb is selected. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-10ARM: dts: k2g: Introduce U-boot specific dtsi fileCooper Jr., Franklin1-0/+19
Introduce K2G evm specific dtsi file for U-boot specific configurations. This will help seperate U-boot only configurations thus making it easier to keep device tree files synced between U-boot and Linux. For now only add nodes to allow i2c drivers to be probed early during the boot process. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-10ARM: dts: keystone-k2e-evm: Add U-boot specific dtsi fileCooper Jr., Franklin1-0/+15
With Davinci I2C switching to device model, K2E requires U-boot specific device tree entries. This is only required for I2C 1 which is needed extremely early during the boot process. Fixes: 1743d040b1df ("ARM: keystone: Enable DM_I2C by default") Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
2017-06-29atmel, at91: fix taurus boardHeiko Schocher1-0/+2
since commit: f8b7fff1d5c5 "serial: atmel_usart: Add clk support" taurus board comes not up anymore. Fix it. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
2017-06-29atmel, at91: fix smartweb boardHeiko Schocher1-0/+2
since commit: f8b7fff1d5c5 "serial: atmel_usart: Add clk support" smartweb board comes not up anymore. Fix it. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
2017-06-24Merge git://git.denx.de/u-boot-uniphierTom Rini27-353/+171
- fix sparse warnings - sync DT with Linux - add new board support (LD11/LD20 global)
2017-06-25arm64: dts: uniphier: add support for LD20 Global boardKunihiko Hayashi2-0/+62
Add initial device tree support for LD20 Global board. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-25arm64: dts: uniphier: add support for LD11 Global boardKunihiko Hayashi2-0/+80
Add initial device tree support for LD11 Global board. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-25ARM: dts: uniphier: sync DT with Linux next-20170622Masahiro Yamada24-353/+29
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-23atmel, at91: fix corvus boardHeiko Schocher1-0/+2
since commit: f8b7fff1d5c5 "serial: atmel_usart: Add clk support" corvus board comes not up anymore. Fix it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-23ARM: dts: OMAP5+: Update spl specific dtsLokesh Vutla1-10/+10
Now that we can specify DT nodes that can be used in spl, mark all necessary nodes as u-boot,dm-spl. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-23ARM: dts: am43xx: Update spl specific dtsLokesh Vutla1-7/+7
Now that we can specify DT nodes that can be used in spl, mark all necessary nodes as u-boot,dm-spl. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-21Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini8-143/+303
2017-06-21Merge tag 'xilinx-for-v2017.07' of git://www.denx.de/git/u-boot-microblazeTom Rini2-0/+18
Xilinx changes for v2017.07 ZynqMP: - config cleanup - SD LS mode support - psu_init* cleanup - unmap OCM - Support for SMC Zynq: - add ddrc to Kconfig - add topic-miamilite board support
2017-06-20ARM: dts: omap3: Fix dts->dtb typoMarek Vasut1-1/+1
Trivial, fix typo. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com>
2017-06-20arm: zynq: Add support for the topic-miamilite system-on-moduleMike Looijmans2-0/+18
The topic-miamilite SoM contains a Zynq xc7z010 SoC, 1GB DDR3L RAM, 64MB dual-parallel QSPI NOR flash and clock sources. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-19Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini5-1/+346
2017-06-14Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2-78/+0
2017-06-14sun50i: h5: Add initial NanoPi NEO2 supportJagan Teki2-0/+87
NanoPi NEO2 is designed and developed by FriendlyElec using the Allwinner 64-bit H5 SOC. NanoPi Neo2 key features - Allwinner H5, Quad-core 64-bit Cortex-A53 - 512MB DDR3 RAM - microSD slot - 10/100/1000M Ethernet - Serial Debug Port - 5V 2A DC MicroUSB power-supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2017-06-14sun50i: a64: Add initial Orangepi Win/WinPlus supportJagan Teki2-0/+95
Orangepi Win/WinPlus is an open-source single-board computer using the Allwinner A64 SOC. A64 Orangepi Win/WinPlus has - A64 Quad-core Cortex-A53 64bit - 1GB(Win)/2GB(Win Plus) DDR3 SDRAM - Debug TTL UART - Four USB 2.0 - HDMI - LCD - Audio and MIC - Wifi + BT - IR receiver - 5V DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2017-06-14sun50i: h5: Add initial Orangepi Zero Plus 2 supportJagan Teki2-1/+99
Orangepi Zero Plus 2 is an open-source single-board computer using the Allwinner h5 SOC. H5 Orangepi Zero Plus 2 has - Quad-core Cortex-A53 - 512MB DDR3 - micrSD slot and 8GB eMMC - Debug TTL UART - HDMI - Wifi + BT - OTG+power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2017-06-12ARM: tegra: remove Whistler supportStephen Warren2-78/+0
Whistler is an ancient Tegra 2 reference board. I may have been the only person who ever used it with upstream software, and I've just recycled the board hardware. Hence, it makes sense to remove support from software. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2017-06-12ARM: dts: keystone-k2hk-evm: Add U-boot specific dtsi fileCooper Jr., Franklin1-0/+15
With Davinci I2C switching to device model, K2HK requires U-boot specific device tree entries. This is only required for I2C 1 which is needed extremely early during the boot process. Fixes: 1743d040b1df ("ARM: keystone: Enable DM_I2C by default") Reported-by: Yan Liu <yan-liu@ti.com> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
2017-06-12serial: stm32x7: align compatible with kernel onePatrice Chotard1-1/+1
stm32x7.c driver is dedicated for STM32F7. In kernel, "st,stm32-usart" and "st,stm32-uart" compatible strings are dedicated for STM32F4. To keep U-boot and kernel aligned, replace the serial compatible string from "st,stm32-usart", "st,stm32-uart" to "st,stm32f7-usart", "st,stm32f7-uart" specific for STM32F7. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Christophe KERELLO <christophe.kerello@st.com> Reviewed-by: Patrick DELAUNAY <patrick.delaunay@st.com> Acked-by: Vikas MANOCHA <vikas.manocha@st.com>
2017-06-09rockchip: Fix regualtor typo in veyronSimon Glass1-1/+1
This typo doesn't actually cause any problems, but is wrong. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-07-09 01:29:32 +0000