aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/cpu/arm1136
AgeCommit message (Collapse)AuthorFilesLines
2011-10-27imx: fix coding styleFabio Estevam2-10/+15
Fix checkpatch warning and errors in several i.MX related files. While at it also address a checkpatch warning at arch/arm/cpu/armv7/mx5/soc.c regarding the usage of extern in a C file. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-10-27mx31: provide readable WEIM CS accessorHelmut Raiger1-0/+11
setup_weimcs() and some macros are added to support the setup for i.MX31 WEIM chip selects. As a compromise between verbosity and readability an ASCII-art'ish bit comment is used instead of bitfields. All i.MX31 boards have been patched to use this approach using a helper program to verify the changes. Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> Acked-by: Stefano Babic <sbabic@denx.de>
2011-10-13mx31: make HSP clock for mx3fb driver availableHelmut Raiger1-13/+27
This additionally updates mx31/generic.c by - replacing __REG() macro accesses with readl() and writel() - providing macros for PDR0 and PLL bit accesses Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> Acked-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-09-30MX31: Disable watchdog during low-power modesFabio Estevam1-2/+2
Turn on the watchdog WDZST bit so that watchdog timer does not count during low power modes. Prior to applying this patch mx31pdk board got watchdog resets because when it booted in the Linux prompt and there was no activity, the system entered into idle mode while watchdog timer was still active. Fix this by disabling watchdog timer during idle mode. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-09-30MX31: Improve readability for reset causeFabio Estevam1-1/+1
Currently the reset cause is printed like: CPU: Freescale i.MX31 rev 2.0 at 531 MHz.Reset cause: POR Improve readability by adding a new line like it is done on other i.MX boards. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-09-07MX31: fix missing mxc_get_clk() callStefano Babic1-0/+1
Add missing case to be used in common MXC code. Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-07omap24xx: fix 'reset_timer_masked' declaration errorWolfgang Denk1-11/+9
Commit 17659d7 "Timer: Remove reset_timer_masked()" introduced a static declaration for reset_timer_masked() which causes build errors: timer.c:45: error: static declaration of 'reset_timer_masked' follows non-static declaration include/asm/u-boot-arm.h:70: error: previous declaration of 'reset_timer_masked' was here Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Graeme Russ <graeme.russ@gmail.com> Cc: Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-07Makefile : fix generation of cpu related asm-offsets.hStefano Babic1-2/+0
commit 0edf8b5b2fa0d210ebc4d6da0fd1aceeb7e44e47 breaks building on a different directory with the O= parameter. The patch wil fix this issue, generating always asm-offsets.h before the other targets. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Matthias Weisser <weisserm@arcor.de> CC: Wolfgang Denk <wd@denx.de>
2011-09-04MX: MX35 / MX5: uniform clock command with powerpcStefano Babic1-2/+2
There was already a command to show the processor clocks for PowerPC (clocks). For i.MX, the "clockinfo" command was introduce. The patch sets the same command name used on PowerPC. A nasty and not needed newline is also dropped in the help for the command. Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-08-04Convert ISO-8859 files to UTF-8Albert ARIBAUD1-2/+2
There was a mix of UTF-8 and ISO-8859 files in the U-Boot source tree, which could cause issues with the patchwork review system. This commit converts all ISO-8859 files to UTF-8. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-07-26Timer: Remove reset_timer_masked()Graeme Russ2-14/+7
In some circumstances, reset_timer_masked() was called be timer_init() in order to perform architecture specific timer initialisation. In such cases, the required code in reset_timer_masked() has been moved into timer_init()
2011-07-26Timer: Remove reset_timer() for non-Nios2 archesGraeme Russ3-15/+0
2011-07-26Timer: Remove set_timer completelyGraeme Russ3-14/+0
2011-07-26replace CONFIG_PRELOADER with CONFIG_SPL_BUILDAneesh V1-10/+10
replace all occurences of CONFIG_PRELOADER with CONFIG_SPL_BUILD Signed-off-by: Aneesh V <aneesh@ti.com>
2011-07-18MX31: Cleanup clock functionStefano Babic1-1/+20
The patch provide the same API used with other i.MX processors and get rid of mx31_ functions. Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-07-14build: Add targets for auto gen of asm-offsets.h and use it in imx35Matthias Weisser1-11/+0
asm-offsets.h should be auto generated. This patch adds two rules to rules.mk which makes this possible and removes the rules on imx35. Signed-off-by: Matthias Weisser <weisserm@arcor.de> Acked-by: Stefano Babic <sbabic@denx.de>
2011-07-04armv7: rename cache related CONFIG flagsAneesh V1-2/+2
Replace the cache related CONFIG flags with more meaningful names. Following are the changes: CONFIG_L2_OFF -> CONFIG_SYS_L2CACHE_OFF CONFIG_SYS_NO_ICACHE -> CONFIG_SYS_ICACHE_OFF CONFIG_SYS_NO_DCACHE -> CONFIG_SYS_DCACHE_OFF Signed-off-by: Aneesh V <aneesh@ti.com> V2: * Changed CONFIG_L2_OFF -> CONFIG_SYS_NO_L2CACHE V4: * Changed all three flags to the final names suggested as above and accordingly changed the commit message
2011-05-23MX31: Make get_reset_cause() static and drop unreachable codeStefano Babic1-5/+1
get_reset_cause() should not be exported. Drop code in the function after return statement that can generate warnings due to unreachable code. Signed-off-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-05-11MX31: change return value of get_cpu_revStefano Babic1-13/+18
Drop warnings in get_cpu_rev and changes the return value (a u32 instead of char * is returned) of the function to be coherent with other processors. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Detlev Zundel <dzu@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com>
2011-04-27MX31: Introduce get_reset_cause()Fabio Estevam1-1/+28
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Detlev Zundel <dzu@denx.de>
2011-04-27ARM: mx31: Print the silicon versionFabio Estevam1-2/+28
Use the same method of the Linux kernel to print the MX31 silicon version on boot. Tested on a MX31PDK with a 2.0 silicon, where it shows: CPU: Freescale i.MX31 rev 2.0 at 531 MHz Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-04-27IMX: MX31: Cleanup include files and drop nasty #ifdef in driversStefano Babic3-4/+4
As exception among the i.MX processors, the i.MX31 has headers without general names (mx31-regs.h, mx31.h instead of imx-regs.h and clock.h). This requires several nasty #ifdef in the drivers to include the correct header. The patch cleans up the driver and renames the header files as for the other i.MX processors. Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-04-27MX31: add support for MX31 watchdogStefano Babic1-1/+37
The patch add CONFIG_HW_WATCHDOG to be used with the internal watchdog timer of the MX31 processor. Two function are exported for the board maintainers: mxc_hw_watchdog_enable mxc_hw_watchdog_reset The board maintainer can decide to use mxc_hw_watchdog_reset as hw_watchdog_reset, or to implement his own function to reset the watchdog. The watchdog timer can be configured with CONFIG_SYS_WD_TIMER_SECS (value in seconds). The MX31 allows values between 0.5 (CONFIG_SYS_WD_TIMER_SECS = 0) and 128 seconds. Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-03-27arm: fix incorrect monitor protection region in FLASHPo-Yu Chuang2-0/+6
Monitor protection region in FLASH did not cover .rel.dyn and .dynsym sections, because it uses __bss_start to compute monitor_flash_len. Use _end instead. Add _end to linker scripts for end of u-boot image Add _end_ofs to all the start.S. Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
2011-03-27rename _end to __bss_end__Po-Yu Chuang2-2/+2
Currently, _end is used for end of BSS section. We want _end to mean end of u-boot image, so we rename _end to __bss_end__ first. Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
2011-02-21arm1136 relocation: Fix calculation of board_init_rFabio Estevam1-1/+1
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-02-21arm1136: Fix NAND bootFabio Estevam1-12/+4
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
2011-02-02arm1136: timer: Replace bss variable by gdHeiko Schocher2-20/+18
Reuse the gd->tbl value for timestamp and add gd->lastinc for lastinc bss values in the arm1136 timer driver for mx31 and omap24xx The usage of bss values in drivers before initialisation of bss is forbidden. In that special case some data in .rel.dyn gets corrupted. This patch is similiar to the patch Dirk Behme posted for the armv7/omap-common/timer.c Tested on the mx31 based qong board Signed-off-by: Heiko Schocher <hs@denx.de> cc: Albert ARIBAUD <albert.aribaud@free.fr> Acked-by: Albert ARIBAUD <albert.aribaud@free.fr>
2011-02-02ARM: */start.S: code cleanupLiu Hui-R643431-2/+0
Remove the useless code from start.S Signed-off-by: Jason Liu <r64343@freescale.com> Tested-by: Andreas Bießmann <andreas.devel@googlemail.com>
2011-02-02Add support for MX35 processorStefano Babic5-0/+805
The patch adds basic support for the Freescale's i.MX35 (arm1136 based) processor. The patch adds also a prototype for the initialization of the FEC(ethernet controller) to netdev.h to avoid warnings. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-12-13ARM: */start.S: use canonical asm syntaxWolfgang Denk1-1/+1
Make code build with older tool chains. Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-12-09arm: fixloop(): do not use r8 for relocationAndreas Bießmann1-3/+3
r8 is used for global_data and should therefore be left alone! For C code the compiler flag --fixed-r8 does the job, but in assembler we need to be aware of that fact. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2010-12-09arm: relocate_code(): do not set register uselessAndreas Bießmann1-2/+2
In case we are still at relocation target address before relocation we do not need to load the registers needed for relocation. We should instead skip the whole relocation part and jump over to clear_bss immediately. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2010-12-09arm: copy_loop(): use scratch registerAndreas Bießmann1-5/+5
This patch uses r1 as scratch register for copy_loop(). Therefore we do not longer need r7 for the storage of relocate_code()'s 'addr_moni' (the destination address of relocation). Therefore r7 can be used later on for other purposes. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2010-12-08arm: add 8-byte alignment for ABI compliance before board_init_fHeiko Schocher1-0/+1
suggested from Daniel Hobi<daniel.hobi@schmid-telecom.ch> Tested on following boards: arm1136: qong armv7: omap3_beagle arm926ejs: magnesium, tx25 Signed-off-by: Heiko Schocher <hs@denx.de> cc: Daniel Hobi <daniel.hobi@schmid-telecom.ch> cc: Albert ARIBAUD <albert.aribaud@free.fr>
2010-11-17Switch from archive libraries to partial linkingSebastien Carlier3-6/+6
Before this commit, weak symbols were not overridden by non-weak symbols found in archive libraries when linking with recent versions of binutils. As stated in the System V ABI, "the link editor does not extract archive members to resolve undefined weak symbols". This commit changes all Makefiles to use partial linking (ld -r) instead of creating library archives, which forces all symbols to participate in linking, allowing non-weak symbols to override weak symbols as intended. This approach is also used by Linux, from which the gmake function cmd_link_o_target (defined in config.mk and used in all Makefiles) is inspired. The name of each former library archive is preserved except for extensions which change from ".a" to ".o". This commit updates references accordingly where needed, in particular in some linker scripts. This commit reveals board configurations that exclude some features but include source files that depend these disabled features in the build, resulting in undefined symbols. Known such cases include: - disabling CMD_NET but not CMD_NFS; - enabling CONFIG_OF_LIBFDT but not CONFIG_QE. Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
2010-11-17ARM: fix linker file for newer ld supportAlbert Aribaud2-34/+20
older ld emitted all ELF relocations in input sections named .rel.dyn, whereas newer ld uses names of the form .rel*. The linker script only collected .rel.dyn input sections. Rewrite to collect all .rel* input sections. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
2010-10-29Drop support for CONFIG_SKIP_RELOCATE_UBOOTWolfgang Denk1-4/+0
For ARM systems, before ELF relocation was introduced, CONFIG_SKIP_RELOCATE_UBOOT coul be used to prevent *COPYING* the U-Boot image from whereever it was loaded to it's link address (CONFIG_SYS_TEXT_BASE). The name was badly chosen, as no relocation was performed at all, it was just a memcpy(). With ELF relocation, this does not work like that any more, and related boards need to be fixed anyway. So don't keep this relict any longer. Signed-off-by: Wolfgang Denk <wd@denx.de> Tested-by: Heiko Schocher <hs@denx.de> Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-10-29Drop support for CONFIG_SYS_ARM_WITHOUT_RELOCWolfgang Denk1-127/+0
When this define was introduced, the idea was to provide a soft migration path for ARM boards to get adapted to the new relocation support. However, other recent changes led to a different implementation (ELF relocation), where this no longer works. By now CONFIG_SYS_ARM_WITHOUT_RELOC does not only not help any more, but it actually hurts because it obfuscates the actual code by sprinkling it with lots of dead and non-working debris. So let's make a clean cut and drop CONFIG_SYS_ARM_WITHOUT_RELOC. Signed-off-by: Wolfgang Denk <wd@denx.de> Tested-by: Heiko Schocher <hs@denx.de> Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-10-26ARM: use the same branch insn on all architecturesWolfgang Denk1-1/+1
For the "fixloop" implementation in start.S a number of different instructions was used. Unify code so all architectures use "blo" here because it is more robust in case of incorrect alignments. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.aribaud@free.fr> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Acked-by: Heiko Schocher <hs@denx.de>
2010-10-26ARM: fix address setup in start.SDarius Augulis1-2/+4
Fix address setup bug for ARM. This bug stops u-boot booting if CONFIG_SKIP_RELOCATE_UBOOT is defined. Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
2010-10-26Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated valueWolfgang Denk1-4/+5
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not being able to use "sizeof(struct global_data)" in assembler files. Recent experience has shown that manual synchronization is not reliable enough. This patch renames CONFIG_SYS_GBL_DATA_SIZE into GENERATED_GBL_DATA_SIZE which gets automatically generated by the asm-offsets tool. In the result, all definitions of this value can be deleted from the board config files. We have to make sure that all files that reference such data include the new <asm-offsets.h> file. No other changes have been done yet, but it is obvious that similar changes / simplifications can be done for other, related macro definitions as well. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-26ARM: Use consistent assembler syntaxGray Remlin1-5/+5
Signed-off-by: Gray Remlin <g_remlin@rocketmail.com> Acked-by: Heiko Schocher <hs@denx.de>
2010-10-20MX31: Removed warnings for iomux functionStefano Babic1-4/+3
Removed warnings generated in the mx31_set_pad() function. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-10-19Merge branch 'elf_reloc'Wolfgang Denk2-78/+108
Conflicts: arch/arm/include/asm/config.h board/LaCie/edminiv2/config.mk board/karo/tx25/config.mk board/logicpd/imx27lite/config.mk doc/README.arm-relocation Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-10-18Rename TEXT_BASE into CONFIG_SYS_TEXT_BASEWolfgang Denk1-1/+1
The change is currently needed to be able to remove the board configuration scripting from the top level Makefile and replace it by a simple, table driven script. Moving this configuration setting into the "CONFIG_*" name space is also desirable because it is needed if we ever should move forward to a Kconfig driven configuration system. Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-10-17Merge branch 'master' of git://git.denx.de/u-boot-imxWolfgang Denk1-0/+17
2010-10-13MX31: add support for setting pin padsStefano Babic1-0/+17
The patch adds a utility function and defines to set the pad as it is done in linux. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-10-13arm1136, qong: add support for ELF relocationsHeiko Schocher2-78/+108
Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Heiko Schocher <hs@denx.de> cc: Albert ARIBAUD <albert.aribaud@free.fr>
2010-10-11arm: bugfix: replace ble with blo in start.S filesAlbert Aribaud1-4/+4
Generalized misuse of ble within relocation and bss initialization loops caused one iteration too many. Instead of ble ('branch if lower or equal'), use blo ('branch if lower'). While we're at it, fix all 'addreee' typos. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
generated by cgit v1.1 at 2024-07-15 20:27:59 +0000