aboutsummaryrefslogtreecommitdiff
path: root/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2022-06-27Merge tag 'xilinx-for-v2022.10' of ↵WIP/27Jun2022-nextTom Rini1-4/+2
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2022.10 cpu: - Add driver for microblaze cpu net: - Add support for DM_ETH_PHY to AXI emac and emaclite xilinx: - Switch platforms to DM_ETH_PHY - DT chagnes in ZynqMP and Zynq - Enable support for SquashFS zynqmp: - Add support for KR260 boards - Move BSS from address 0 - Move platform identification from board code to soc driver - Improve zynqmp_psu_init_minimize versal: - Enable loading app at EL1 serial: - Setup default address and clock rates for DEBUG uarts pinctrl: - Add support for tri state and output enable properties relocate-rela: - Clean relocate-rela implementation for ARM64 - Add support for Microblaze microblaze: - Add support for runtime relocation - Rework cache handling (wiring, Kconfig) based on cpuinfo - Remove interrupt support timer: - Extract axi timer driver from Microblaze to generic location
2022-06-24tools: relocate-rela: Read rela start/end directly from ELFMichal Simek1-3/+1
There is no need to pass section information via parameters. Let's read text base and rela start/end directly from elf. It will help with reading other information from ELF for others architecture. Input to relocate-rela is u-boot binary and u-boot ELF. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/ab7ae14a6e058722e8c608089729e98edf20a08d.1655299267.git.michal.simek@amd.com
2022-06-24Makefile: Fix description for relocate-rela parametersMichal Simek1-1/+1
Numbers in comment are shifter which is visible from command which calls them. Also relocate-rela usage is describing them. "Usage: %s <bin file> <text base> <rela start> <rela end>" Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/bb0287b9071eb33eea0cf914a7128c2603684377.1655299267.git.michal.simek@amd.com
2022-06-20Prepare v2022.07-rc5v2022.07-rc5Tom Rini1-1/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Prepare v2022.07-rc4v2022.07-rc4Tom Rini1-1/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-23Prepare v2022.07-rc3v2022.07-rc3Tom Rini1-1/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-23powerpc: mpc85xx: Fix CONFIG_OF_EMBED support for NOR bootingPali Rohár1-1/+1
mpc85xx NOR binary contains also reset vector and therefore option CONFIG_MPC85XX_HAVE_RESET_VECTOR must be defined. When build system uses binman, it takes care of constructing final image which consist of u-boot-without-reset-vector, DTB and reset-vector. CONFIG_OF_EMBED does not use binman, there is no external DTB and Makefile produce directly final u-boot.bin binary. So in this case mpc85xx reset vector must not be stripped from the final u-boot.bin binary. Fix it. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-05-11Makefile: update warning about CONFIG_OF_EMBEDWIP/2022-05-11-Kconfig-cleanups-etcRalph Siemsen1-1/+1
Update the diagnostic message with revised location of document, which changed in 3e9fddfc4f1 ("doc: Move devicetree control doc to rST") Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
2022-05-09Prepare v2022.07-rc2v2022.07-rc2Tom Rini1-1/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-07Makefile: support CROSS_COMPILE=armv7a-*Heinrich Schuchardt1-1/+1
Gentoo uses armv7a-hardfloat-linux-gnueabi- as cross compiler prefix. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-05-07Makefile: Avoid non-portable GNU sed extensionMark Kettenis1-1/+1
Use [:space:] instead of \s and \S in regular expression that determines the sandbox target architecture. Fixes the build failure on OpenBSD introduced with commit 4e65ca00f3a3 ("efi_loader: bootmgr: add booting from removable media"). Fixes: f7691a6d736b ("sandbox: allow cross-compiling sandbox") Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2022-05-02Introduce Verifying Program Loader (VPL)Simon Glass1-0/+14
Add support for VPL, a new phase of U-Boot. This runs after TPL. It is responsible for selecting which SPL binary to run, based on a verified-boot process. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-05-02Makefile: Tidy up the TPL build rulesSimon Glass1-2/+5
These should follow the same pattern as SPL, for consistency. Fix them. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-05-02Makefile: Simplify devicetree rules for SPL/TPLSimon Glass1-5/+2
The current logic checks several options to decide whether SPL/TPL need the U-Boot devicetree to be built. In fact we can check OF_CONTROL, which is enabled in all cases that matter. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-05-02test: Tidy up test building with SPLSimon Glass1-1/+1
We can in principle add tests to any SPL build, e.g. TPL or VPL. Update the build rules to handle this. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25Prepare v2022.07-rc1v2022.07-rc1Tom Rini1-2/+2
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-18Makefile: Drop a stale comment about linkingSimon Glass1-4/+0
The bug mentioned here is fixed, so drop the comment. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-07Makefile: Sort u-boot-initial-env outputChristoph Niedermaier1-1/+2
This will sort the default environment file generated by "make u-boot-initial-env", but won't sort the default environment in the compiled u-boot binary. The file u-boot-initial-env is considered to use for the userpace environment access tools [1] in case of that the environments is written the first time into its location. This is done on the one hand for a better overview and comparison of the generated environment file. On the other hand it is to synchronize the output with the script get_default_env.sh, which generated a sorted default environment file. The sorting preserves the order of equal variable names by sorting only the variable name, and disable the last-resort comparison. After sorting, unnoticed blank lines at the end move to the top. Avoid that by removing it before sorting. [1] https://github.com/sbabic/libubootenv Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Tested-by: Stefano Babic <sbabic@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Marek Behún <marek.behun@nic.cz> To: u-boot@lists.denx.de Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-06Makefile: add endian link flag to u-boot-elf.oDu Huanpeng1-0/+1
fix compile error when using a little-endian to build with configs: sfr_nb4-ser_ram_defconfig comtrend_wap5813n_ram_defconfig comtrend_ar5387un_ram_defconfig comtrend_ct5361_ram_defconfig comtrend_vr3032u_ram_defconfig comtrend_ar5315u_ram_defconfig huawei_hg556a_ram_defconfig netgear_dgnd3700v2_ram_defconfig Signed-off-by: Du Huanpeng <dhu@hodcarrier.org>
2022-04-04Merge branch 'next'Tom Rini1-3/+16
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-04Prepare v2022.04v2022.04Tom Rini1-1/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-04env: do not fail on non-existing env.in fileAndrey Zhizhikin1-1/+1
If include/generated/env.in does not exist, which is a typical case for clean build, quiet_cmd_gen_envp command tries to delete this file unconditionally. This produces following warning during the build: ENVP include/generated/env.in rm: cannot remove 'include/generated/env.in': No such file or directory Add '-f' option to the `rm` command to not complain if file does not exist. Fixes: f432eb6d8a9d ("env: Avoid using a leftover text-environment file") Reviewed-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2022-03-31env: Avoid using a leftover text-environment fileSimon Glass1-1/+4
If include/generated/environment.h exists (perhaps leftover from a build of another board) it is used, even if the board currently being built does not have a text environment. This causes a build error. Fix it by emptying the file if it should not be there. Fixes: https://source.denx.de/u-boot/u-boot/-/issues/9 Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Sean Anderson <seanga2@gmail.com> Tested-by: Sean Anderson <seanga2@gmail.com>
2022-03-31Makefile: provide sah-key to binmanPhilippe Reynes1-0/+1
Set the variable pre-load-key-path with the shell variable PRE_LOAD_KEY_PATH that contain the keys path (used for signature). This variable pre-load-key-path is provided to binman. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-31Makefile: make clean should delete include/generated/env.inHeinrich Schuchardt1-2/+2
'make sifive_unamtched_defconfig; make clean; make' fails if file include/generated/env.in exists. 'make clean' should remove all files that stop building. Add file include/generated/env.in to the clean target. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Marek Behún <marek.behun@nic.cz>
2022-03-28Merge tag 'v2022.04-rc5' into nextTom Rini1-4/+5
Prepare v2022.04-rc5
2022-03-28Prepare v2022.04-rc5v2022.04-rc5Tom Rini1-1/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-28Makefile: add drivers/video/u_boot_logo.S to cleanHeinrich Schuchardt1-1/+2
make sandbox_defconfig make mrproper make tests fails with ../drivers/video/u_boot_logo.S: Assembler messages: ../drivers/video/u_boot_logo.S:5: Error: file not found: drivers/video/u_boot_logo.bmp We have to delete the generated file. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-25Add option to use -OgSean Anderson1-0/+4
This adds support for using -Og when building U-Boot. According to the gcc man page: > -Og should be the optimization level of choice for the standard > edit-compile-debug cycle, offering a reasonable level of optimization > while maintaining fast compilation and a good debugging experience. This optimization level is roughly -O1 minus a few additional optimizations. It provides a noticably better debugging experience, with many fewer variables <optimized out>. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-25Split CONFIG_CC_OPTIMIZE_FOR_SIZE into two configsSean Anderson1-1/+3
This adds a separate CONFIG_CC_OPTIMIZE_FOR_SPEED option in a choice, in preparation for adding another optimization option. Also convert SH's makefile to use this new option. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-20Makefile: Fix doc path in warning messageJohannes Krottmayer1-2/+2
Fix documentation path in warning message about deprecated device driver. Signed-off-by: Johannes Krottmayer <krjdev@gmail.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-14Merge tag 'v2022.04-rc4' into nextTom Rini1-2/+2
Prepare v2022.04-rc4
2022-03-14Prepare v2022.04-rc4v2022.04-rc4Tom Rini1-1/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini1-1/+1
Update and fixes for sl28, lx2, pblimage generation for some powerpc products
2022-03-02Makefile: Add a way to check for pylint errorsSimon Glass1-2/+8
Add a new 'pylint_err' target which only reports errors, not warnings. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-02-28Prepare v2022.04-rc3v2022.04-rc3Tom Rini1-1/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-28tools: pblimage: fix image header verification functionHou Zhiqiang1-1/+1
The Layerscape platforms have different RCW header value from FSL PowerPC platforms, the current image header verification callback is only working on PowerPC, it will fail on Layerscape, this patch is to fix this issue. This is a historical problem and exposed by the following patch: http://patchwork.ozlabs.org/project/uboot/patch/20220114173443.9877-1-pali@kernel.org Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-25scripts: Makefile.lib: generate dsdt_generated.c instead of dsdt.cPhilippe Reynes1-1/+2
There is a conflict between the static file lib/acpi/dsdt.c and the file dsdt.c generated dynamicaly by scripts/Makefile.lib. When a mrproper is done, the static file dsdt.c is removed. If a build with acpi enabled is launched after, the following error is raised: CC lib/acpi/acpi_table.o make[2]: *** No rule to make target 'lib/acpi/dsdt.asl', needed by 'lib/acpi/dsdt.c'. Stop. scripts/Makefile.build:394: recipe for target 'lib/acpi' failed To avoid such error, the generated file is named dsdt_generated.c instead of dstdt.c. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-02-22binman: Add support for TEE BL32Roger Quadros1-0/+1
Add an entry for OP-TEE Trusted OS 'BL32' payload. This is required by platforms using Cortex-A cores with TrustZone technology. Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org> Add missing-blob-help, renumber the test file, update entry-docs: Signed-off-by: Simon Glass <sjg@chromium.org>
2022-02-14Prepare v2022.04-rc2v2022.04-rc2Tom Rini1-1/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-11Replace echo -n's used in environment processing with touchqthedev1-2/+2
echo -n does not give the intended effect when invoked in macOS through /bin/sh, which is the shell make uses by default, see "https://stackoverflow.com/questions/11675070/makefile-echo-n-not-working" for a detailed explanation. In this case, it resulted in "-n" being written to env.txt and env.in even though they should be empty, which caused compilation to fail with "Your board uses a text-file environment, so must not define CONFIG_EXTRA_ENV_SETTINGS". This patch prevents the error by replacing echo -n's with touch, as they are used to create empty files in these cases.
2022-02-09dm: scsi: Add a migration deadline for scsiSimon Glass1-0/+1
Very few boards remain to be migrated: am57xx_hs_evm_usb controlcenterdc highbank ls1021atsn_qspi ls1021atsn_sdcard ls1021atwr_sdcard_ifc_SECURE_BOOT ls1046ardb_sdcard_SECURE_BOOT ls1088ardb_sdcard_qspi_SECURE_BOOT omap5_uevm pg_wcom_expu1 pg_wcom_seli8 sandbox sandbox64 sandbox_flattree sandbox_noinst sandbox_spl tools-only Addd a migration deadline for a year out. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-05Makefile: imx: Do not call arch/arm/mach-imx flash.bin generation if BINMAN ↵Marek Vasut1-1/+0
enabled Skip running arch/arm/mach-imx flash.bin generation in case BINMAN is enabled, otherwise the target in arch/arm/mach-imx/Makefile regenerates the flash.bin again and produces corrupted result. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Peng Fan <peng.fan@oss.nxp.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-31Prepare v2022.04-rc1v2022.04-rc1Tom Rini1-2/+2
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-31pylint: Adjust how the output is producedSimon Glass1-3/+4
The current Makefile rule requires there to be a 'Module' line in the pylint output, like this: ************* Module binman.fip_util This line only appears if pylint has some comments about the module. We cannot rely on it for naming. Update the code to instead use the filename as the identifier for each score, so rather than: multiplexed_log 7.49 we output: test_multiplexed_log.py 7.20 It is still easy to see which file the score relates to. In fact the new naming is nicer since the full subdirectories are shown. The avoids the problem where a module name is not produced, and the output gets out of sync. Regenerate pylint.base so we can start from the current baseline. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-28dm: serial: Add a migration deadline for serialSimon Glass1-0/+1
This probably should have been done a while back since it is a core system. Very few boards remain to be migrated. Addd a migration deadline for a year out. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25Makefile: Fake external blobs by default with binmanSimon Glass1-1/+1
This behaviour is necessary with boards where the binman description requires processing external blobs, since these may be missing. Enable it by default, so that CI is happy. Warnings indicate that a valid image is not produced, as with the --allow-missing option. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-24Makefile: Add a pylint checker to the buildSimon Glass1-1/+44
At present the Python code in U-Boot is somewhat inconsistent, with some files passing pylint quite cleanly and others not. Add a way to track progress on this clean-up, by checking that no module has got any worse as a result of changes. This can be used with 'make pylint'. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Re-generate pylint.base]
2022-01-15efi: Build the 64-bit app properlySimon Glass1-2/+2
Now that the linker crash is resolved, build the 64-bit EFI app, including all the required code. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-12timer: Add a migration messageSimon Glass1-0/+4
Some boards still use the old timer mechanism. Set a deadline for them to update to driver model. Point to some examples as well. This needs a bit of a strange rule to avoid an error on some boards. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-07-15 19:45:32 +0000