aboutsummaryrefslogtreecommitdiff
path: root/MAINTAINERS
AgeCommit message (Collapse)AuthorFilesLines
2023-04-16MAINTAINERS: Rename NAND FLASH to RAW NANDFrieder Schrempf1-7/+7
As there are other types of NAND flashes like SPI NAND, let's be more specific. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Link: https://lore.kernel.org/all/20230213094626.50957-2-frieder@fris.de/ Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2023-04-16MAINTAINERS: Add entry for SPI NAND framework and driversFrieder Schrempf1-0/+8
In [1] Michael agreed on taking patches for SPI NAND through the RAW NAND tree. Add a dedicated entry to the MAINTAINERS file which adds Michael and Dario as maintainers and myself as reviewer. [1] https://lists.denx.de/pipermail/u-boot/2023-February/508571.html Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com> Cc: Michael Nazzareno Trimarchi <michael@amarulasolutions.com> Cc: Tom Rini <trini@konsulko.com> Link: https://lore.kernel.org/all/20230213094626.50957-1-frieder@fris.de/ Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2023-04-05doc: blkmap: Add introduction and examplesTobias Waldekranz1-0/+1
Explain block maps by going through two common use-cases. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-05test: blkmap: Add test suiteTobias Waldekranz1-0/+1
Verify that: - Block maps can be created and destroyed - Mappings aren't allowed to overlap - Multiple mappings can be attached and be read/written from/to Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-05cmd: blkmap: Add blkmap commandTobias Waldekranz1-0/+1
Add a frontend for the blkmap subsystem. In addition to the common block device operations, this allows users to create and destroy devices, and map in memory and slices of other block devices. With that we support two primary use-cases: - Being able to "distro boot" from a RAM disk. I.e., from an image where the kernel is stored in /boot of some filesystem supported by U-Boot. - Accessing filesystems not located on exact partition boundaries, e.g. when a filesystem image is wrapped in an FIT image and stored in a disk partition. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-05blk: blkmap: Add basic infrastructureTobias Waldekranz1-0/+6
blkmaps are loosely modeled on Linux's device mapper subsystem. The basic idea is that you can create virtual block devices whose blocks can be backed by a plethora of sources that are user configurable. This change just adds the basic infrastructure for creating and removing blkmap devices. Subsequent changes will extend this to add support for actual mappings. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-30test: Add test for new command pci_mpsStephen Carlson1-0/+6
Adds a test for the new pci_mps command to ensure that it can set the Maximum Payload Size (MPS) of all devices to 256 bytes in the sandbox environment. Enables the pci_mps command in the sandbox environment so that this test can be run. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
2023-03-01MAINTAINERS: assign sandbox drivers to SANDBOXHeinrich Schuchardt1-0/+1
Drivers should have a maintainer. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-19doc: arch: Add document for RISC-V architectureYu Chien Peter Lin1-0/+1
This patch adds a brief introduction to the RISC-V architecture and the typical boot process used on a variety of RISC-V platforms. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-02-13i2c:aspeed:support ast2600 i2c new register mode driverRyan Chen1-0/+6
Add i2c new register mode driver to support AST2600 i2c new register mode. AST2600 i2c controller have legacy and new register mode. The new register mode have global register support 4 base clock for scl clock selection, and new clock divider mode. Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2023-02-06cmd: Add a SEAMA image load commandLinus Walleij1-0/+7
Add a command to load SEAMA (Seattle Image), a NAND flash on-flash storage format. This type of flash image is found in some D-Link routers such as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L, DIR890L and DCH-M225, as well as in WD and NEC routers on the ath79 (MIPS), Broadcom BCM53xx, and RAMIPS platforms. This U-Boot command will read and decode a SEAMA image from raw NAND flash on any platform. As it is always using big endian format for the data decoding is always necessary on platforms such as ARM. The command is needed to read a SEAMA-encoded boot image on the D-Link DIR-890L router for boot from NAND flash in an upcoming port of U-Boot to the Broadcom Northstar (BCM4709, BCM53xx) architecture. A basic test and documentation is added as well. The test must be run on a target with NAND flash support and at least one resident SEAMA image in flash. Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-02-06MAINTAINERS: m68k: Change Angelo's email addressAngelo Dureghello1-1/+1
Set my new current personal email. Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
2023-02-04drivers: video: tidss: TIDSS video driver support for AM62xNikhil M Jain1-0/+1
Added tidss video driver support which enables display on oldi panel using AM62x, it creates a simple pipeline framebuffer==>vidl1==>ovr1==>vp1==>oldi_panel and calculates clock rates for panel from panel node in device tree. To compile TIDSS when user sets CONFIG_VIDEO_TIDSS add rule in Makefile. Include tidss folder location in Kconfig. TIDSS is ported from linux kernel version 5.10.145 Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
2023-01-31Merge tag 'u-boot-amlogic-20230131' of ↵Tom Rini1-0/+1
https://source.denx.de/u-boot/custodians/u-boot-amlogic - jethub j100: add rescue boot from microSD - move meson sm command to cmd/meson and add efusedump sub-command - switch dwc2 otg to DM for G12A, GXL & AXG - Add new boards: - Odroid Go Ultra - Odroid-N2L
2023-01-27pci: Add Apple PCIe controller driverMark Kettenis1-0/+1
This driver supports the PCIe controller on the Apple M1 and M2 SoCs. The code is adapted from the Linux driver. Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2023-01-27MAINTAINERS: add include/power/ to POWERJohn Keeping1-0/+1
Add the related include files to the power MAINTAINERS entry. Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-20MAINTAINERS: add a new entry on TEE MAINTAINERSIlias Apalodimas1-0/+3
Since I do have a look on TEE patches regardless and Jens doesn't have his own tree, add myself as a co-maintainer. I'll be carrying over the TEE related patches from now on. While at it add the maintenance tree for TPM Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-01-11reboot-mode: Add NVMEM reboot modeSean Anderson1-0/+1
This adds an NVMEM reboot mode driver, similar to Linux's implementation. This allows using the same device tree binding for Linux and U-Boot in most cases. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-10arm/mach-meson: move smc commands in cmd/mesonAlexey Romanov1-0/+1
It is incorrect to keep commands in the arch/ folder. Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230110105650.54580-3-avromanov@sberdevices.ru [narmstrong: moved after cmd/sound in index.rst] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-06Merge tag 'u-boot-at91-2023.04-a' of ↵Tom Rini1-0/+1
https://source.denx.de/u-boot/custodians/u-boot-at91 into next First set of u-boot-at91 features for the 2023.04 cycle: This feature set includes the new DM-based NAND flash driver (old non-DM driver is still kept for backwards compatibility), and the move to DM NAND flash driver for sam9x60ek board. Feature set also includes devicetree alignment for sama7g5 with Linux, devicetree alignment on USB with Linux for all boards (sama5, sam9x60), chip id for sama7g5, minor configs and tweaks.
2023-01-02arm: s5p4418: dm_serial: add driver source codeStefan Bosch1-0/+1
Add dm_serial driver source code for S5P4418 SOC. Extend the "arm,pl011" driver by init of UART-clock and UART-reset. Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2022-12-08memory: atmel-ebi: add Atmel EBI (External Bus Interface) driverBalamanikandan Gunasundar1-0/+1
The EBI is used to access peripherals like NAND, SRAM, NOR etc. Add this driver to probe the nand flash controller. This is a dummy driver and not yet a complete device driver for EBI. Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2022-12-07dt-bindings: stm32mp13: add clock & reset support for STM32MP13Gabriel Fernandez1-3/+2
Add support of stm32mp13 DT bindings of clock and reset. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-12-02MAINTAINERS: Adopt SanCloud boardsWIP/2022-12-02-assorted-updatesPaul Barker1-0/+6
Signed-off-by: Paul Barker <paul.barker@sancloud.com> Cc: Marc Murphy <marc.murphy@sancloud.com>
2022-12-02MAINTAINERS: Move usb_storage from DFU to USBMarek Vasut1-1/+1
The usb_storage.c is the host-side USB mass storage device support, it is not the DFU/UMS gadget-side implementation. Fix the entry. Signed-off-by: Marek Vasut <marex@denx.de>
2022-12-02MAINTAINERS: add RaspberryPi co-maintainerMatthias Brugger1-0/+1
Peter accpeted to step up as a co-maintainer for the RPis. Reflect that in the corresponding MAINTAINERS files. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
2022-11-22soc: xilinx: versal-net: Add soc_xilinx_versal_net driverMichal Simek1-0/+1
Add soc_xilinx_versal_net driver to identify the family & revision of versal-net SoC. Add Kconfig option CONFIG_SOC_XILINX_VERSAL_NET to enable/disable this driver. To enable this driver by default, add this config to xilinx_versal_net_virt_defconfig file. This driver will be probed using platdata U_BOOT_DEVICE structure which is specified in mach-versal-net/cpu.c. Signed-off-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/613d6bcffd9070f62cf348079ed16c120f8fc56f.1668612993.git.michal.simek@amd.com
2022-11-16MAINTAINERS: add UEFI commands to EFI PAYLOADHeinrich Schuchardt1-0/+4
Add the following files to EFI PAYLOAD: - cmd/bootefi.c - cmd/efidebug.c - cmd/eficonfig.c - cmd/nvedit_efi.c Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-11-08arm: imx8mp: Initial MSC SM2S iMX8MP supportMartyn Welch1-0/+9
Add support for the MSC SM2S-IMX8PLUS SMARC Module. Tested in conjunction with the MSC SM2-MB-EP1 Mini-ITX Carrier Board. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-11-06MAINTAINERS: add arch/arm/lib/*_efi.* to EFI_PAYLOADHeinrich Schuchardt1-0/+1
The files arch/arm/lib/*_efi.* are only relevant for the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-10-31timer: sti: convert sti-timer to arm a9 global timerWilliam Zhang1-1/+1
STI timer is actually ARM Cortex A9 global timer. Convert the driver to use generic global timer name and make it consistent with Linux kernel global timer driver. This also allows any A9 based device to use this driver. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-10-31arm: bcmbca: add bcm6855 SoC support under CONFIG_ARCH_BCMBCAWilliam Zhang1-0/+1
BCM6855 is a Broadcom ARM A7 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other broadband SoC, this patch adds it under CONFIG_BCM6855 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL101 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: add bcm6858 SoC support under CONFIG_ARCH_BCMBCAWilliam Zhang1-0/+1
BCM6858 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other broadband SoC, this patch adds it under CONFIG_BCM6858 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and the original dts is updated with the one from linux next git repository. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: add bcm6856 SoC support under CONFIG_ARCH_BCMBCAWilliam Zhang1-0/+1
BCM6856 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other Broadband SoC, this patch adds it under CONFIG_BCM6856 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31MAINTAINERS: Add BCM63158 maintainer to BCMBCA entryWilliam Zhang1-0/+1
Since ARCH_BCM63158 SoC support is merged into ARCH_BCMBCA, add BCM63158 maintainer Philippe to bcmbca maintainer list. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: add bcm63158 SoC support under CONFIG_ARCH_BCMBCAWilliam Zhang1-0/+1
BCM63158 is a Broadcom B53 based DSL Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other Broadband SoC, this patch adds it under CONFIG_BCM63158 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: add bcm4908 SoC supportWilliam Zhang1-0/+1
BCM4908 is a Broadcom B53 based WLAN AP router SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux git repository so the dts and dtsi files are stripped down version of linux copies with mininum blocks needed by u-boot. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-10-31arm: bcmbca: add bcm6813 SoC supportWilliam Zhang1-0/+1
BCM6813 is a Broadcom B53 based PON and WLAN AP router SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-10-31arm: bcmbca: add bcm4912 SoC supportWilliam Zhang1-0/+1
BCM4912 is a Broadcom B53 based WLAN AP router SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-10-31arm: bcmbca: add bcm63146 SoC supportWilliam Zhang1-0/+1
BCM63146 is a Broadcom B53 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-10-31arm: bcmbca: add bcm63138 SoC supportWilliam Zhang1-0/+1
BCM63138 is an ARM A9 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory, ARM A9 global timer and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are stripped down version of linux copies with mininum blocks needed by u-boot. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. This patch applies on top of the my previous patch [1]. [1] https://lists.denx.de/pipermail/u-boot/2022-August/490570.html Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: add bcm63148 SoC supportWilliam Zhang1-0/+1
BCM63148 is an Broadcom B15 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-10-31arm: bcmbca: add bcm6756 SoC supportWilliam Zhang1-0/+1
BCM6756 is an ARM A7 based WLAN Gateway and Access Point Broadband SoC. It is part of the BCA(Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-10-31arm: bcmbca: add bcm6878 SoC supportWilliam Zhang1-0/+1
BCM6878 is an ARM A7 based PON Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux with minor fix-up that needs to be upstreamed to linux as well. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-10-31arm: bcmbca: add bcm6846 SoC supportWilliam Zhang1-0/+1
BCM6846 is an ARM A7 based PON Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux with minor fix-up that needs to be upstreamed to linux as well. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-10-31arm: bcmbca: add bcm63178 SoC supportWilliam Zhang1-2/+3
BCM63178 is an ARM A7 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux with minor fix-up that needs to be upstreamed to linux as well. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-10-30video: Drop common LCD implementationSimon Glass1-2/+0
This code is no-longer used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-11cmd: xxd: add new commandRoger Knecht1-0/+7
Add xxd command to print file content as hexdump to standard out Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Roger Knecht <rknecht@pm.me>
2022-10-11cmd: cat: add new commandRoger Knecht1-0/+5
Add cat command to print file content to standard out Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Roger Knecht <rknecht@pm.me>
2022-10-11Merge tag 'xilinx-for-v2023.01-rc1-v3' of ↵WIP/11Oct2022Tom Rini1-0/+1
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2023.01-rc1 (round 3) fpga: - Create new uclass - Get rid of FPGA_DEBUG and use logging infrastructure zynq: - Enable early EEPROM decoding - Some DT updates zynqmp: - Use OCM_BANK_0 to check config loading permission - Change config object loading in SPL - Some DT updates net: - emaclite: Enable driver for RISC-V xilinx: - Fix static checker warnings - Fix GCC12 warning sdhci: - Read PD id from DT
generated by cgit v1.1 at 2024-07-15 20:46:10 +0000