aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-06-21configs: Resync with savedefconfigTom Rini62-119/+38
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-21arm: am335x-pdu001: Remove watchdog supportFelix Brack1-1/+1
This board does not require watchdog support. Signed-off-by: Felix Brack <fb@ltec.ch>
2019-06-21lib: Makefile: build fdtdec_common.c when OF_LIBFDT selectedPeng Fan1-1/+1
When build SPL_OF_PLATDATA on i.MX6, meet issue the fdtdec_get_int not defined, however fdtdec.c will use fdtdec_get_int, so let's compile fdtdec_common.c when OF_LIBFDT selected. Since there is also SPL_OF_LIBFDT, so need to use CONFIG_$(SPL_TPL_)OF_LIBFDT. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-06-21pci: Avoid assigning PCI resources that are below 0x1000Bin Meng1-2/+3
commit b7598a43f2b4 ("[PATCH] Avoid assigning PCI resources from zero address") only moved the bus lower address to 0x1000 if the given bus start address is zero. The comment said 0x1000 is a reasonable starting value, hence we'd better apply the same adjustment when the given bus start address is below 0x1000. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2019-06-21config_distro_bootcmd: Init IDE devicesJoshua Watt1-1/+15
IDE devices are no longer automatically probed by u-boot, so it should be done by the distro boot command before attempting to boot from IDE (just like scsi and nvme) Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
2019-06-21arm64: zynqmp: Cover ultra96 dts file by MAINTAINERS fragmentMichal Simek1-0/+1
Avnet Ultra96 dts file should be also cover by MAINTAINERS fragment. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-06-21travis.yml: Add buildman support for NXP's LS1028 & LX2160Prabhakar Kushwaha1-0/+6
NXP's LS1028 and LX2160 platform build support added via buildman in travis.yml. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-21disk: part: Don't skip partition initRobert Hancock1-4/+3
blk_get_device_by_str was skipping part_init when hw partition 0 was selected because it is the default. However, this caused issues when switching to a non-zero partition and then back to partition zero, as stale data from the wrong partition was returned. Remove this optimization and call part_init regardless of the selected partition. Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
2019-06-21am335x, guardian: update the maintainer listMoses Christopher1-0/+2
Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
2019-06-21vexpress64: fix a typo of SPDX-License-IdentifierMasahiro Yamada1-2/+1
Misspelling of SPDX-License-Identifier is rather fatal than other general typos, so must be fixed. This file spells SPDX-Licence-Identifier. ^ I also moved it to the very top of the file with // comment style. Detected by grepping the source tree: $ git grep --not -e SPDX-License-Identifier --and -e SPDX- board/armltd/vexpress64/pcie.c: * SPDX-Licence-Identifier: GPL-2.0+ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2019-06-21board: Arcturus: DM: Disable drivers without DM support.Oleksandr Zhadan5-143/+379
Extra "not DM" controllers support is disabled. u-boot BSP still good enough to upgrade and run images. Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com> Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
2019-06-21cmd/led.c: fix typos in online helpAnatolij Gustschin1-1/+1
Remove square brackets around label in state command description. Fixes: ea41b15617fa ("cmd/led: check subcommand "list" instead "l"") Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-06-21rsa: reject images with unknown paddingPatrick Doyle1-1/+1
Previously we would store NULL in info->padding and jump to an illegal instruction if an unknown value for "padding" was specified in the device tree. Signed-off-by: Patrick Doyle <pdoyle@irobot.com>
2019-06-20Merge branch '2019-06-20-master-imports'Tom Rini36-75/+96
- Assorted minor fixes
2019-06-20Fix watchdog timeout setup for mt7623Shannon Barber1-7/+21
Signed-off-by: Shannon Barber <sbarber@dataspeedinc.com>
2019-06-20fw_env: Add missing write failure checkAlex Kiernan1-1/+1
If flash_write fails, whilst we propagate this up to our caller, we need to avoid swapping in the new file (if we're on a filesystem) in this case. Fixes: dbc34323796b ("tools: env: Implement atomic replace for filesystem") Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2019-06-20doc: Remove duplicated documentation directoryBreno Matheus Lima32-13/+13
Commit ad7061ed742e ("doc: Move device tree bindings documentation to doc/device-tree-bindings") moved all device tree binding documentation to doc/device-tree-bindings directory. The current U-Boot project still have two documentation directories: - doc/ - Documentation/ Move all documentation and sphinx files to doc directory so all content can be in a common place. Signed-off-by: Breno Lima <breno.lima@nxp.com>
2019-06-20aspeed/watchdog: Correct timeout valueJoel Stanley1-0/+6
The driver was using milliseconds and programming it into a register which takes ticks of the watchdog clock, which runs at 1MHz. This meant we were off by 1000 with the desired value. When 06985289d452 ("watchdog: Implement generic watchdog_reset() version") was added the aspeed board would leave the watchdog running, causing it to bite before u-boot was done. Discovered by booting in qemu: $ qemu-system-arm -M ast2500-evb -drive file=test.img,format=raw,if=mtd -nographic -no-reboot -d cpu_reset U-Boot 2019.07-rc3-00091-g2253e40caef5 (Jun 06 2019 - 16:53:23 +0930) Model: Aspeed BMC DRAM: 496 MiB WDT: Started with servicing (60s timeout) MMC: In: serial@1e784000 Out: serial@1e784000 Err: serial@1e784000 Watchdog timer expired. Fixes: 06985289d452 ("watchdog: Implement generic watchdog_reset() version") Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-06-20armv8: fix typo in LINUX_KERNEL_IMAGE_HEADER checkMian Yousaf Kaukab1-1/+1
Fixes: 8163faf952 ARMv8: add optional Linux kernel image header Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Andreas Färber <afaerber@suse.de>
2019-06-20MAINTAINERS: Update git repo linksBin Meng1-53/+53
Update all git repo links with the new gitlab ones. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Wolfgang Denk <wd@denx.de>
2019-06-20sh: Add myself as SH maintainerMarek Vasut1-0/+1
Add myself as an SH maintainer. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Tom Rini <trini@konsulko.com>
2019-06-20Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini36-43/+842
- PCIe driver change to support DM model - T2080QDS migrated to use PCIe DM model
2019-06-20Merge tag 'u-boot-stm32-20190619' of ↵Tom Rini4-8/+16
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Update STM32MP entry in MAINTAINERS - Handle correctly binding for g-tx-fifo-size for USB DWC2 driver - Fix trusted STM32MP1 defconfig with correct ethernet driver
2019-06-20Merge tag 'mmc-6-19' of https://github.com/MrVan/u-bootTom Rini1-2/+2
- Avoid HS400 mode when accessing boot partitions
2019-06-20configs: T2080QDS: Enable PCIe driverHou Zhiqiang6-0/+18
Enable the DM PCIe driver in T2080QDS defconfig. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-20powerpc: T208xQDS: Disable legacy PCIe driver when DM_PCI is enabledHou Zhiqiang1-17/+19
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-20dm: pci: add Freescale PowerPC PCIe driverHou Zhiqiang5-0/+725
Add PCIe DM driver for Freescale PowerPC PCIe controllers. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-20t2080: dts: Added PCIe DT nodesHou Zhiqiang1-0/+48
T2080 integrated 4 PCIe controllers, which is compatible with the PCI Express™ Base Specification, Revision 3.0, and this patch is to add DT node for each PCIe controller. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-20powerpc: T208xQDS: Compile the legacy PCIe routines conditionallyHou Zhiqiang1-0/+2
Compile the legacy PCIe initialization reoutines only when DM_PCI is not enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-20powerpc: mpc85xx: Update the condition to compile PCI routinesHou Zhiqiang1-1/+1
Compile the routines of mpc85xx/pci.c when both FSL_PCI_INIT and DM_PCI are not enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-20powerpc: mpc85xx: Move CONFIG_FSL_PCIE_RESET to KconfigHou Zhiqiang21-20/+21
Use the Kconfig option to select the PCIe reset errata. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-20powerpc: mpc85xx: Move CONFIG_FSL_PCIE_DISABLE_ASPM to KconfigHou Zhiqiang2-5/+8
Use the Kconfig option to select the PCIe ASPM errata. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini64-85/+1125
- LS1046AFRWY support - USB errata fix and secure boot defconfig support for LS1028A - Enabled SDHC and SATA for LX2160 - LS1046A serdes fixes - other minor fixes
2019-06-19usb: dwc2: allow peripheral mode for OTG configurationPatrick Delaunay1-1/+2
Allow device mode in DWC2 driver when device tree select the dr_mode "peripheral" or "otg". The device mode is not allowed when dr_mode = "host" in device tree. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-06-19ARM: dts: stm32mp1: remove override for g-tx-fifo-sizePatrick Delaunay1-4/+0
Remove the override for usbotg_hs on g-tx-fifo-size as the correct binding, used in the kernel device tree, is now supported in dwc2 device driver. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-06-19usb: dwc2: correctly handle binding for g-tx-fifo-sizePatrick Delaunay1-1/+13
Manage g-tx-fifo-size as a array as specify in the binding. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-06-19board/freescale/common: secure_boot: Set bootdelay to -2.Udit Agarwal1-1/+1
Uboot prompt must not be available while running secure boot. TO ensure this bootdelay must be set to -2. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19armv8: ls1046afrwy: Add support for LS1046AFRWY platformVabhav Sharma16-2/+730
LS1046AFRWY board supports LS1046A family SoCs. This patch add base support for this board. Board support's 4GB ddr memory, i2c, micro-click module,microSD card, serial console,qspi nor flash,ifc nand flash,qsgmii network interface, usb 3.0 and serdes interface to support two x1gen3 pcie interface. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19armv8: ls2088ardb: Fix MC firmware loading during SD bootWasim Khan1-6/+6
During SD boot, MC firmware and DPC are copied from SD card to DDR. Size reserved between MC and DPC firmware on DDR is 1MB. If the size of MC firmware(load address 0x80000000) is more than 1 MB then part of MC firmware will be overwritten by DPC firmware (load address 0x80100000). Fix: Update the MC/DPL/DPC firmware's DDR address as per their respective addresses in SD card. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19armv8: ls2088aqds: Fix MC firmware loading during SD bootWasim Khan1-5/+5
During SD boot, MC firmware and DPC are copied from SD card to DDR. Size reserved between MC and DPC firmware on DDR is 1MB. If the size of MC firmware(load address 0x80000000) is more than 1 MB then part of MC firmware will be overwritten by DPC firmware (load address 0x80100000). Fix: Update the MC/DPL/DPC firmware's DDR address as per their respective addresses in SD card. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19armv8: ls2088aqds: Add bootcmd for TFA bootWasim Khan1-6/+39
Add bootcmd for IFC NOR boot and SD boot. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19arm: ls1028a: define the integrated PCI bus (ECAM)Alex Marginean5-0/+18
LS1028A includes an integrated PCI bus with 11 PCI functions residing on bus 0. ECAM plus the device register space takes up 256MB of address space. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19armv8: fsl-lsch2: add clock support for the second eSDHCYinbo Zhu1-0/+2
Layerscape began to use two eSDHC controllers, for example, LS1012A. They are same IP block with same reference clock. This patch is to add clock support for the second eSDHC. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19configs/ls1046ardb_*: disable CONFIG_SPI_FLASH_USE_4K_SECTORSMaciej Pijanowski4-0/+4
With this setting enabled, the on-board QSPI cannot be properly flashed. There are no error messages, but the simple write / read / compare tests fail. This is already disabled in the qspi and tfa defconfigs for the LS1046ARDB platform. Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com> Cc: piotr.krol@3mdeb.com Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19arm: fsl-layerscape: add 0x3040 serdes1 settings for LS1046AMaciej Pijanowski1-0/+1
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com> Cc: piotr.krol@3mdeb.com Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19arm: fsl-layerscape: fix 0x3363 serdes1 settings for ls1046aMaciej Pijanowski1-1/+1
As per LS1046A hardware manual, SGMII.9 and SGMII.10 present on lane D and lane C respectively for 0x3363 protocol. So fix serdes1 settings for ls1046a. Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19configs: Unset CONFIG_SPI_FLASH_BAR, move CONFIG_FSL_QSPI to defconfigAshish Kumar15-1/+28
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19armv8: fsl-layerscape: fix config dependency for layerscape pci codeAlex Marginean1-1/+1
Fixes a link error on layerscape platform, linking fails with CONFIG_PCI set and CONFIG_PCI_LAYERSCAPE unset. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19armv8: fsl-layerscape: Change bootcmd update logicPankit Garg1-0/+5
Change bootcmd update logic when CONFIG_ENV_ADDR is not defined Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19ls1046ardb: Add CONFIG_ENV_ADDR to init env in qspi bootPankit Garg1-0/+3
Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
generated by cgit v1.1 at 2024-07-09 14:17:32 +0000