aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-10-20imx8mm-cl-iot-gate-optee: align config with KconfigStefano Babic1-1/+2
Due to missing configs, CI goes in deadlock until an OOM is tracked. Add CONFIG_SYS_LOAD_ADDR and replace CONFIG_SYS_EXTRA_OPTIONS with CONFIG_IMX_CONFIG. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Ying-Chun Liu (PaulLiu)" <paul.liu@linaro.org> CC: Fabio Estevam <festevam@denx.de>
2021-10-20kontron-sl-mx8mm: fix missing configs and deadlock in CIStefano Babic2-4/+3
Even if board can be successfuly built, CI goes in deadlock (see thread on https://www.mail-archive.com/u-boot@lists.denx.de/msg419663.html). This is caused by SYS_CONFIG set in header file and because defconfig for the board is out of sync with Kconfig. As result, buildman goes on to read from stdin until an OOM is reached. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Frieder Schrempf <frieder.schrempf@kontron.de>
2021-10-20buildman: Detect Kconfig loopsSimon Glass3-5/+55
Hex and int Kconfig options are supposed to have defaults. This is so we can configure U-Boot without having to enter particular values for the items that don't have specific values in the board's defconfig file. If this rule is not followed, then introducing a new Kconfig can produce a loop like this: Break things (BREAK_ME) [] (NEW) Error in reading or end of file. Break things (BREAK_ME) [] (NEW) Error in reading or end of file. The continues forever since buildman passes /dev/null to 'conf', and the build system just tries again. Eventually there is so much output that buildman runs out of memory. We can detect this situation by looking for a symbol (like 'BREAK_ME') which has no default (the '[]' above) and is marked as new. If this appears multiple times in the output, we know something is wrong. Add a filter function for the output which detects this situation. Allow it to return True to terminate the process. Implement this termination in cros_subprocess. With this we get a nice message: buildman --board sandbox -T0 Building current source for 1 boards (0 threads, 32 jobs per thread) sandbox: w+ sandbox +.config:66:warning: symbol value '' invalid for BREAK_ME + +Error in reading or end of file. +make[3]: *** [scripts/kconfig/Makefile:75: syncconfig] Terminated +make[2]: *** [Makefile:569: syncconfig] Terminated +make: *** [Makefile:177: sub-make] Terminated +(** did you define an int/hex Kconfig with no default? **) Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-20buildman: Write output even on fatal errorSimon Glass1-6/+6
At present buildman does not write any output (to the 'out' and 'err) files if the build terminates with a fatal error. This is to avoid adding lots of spam to the logs. However there are times when this is actually useful, such as when the build fails for an obscure reason such as a Kconfig loop. Update the logic to always write the output, so that the user gets a clue as to what is happening. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-19ARM: imx: mx5: Add altbootcmd and resets to M53MenloMarek Vasut1-4/+11
Bulletproof the default boot command with reset statements in case any command in the chain would fail. In case a failure were to happen, the board will reset, increment boot counter and retry the procedure. In case the failures persist and the boot counter reaches the bootlimit, U-Boot starts altbootcmd instead of the default bootcmd boot command. The altbootcmd swaps the default boot partition for the other boot partition, which is an identical copy or an older copy, and tries booting from that one instead. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2021-10-19ARM: imx: mx5: Enable Thumb2 build on MX53 Menlo boardMarek Vasut1-0/+1
Build U-Boot in Thumb2 mode for M53Menlo board, this makes better use of the CPU since the instruction density is higher. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2021-10-19ARM: imx: mx5: Enable BMODE command on MX53 Menlo boardMarek Vasut2-1/+5
The board can do primary/secondary boot switching, enable the bmode command. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2021-10-19board: ea: mx7ulp_com: move setting CONFIG_BOOTCOMMAND to defconfigRicardo Salveti2-5/+2
Move setting CONFIG_BOOTCOMMAND to the mx7ulp_com_defconfig file. It also allows replacing the default CONFIG_BOOTCOMMAND without code modification. Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-10-19smegw01: Select IMX_HABFabio Estevam1-0/+1
Select IMX_HAB to allow secure boot. Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-10-19smegw01: Add redundant environment supportFabio Estevam1-1/+3
Add redundant environment support as it is required by SWUpdate. While at it, place the CONFIG_ENV_OFFSET at 0x100000 to allow more headroom. Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-10-19apalis-imx6: use dynamic DDR calibrationFrancesco Dolcini2-0/+20
Enable dynamic DDR calibration to have a reliable behavior on edge temperatures conditions. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2021-10-19colibri-imx6: use dynamic DDR calibrationFrancesco Dolcini2-0/+23
Enable dynamic DDR calibration to have a reliable behavior on edge temperatures conditions. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2021-10-07mmc: sdhci-esdhc-imx: Add HS400 support for iMX7ULPOleksandr Suvorov2-3/+8
Import HS400 support for iMX7ULP B0 from the Linux kernel: 2eaf5a533afd ("mmc: sdhci-esdhc-imx: Add HS400 support for iMX7ULP") According to IC suggest, need to clear the STROBE_DLL_CTRL_RESET before any setting of STROBE_DLL_CTRL register. USDHC has register bits(bit[27~20] of register STROBE_DLL_CTRL) for slave sel value. If this register bits value is 0, it needs 256 ref_clk cycles to update slave sel value. IC suggest to set bit[27~20] to 0x4, it only need 4 ref_clk cycle to update slave sel value. This will short the lock time of slave. i.MX7ULP B0 will need more time to lock the REF and SLV, so change to add 5us delay. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
2021-10-07mmc: fsl_esdhc_imx: initialize data for imx7ulpJorge Ramirez-Ortiz1-1/+6
Import data for eSDHC driver for SoC iMX7ULP from the Linux kernel. Set supported by u-boot flags only. Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Co-developed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
2021-10-07arm64: dts: imx8mm-venice-gw7902: use imx8mm-venice-u-boot.dtsiTim Harvey1-53/+1
Use the common imx8mm-venice-u-boot.dtsi (dtb for the 'DEFAULT_DEVICE_TREE) so that it inherits things like binman. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-10-07arm64: dts: imx8mm-venice-gw7901: use imx8mm-venice-u-boot.dtsiTim Harvey1-61/+5
Use the common imx8mm-venice-u-boot.dtsi (dtb for the 'DEFAULT_DEVICE_TREE) so that it inherits things like binman. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-10-07arm64: dts: imx8mm-venice-gw700x: use imx8mm-venice-u-boot.dtsiTim Harvey1-53/+9
Use the common imx8mm-venice-u-boot.dtsi (dtb for the 'DEFAULT_DEVICE_TREE) so that it inherits things like binman. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-10-07smegw01: Pass 'mmcpart' to the kernel command lineFabio Estevam1-2/+1
When using SWUpdate, it is necessary to toggle between partitions. Use the 'mmcpart' environment variable to accomplish that. Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-10-07imx: makefile: drop the use of imx8mimage.shPeng Fan1-6/+7
After switch to use binman, no need to use the bash script to check file exsiting or not. And there is bug that the script will be executed everytime Makefile is used which is confusing people. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2021-10-07tools: imx8mimage: not abort when mmap failPeng Fan1-1/+2
When creating flash.bin, the hdmi firmware might not be copied to U-Boot source tree. Then mkimage will fail. However we are switching to binman, binman will show the message if the file not there, and create empty file per i.MX8MQ binman node. So we not fail mkimage here othersize CI will fail if hdmi firmware not copied here. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-10-07imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards ↵Frieder Schrempf17-0/+3705
(N801x) The Kontron SoM-Line i.MX8MM (N801x) by Kontron Electronics GmbH is a SoM module with an i.MX8M-Mini SoC, 1/2/4 GB LPDDR4 RAM, SPI NOR, eMMC and PMIC. The matching evaluation boards (Board-Line) have 2 Ethernets, USB 2.0, HDMI/LVDS, SD card, CAN, RS485 and much more. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
2021-10-07imx53: usbarmory: Use ethernet driver modelAndrej Rosano1-0/+1
Enable ethernet driver model as it is mandatory. Signed-off-by: Andrej Rosano <andrej.rosano@f-secure.com>
2021-10-07imx: ventana: fix USB hub resetTim Harvey7-41/+62
Remove board_ehci_hcd_init function that is not used with DM_USB and replace its functionality with device-tree configuraton that treats USB HUB RST# as a gpio enable for the usbh1 vbus regulator. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-10-07imx: ventana: update LVDS supportTim Harvey1-17/+42
Enable LVDS display detection and panel-specific configuration Make I2C based LVDS detection and configuration model specific: - not all boards support LVDS connectors; fail detection that do not support LVDS to avoid misdetecting an I2C device as a display - GPIO configuration is panel specific; use panel name where needed Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-10-07imx: ventana: fix splash logo drawingTim Harvey4-0/+10
After mxc_ipuv3 DM_VIDEO conversion showing splash image doesn't work. Fix this by adding new requirements: - splashimage env variable. - CONFIG_SPLASH_SCREEN - CONFIG_CMD_BMP Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-10-07imx: ventana: enable additional USB ether devicesTim Harvey3-0/+15
Enable additional USB ethernet devices. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-10-07imx: ventana: remove phy gpio reset from dtTim Harvey1-0/+8
We configure network phy configuration for internal delay, LED config, and clock config. If we leave the phy reset gpio defined in dt the kernel may issue a reset to the phy and break these configs. While some may be handled by a kernel phy driver, others may not (typically LED config). Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-10-07imx: ventana: add U-Boot watchdog supportTim Harvey3-3/+15
Add watchdog support for U-Boot Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-10-07imx: ventana: add part commandTim Harvey3-0/+3
Add part command for obtaining info about disk partitions. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-10-07imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards ↵Frieder Schrempf21-1/+1841
(N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2021-10-07imx: mx7: spl: fix CONFIG_SPL_MAX_SIZE definitionMatthias Schiffer1-6/+14
The CONFIG_SPL_MAX_SIZE definition did not account for all areas that are used by the boot ROM according to the manual, causing boot failures due to truncated SPL images when actually hitting this limit. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
2021-10-07misc: ocotp: Allow disabling ocotp driver in SPLMichael Scott2-1/+10
This allows removal of the OCOTP driver when SPL is enabled. Disabling OCOTP reduces SPL size efficiently. Signed-off-by: Michael Scott <mike@foundries.io> Co-developed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2021-10-07ARM: dts: imx: use generic name busOleksandr Suvorov15-27/+27
Synchronize the u-boot and kernel imx device trees, using tuned script from commit c0157bdcafa1 ("ARM: dts: imx: use generic name bus") Per devicetree specification, generic names are recommended to be used, such as bus. i.MX AIPS is an AHB - IP bridge bus, so we could use bus as node name. Script: sed -i "s/\<aips@/bus@/" arch/arm/dts/imx*.dtsi sed -i "s/\<aips@/bus@/" arch/arm/dts/vf*.dtsi sed -i "s/\<aips-bus@/bus@/" arch/arm/dts/imx*.dtsi sed -i "s/\<aips-bus@/bus@/" arch/arm/dts/vf*.dtsi Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2021-10-07mx7ulp: Update wdog disable sequenceYe Li1-8/+25
Update the mx7ulp wdog disable sequence to avoid potential reset issue in unlock or refresh sequence. Both sequence need two words write to wdog CNT register in 16 bus clocks window, if miss the window, the write will cause violation in wdog and reset the chip. Current u-boot code is using writel() function which has a DMB barrier to order the memory access. The DMB between two words write may introduce some delay in certain circumstance, causing the wdog reset due to 16 bus clock window requirement. Also, WDOG1 might have been enabled already depending on FUSE hence we need to be as close as possible to its reconfiguration timing requirement of 128 bus clock limit. This patch replaces writel() function by __raw_writel() to avoid such issue, and improve to check if watchdog is already disabled or unlocked. Signed-off-by: Ye Li <ye.li@nxp.com> Co-developed-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Co-developed-by: Ricardo Salveti <ricardo@foundries.io> Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2021-10-07rtc: rv8803: add epson,rx8803 and epson,rx8900 compatibleHeiko Thiery1-0/+2
The RX8803 and RX8900 register layouts are compatible with the one of the RV8803. So add these to the compatibles. The same compatible strings are used and approved in linux kernel. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Michael Walle <michael@walle.cc>
2021-10-07ARM: dts: imx6-apalis: enable watchdogRicardo Salveti1-0/+11
Add u-boot.dtsi specific to imx6-apalis with a watchdog enabled. If OP-TEE is loaded by SPL, it may use a watchdog to handle fails of u-boot running. Enable the watchdog in SPL to use it by OP-TEE. Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2021-10-07ARM: dts: imx8mm-verdin: Set PHY mode to RGMII-IDMarek Vasut1-1/+1
Since c6df0e2ffdc ("net: phy: micrel: add support for DLL setup on ksz9131") the Micrel PHY driver correctly configures the delay register. The Verdin PHY is RGMII-ID, so reflect that in DT, otherwise the ethernet no longer works. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Max Krummenacher <max.krummenacher@toradex.com> Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-10-07imx8qm_mek: Increase CONFIG_SYS_BOOTM_LEN to 64MBOleksandr Suvorov1-0/+2
The BSP platform LmP supports the board NXP iMX8QM MEK. The kernel size in LmP exceeds 32Mb. Increase the maximum size of an uncompressed kernel to fix the following error: Uncompressing Kernel Image Error: inflate() returned -5 Image too large: increase CONFIG_SYS_BOOTM_LEN Must RESET board to recover Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2021-10-07imx8mq_evk: Increase CONFIG_SYS_BOOTM_LEN to 64MBOleksandr Suvorov1-1/+1
The BSP platform LmP supports the board NXP iMX8M Plus EVK. The kernel size in LmP exceeds 32Mb. Increase the maximum size of an uncompressed kernel to fix the following error: Uncompressing Kernel Image Error: inflate() returned -5 Image too large: increase CONFIG_SYS_BOOTM_LEN Must RESET board to recover Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2021-10-07imx8mm_evk: Increase CONFIG_SYS_BOOTM_LEN to 64MBOleksandr Suvorov1-1/+1
The BSP platform LmP supports the board NXP iMX8M Mini EVK. The kernel size in LmP exceeds 32Mb. Increase the maximum size of an uncompressed kernel to fix the following error: Uncompressing Kernel Image Error: inflate() returned -5 Image too large: increase CONFIG_SYS_BOOTM_LEN Must RESET board to recover Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2021-10-07Kconfig: Don't use RSA_FREESCALE_EXP on MX7ULPRicardo Salveti1-2/+2
The CAAM on IMX7ULP doesn't support public key hardware acceleration (PKHA), as in other NXP parts. Disable RSA_FREESCALE_EXP for IMX7ULP too. Fixed: f4e9ff7135 ("Kconfig: Don't use RSA_FREESCALE_EXP on IMX") Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2021-10-07arm: dts: imx8mp: Generate single bootable binaryTeresa Remmet4-4/+20
binman conversion made flashing flash.bin and u-boot.itb necessary. Update binman config to create a single flash.bin image again. This updates imx8mp_evk and phyCORE-i.MX8MP as they share the same binman config. Updated also imx8mp_evk documentation. Tested on phyCORE-i.MX8MP. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-10-07arm: imx8m: imx8mm-cl-iot-gate: Add support for detect memory sizeYing-Chun Liu (PaulLiu)1-0/+25
When purchasing imx8mm-cl-iot-gate it is able to customize the memory size. It could be 1GB, 2GB and 4GB. We implement board_phys_sdram_size() to detect the memory size for usage. Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Frieder Schrempf <frieder.schrempf@kontron.de> Cc: uboot-imx <uboot-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2021-10-07tree: imx: remove old fit generator scriptAndrey Zhizhikin2-146/+0
Since derivatives are moving to binman from usage of the FIT generator script, and considering the warning introduced in f4a43d2925 ("Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR"), usage of FIT generator is discouraged. Current FIT generator also generates broken output, since commit 3f04db891a ("image: Check for unit addresses in FITs") prohibits using '@' for unit addresses but the generator script still emits the old sematics. Remove the generator script and corresponding call in Makefile, all derivatives should be migrated to binman in order to provide binary images. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-10-07imx8mm-cl-iot-gate: Split the defconfigsFabio Estevam8-14/+420
Currently imx8mm-cl-iot-gate_defconfig fails to produce a working boot binary due to the lack of fip.bin: " BINMAN all Image 'main-section' is missing external blobs and is non-functional: blob-ext Some images are invalid" To make the build process more consistent with the other i.MX8M targets, split the defconfig in two: - imx8mm-cl-iot-gate_defconfig: standard defconfig that only requires ATF / DDR firmware. - imx8mm-cl-iot-gate-optee_defconfig: "more advanced" defconfig that requires ATF / Optee / mbedtls / DDR firmware. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
2021-10-07mx7ulp: Allow to enable CONFIG_IMX_HABRicardo Salveti1-1/+1
Secure boot support on mx7ulp was added in the commit 27117b2024b6 ("mx7ulp: Add HAB boot support"). Allow selecting CONFIG_IMX_HAB for ARCH_IMX7ULP. Fixes: 27117b2024b6 ("mx7ulp: Add HAB boot support") Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-10-07imx8m: Restrict usable memory based on rom_pointer[0]Ying-Chun Liu (PaulLiu)1-3/+13
When TEE is loaded, we need to restrict the memory usage based on rom_pointer[0] Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Frieder Schrempf <frieder.schrempf@kontron.de> Cc: uboot-imx <uboot-imx@nxp.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2021-10-07arm: dts: imx8mm-venice*: remove thermal zone overridesTim Harvey2-24/+0
Remove the unnecessary thermal zone overrides. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-10-07board: gateworks: venice: update thermal temp thresholds per cpu gradeTim Harvey1-0/+18
Update the passive/critical thermal zone dt config per CPU temperature grade. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-10-07arm: dts: imx8mm-venice-gw700x: fix mp5416 pmic configTim Harvey1-19/+37
Fix various MP5416 PMIC configurations: - Update regulator names per dt-bindings - ensure values fit among valid register values - add required regulator-max-microamp property - add regulator-always-on prop Signed-off-by: Tim Harvey <tharvey@gateworks.com>
generated by cgit v1.1 at 2024-11-16 05:05:09 +0000