aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-02-08malloc: solve dead code issue in memalign()Stephen Warren1-1/+1
The recent change to memalign() caused the allocation failure detection code to be dead code; the "retry" logic is always activated under the same condition that the original failure detection code is, and also fully handles any possible failures. This patch solves the presence of dead code. Two alternatives are possible: a) Delete the now-dead test, and rely on the "retry" path to handle any allocation problems, as it does. b) Make the "retry" path fall through to the existing (currently dead) failure detection code, thus making it not-dead. (b) was chosen since it reduces the diff between U-Boot's and the upstream dlmalloc. This should make it marginally easier to import a new version of dlmalloc in the future. Reported by: Coverity Scan Fixes: 4f144a416469 ("malloc: work around some memalign fragmentation issues") Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08api: Add FreeBSD API support for MIPS platformsStanislav Galabov4-0/+60
This patch adds U-Boot API support (used by FreeBSD loader) for MIPS platforms. Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
2016-02-08.travis.yml: explicitly request sudoStephen Warren1-0/+2
Without this, builds default to using new Travis CI infra-structure which does no allow sudo. The builds need sudo in order to install the ELDK compilers. Consequently, almost all builds fail without this. I suspect that existing Travis CI users have not noticed this because their accounts or builds have been grand-fathered into backwards- compatible default settings, whereas I just set up a new build from scratch and received new default settings. Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Andreas Färber <afaerber@suse.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Heiko Schocher <hs@denx.de>
2016-02-08rpi: set ethaddr as wellLubomir Rintel1-0/+3
Let's set "ethaddr" when we get the ethernet address too, so that fdt_fixup_ethernet() sets the address in the device tree and the Linux driver can pick it up. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Tested-by: Stephen Warren <swarren@wwwdotorg.org>
2016-02-08common/memsize.c: Simplify RAM size detectionEddy Petrișor1-26/+21
The case of memory of size 0 is not that different from a memory of any other size, so we remove the duplicate code and treat the small differences when it is the case. Signed-off-by: Eddy Petrișor <eddy.petrisor@gmail.com>
2016-02-08defconfig: k2g_evm_defconfig: enable net driver modelMugunthan V N1-0/+1
enable net driver model for k2g evm as keystone_net supports driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-08ARM: dts: k2g: Add keystone net dts filesMugunthan V N3-0/+176
Add keystone net DT support for k2g evm. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-08defconfig: k2e_evm_defconfig: enable net driver modelMugunthan V N1-0/+1
enable net driver model for k2e evm as keystone_net supports driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-08defconfig: k2l_evm_defconfig: enable net driver modelMugunthan V N1-0/+1
enable net driver model for k2l evm as keystone_net supports driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-08defconfig: k2hk_evm_defconfig: enable net driver modelMugunthan V N1-0/+1
enable net driver model for k2hk evm as keystone_net supports driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-08drivers: net: keystone_net: convert driver to adopt device driver modelMugunthan V N1-40/+433
Adopt keystone_net driver to adopt device driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08drivers: net: phy: micrel: fix build errors with CONFIG_DM_ETHMugunthan V N1-2/+4
When Micrel phy is selected without CONFIG_PHY_MICREL_KSZ9031 or CONFIG_PHY_MICREL_KSZ9021 there is a build error. Fixing this by adding proper ifdefs drivers/net/phy/micrel.c:370:39: error: array type has incomplete element type static const struct ksz90x1_reg_field ksz9031_ctl_grp[] = ^ drivers/net/phy/micrel.c:372:39: error: array type has incomplete element type static const struct ksz90x1_reg_field ksz9031_clk_grp[] = ^ drivers/net/phy/micrel.c: In function ‘ksz9031_of_config’: drivers/net/phy/micrel.c:377:23: error: array type has incomplete element type struct ksz90x1_ofcfg ofcfg[] = { ^ drivers/net/phy/micrel.c:379:13: error: ‘ksz90x1_rxd_grp’ undeclared (first use in this function) { MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, 2, ksz90x1_rxd_grp, 4 }, ^ drivers/net/phy/micrel.c:379:13: note: each undeclared identifier is reported only once for each function it appears in drivers/net/phy/micrel.c:380:13: error: ‘ksz90x1_txd_grp’ undeclared (first use in this function) { MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, 2, ksz90x1_txd_grp, 4 }, ^ drivers/net/phy/micrel.c:386:3: warning: implicit declaration of function ‘ksz90x1_of_config_group’ [-Wimplicit-function-declaration] ret = ksz90x1_of_config_group(phydev, &(ofcfg[i])); ^ drivers/net/phy/micrel.c:377:23: warning: unused variable ‘ofcfg’ [-Wunused-variable] struct ksz90x1_ofcfg ofcfg[] = { ^ drivers/net/phy/micrel.c: At top level: drivers/net/phy/micrel.c:370:39: warning: ‘ksz9031_ctl_grp’ defined but not used [-Wunused-variable] static const struct ksz90x1_reg_field ksz9031_ctl_grp[] = ^ drivers/net/phy/micrel.c:372:39: warning: ‘ksz9031_clk_grp’ defined but not used [-Wunused-variable] static const struct ksz90x1_reg_field ksz9031_clk_grp[] = ^ scripts/Makefile.build:277: recipe for target 'drivers/net/phy/micrel.o' failed make[1]: *** [drivers/net/phy/micrel.o] Error 1 Makefile:1201: recipe for target 'drivers/net/phy' failed make: *** [drivers/net/phy] Error 2 make: *** Waiting for unfinished jobs.... Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-08board: ti: ks2_evm: remove board_eth_init when CONFIG_DM_ETH is definedMugunthan V N1-0/+2
remove board_eth_init when CONFIG_DM_ETH is defined Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-08OMAP3: omap3_logic: Remove YAFFS support.Adam Ford1-2/+0
UBIFS is the preferred FS, and YAFFS isn't officially included in Linux. Removing this feature reduces the code size. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08OMAP3: omap3_logic: Enable CONFIG_SMC911X_32_BITAdam Ford1-1/+1
The interface automatically converts one 32-bit word into two 16 words. The README said it is permissible to use this flag in that scenario. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08OMAP3: omap3_logic: Enable Android FastbootAdam Ford2-0/+58
Android Fastboot requires USB. The TWL4030 PMIC on omap3_logic handles USB traffic. This patch sets up the USB gadget and Android Fastboot to match what is done in the omap3_beagle project. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08dm: Update on current serial driver statusSimon Glass1-10/+4
Update the README to reflect the current status. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-08dm: pxa: serial: Drop serial_sa1100 serial driverSimon Glass2-163/+0
This does not appear to be used, and has not been converted to driver model by the deadline (doc/driver-model/serial-howto.txt). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08dm: serial: Drop serial_max3100 serial driverSimon Glass2-295/+0
This does not appear to be used, and has not been converted to driver model by the deadline (doc/driver-model/serial-howto.txt). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08dm: freescale: serial: Drop serial_imx serial driverSimon Glass2-224/+0
This does not appear to be used, and has not been converted to driver model by the deadline (doc/driver-model/serial-howto.txt). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08dm: opencores: Drop opencores_yanu serial driverSimon Glass2-243/+0
This does not appear to be used, and has not been converted to driver model by the deadline (doc/driver-model/serial-howto.txt). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08dm: freescale: Drop mxs_auart serial driverSimon Glass3-154/+0
This does not appear to be used, and has not been converted to driver model by the deadline (doc/driver-model/serial-howto.txt). Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-08OMAP3_LOGIC: Setup defconfig to enable SPL and NAND bootingAdam Ford2-0/+4
The defconfig patch will enable the the SPL and NAND settings. The update to Kconfig will allow the SPL to configured in and built. Signed-off-by: Derald D. Woods <woods.technical@gmail.com> Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08OMAP3: Enable SPL on omap3_logicAdam Ford2-124/+185
Previously, Omap3_logic assumed X-loader was present. With this patch, we can finally replace X-loader with an MLO generated by U-Boot. This requires ECC to be setup to match the Linux Kernel and the PBIAS confgured for the SD card. Signed-off-by: Derald D. Woods <woods.technical@gmail.com> Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08rpi: fix up Model B entriesLubomir Rintel1-10/+10
The P5 header was not present on "Model B" any board prior to Revision 2.0, there's no need for a separate device tree. Also, it looks like "rev2" is incorrectly used to only cover the 512MiB memory models; there also were 256MiB 2.0 boards. I don't have all of the boards to check this, I'm following this table: http://elinux.org/RPi_HardwareHistory#Board_Revision_History Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2016-02-08rpi: link to another model number info sourceStephen Warren1-0/+5
This source has been blessed by Dom Cobley at the RPi Foundation, so seems like the best source to refer to. It's a superset of and consistent with the other sources. Cc: Lubomir Rintel <lkundrak@v3.sk> Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2016-02-08hush: Add rudimentary support for PS1 and PS2Marek Vasut2-0/+18
Add trivial support for changing the U-Boot command prompt string by setting PS1 and PS2 environment variables. Only static variables are supported. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-08hush: Pull out U-Boot prompt display and read functionalityMarek Vasut1-5/+16
Pull the code which displays U-Boot prompt and reads the command line into a separate function. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-08serial: serial_stm32: move clock config from driver to boardVikas Manocha5-40/+65
This patch removes the uart clock enable from serial driver & move it in the board code. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-08test, tools: introduce tbot READMEHeiko Schocher4-0/+734
introduce a README how to use tbot for testing U-Boot and/or linux kernels. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-02-08ARM: omap3_logic: Fix pin muxingAdam Ford1-65/+313
Enhance pin muxing to enable more board features and reduce power based on Tony's device tree work. Signed-off-by: Adam Ford <aford173@gmail.com>
2016-02-08tools: env: update usage stringsAndreas Fenkart1-42/+75
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-02-08tools: env: factor out parse_common_argsAndreas Fenkart1-25/+37
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-02-08tools: env: shift optind arguments and fix argument indicesAndreas Fenkart2-43/+15
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-02-08tools: env: parse aes key / suppress flag into argument structAndreas Fenkart3-57/+53
disabled original parsing, but not yet removed since the argument indexing needs to be fixed Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-02-08tools: env: introduce setenv/printenv argument structsAndreas Fenkart2-38/+84
goal is to use getopt for all argument parsing instead of adhoc parsing in fw_getenv/fw_setenv functions Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-02-08tools: env: make parse_aes_key statelessAndreas Fenkart1-6/+6
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-02-08tools: env validate: pass values as 0-based arrayAndreas Fenkart3-12/+15
passing argv/argc can produce off-by-one errors Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-02-08Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingTom Rini330-621/+640
2016-02-08Merge branch 'master' of git://git.denx.de/u-boot-niosTom Rini1-0/+7
2016-02-06net: davinci_emac: fix NULL check after pointer dereferenceVishwas Srivastava1-1/+3
NULL check is made after the pointer dereference. This patch fixes this issue. Signed-off-by: Vishwas Srivastava <vishu.kernel@gmail.com> CC: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-02-06ppc: xilinx-ppc405-genericRicardo Ribalda1-1/+1
Fix device tree name: +(xilinx-ppc405-generic) Device Tree Source is not correctly specified. +(xilinx-ppc405-generic) Please define 'CONFIG_DEFAULT_DEVICE_TREE' +(xilinx-ppc405-generic) or build with 'DEVICE_TREE=<device_tree>' argument +(xilinx-ppc405-generic) make[2]: *** [arch/powerpc/dts/xilinx-ppc440-generic.dtb] Error 1 +(xilinx-ppc405-generic) make[1]: *** [dts] Error 2 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-06net: fix wrong initialization in davinci-emac driverVishwas Srivastava1-2/+2
emac module of the davinci platform supports only 8 tx and 8 rx channels (total 16). emac driver for davinci platform, however, while doing initialization of the dma descriptor head pointers, wrongly initializes the 16 head pointers (instead of 8) for tx dma and 16 head pointers (insted of 8) for rx dma, which is wrong. The result is, that this register initilization spills over the other registers which was not intended and is undesirable. This patch fixes this problem. Signed-off-by: Vishwas Srivastava <vishu.kernel@gmail.com> CC: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-02-06fdt: introduce fdtdec_get_child_countPeng Fan2-0/+20
Introduce fdtdec_get_child_count for get the number of subnodes of one parent node. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2016-02-06rockchip: Drop old CONFIG_VIDEO_ROTATION optionSimon Glass3-3/+0
The option was renamed to CONFIG_CONSOLE_ROTATION and Rockchip boards were not updated. However this option is is not needed by default for Rockchip since we don't need a rotated console for current boards. So just remove the old option. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-06bzlib: Try another way to fix an unused variableSimon Glass1-4/+3
Use __maybe_unused which should avoid the Coverity error. Reported-by: Coverity (CID: 134900) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-06video: test: Adjust order of file closureSimon Glass1-1/+1
Close the file earlier to hopefully fix a Coverity error. Reported-by: Coverity (CID: 134901) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-06video: Use 'int' for loop variables instead of shortSimon Glass1-1/+1
Using short doesn't save anything and is confusing when the width and height variables are ulong. This may fix Coverity CID134902 but I doubt it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-06cmd: Fix control bmp_display()Simon Glass1-2/+1
All paths should share the same return. Reported-by: Coverity (CID:134903) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-06microblaze: Correct build error in eth-uclass.cSimon Glass1-0/+2
This fixes the following error when building microblaze-generic: net/eth-uclass.c: In function 'eth_post_probe': net/eth-uclass.c:466:18: error: 'gd' undeclared (first use in this function) ops->start += gd->reloc_off; Fixes: db9391e1 ("net: Move driver-model code into its own file") Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit v1.1 at 2024-08-25 21:43:03 +0000