aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-01-08scripts: fix binutils-version.sh for 'as' without a package.Bill Pringlemeir1-1/+2
Commit 73c25753 fixed the common issue that binutil packages (tool/organization that packaged or built the bin-utils) are included in brackets and this may falsely be recognized as a version. However, some tools do not provide a 'package' and previously we add the 'Gnu assembler..' to the version. Strip out the '(package version text)' and then look for a ##.## string. Signed-off-by: Bill Pringlemeir <bpringlemeir@nbsps.com> Tested-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Hans de Goede <hdegoede@redhat.com>
2015-01-08ARM: UniPhier: add UART initialization routine for low-level debugMasahiro Yamada8-0/+128
The low-level debugging functions are useful to debug the early boot stage where the full UART driver is not available. UniPhier SoCs need to initialize the UART port 0 to use this feature. The initialization routine is called at the very entry of the lowlevel_init(). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-08ARM: UniPhier: enable output of system busMasahiro Yamada3-0/+15
For NAND boot on PH1-LD4, PH1-sLD8, and some other SoCs, the output of the system bus is disabled by default. It must be enabled by software to have access to the system bus. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-08ARM: UniPhier: fix SRAM size on support cardMasahiro Yamada1-3/+3
The max size of available memories on slot0 and slot1 is 32MB because - EA[25] signal is not output on the save-pin mode which is used PH1-LD4 or later SoCs. - EA[25] signal is not connected by the limitation (or bug?) of the PLD logic of DCC support card. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-07Kconfig: move EXPERT option under "General setup" menuMasahiro Yamada1-2/+2
Make it a sub-menu of "General setup" like Linux Kernel. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com>
2015-01-06Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini1-1/+1
2015-01-06Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini3-46/+77
2015-01-06sunxi: axp221: Fix using the wrong register address for ALDO2Hans de Goede1-1/+1
This fixes us never programming ALDO2, and programming the ALDO2 voltage into ALDo1. Reported-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-01-06spl: mmc: Fix raw boot mode (related to commit ↵Guillaume GARDET1-3/+16
4c5bbc2328a24f5e1ee990c9a9527e48e5fb3b5f) As reported by Robert Nelson, commit 4c5bbc2328a24f5e1ee990c9a9527e48e5fb3b5f may break MMC RAW boot mode. This patch fixes the check path to fix MMC Raw boot mode. Tested raw boot mode and FS boot mode on a pandaboard (rev. A3). Reported-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com> Cc: Robert Nelson <robertcnelson@gmail.com> Tested-by: Robert Nelson <robertcnelson@gmail.com>
2015-01-06MVEBUMMC : REMOVE unnecessary delay from initGerald Kerma1-2/+0
Remove unnessecary delay from mvebu_mmc_initialize Signed-off-by: Gérald Kerma <drEagle@doukki.net> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2015-01-06MVEBUMMC : CLEAN codeGerald Kerma1-20/+20
Clean mvebu_mmc_send_cmd Signed-off-by: Gérald Kerma <drEagle@doukki.net> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2015-01-06MVEBUMMC : REMOVE unnecessary delaysGerald Kerma1-3/+0
Remove delays in mvebu_mmc_set_bus and mvebu_mmc_set_clk Signed-off-by: Gérald Kerma <drEagle@doukki.net> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2015-01-06MVEBUMMC : FIX debug stringsGerald Kerma1-5/+13
Signed-off-by: Gérald Kerma <drEagle@doukki.net> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2015-01-06MVEBUMMC : Speed up access timeGerald Kerma2-17/+32
Get about 40x faster access on SHEEVAPLUG MMC Fix some SD type compatibility Changes in v3: - fix the HW_STATE (from linux mvsdio) - review delays and timeouts Changes in v2: - increase number of loops - remove initial delay Changes in v1: - review all loops, delays and timeouts Signed-off-by: Gérald Kerma <drEagle@doukki.net> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2015-01-06MVEBUMMC : Change copyright dateGerald Kerma1-1/+1
Signed-off-by: Gérald Kerma <drEagle@doukki.net> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2015-01-05spl_sata.c: Add <scsi.h>Tom Rini1-0/+1
We need <scsi.h> for scsi_scan(). Signed-off-by: Tom Rini <trini@ti.com>
2015-01-05Merge branch 'misc' of git://git.denx.de/u-boot-x86Tom Rini7-155/+41
2015-01-05cros-ec-keyboard: Synchronize DT binding from linuxSjoerd Simons5-153/+38
The ChromeOS EC keyboard is used by various different chromebooks. Peach pi being the third board in the u-boot tree to use it (snow and peach pit the other two). Rather then embedding the same big DT node in the peach-pi DT again, copy the dtsi snippit & bindings documentation from linux and include it in all 3 boards. This slightly changes the dt bindings in u-boot: * google,key-rows becomes keypad,num-rows * google,key-colums becomes keypad,num-colums * google,repeat-delay-ms and google,repeat-rate-ms are no longer used and replaced by hardcoded values (similar to tegra kbc) Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2015-01-05i2c_eeprom: include <linux/err.h> to fix build errorMasahiro Yamada1-0/+1
drivers/misc/i2c_eeprom.c fails to build unless CONFIG_FIT_SIGNATURE is defined. CC drivers/misc/i2c_eeprom.o drivers/misc/i2c_eeprom.c: In function 'i2c_eeprom_read': drivers/misc/i2c_eeprom.c:15:10: error: 'ENODEV' undeclared (first use in this function) drivers/misc/i2c_eeprom.c:15:10: note: each undeclared identifier is reported only once for each function it appears in drivers/misc/i2c_eeprom.c: In function 'i2c_eeprom_write': drivers/misc/i2c_eeprom.c:21:10: error: 'ENODEV' undeclared (first use in this function) drivers/misc/i2c_eeprom.c:22:1: warning: control reaches end of non-void function [-Wreturn-type] drivers/misc/i2c_eeprom.c: In function 'i2c_eeprom_read': drivers/misc/i2c_eeprom.c:16:1: warning: control reaches end of non-void function [-Wreturn-type] make[2]: *** [drivers/misc/i2c_eeprom.o] Error 1 make[1]: *** [drivers/misc] Error 2 make: *** [drivers] Error 2 By the way, Sandbox (enabling CONFIG_FIT_SIGNATURE) is luckily working depending on it. Sandbox includes include/asm-generic/errno.h from include/errno.h from include/u-boot/rsa-checksum.h from include/image.h from include/common.h from drivers/misc/i2c_eeprom.c Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-05dm: README: recommend u-boot.dtb to try driver-model on sandboxMasahiro Yamada1-2/+2
To enjoy driver-model on sandbox, using device tree is recommended. While we are here, change sandbox_config to sandbox_defconfig too. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2015-01-05memmove_wd: copy chunk down from big address if parameter to is larger than fromSonic Zhang1-2/+12
When watchdog is enabled, memmove_wd() always copy chunk up from small address. This damanges overlapped memory data if destination address is smaller than source address. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-05mtd: nand: omap_gpmc: fix error handlingGuido Martínez1-1/+2
"err" was an unsigned variable, causing negative error codes to turn into positive values, which are interpreted as an amount of succesfully corrected bitflips (and thus not an error). In particular, this resulted in that if the elm reports uncorrectable errors (-EBADMSG), the MTD layer (and UBI) falsely succeeded. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Reviewed-by: Stefan Roese <sr@denx.de>
2015-01-05powerpc/cm5200: migrate to generic boardDavid Büchi1-0/+5
Signed-off-by: David Buechi <david.buechi@bbv.ch>
2015-01-05doc: fix grammatical errors in READMEJeremiah Mahler1-37/+37
Fix various spelling and grammatical errors in the README. Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-05keystone: set default pci mode to root complexKaricheri, Muralidharan2-0/+34
pci ports are used as root complex in Linux. So set this as default in u-boot for keystone devices Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
2015-01-05beagle_x15: enable NFS commandFelipe Balbi1-0/+1
NFS is useful for loading zImage and dts through NFS export. It saves us from running two services for loading files over the network (tftp and nfs). Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-05omap5: cm-t54: add sata supportDmitry Lifshitz1-0/+13
Add configs required for SATA support on CM-T54 board. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
2015-01-05arm: omap: reset sata on bootDmitry Lifshitz1-0/+9
On OMAP platforms (like OMAP5) Linux kernel fails to detect a SATA device if it is used by U-Boot. It happens because U-Boot does not reset SATA controller before boot. Reset the controller on OS boot so that Linux will have a clean state to work with. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
2015-01-05OMAP5+: sata/scsi: implement scsi_bus_reset()Dmitry Lifshitz1-0/+6
Implement missing scsi_bus_reset() for SCSI subsystem commands on OMAP platforms. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
2015-01-05ahci-plat: provide a weak scsi_bus_reset() hookDmitry Lifshitz1-2/+1
This allow the platform to handle a custom reset sequence. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
2015-01-05ahci: introduce ahci_reset()Dmitry Lifshitz2-17/+31
Extract controller reset code from ahci_host_init() into separate ahci_reset(). Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
2015-01-05da850evm: Use generic board and libfdt, fix size for SPI flashPeter Howard1-2/+4
Add defines to use CONFIG_SYS_GENERIC_BOARD and CONFIG_OF_LIBFDT. Semi-separate to this: the size of the image for the da850evm has increased to the point that the size in da850evm.h and the offset for the environment in SPI flash no longer work. They are modified to account for the larger image size. Signed-off-by: Peter Howard <phoward@gme.net.au> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2015-01-05fs: fat: read: fix fat16 ls/read issuePrzemyslaw Marczak1-18/+51
The present fat implementation ignores FAT16 long name directory entries which aren't placed in a single sector. This was becouse of the buffer was always filled by the two sectors, and the loop was made also for two sectors. If some file long name entries are stored in two sectors, the we have two cases: Case 1: Both of sectors are in the buffer - all required data for long file name is in the buffer. - Read OK! Case 2: The current directory entry is placed at the end of the second buffered sector. And the next entries are placed in a sector which is not buffered yet. Then two next sectors are buffered and the mentioned entry is ignored. - Read fail! This commit fixes this issue by: - read two sectors after loop on each single is done - keep the last used sector as a first in the buffer before the read of two next The commit doesn't affects the fat32 imlementation, which works good as previous. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Mikhail Zolotaryov <lebon@lebon.org.ua> Cc: Tom Rini <trini@ti.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Simon Glass <sjg@chromium.org> Cc: Suriyan Ramasami <suriyan.r@gmail.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Wolfgang Denk <wd@denx.de> Tested-by: Simon Glass <sjg@chomium.org>
2015-01-05TI: armv7: enable UUID and PARTNishanth Menon6-10/+2
Enable UUID and partition support for scripted handling platforms with MMC and eMMC and varied partitioning schemes And remove it from headers that end up redefining it. Signed-off-by: Nishanth Menon <nm@ti.com>
2015-01-05Revert "ARM: omap4: Update sdram setting for panda rev A6"Nishanth Menon1-4/+0
This reverts commit 47a4bea6af77b01d59a410d09a4c34b2dd14cf50. Signed-off-by: Nishanth Menon <nm@ti.com>
2015-01-05ARM: OMAP4: Panda: rework DMM logicNishanth Menon2-0/+19
Part of DMM logic is reuse from commit 47a4bea6af77b01d59a410d09a4c34b2dd14cf50 ("ARM: omap4: Update sdram setting for panda rev A6") Which broke SDP4430 with ES2.3 (uses old DDR). So, to maintain support for newer DDR used in Panda ES rev B3, we should, in addition to the commit 675cc77a3ae45e8b0ec17128563264d4a509f628 ("ARM:OMAP4+: panda-es: Support Rev B3 Elpida DDR2 RAM"), DDR timings, also do DMM configuration specific to Panda. Signed-off-by: Nishanth Menon <nm@ti.com>
2015-01-05omap-common/hwinit-common.c: timer_init() doesn't need to touch gdTom Rini1-5/+0
The gd will be cleared at first so we don't need to set arch.tbl to 0. In addition, the checks later against lastinc also work fine with an initial value of 0 here. This also brings us in line with sunxi code for example. Signed-off-by: Tom Rini <trini@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-01-05am33xx: Drop timer_init call from s_initTom Rini1-1/+0
In both SPL and non-SPL cases we will make a call to timer_init() early on and do not need to call it again within s_init(). Signed-off-by: Tom Rini <trini@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-01-05socfpga: Drop redundant save_boot_paramsTom Rini1-7/+0
The save_boot_params function here is the same as the default weak one from arch/arm/cpu/armv7/start.S, drop. Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com> Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@ti.com> Reviewed-by: Marek Vasut <marex@denx.de>
2015-01-05cmd_fdt: fix working_fdt is set to wrong valueHua Yanghao1-1/+1
Instead of setting working_fdt to map_sysmem(addr) (e.g. blob), it should be set to addr directly as inside set_working_fdt_addr it uses map_sysmem(addr) again. To test: ./u-boot -d dts/dt.bin , then issue: fdt addr 0x100, fdt print will then cause an segmentation fault. After this fix fdt print is functional.
2015-01-05ARM: bootm: do not add PSCI to fdt when booting in secure mode.Ian Campbell3-2/+5
Commit 8bc347e2ec17 "ARM: bootm: Allow booting in secure mode on hyp capable systems" added the capability to select nonsec vs sec mode boot via an environment var. There is a subtle gotcha with this functionality, which is that the PSCI nodes are still created in the fdt (via armv7_update_dt->fdt_psci) even when booting in secure mode. Which means that if the kernel is PSCI aware then it will fail to boot because it will try and do PSCI from secure world, which won't work. This likely didn't get noticed before because the original purpose was to support booting the legacy linux-sunxi kernels which don't understand PSCI. To fix expose boot_nonsec (renaming with armv7_ prefix) outside of bootm.c and use from the virt-dt code. As well as avoiding the creation of the PSCI nodes we should also avoid reserving the secure RAM, so do so. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
2015-01-05devkit8000: convert to use generic board codeAnthoine Bourgeois1-0/+1
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
2015-01-05cmd_bdinfo: check for CONFIG_ARC instead of CONFIG_ARC700Alexey Brodkin1-1/+1
For all flavours of ARC we execute the same code in "bdinfo" so we may safely check for CONFIG_ARC. This is especially important since we're about to add more types of ARC so existing check won't work in all cases. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Tom Rini <trini@ti.com>
2015-01-05arm: omap3: cm-t35: convert to generic boardNikita Kiryanov1-0/+1
Convert cm-t35 to generic board. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@ti.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-01-05powerpc: mpc824x: remove MPC824X cpu supportMasahiro Yamada105-16821/+12
All the MPC824X boards are still non-generic boards: A3000, CPC45, CU824, eXalion, MVBLUE, MUSENKI, Sandpoint824x, utx8245 Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Josef Wagner <Wagner@Microsys.de> Cc: Torsten Demke <torsten.demke@fci.com> Cc: Jim Thompson <jim@musenki.com> Cc: Greg Allen <gallen@arlut.utexas.edu>
2015-01-05mpc8260: remove atc board supportMasahiro Yamada13-2388/+1
These boards are still non-generic boards. drivers/rtc/ds12887.c should also be removed because it can not be built without CONFIG_ATC. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
2015-01-05mpc8260: remove CPU86, CPU87 board supportMasahiro Yamada20-3270/+2
These boards are still non-generic boards. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
2015-01-05mpc8260: remove ep82xxm board supportMasahiro Yamada8-687/+1
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-05mpc8260: remove gw8260 board supportMasahiro Yamada9-1971/+1
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Oliver Brown <obrown@adventnetworks.com>
2015-01-05mpc8260: remove IPHASE4539 board supportMasahiro Yamada10-1600/+1
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Grandegger <wg@denx.de>
generated by cgit v1.1 at 2024-07-31 15:59:38 +0000