aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-01-16arm: socfpga: set the fpga global bit to disable HPS to FPGA signalsDinh Nguyen1-1/+1
We should be setting the FPGA Interface Group global bit that will correctly disable all interfaces between the FPGA and HPS. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2016-01-16ddr: altera: Init the rule ID in debug codeMarek Vasut1-0/+1
Init the rule ID, otherwise the debug code will always dump the protection settings entry 0. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com>
2016-01-15Merge git://git.denx.de/u-boot-rockchipTom Rini3-1/+15
2016-01-15eth-raw-os.c: Add cast to bind(2) callTom Rini1-1/+2
With more recent gcc versions we otherwise get an error like: note: expected 'const struct sockaddr *' but argument is of type 'struct sockaddr_in *' and the common solution here is to cast, rather than re-work the code. Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-15x86: Fix board init breakageSimon Glass1-1/+1
Commit ecc30663 ("Fix board init code to respect the C runtime environment") breaks x86. This was mentioned on https://patchwork.ozlabs.org/patch/548644 but not addressed. Correct it so that x86 boards boot again. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-15dm: pci: Avoid a memory leak when allocating the ROMSimon Glass1-12/+33
Adjust pci_rom_load() to return an indication of whether it allocated memory or not. Adjust the caller to free it. This fixes a memory leak when PCI_VGA_RAM_IMAGE_START is not used. Reported-by: Coverity (CID: 134194) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-15dm: pci: Add a 'fall through' commentSimon Glass1-0/+1
For this class it is intended to set up the PCI device, so add a comment to indicate this. This avoids a coverity warning. Reported-by: Coverity (CID: 134194) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-15dm: spi_flash: Allow the uclass to work without printf()Simon Glass1-1/+7
For SPL we don't really need sprintf() and with tiny-printf this is not available. Allow this to be dropped in SPL when using tiny-printf. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-15mmc: rockchip: the non-removable property must point to emmchuang lin1-0/+2
the non-removable property point to sdcard before, it is wrong, it must point to emmc, correct it. Signed-off-by: Lin Huang <hl@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-01-15MAINTAINERS: add entry for RockchipMasahiro Yamada1-0/+6
Rockchip has its own git repository maintained by Simon. Document this. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-14Fix GCC format-security errors and convert sprintfs.Ben Whitten53-72/+75
With format-security errors turned on, GCC picks up the use of sprintf with a format parameter not being a string literal. Simple uses of sprintf are also converted to use strcpy. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Acked-by: Wolfgang Denk <wd@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-14Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini31-105/+3143
2016-01-14arm: initialize gd for AArch64Stephen Warren1-0/+2
Commit adc421e4cee8 "arm: move gd handling outside of C code" removed the call to arch_setup_gd() on ARM and replaced it with assembly code in crt0.S. However, AArch64 uses a different startup file, and the same change was not made to it. This leaves gd uninitialized on AArch64, which typically leads to hangs or crashes. This change fixes that. Fixes: adc421e4cee8 ("arm: move gd handling outside of C code") Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-01-14Merge git://www.denx.de/git/u-boot-marvellTom Rini75-719/+4047
Conflicts: arch/arm/Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-14MAINTAINERS: Update Marvell custodianshipStefan Roese1-1/+3
Add myself as custodian for the Marvell git repository. Additionally, add the mach-mvebu directory to the list of files / directories. And add Armada XP & Armada 38x to the title (not only kirkwood). Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Tom Rini <trini@konsulko.com> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Acked-by: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14mvebu: ds414: Implement Synology specific command setPhil Sutter2-0/+234
Synology keeps per item configuration in a dedicated 'partition' in SPI flash, namely the one named 'vendor' in DTS file. It contains the two NICs MAC addresses as well as the item's serial number. I didn't find a way to have this information extracted automatically, therefore implemented 'syno populate_env' command which extracts the three values and puts them into environment. To make things permanent though, one has to 'saveenv'. Another command is 'syno clk_gate', which allows to change the clock gating which is done in DS414 board file. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-14mvebu: Support Synology DS414Phil Sutter9-2/+731
This adds support for the MV78230 based DS414 NAS by Synology. The relevant bits have been extracted from the 'synogpl-5004-armadaxp' package Synology kindly published, garnished with a fair amount of trial-and-error. Sadly, support is far from perfect. The major parts I have failed in are SATA and XHCI support. Details about these and some other things follow: Device Tree ----------- The device tree file armada-xp-synology-ds414.dts has been copied from Linux and enhanced by recent U-Boot specific changes to armada-xp-gp.dts. SATA Support ------------ There is a Marvell 88SX7042 controller attached to PCIe which is supported by Linux's sata_mv driver but sadly not U-Boot's sata_mv. I'm not sure if extending the latter to support PCI devices is worth the effort at all. Porting sata_mv from Linux exceeded my brain's capacities. :( XHCI Support ------------ There is an EtronTech EJ168A XHCI controller attached to PCIe which drives the two rear USB3 ports. After a bit of playing around I managed to get it recognized by xhci-pci, but never was able to access any devices attached to it. Enabling it in ds414 board config shows that it does not respond to commands for whatever reason. The (somewhat) bright side to it is that it is not even supported in Synology's customized U-Boot, but that also means nowhere to steal the relevant bits from. EHCI Support ------------ This seems functional after issuing 'usb start'. At least it detects USB storage devices, and IIRC reading from them was OK. OTOH Linux fails to register the controller if 'usb start' wasn't given before in U-Boot. According to Synology sources, this board seems to support USB device (gadget?) mode. Though I didn't play around with it. PCIe Support ------------ This is fine, but trying to gate the clocks of unused lanes will hang PCI enum. In addition to that, pci_mvebu seems not to support DM_PCI. DDR3 Training ------------- Marvell/Synology uses eight PUPs instead of four. Does not look like this is meant to be customized in mainline U-Boot at all. OTOH I have no idea what a "PUP" actually is. PEX Init -------- Synology uses different values than mainline U-Boot with this patch: pex_max_unit_get returns 2, pex_max_if_get returns 7 and max_serdes_lines is set to 7. Not changing this seems to not have an impact, although I'm not entirely sure it does not cause issues I am not aware of. Static Environment ------------------ This allows to boot stock Synology firmware at least. In order to be a little more flexible when it comes to booting custom kernels, do not only load zImage partition, but also rd.gz into memory. This way it is possible to use about 7MB for kernel with piggyback initramfs. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-14mvebu: Add rudimental MV78230 supportPhil Sutter3-6/+17
This adds basic support for Marvell's MV78230 SoC which belongs to the Armada XP series. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-14mvebu: axp: Rename MV_DDR_32BIT to CONFIG_DDR_32BITPhil Sutter2-11/+11
This should make it clear that this symbol is meant to be defined by board headers. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-14mvebu: Introduce kconfig symbols for SoC variantsPhil Sutter3-6/+20
This patch adds intermediate kconfig symbols which select their SoC family. Boards then select them instead of the family symbol directly. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-14mvebu: axp: refactor board_sat_r_get() and callerPhil Sutter1-31/+15
Instead of calling board_sat_r_get() only for those boards providing the satr11 value via I2C, call it for all boards and return static values for those not using I2C. In addition to that, make this a weak function to allow for board code to override it. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-14drivers/pci/pci_mvebu: Fix for boards with X4 lanesPhil Sutter2-0/+16
Armada XP has support for X4 lanes, boards specify this in their serdes_cfg. During PEX init in high_speed_env_lib.c, the configuration is stored in GEN_PURP_RES_2_REG. When enumerating PEX, subsequent interfaces of an X4 lane must be skipped. Otherwise the enumeration hangs up the board. The way this is implemented here is not exactly beautiful, but it mimics how Marvell's BSP does it. Alternatively we could get the information using board_serdes_cfg_get(), but that won't lead to clean code, either. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-14axp: Fix debugging support in DDR3 write levelingPhil Sutter1-2/+2
If MV_DEBUG_WL is defined, DEBUG_WL_S and DEBUG_WL_D macros are missing. In addition to that, get rid of debug output printing non-existent counter variable. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-14README: Review the u-boot porting guide listPhil Sutter1-7/+4
* There is no boards.cfg anymore, so drop (1). * Creating flash.c and u-boot.lds seems not mandatory as well. * Adjusting the enumerators for the above implicitly fixed for double items numbered (3). Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-14drivers/pci: Fix for debug builds without CONFIG_PCI_ENUM_ONLYPhil Sutter1-1/+1
The debug printing references bar_res, which exists only if CONFIG_PCI_ENUM_ONLY is not defined. Therefore move it into the ifdef'd area. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-14arm: mvebu: Add runtime detection of UART (xmodem) boot-modeStefan Roese6-32/+36
This patch adds runtime detection of the Marvell UART boot-mode (xmodem protocol). If this boot-mode is detected, SPL will return to the BootROM to continue the UART booting. With this patch its now possible, to generate a U-Boot image that can be booted either from the strapped boot-device (e.g. SPI NOR, MMC, etc) or via the xmodem protocol from the UART. In the UART case, the kwboot tool will dynamically insert the UART boot-device type into the image. And also patch the load address in the header, so that the mkimage header will be skipped (as its not expected by the Marvell BootROM). This simplifies the development for Armada XP / 38x based boards. As no special images need to be generated by selecting the MVEBU_BOOTROM_UARTBOOT Kconfig option. Since the Kconfig option MVEBU_BOOTROM_UARTBOOT is not needed any more, its now completely removed. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Phil Sutter <phil@nwl.cc> Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
2016-01-14arm: mvebu: Add runtime boot-device detectionStefan Roese2-7/+39
This patch adds runtime boot-device detection to SPL U-Boot. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Phil Sutter <phil@nwl.cc> Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
2016-01-14arm: mvebu: Make local structs static constStefan Roese1-2/+2
As these structs are local only and const, declare them accordingly. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Phil Sutter <phil@nwl.cc> Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
2016-01-14arm: mvebu: Move SAR register defines into headerStefan Roese2-16/+24
This is preparation for the runtime bootmode detection in spl.c. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Phil Sutter <phil@nwl.cc> Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
2016-01-14arm: mvebu: Remove leftover MakefileStefan Roese1-14/+0
This Makefile was not used since quite some time. I only missed to remove it in the move to mach-mvebu. So lets remove it now so that the mvebu-common directory is really removed completely. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14arm: mvebu: Move SoC selection (A38X vs AXP) into KconfigStefan Roese15-38/+33
Until now, the SoC selection for the ARCH_MVEBU platforms has been done in the config header. Using CONFIG_ARMADA_XP in a non-clear way. As it needed to get selected for AXP and A38x based boards. This patch now changes this to move the SoC selection to Kconfig. And also uses CONFIG_ARCH_MVEBU as a common define for both AXP and A38x. This makes things a bit clearer - especially for new board additions. Additionally the defines CONFIG_SYS_MVEBU_DDR_AXP and CONFIG_SYS_MVEBU_DDR_A38X are replaced with the already available CONFIG_ARMADA_38X and CONFIG_ARMADA_XP. And CONFIG_DDR3 is removed, as its not referenced anywhere. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14arm: mvebu: Consolidate board Kconfig options into one fileStefan Roese6-49/+17
Merging all the board specific Kconfig options into the main Kconfig file for mach-mvebu makes things easier to maintain. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14arm: mvebu: Print CPU and SDRAM frequency upon startupStefan Roese3-8/+113
With this patch, the CPU and the DDR frequencies will get printed in the U-Boot startup messages. Resulting in such a log: U-Boot 2016.01-rc2-00188-gb8eeaec-dirty (Dec 21 2015 - 12:32:35 +0100) SoC: MV78460-B0 at 1600 MHz I2C: ready DRAM: 4 GiB (800 MHz, ECC not enabled) ... Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14arm: mvebu: Make serdes setup on Armada XP less noisyStefan Roese1-7/+7
Change some of the PEX configuration output lines from always output to only ouput upon specific debug enabling. This changes the SPL output from: U-Boot SPL 2016.01-rc2-00037-g9353a7f (Dec 10 2015 - 10:27:42) High speed PHY - Version: 2.1.5 (COM-PHY-V20) Update Device ID PEX0782611ab Update Device ID PEX1782611ab Update Device ID PEX2782611ab Update Device ID PEX3782611ab Update Device ID PEX8782611ab Update PEX Device ID 0x78260 High speed PHY - Ended Successfully DDR3 Training Sequence - Ver 5.7.4 DDR3 Training Sequence - Ended Successfully to: U-Boot SPL 2016.01-rc2-00037-g9353a7f-dirty (Dec 10 2015 - 10:32:04) High speed PHY - Version: 2.1.5 (COM-PHY-V20) High speed PHY - Ended Successfully DDR3 Training Sequence - Ver 5.7.4 DDR3 Training Sequence - Ended Successfully Resulting in a little faster bootup time. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14arm: mvebu: Don't include "netdev.h" in cpu.cStefan Roese1-1/+0
This is not needed any more since the switch to DM / DTS network initialization on MVEBU. Lets remove it, as it otherwise leads to compilation warning when CONFIG_NET is not enabled. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14arm: mvebu: Make ECC support configurable on Armada XPStefan Roese4-0/+10
Currently, ECC support is enabled for all Armada XP boards. So the DDR3 driver tries to configure the controller with ECC support, even on boards without ECC. This patch makes this ECC optional which now can be configured on a board-per-board basis. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Phil Sutter <phil@nwl.cc>
2016-01-14arm: mvebu: Add support for MV78260Stefan Roese3-5/+29
This patch adds support for the dual core Armada XP variant, the MV78260. It has some minor differences to the 4-core MV78460, e.g. only 12 serdes lanes. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Phil Sutter <phil@nwl.cc>
2016-01-14arm: mvebu: Don't use 0 as board ID as its used for the custom boardsStefan Roese1-1/+1
Using board ID 0 is reserved for the non-Marvell "custom" boards. So move the board ID's to reflect this. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Phil Sutter <phil@nwl.cc>
2016-01-14arm: mvebu: Simplify code in setup_usb_phys() a bitStefan Roese1-5/+5
Use the clrbits() / setbits() functions instead of clrsetbits() when bit are only cleared or set. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14arm: mvebu: Don't disable cache at startup on Armada XP at allStefan Roese1-12/+13
This patch leaces the cache configuration untouched for the AXP in the setup done by the BootROM. Resulting in the cache still being enabled at the startup of U-Boot. This leads to a slightly faster boot to the U-Boot prompt (or Linux of course). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14arm: mvebu: Remove SYS_MALLOC_CLEAR_ON_INIT from DB-MV784MP-GP AXP boardStefan Roese1-0/+1
By removing CONFIG_SYS_MALLOC_CLEAR_ON_INIT, the bootup time is a bit faster. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14arm: mvebu: Don't call arch_cpu_init() from SPL at allStefan Roese3-21/+8
This patch removes the call to arch_cpu_init() in the SPL U-Boot version. As SPL does not need all the configuration done in this function. And also does not need the reconfiguration of the internal register address to 0xf1000000. This will be done by the main U-Boot later on. This also fixes a problem with the timer not beeing initialized on AXP, as needed for the mdelay in the setup_usb_phys(). This will now only be called once in main U-Boot. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14arm: mvebu: Add v7_outer_cache_disable function for AXP & A38xStefan Roese1-0/+8
Add functionality to correctly disable the L2 cache on the Armada XP and 38x platforms. Without this, booting into Linux on ClearFog (A38x) results in a hangup without any output on the serial console at all. Even with earlyprintk enabled. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14arm: mvebu: Enable L2 cache on Armada XPStefan Roese1-9/+25
Until now, the L2 cache was never enabled again in U-Boot. To get even better performance (bootup time), lets enable the L2 cache in U-Boot. This code was taken from the Linux kernel. A performance gain was measured on the DB-MV784MP-GP board by testing with tftpboot and sata commands. This patch also cleans up the L2 cache related code. And makes sure that the L2 cache is only disabled once. Please note that A38x still runs with L2 cache disabled. And needs to be enabled for this SoC in a separate patch if needed or desired. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14arm: mvebu: db-mv784mp-gp: Enable cache commandStefan Roese1-0/+1
Th cache command can be useful sometimes. So lets enable it on the AXP eval board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14arm: mvebu: db-mv784mp-gp: Enable common file-system supportStefan Roese1-0/+7
This patch adds the common FS options to the Marvell AXP eval board. This includes EXT2, EXT4, FAT and VFAT. And of course the generic FS commands. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14arm: mvebu: db-mv784mp-gp: Switch from IDE to SATA supportStefan Roese1-27/+7
Enable the newly introduced SATA driver for the Marvell AXP with DMA support instead of the PIO-only IDE driver. This increases the transfer speed. And is also more in-line with the Armada 38x ports, which also use a SATA driver (AHCI) and the "sata" U-Boot commands. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14sata: Add SATA driver with DMA support for Marvell Kirkwood and Armada XPTor Krill2-0/+1046
This patch adds a new SATA driver for the Marvell Kirkwood and Armada 370 / XP SoC's. This driver supports the SATA controller of some Mavell SoC's. Here a (most likely incomplete) list of the supported SoC's: - Kirkwood - Armada 370 - Armada XP This driver implementation is an alternative to the already available driver via the "ide" commands interface (drivers/block/mvsata_ide.c). But this driver only supports PIO mode and as this new driver also supports transfer via DMA, its much faster. Please note, that the newer SoC's (e.g. Armada 38x) are not supported by this driver. As they have an AHCI compatible SATA controller integrated. The original version of this driver was sent by Tor Krill to the U-Boot list a few years ago. Here the link: http://lists.denx.de/pipermail/u-boot/2010-June/073147.html Changes by Stefan: - Coding-style cleanup - Support for Armada XP added - MBUS window setup added - D-cache flush and invalidation added - works with dcache enabled on Armada XP - Removed mdelay() from ata_wait_register() and add timer based timeout detection to speed up the transfer Signed-off-by: Tor Krill <tor@excito.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Tom Rini <trini@konsulko.com>
2016-01-14arm: mvebu: Add SolidRun ClearFog Armada 38x initial supportStefan Roese12-0/+929
This patch adds basic support for the SolidRun ClearFog Armada 38x based board to mainline U-Boot. Supported interfaces / devices are: - DDR3 - UART - MMC - Ethernet port 0 (connected to dedicated PHY) - I2C The included DT source was taken from Russell King's ftp server: http://www.home.arm.linux.org.uk/~rmk/clearfog/ With only minor modifications, like the addition of some aliases and the "u-boot,dm-pre-reloc" property. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Rabeeh Khoury <rabeeh@solid-run.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14arm: mvebu: Move some defines to common include fileStefan Roese4-11/+6
This patch moves some config options to the mvebu common include file. Making it easier to not forget these defines for new boards. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
generated by cgit v1.1 at 2024-10-11 18:57:57 +0000