aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-01-21arm: mvebu: dts: Fix Turris Mox device treeMarek Behún1-1/+11
DTC issues a warning because #address-cells and #size-cells properties are not set in the mdio node. Also add ethernet1 alias. Also add RTC node. Also fix USB3 regulator startup delay time. Also fix PCI Express SERDES speed to 5 GHz (this is only cosmetic, the speed value is not used byt the comphy driver for PCI Express, but should be 5 GHz nonetheless). Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21arm: mvebu: turris_mox: Check and configure modulesMarek Behún2-1/+244
Check if Mox modules are connected in supported mode, then configure the MDIO addresses of switch modules. Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21arm: mvebu: turris_mox: Change SERDES map depending on module topologyMarek Behún1-0/+33
When SFP module is connected directly to CPU module we want the SGMII lane speed at 1.25 Gbps. This is a temporary solution till there is a comphy driver in the kernel capable of changing SGMII speed at runtime. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21arm: mvebu: turris_mox: Cosmetic restructurizationMarek Behún1-47/+89
Restructure the board initialization source. Remove the module_topology environment variable since it won't be needed. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21ARM: mvebu: sync Armada-38x dts with Linux 4.20Chris Packham6-289/+237
Sync the Armada-38x device tree files with Linux 4.20-rc5. The changes not taken are new compatible strings for the uart and nand flash controller. The nand binding is best updated if/when the mtd/nand infrastructure is updated. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21mpc83xx: Add support for -msingle-pic-baseJoakim Tjernlund2-0/+4
-msingle-pic-base is a new gcc(from 4.6) option for ppc and it reduces the size of my u-boot with about 4 KB. While at it, add -fno-jump-tables too to save a few more bytes. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Reviewed-by: Mario Six <mario.six@gdsys.cc> Tested-by: Mario Six <mario.six@gdsys.cc> (on MPC8308)
2019-01-19Kconfig: Migrate BOUNCE_BUFFERPhilipp Tomsich144-67/+132
The bounce buffer is used by a few drivers (most of the MMC drivers) to overcome limitations in their respective DMA implementation. This moves the configuration to Kconfig and makes it user-selectable (even though it will be a required feature to make those drivers work): the expected usage is for drivers depending on this to 'select' it unconditionally from their respective Kconfig (see follow-up patches). This commit includes a full migration using moveconfig.py to ensure that each commit compiles. To ensure bisectability we update dependencies of various drivers to now select BOUNCE_BUFFER when needed. [trini: Squash all patches to ensure bisectability] Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br> [dw_mmc portion] Reviewed-by: Fabio Estevam <festevam@gmail.com> [mxsmmc portion] Reviewed-by: Simon Glass <sjg@chromium.org> [tegra portion]
2019-01-19configs: Resync with savedefconfigTom Rini16-77/+35
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-18Merge tag 'fsl-qoriq-for-v2019.04-rc1' of git://git.denx.de/u-boot-fsl-qoriqTom Rini48-74/+1420
Add TFA boot flow for more boards Add TFA boot defconfig for ls1088a and ls2088a. Add dts fixup for PCIe endpoint and root complex.
2019-01-18Merge branch '2019-01-18-master-imports'Tom Rini33-313/+91
- Bugfix for SPI environment optimization - Spelling fixes - Remove some defconfigs per various maintainers - Minor db410, bananapi r2 fixes - Bump QEMU to v3.1.0 for most platforms
2019-01-18env: sf: fix environment in SPI NORHeiko Schocher1-1/+1
commit 9a9d66f5eff0 ("env: add spi_flash_read_env function") breaks Environment functionality, as it reads only until 2 \0 are found, but fills the buffer with 0x0 instead 0xff which leads in an incorrect crc sum. Fix: init the read buffer with 0xff instead 0x00 Signed-off-by: Heiko Schocher <hs@denx.de>
2019-01-18arm: dts: am335x-pdu001: Sync with Linux 5.0-rc2Felix Brack1-8/+17
This patch synchronizes the PDU001 board DTS file with the one used by Linux 5.0-rc2. Signed-off-by: Felix Brack <fb@ltec.ch>
2019-01-18configs: Remove am335x_boneblack_defconfigFaiz Abbas1-50/+0
The am335x_evm_defconfig supports all am335x_boneblack variants. Remove the redundant am335x_boneblack_defconfig. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-18arm: am335x-pdu001: Remove SPI supportFelix Brack1-1/+0
On this board SPI is only used to configure the SoC driving the LC TFT display which is not used in U-Boot. Hence remove SPI support. Signed-off-by: Felix Brack <fb@ltec.ch>
2019-01-18cmd: mtd: fix compilation warning for help when SYS_LONGHELP=nQuentin Schulz1-3/+2
cmd/mtd.c:447:13: warning: ‘mtd_help_text’ defined but not used [-Wunused-variable] static char mtd_help_text[] = ^~~~~~~~~~~~~ When SYS_LONGHELP is not defined. After looking at how other commands work, we should surround the whole help text (even its declaration) with an #ifdef CONFIG_SYS_LONGHELP, since it's compiled out when calling _CMD_HELP[1] on the help text variable argument to U_BOOT_CMD. [1] https://elixir.bootlin.com/u-boot/latest/source/include/command.h#L181 Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-01-18travis: Switch QEMU to 3.1.0 versionMichal Simek1-1/+2
Vexpress ca15_tc2 is failing with 3.1.0 because of QEMU issue. When this patch is applied https://patchwork.kernel.org/patch/10754401/ Vexpress can be also turn to newer QEMU version. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-18travis: Setup QEMU_VERSION as variableMichal Simek1-1/+2
This change enables setting up specific Qemu version or sha1 for new targets which are added after (current) v3.0.0 version. This changes is preparation step for adding new Xilinx Versal Virt platform which was merge after v3.0.0. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-18travis: Break up the NXP Layerscape jobs moreTom Rini1-8/+14
The single job for all Layerscape 10xx platforms is close to, and sometimes exceeds the time limit for a single job configuration. Break this down into jobs for LS101x, LS104x and LS108x instead. While in here, in the name portion of these jobs, refer to them as NXP for ARM and not Freescale as they've been NXP for quite some time. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-18configs: Remove am43xx_evm_ethboot_defconfigVignesh R2-65/+0
am43xx_evm_ethboot_defconfig is not being actively used and has not been moved to DM or DT. Also, ethboot cannot be tested on AM43xx EVM as such due EVM limitations. Therefore delete it. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-18configs: Remove unused am335x_evm defconfigsVignesh R4-151/+0
These defconfigs don't seem be actively used any more, and have not been moved to adapt DM or DT. Therefore delete them. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-18configs: am335x_evm: Enable DM_SPI and DM_SPI_FLASHVignesh R3-0/+6
Enable DM_SPI and DM_SPI_FLASH for actively used defconfigs for am335x_evm. Signed-off-by: Vignesh R <vigneshr@ti.com>
2019-01-18adding saveenv-command for bananapi r2Frank Wunderlich3-0/+23
bananapi r2 can be booted from sd-card and emmc saving the environment have to choose the storage from which the device has booted also the offset is set to 1MB to make sure env is written to block "user data area" between uboot and first partition https://www.fw-web.de/dokuwiki/lib/exe/fetch.php?cache=&media=bpi-r2:boot-structure.png Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2019-01-18mkimage: fixup CONFIG_FIT_EXTERNAL_OFFSETPatrick Wildt1-1/+1
The last parameter is expected to be the imagefile. Since -E is a flag having the output name before -p will make mkimage ignore the external offset option. Signed-off-by: Patrick Wildt <patrick@blueri.se>
2019-01-18lib: Kconfig: spelling fixesChris Packham1-2/+2
Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-18video: Kconfig: spelling fixesChris Packham1-1/+1
Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-01-18pinctrl: Kconfig: spelling fixesChris Packham1-1/+1
Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-18i2c: Kconfig: spelling fixesChris Packham1-4/+4
Signed-off-by: Chris Packham <judge.packham@gmail.com>
2019-01-18drivers: Kconfig: spelling fixesChris Packham1-1/+1
Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-18work_92105: Kconfig: spelling fixesChris Packham1-1/+1
Signed-off-by: Chris Packham <judge.packham@gmail.com>
2019-01-18x86: Kconfig: spelling fixesChris Packham2-2/+2
Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-18arm: Kconfig: spelling fixesChris Packham1-5/+5
Signed-off-by: Chris Packham <judge.packham@gmail.com>
2019-01-18common: spl: Kconfig: spelling fixesChris Packham1-1/+1
Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-18Kconfig: fix spellingChris Packham1-1/+1
Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-18disk: efi: GUIDs should be constHeinrich Schuchardt1-1/+1
Make system_guid const. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-18mach-snapdragon: db410: pinctrl: fix pin countRamon Fried1-3/+3
Pin count in APQ8016 was wrong, fix that. Fixes: ad97051b7ff6 ("mach-snapdragon: Introduce pinctrl driver") Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2019-01-18dts: db410: fix indentationRamon Fried1-1/+1
Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2019-01-17Merge tag 'mips-pull-2019-11-16' of git://git.denx.de/u-boot-mipsTom Rini90-496/+2907
- MIPS: mscc: various enhancements for Luton and Ocelot platforms - MIPS: mscc: added support for Jaguar2 platform - MIPS: optimised SPL linker script - MIPS: bcm6368: fix restart flow issues - MIPS: fixed CONFIG_OF_EMBED warnings for all MIPS boards - MIPS: mt7688: small fixes and enhancements - mmc: compile-out write support if disabled
2019-01-17Merge branch '2019-01-16-master-imports'Tom Rini13-69/+916
- Fixes for CVE-2018-18440 and CVE-2018-18439 - Patch to allow disabling unneeded NAND ECC layouts - Optimize SPI flash env read process
2019-01-17armv8: ls2088ardb: Update MAINTAINERSYork Sun1-0/+1
Signed-off-by: York Sun <york.sun@nxp.com> CC: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2019-01-17armv8: ls1088ardb: Update MAINTAINERSYork Sun1-0/+1
Signed-off-by: York Sun <york.sun@nxp.com> CC: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2019-01-17armv7: dts: ls1021a: Remove aliases property name warningRajesh Bhagat3-11/+11
Remove aliases property name warning while compilation: Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-' Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17pci: layerscape: Add the dts fixup for EP and RCXiaowei Bao1-2/+23
Add the dts fixup when PCI controller work diffferent mode. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17pci: layerscape: Do not scan when PEX work in EP modeXiaowei Bao1-0/+3
Don't scan the bus when the PEX work in EP mode. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17pci: layerscape: Modify the EP and RC mode judge methodXiaowei Bao2-10/+9
Modify the RC and EP mode judge method, save the mode as a variable, the variable will be used by other function. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17ls1046aqds: Bypass xfi port fixup for KR modeFlorinel Iordache1-10/+25
u-boot makes a fixup for LS1046AQDS board to setup the properties 'fixed-link' and 'phy-connection-type' to 'xgmii' but in case of backplane mode this fixup is not correct because it causes the KR link to fail and so it must be bypassed in order to keep the link in KR mode as it is defined in DTS. Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> [YS: Fix compiling warning] Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17armv8: fsl-layerscape: properly configure qdma ICIDLaurentiu Tudor2-1/+6
The ICIDs for the qdma device are not configured through SCFG but through some registers found in the actual device register block. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17mmc: fsl_esdhc: make get_cd work well in dm_mmc_opsYinbo Zhu1-1/+0
This patch is to make get_cd work well when DM_MMC enabled Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17fsl-layerscape: dpaa: fix fsl-mc status in fdt with bootefiMian Yousaf Kaukab6-4/+14
fsl-mc lazyapply command applies dpl from efi_exit_boot_services(). Status of fsl-mc node in working fdt is updated at this stage. However, an efi application like grub may already have copied the fdt. So the updates to fdt done at efi_exit_boot_services() may not be visible to the OS. Fix it by updating fdt earlier if fsl-mc lazyapply command is used. Fixes: b7b8410a8f (ls2080: Exit dpaa only right before exiting U-Boot) Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17armv8: ls1043a: correct the PCIe INTx fixupHou Zhiqiang1-1/+1
On LS1043A rev1.0 there are 4 interrupt pins for INTx, and on rev1.1 there is only 1 for INTx, so the current fixup is inverse of the fact. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17armv8: ls1043a: add SVR definitions for 23x23 package siliconHou Zhiqiang2-0/+5
LS1043A/LS1023A 23x23 package silicon has different SVR:VAR_PER. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
generated by cgit v1.1 at 2024-09-06 09:34:00 +0000