aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-05-18arm: socfpga: Restructure misc driverLey Foon Tan4-349/+400
Restructure misc driver in the preparation to support A10. Move the Gen5 specific code to gen5 file. Change all uint32_t_to u32. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Restructure system managerLey Foon Tan4-123/+138
Restructure system manager in the preparation to support A10. No functional change. Change uint32_t to u32. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Restructure reset manager driverLey Foon Tan5-133/+176
Restructure reset manager driver in the preparation to support A10. Move the Gen5 specific code to gen5 files. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Restructure clock manager driverLey Foon Tan6-816/+867
Restructure clock manager driver in the preparation to support A10. Move the Gen5 specific code to _gen5 files. - Change all uint32_t to u32 and change to use macro BIT(n) for bit shift. - Check return value from wait_for_bit(). So change return type to int for cm_write_with_phase() and cm_basic_init(). Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18usb: lpc32xx: add i2c DM supportLiam Beguin1-18/+46
Add DM support for i2c functions. Signed-off-by: Liam Beguin <lbeguin@tycoint.com> Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-18pinctrl: imx: fix memory leakPeng Fan1-0/+4
Each time set_state is called, a new piece memory will be allocated for pin_data, but not freed, this will incur memory leak. When error, the devm API could not free memory automatically. So need call devm_kfree when error. Issue reported by Coverity Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18imx: mx7dsabresd: fix secure config after switching to DMStefano Babic1-2/+24
mx7dsabresd_secure_defconfig was not updated after moving to DM. Signed-off-by: Stefano Babic <sbabic@denx.de>
2017-05-18imx: mx7dsabresd: switch to DM USBPeng Fan3-28/+1
Switch to use DM USB. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2017-05-18imx: mx7dsabresd: reset ENET_RST_BPeng Fan1-0/+17
Reset ENET_RST_B to make ENET function stable. Since DM_GPIO enabled, we use "gpio_spi@0_5" which corresponds to ENET_RST_B. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18imx: mx7dsabresd: enable more DM driversPeng Fan3-283/+37
Enable more DM drivers. The imx I2C/MMC DM drivers needs DM_GPIO enabled. The 74x164 drivers needs SOFT_SPI and DM_GPIO enabled. So needs to enable them together. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18gpio: 74x164: make oe-pins optionalPeng Fan1-2/+1
Make oe-pins optional because some boards have fixed it to enable. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-18spi: kconfig: add soft spi Kconfig entryPeng Fan1-0/+6
Add the Kconfig entry for SOFT_SPI which uses gpio to simulate the SPI signals. We use it for accessing 74x164 on some i.MX boards. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Jagan Teki <jagan@openedev.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18arm: dts: imx7d-sdb: add usdhc supportPeng Fan1-0/+73
Add usdhc support Signed-off-by: Peng Fan <peng.fan@nxp.com>
2017-05-18arm: dts: imx7d-sdb: add i2c supportPeng Fan1-0/+146
Add i2c support. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18arm: dts: imx7d-sdb: add regulator node for usb and mmcPeng Fan1-0/+36
Add regulator node for usb and mmc. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18arm: dts: imx7d-sdb: add spi gpio nodePeng Fan1-0/+35
Add spi gpio node for 74LV595. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18arm: dts: imx7d-sdb add basic dtsPeng Fan3-2/+23
Add basic dts for i.MX7D-SDB board. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18arm: dts: imx7: sync with LinuxPeng Fan6-251/+1657
Sync with Linux commit 308ac756("Merge tag 'gpio-v4.11-3'"). Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-05-18imx: ventana: update imx wdog external reset dt propertyTim Harvey1-13/+12
Early backports of the imx wdog external reset feature occured before the property was accepted upstream and used 'ext-reset-output' instead of 'fsl,ext-reset-output'. In order to support older kernels remove both properties. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-05-18imx: ventana: fix GW520x external watchdog dt updateTim Harvey1-8/+8
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-05-18mx6sabresd: Remove non-SPL targetsFabio Estevam4-388/+0
Now that mx6sabresd_spl_defconfig can be used to boot all mx6sabresd variants, the non-SPL targets can be safely removed. Signed-off-by: Fabio Estevam <fabio.estvam@nxp.com>
2017-05-18mx6sabresd: Add SPL support for the mx6dl variantFabio Estevam1-0/+88
Add support for the mx6dlsabresd board in SPL. Retrieved the DCD table from: board/freescale/mx6sabresd/mx6dlsabresd.cfg (NXP U-Boot branch imx_v2015.04_4.1.15_1.0.0_ga) Flashed SPL and u-boot.img to an SD card and could successfully boot it on mx6q, mx6qp and mx6dl sabresd boards. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-05-18mx6sabresd: Prepare for supporting MX6DLFabio Estevam2-124/+131
Currently only MX6Q/QP sabresd boards are supported in SPL. In order to also support MX6DL we need to convert to using IOMUX_PADS and SETUP_IOMUX_PADS macros. Other than that move the <asm/arch/mx6-ddr.h> header inclusion to the SPL code block in order to avoid build error. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-05-18engicam: common: Move board_late_initJagan Teki6-83/+32
Move board_late_init into common area from supported boards. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18engicam: common: Move common board codeJagan Teki7-147/+81
Move possible common board code into common area from supported boards. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18geam6/isiot: Move the spl code commonJagan Teki4-245/+91
SPL code for geam6 and isiot are same, so move them in common area. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18icorem6[_rqs]: Move the spl code commonJagan Teki4-570/+314
SPL code for icorem6 and icorem6_rqs are same, so move them in common area. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18i.MX6UL: isiot: Add SETUP_IOMUX_PADSJagan Teki1-41/+39
Add generic SETUP_IOMUX_PADS function, for imx6ul mux pads and use them in Is.IoT board. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18isiot: Fix to use usdhc2_pads for mmc2Jagan Teki1-1/+1
mmc2 in Is.IoT using usdhc1_pads instead usdhc2_pads, so update the same. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18i.MX6UL: geam6ul: Add SETUP_IOMUX_PADSJagan Teki2-30/+35
Add generic SETUP_IOMUX_PADS function, for imx6ul mux pads. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18icorem6: Use drive strength macrosJagan Teki2-140/+140
Use driver strength macros instead of hex numbers. - IMX6DQ_DRIVE_STRENGTH - 0x30 - IMX6SDL_DRIVE_STRENGTH - 0x28 Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18icorem6: Use proper iomux_ddr_regs drive strength valuesJagan Teki2-58/+58
Usually the drive strength values for DQ and SDL are 0x30 and 0x28 respectively, update them accordingly. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18engicam: Move uart mux init to SPLJagan Teki4-68/+40
Since, u-boot handle fdt through uart so move the UART code to SPL instead make it to global area. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18icorem6: Make SPL to pick suitable fdtJagan Teki11-177/+33
SPL FIT is able to pick the suitable fdt file for u-boot, so add that function through board_fit_config_name_match. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18engicam: Set fdt_file env during run-timeJagan Teki19-15/+21
Set fdt_file env variable during board_late_init Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18geam6ul: Add mmc_late_initJagan Teki2-2/+22
Let the runtime code can set the mmcdev and mmcroot based on the devno using mmc_get_env_dev instead of defining separately in build-time configs using mmc_late_init func. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18geam6ul: Add modeboot env via board_late_initJagan Teki3-19/+36
Add runtime, modeboot env which is setting mmcboot, or nandboot based on the bootdevice so-that conditional macros b/w MMC and NAND for CONFIG_BOOTCOMMAND should be avoided in config files. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18icorem6: Add mmc_late_initJagan Teki2-2/+22
Let the runtime code can set the mmcdev and mmcroot based on the devno using mmc_get_env_dev instead of defining separately in build-time configs using mmc_late_init func. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18icorem6: Add modeboot env via board_late_initJagan Teki3-20/+36
Add runtime, modeboot env which is setting mmcboot, or nandboot based on the bootdevice so-that conditional macros b/w MMC and NAND for CONFIG_BOOTCOMMAND should be avoided in config files. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18imx-common: rdc-sema: correct return valuePeng Fan1-1/+1
When unlock, if caller is not the sema owner, return -EACCES, not 1. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18thermal: imx: fix calculationPeng Fan1-4/+6
Fix calculation. do_div can not handle negative values. Use div_s64_rem to handle the calculation. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18imx: thermal: update imx6 thermal driver according new equationPeng Fan1-17/+21
>From IC guys: " After a thorough accuracy study of the Temp sense circuit, we found that with our current equation, an average part can read 7 degrees lower than a known forced temperature. We also found out that the standard variance was around 2C; which is the tightest distribution that we could create. We need to change the temp sense equation to center the average part around the target temperature. " New equation: Tmeas = (Nmeas - n1) / slope + t1 + offset n1= fused room count t1= 25 offset=3.580661 slope= 0.4148468 – 0.0015423*n1 According the new equation, update the thermal driver. c1 and c2 changed to u64 type and update comments. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18imx-common: timer: clean upPeng Fan1-3/+0
Drop the unneeded code. lib/time.c use timebase_l/h. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-05-18mx25pdk: Add fuse API supportFabio Estevam1-0/+4
Select CONFIG_FSL_IIM and CONFIG_CMD_FUSE so that the fuse API can be used. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-05-18net: fec_mxc: specify the registered eth index by dev_idAndy Duan1-2/+9
Specify the registered eth index by dev_id. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2017-05-18net: fec_mxc: avoid transfer dev_id -1 to get mac address from fuseAndy Duan1-2/+2
Avoid transfer parameter dev_id value with "-1" to .fec_get_hwaddr(), it should transfer fec->dev_id to get mac address from fuse. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Stefano Babic <sbabic@denx.de>
2017-05-18net: fec: do not access reserved register for i.MX6ULLPeng Fan1-1/+1
The MIB RAM and FIFO receive start register does not exist on i.MX6ULL. Accessing these register will cause enet not work well or cause system report fault. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2017-05-17Merge git://git.denx.de/u-boot-uniphierTom Rini23-24/+336
- Add workaround code to make LD20 SoC boot from ARM Trusted Firmware - Sync DT with Linux to fix DTC warnings - Add new SoC support code - Misc fix, updates
2017-05-17Merge git://git.denx.de/u-boot-x86Tom Rini44-117/+1008
2017-05-17ARM: uniphier: add more init code for PXs3Masahiro Yamada9-1/+76
Add the boot device table and reset deassertion for eMMC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
generated by cgit v1.1 at 2024-08-03 08:12:33 +0000