aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-01-25arm64: mvebu: Armada 7040-db: Add SDHCI device tree nodesStefan Roese1-0/+14
This patch adds the SDHCI device tree nodes to the Armada 7040-db dts file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
2017-01-25arm64: mvebu: Armada 7k/8k: Add SDHCI device tree nodesStefan Roese2-0/+16
This patch adds the SDHCI device tree nodes to the Armada AP806 dtsi file which is used by the Armada 7k/8K SoCs. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
2017-01-25arm64: mvebu: Enable SDHCI/MMC support for the db-88f3720Stefan Roese2-1/+8
This patch enables the MMC support for the SDHCI controller on the Armada 3700 db-88f3720 board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
2017-01-25arm64: mvebu: Armada 3720-db: Add SDHCI device tree nodesStefan Roese1-0/+21
This patch adds the SDHCI device tree nodes to the Armada 3700-db dts file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
2017-01-25arm64: mvebu: Armada 3700: Add SDHCI device tree nodesStefan Roese1-0/+16
This patch adds the SDHCI device tree nodes to the Armada 3700 dtsi file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
2017-01-25mmc: Add Marvell Xenon SDHCI controller driverStefan Roese3-0/+509
This driver implementes platform specific code for the Xenon SDHCI controller which is integrated in the Marvell MVEBU Armada 37xx and Armada 7k / 8K SoCs. History: This driver is ported from the Marvell U-Boot version 2015.01 which is written by Victor Gu <xigu@marvell.com> with minor changes ported from the Linux driver which is written by Ziji Hu <huziji@marvell.com>. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2017-01-25mmc: sdhci: Add support for optional controller specific set_ios_post()Stefan Roese2-0/+5
Some SDHCI drivers might need to do some special controller configuration after the common clock set_ios() function has been called (speed / width configuration). This patch adds a call to the newly created function set_ios_port() when its configured in the host driver. This will be used by the Xenon SDHCI controller driver used on the Marvell Armada 3700 and 7k/8k ARM64 SoCs. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2017-01-25mmc: sdhci: Clear SDHCI_CLOCK_CONTROL before configuring the new valueStefan Roese1-4/+2
This patch completely clears the SDHCI_CLOCK_CONTROL register before the new value is configured instead of just clearing the 2 bits SDHCI_CLOCK_CARD_EN and SDHCI_CLOCK_INT_EN. Without this change, some clock configurations will lead to the "Internal clock never stabilised." error message on the Xenon SDHCI controller used on the Marvell Armada 3700 and 7k/8k ARM64 SoCs. The Linux SDHCI core driver also writes 0 to this register before the new value is configured. So this patch simplifies the driver a bit and brings the U-Boot driver more in-line with the Linux one. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2017-01-24travis-ci: Add swig and libpython-dev to the package listTom Rini1-0/+2
As part of 1905c8fc711a we introduced failures depending on if swig and libpython-dev are installed or not. To provide coverage for this are of code in the future ensure we have these packages installed. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-01-24mach-omap2: Cleanup secure boot media generationAndrew F. Davis1-10/+28
Currently all secure media types of SPL are generated for all platforms, all platforms do not need all types, only generate the media types valid for each platform. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-01-24tools: Correct python building host toolsTom Rini1-1/+2
When we have python building tools for the host it will not check HOSTXX variables but only XX variables, for example LDFLAGS and not HOSTLDFLAGS. Cc: Simon Glass <sjg@chromium.org> Reported-by: Heiko Schocher <hs@denx.de> Fixes: 1905c8fc711a ("build: Always build the libfdt python module") Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Schocher <hs@denx.de>
2017-01-24bootz/booti: relocate ramdisk if CONFIG_SYS_BOOT_RAMDISK_HIGH setCédric Schieli2-0/+6
In commit c2e7e72, the ramdisk relocation code was moved from image_setup_linux to do_bootm, leaving the bootz and booti cases broken. This patch fixes both by adding the BOOTM_STATE_RAMDISK state in their call to do_bootm_states if CONFIG_SYS_BOOT_RAMDISK_HIGH is set. Signed-off-by: Cédric Schieli <cschieli@gmail.com> Reviewed-by: Rick Altherr <raltherr@google.com> Tested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-24arm: am57xx: cl-som-am57x: fix EthernetUri Mashiach2-3/+3
The module is continuously rebooting with the following message: Net: data abort pc : [<fff77f42>] lr : [<fff6e32b>] reloc pc : [<80816f42>] lr : [<8080d32b>] sp : fdf5ce48 ip : fdf5d79c fp : 00000017 r10: 8083cd58 r9 : fdf5cef0 r8 : fdf5d5d0 r7 : 48485000 r6 : 400000ff r5 : fdf5d6e0 r4 : fdf5d618 r3 : fdf5d5b4 r2 : fdf5d5d0 r1 : 643a3631 r0 : fdf5d6e0 Flags: nzCv IRQs off FIQs off Mode SVC_32 Resetting CPU ... Modifications: * Enable Ethernet configuration in the SPL. * Update PINMUX of PHY enable GPIO. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-01-24Kconfig: Migrate BOARD_LATE_INIT to a selectTom Rini305-281/+146
This option should not really be user selectable. Note that on PowerPC we currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so be conditional on that. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> (for UniPhier)
2017-01-24NXP: Introduce board/freescale/common/Kconfig and migrate CHAIN_OF_TRUSTTom Rini30-13/+66
Introduce board/freescale/common/Kconfig so that we have a single place for CONFIG options that are shared between ARM and PowerPC NXP platforms. Cc: York Sun <york.sun@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-01-24imx31_phycore: Split the eet variant out into a different TARGETTom Rini4-5/+8
Rename CONFIG_IMX31_PHYCORE_EET to CONFIG_TARGET_IMX31_PHYCORE_EET and make this a distinct config target. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-24rpi: Fix device tree path on ARM64Tuomas Tynkkynen1-21/+27
The directory structure of device tree files produced by the kernel's 'make dtbs_install' is different on ARM64, the RPi3 device tree file is in a 'broadcom' subdirectory there. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2017-01-23mmc: Print error code for mmc_complete_init failureJagan Teki1-1/+3
Print the error code for non-zero (failure case) instead of making debug statement without any condition, this usually gives proper clue in failure condition. Log:
2017-01-23mmc: sdhci: Distinguish between base clock and maximum peripheral frequencyStefan Herbrechtsmeier13-34/+52
The sdhci controller assumes that the base clock frequency is fully supported by the peripheral and doesn't support hardware limitations. The Linux kernel distinguishes between base clock (max_clk) of the host controller and maximum frequency (f_max) of the card interface. Use the same differentiation and allow the platform to constrain the peripheral interface. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
2017-01-22Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini55-415/+934
- Allow to disable SPL (mainly for ATF) - Refactor SoC init code - Update DRAM settings - Add PXs3 SoC support (DT, pinctrl driver, SoC code)
2017-01-22ARM: uniphier: add PXs3 SoC supportMasahiro Yamada9-0/+31
Initial support for PXs3 SoC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22ARM: dts: uniphier: add PXs3 SoC/board supportMasahiro Yamada3-0/+381
Initial commit for the PXs3 SoC DT. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22pinctrl: uniphier: support UniPhier PXs3 pinctrl driverMasahiro Yamada3-9/+156
Add pin configuration and pinmux support for UniPhier PXs3 SoC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22ARM: dts: uniphier: compile only DT files that make senseMasahiro Yamada1-9/+18
All the UniPhier DT files are compiled if CONFIG_ARCH_UNIPHIER is enabled, but not all of them actually work. For example, when U-Boot is compiled for ARM 32 bit, 64 bit DT files are also built, and vice versa. Compile only the combination that makes sense. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22ARM: uniphier: add macro to generate SoC data look-up functionMasahiro Yamada3-33/+23
There are similar functions that look up SoC data by the SoC ID. The new macro UNIPHIER_DEFINE_SOCDATA_FUNC will be helpful to avoid the code duplication. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22ARM: uniphier: simplify SoC ID get functionMasahiro Yamada17-317/+214
Currently, uniphier_get_soc_type() converts the SoC ID (this is read from the revision register) to an enum symbol to use it for SoC identification. Come to think of it, there is no need for the conversion in the first place. Using the SoC ID from the register as-is a straightforward way. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22ARM: uniphier: replace <common.h> with <linux/delay.h> where possibleMasahiro Yamada4-4/+5
The <common.h> includes too many headers. Actually, these files needed to include it for udelay() declaration. Now we can replace it with <linux/delay.h> thanks to commit 5bc516ed661a ("delay: collect {m, n, u}delay declarations to include/linux/delay.h"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22ARM: uniphier: replace <linux/err.h> with <linux/errno.h>Masahiro Yamada13-14/+16
These files only need error number macros. Actually, IS_ERR(), PTR_ERR(), ERR_PTR(), etc. are not useful for U-Boot. Avoid unnecessary header includes. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22ARM: uniphier: add uniphier_v8_defconfigMasahiro Yamada1-0/+34
This defconfig does not support SPL. If you use this, the basic SoC initialization must be done in firmware that runs before U-Boot. (Generally, ARM Trusted Firmware is expected to do this job). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22ARM: uniphier: make SPL optional for ARVv8 SoCsMasahiro Yamada11-30/+56
We may want to run different firmware before running U-Boot. For example, ARM Trusted Firmware runs before U-Boot, making U-Boot a non-secure world boot loader. In this case, the SoC might be initialized there, which enables us to skip SPL entirely. This commit removes "select SPL" to make it configurable. This also enables the Multi SoC support for the UniPhier ARMv8 SoCs. (CONFIG_ARCH_UNIPHIER_V8_MULTI) Thanks to the driver model and Device Tree, the U-Boot proper part is now written in a generic way. The board/SoC parameters reside in DT. The Multi SoC support increases the memory footprint a bit, but the U-Boot proper does not have strict memory constraint. This will mitigate the per-SoC (sometimes per-board) defconfig burden. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22ARM: uniphier: add missing static and const qualifierMasahiro Yamada1-3/+3
These are file-internal and constant. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22ARM: uniphier: fix delay fixup code in LD11 UMC initKotaro Hayashi1-0/+1
The ddrphy_shift_rof_hws() never writes back the shifted delay value to the register, which makes this function non-effective. Signed-off-by: Kotaro Hayashi <hayashi.kotaro@socionext.com> [masahiro: add git log] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22ARM: uniphier: update UMC_MEMMAPSET value for LD20 SoCWataru Okoshi1-2/+2
Change bnk_typ's value from 8 to 0 (for G1's performance). Signed-off-by: Wataru Okoshi <okoshi.wataru@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21travis-ci: Split p1_p2_rdb_pc and p1010rdb into separate jobsTom Rini1-1/+3
On occasion the job that does these two build types will hit the time limit so split this in two. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-21status_led: Kconfig migrationUri Mashiach89-454/+486
Move all of the status LED feature to drivers/led/Kconfig. The LED status definitions were moved from the board configuration files to the defconfig files. TBD: Move all of the definitions in the include/status_led.h to the relevant board's defconfig files. Tested boards: CL-SOM-AM57x, CM-T335 Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2017-01-21status_led: Kconfig migration - introductionUri Mashiach3-34/+355
Move all of the status LED feature to drivers/led/Kconfig. doc/README.LED updated to reflect the Kconfig implementation. Tested boards: CL-SOM-AM57x, CM-T335 Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2017-01-21config: Move CONFIG_BOARD_LATE_INIT to defconfigsJagan Teki375-280/+338
Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jagan@openedev.com>
2017-01-21common: Kconfig: Add BOARD_LATE_INIT entryJagan Teki1-0/+10
This patch add Kconfig entry for CONFIG_BOARD_LATE_INIT Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jagan@openedev.com>
2017-01-20mx6saberesd_spl: Correct falcon mode additionTom Rini2-2/+3
When falcon mode support was added, it was right around when SPL_OS_BOOT was migrated to Kconfig. So first we must move the enablement to the defconfig file. Next, it turned off EXT support rather than add the information to allow for falcon mode from EXT. Add this information so that the board compiles after 5d28b930f237. Fixes: d96796ca23b2 ("mx6sabresd: Add Falcon mode support") Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-20bootm: qnx: Disable data cache before booting QNX imageEmmanuel Vadot2-11/+12
Instead of disabling the data cache in the bootelf command, disabling it in the do_bootm_qnxelf function. Some ELF binary might want the cache enabled. Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com>
2017-01-20tools: mkimage: fix sizeof_mismatch found by coveritySven Ebenfeld1-1/+1
Reported-by: Coverity (CID: 155214) Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com>
2017-01-20ARM: OMAP5+: Remove unsed dpll structuresLokesh Vutla1-55/+4
Latest gcc compile strted complaining about defined structure definition that are not used. Remove the unused sturctures. Reported-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-01-20ARM: OMAP4: Fix compiler warningLokesh Vutla1-1/+3
Latest gcc 6.2 compiler is throwing the below warning for omap4_panda_defconfig arch/arm/mach-omap2/omap4/hw_data.c:136:3: warning: 'abe_dpll_params_sysclk_196608khz' defined but not used [-Wunused-const-variable=] abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { Fix this by guarding it with CONFIG_SYS_OMAP_ABE_SYSCK Reported-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-01-20binman: add tools directory to the python pathEmmanuel Vadot1-0/+1
The built _libfdt.so is placed in the /tools dir and need to say here as it contains relative paths. Add the directory to the python path so binman can use this module. Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com>
2017-01-20build: Always build the libfdt python moduleEmmanuel Vadot1-1/+1
Do not rely on CONFIG_SPL_OF_PLATDATA to build the libfdt python module. If swig is present, this will be build Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com>
2017-01-20MAINTAINERS: DFU: Change e-mail address of DFU maintanierLukasz Majewski1-1/+1
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-01-20odroid-c2: Enable distro bootAndreas Färber4-1/+17
Use the generic "distro" boot framework to enable automatic DHCP boot. MMC and USB are not yet implemented, so this is the only boot option. The fdt and kernel addresses are adopted from downstream; ramdisk and scriptaddr addresses were chosen arbitrarily. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Alexander Graf <agraf@suse.de>
2017-01-20meson: misc_init_r is board-specificAndreas Färber2-1/+2
Move it from meson-gxbb-common.h to odroid-c2.h to allow new boards not to implement it. Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-01-20board_init.c: Always use memset()Tom Rini1-18/+0
We can make the code read more easily here by simply using memset() always as when we don't have an optimized version of the function we will still have a version of this function around anyhow. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-01-20ARM: Default to using optimized memset and memcpy routinesTom Rini15-6/+48
We have long had available optimized versions of the memset and memcpy functions that are borrowed from the Linux kernel. We should use these in normal conditions as the speed wins in many workflows outweigh the relatively minor size increase. However, we have a number of places where we're simply too close to size limits in SPL and must be able to make the size vs performance trade-off in those cases. Cc: Philippe Reynes <tremyfr@yahoo.fr> Cc: Eric Jarrige <eric.jarrige@armadeus.org> Cc: Heiko Schocher <hs@denx.de> Cc: Magnus Lilja <lilja.magnus@gmail.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Chander Kashyap <k.chander@samsung.com> Cc: Akshay Saraswat <akshay.s@samsung.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-16 23:43:55 +0000